U-Boot SPL 2020.01-rc1 (Feb 05 2020 - 07:21:09 +0100)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2020.01-rc1 (Feb 05 2020 - 07:21:09 +0100) Allwinner Technology

CPU:   Allwinner A10 (SUN4I)
Model: Mele A1000
I2C:   ready
DRAM:  512 MiB
MMC:   mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

HDMI connected: Setting up a 1920x1200 dvi console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Net:   
Error: ethernet@1c0b000 address not set.
eth-1: ethernet@1c0b000
starting USB...
No working controllers found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
175 bytes read in 10 ms (16.6 KiB/s)
1:	LibreELEC
Retrieving file: /KERNEL
8738408 bytes read in 711 ms (11.7 MiB/s)
append: boot=UUID=0502-3041 disk=UUID=6e49efd9-c011-4553-987f-cef4015d23c8 quiet console=ttyS0,115200 console=tty1
Retrieving file: /sun4i-a10-a1000.dtb
23347 bytes read in 9 ms (2.5 MiB/s)
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Device Tree to 49ff7000, end 49fffb32 ... OK

Starting kernel ...

[    0.165777] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb1_vbus... Deferring probe
[    1.376003] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present!
[    1.746350] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[    1.754214] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---
Connected.
Connected.

Disconnected.