Paste output
======== /flash/config.txt ==============
======== /flash/cmdline.txt ==============
======== /storage/.kodi/temp/kodi.log ==============
00:00:18.885 T:4095948896 NOTICE: special://profile/ is mapped to: special://masterprofile/
00:00:18.885 T:4095948896 NOTICE: -----------------------------------------------------------------------
00:00:18.885 T:4095948896 NOTICE: Starting Kodi (17.6 Git:a9a7a20). Platform: Linux ARM (Thumb) 32-bit
00:00:18.885 T:4095948896 NOTICE: Using Release Kodi x32 build
00:00:18.885 T:4095948896 NOTICE: Kodi compiled Jan 19 2018 by GCC 6.2.0 for Linux ARM (Thumb) 32-bit version 3.14.29 (200221)
00:00:18.885 T:4095948896 NOTICE: Running on LibreELEC (community): 8.2.3.1, kernel: Linux ARM 64-bit version 3.14.29
00:00:18.885 T:4095948896 NOTICE: FFmpeg version/source: ffmpeg-3.1-kodi
00:00:18.885 T:4095948896 NOTICE: Host CPU: AArch64 Processor rev 4 (aarch64), 4 cores available
00:00:18.885 T:4095948896 NOTICE: ARM Features: Neon enabled
00:00:18.885 T:4095948896 NOTICE: special://xbmc/ is mapped to: /usr/share/kodi/
00:00:18.885 T:4095948896 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/kodi
00:00:18.885 T:4095948896 NOTICE: special://xbmcbinaddons/ is mapped to: /usr/lib/kodi/addons
00:00:18.885 T:4095948896 NOTICE: special://masterprofile/ is mapped to: /storage/.kodi/userdata
00:00:18.885 T:4095948896 NOTICE: special://envhome/ is mapped to: /storage
00:00:18.885 T:4095948896 NOTICE: special://home/ is mapped to: /storage/.kodi
00:00:18.886 T:4095948896 NOTICE: special://temp/ is mapped to: /storage/.kodi/temp
00:00:18.886 T:4095948896 NOTICE: special://logpath/ is mapped to: /storage/.kodi/temp
00:00:18.886 T:4095948896 NOTICE: The executable running is: /usr/lib/kodi/kodi.bin
00:00:18.886 T:4095948896 NOTICE: Local hostname: MarinaLibreElec
00:00:18.886 T:4095948896 NOTICE: Log File is located: /storage/.kodi/temp//kodi.log
00:00:18.891 T:4095948896 NOTICE: -----------------------------------------------------------------------
00:00:18.954 T:4095948896 ERROR: DBus: Error org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.UPower was not provided by any .service files
00:00:18.968 T:4095948896 NOTICE: load settings...
00:00:18.969 T:4095948896 NOTICE: AML device detected
00:00:19.086 T:4095948896 NOTICE: Found 2 Lists of Devices
00:00:19.086 T:4095948896 NOTICE: Enumerated ALSA devices:
00:00:19.086 T:4095948896 NOTICE: Device 1
00:00:19.086 T:4095948896 NOTICE: m_deviceName : default
00:00:19.086 T:4095948896 NOTICE: m_displayName : Default (AML-M8AUDIO Analog)
00:00:19.086 T:4095948896 NOTICE: m_displayNameExtra: PCM
00:00:19.086 T:4095948896 NOTICE: m_deviceType : AE_DEVTYPE_PCM
00:00:19.086 T:4095948896 NOTICE: m_channels : FL,FR,UNKNOWN1,LFE,BL,BR,FC,BC,BLOC,BROC
00:00:19.086 T:4095948896 NOTICE: m_sampleRates : 32000,44100,48000,88200,96000,176400,192000
00:00:19.086 T:4095948896 NOTICE: m_dataFormats : AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE
00:00:19.086 T:4095948896 NOTICE: m_streamTypes : No passthrough capabilities
00:00:19.086 T:4095948896 NOTICE: Device 2
00:00:19.087 T:4095948896 NOTICE: m_deviceName : hdmi:CARD=AMLM8AUDIO,DEV=0
00:00:19.087 T:4095948896 NOTICE: m_displayName : AML-M8AUDIO
00:00:19.087 T:4095948896 NOTICE: m_displayNameExtra: HDMI
00:00:19.087 T:4095948896 NOTICE: m_deviceType : AE_DEVTYPE_HDMI
00:00:19.087 T:4095948896 NOTICE: m_channels : FL,FR,BL,BR,FC,LFE,SL,SR
00:00:19.087 T:4095948896 NOTICE: m_sampleRates : 32000,44100,48000,88200,96000,176400,192000
00:00:19.087 T:4095948896 NOTICE: m_dataFormats : AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
00:00:19.087 T:4095948896 NOTICE: m_streamTypes : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
00:00:19.087 T:4095948896 NOTICE: Enumerated PULSE devices:
00:00:19.087 T:4095948896 NOTICE: Device 1
00:00:19.087 T:4095948896 NOTICE: m_deviceName : Default
00:00:19.087 T:4095948896 NOTICE: m_displayName : Default
00:00:19.087 T:4095948896 NOTICE: m_displayNameExtra: Bluetooth Audio (PULSEAUDIO)
00:00:19.087 T:4095948896 NOTICE: m_deviceType : AE_DEVTYPE_PCM
00:00:19.087 T:4095948896 NOTICE: m_channels : FL,FR
00:00:19.087 T:4095948896 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
00:00:19.087 T:4095948896 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
00:00:19.087 T:4095948896 NOTICE: m_streamTypes : No passthrough capabilities
00:00:19.104 T:4095948896 NOTICE: Loaded settings file from special://xbmc/system/advancedsettings.xml
00:00:19.104 T:4095948896 NOTICE: Contents of special://xbmc/system/advancedsettings.xml are...
false
30
00:00:19.106 T:4095948896 NOTICE: No settings file to load (special://masterprofile/advancedsettings.xml)
00:00:19.106 T:4095948896 NOTICE: Default Video Player: VideoPlayer
00:00:19.106 T:4095948896 NOTICE: Default Audio Player: paplayer
00:00:19.106 T:4095948896 NOTICE: Disabled debug logging due to GUI setting. Level 0.
00:00:19.106 T:4095948896 NOTICE: Log level changed to "LOG_LEVEL_NORMAL"
00:00:19.106 T:4095948896 NOTICE: CMediaSourceSettings: loading media sources from special://masterprofile/sources.xml
00:00:19.160 T:4095948896 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
00:00:19.161 T:4095948896 NOTICE: Loaded playercorefactory configuration
00:00:19.161 T:4095948896 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
00:00:19.161 T:4095948896 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
00:00:19.258 T:4095948896 NOTICE: Running database version Addons27
00:00:19.402 T:4095948896 NOTICE: ADDONS: Using repository repository.kodi.game
00:00:19.402 T:4095948896 NOTICE: ADDONS: Using repository repository.libreelec.tv
00:00:19.402 T:4095948896 NOTICE: ADDONS: Using repository repository.xbmc.org
00:00:19.465 T:4095948896 ERROR: AML: no rw on /sys/class/ppmgr/ppmgr_3d_mode
00:00:19.490 T:4095948896 NOTICE: InitWindowSystem: Using EGL Implementation: amlogic
00:00:19.527 T:4095948896 ERROR: GetString: error reading /storage/.kodi/userdata/disp_cap
00:00:19.527 T:4095948896 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 60.000000 Hz
00:00:19.527 T:4095948896 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 59.940060 Hz
00:00:19.527 T:4095948896 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 60.000000 Hz
00:00:19.527 T:4095948896 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 59.940060 Hz
00:00:19.527 T:4095948896 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 60.000000 Hz
00:00:19.527 T:4095948896 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 59.940060 Hz
00:00:19.527 T:4095948896 NOTICE: Found (1920x1080@60.000000) at 20, setting to RES_DESKTOP at 16
00:00:19.527 T:4095948896 NOTICE: Checking resolution 16
00:00:19.771 T:4095948896 NOTICE: GL_VENDOR = ARM
00:00:19.771 T:4095948896 NOTICE: GL_RENDERER = Mali-450 MP
00:00:19.771 T:4095948896 NOTICE: GL_VERSION = OpenGL ES 2.0
00:00:19.771 T:4095948896 NOTICE: GL_SHADING_LANGUAGE_VERSION = OpenGL ES GLSL ES 1.00
00:00:19.771 T:4095948896 NOTICE: GL_EXTENSIONS = GL_OES_texture_npot GL_OES_vertex_array_object GL_OES_compressed_ETC1_RGB8_texture GL_EXT_compressed_ETC1_RGB8_sub_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_vertex_half_float GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness GL_OES_depth_texture_cube_map GL_KHR_debug GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_OES_mapbuffer
00:00:20.453 T:4008698784 NOTICE: Running database version Addons27
00:00:20.458 T:4008698784 NOTICE: Running database version ViewModes6
00:00:20.611 T:4008698784 NOTICE: Running database version Textures13
00:00:20.612 T:3981439904 NOTICE: Register - new cec device registered on cec->AOCEC: CEC Adapter (0000:0000)
00:00:20.627 T:4008698784 NOTICE: Running database version MyMusic60
00:00:20.708 T:4008698784 NOTICE: Running database version MyVideos107
00:00:20.717 T:4008698784 NOTICE: Running database version TV29
00:00:20.727 T:4008698784 NOTICE: Running database version Epg11
00:00:20.734 T:4095948896 NOTICE: start dvd mediatype detection
13:04:28.226 T:4095948896 WARNING: JSONRPC: Could not parse type "Setting.Details.SettingList"
13:04:28.528 T:4095948896 NOTICE: initialize done
13:04:28.528 T:4095948896 NOTICE: Running the application...
13:04:28.541 T:4095948896 NOTICE: starting zeroconf publishing
13:04:28.542 T:4095948896 NOTICE: CWebServer[8080]: Started
13:04:28.542 T:4095948896 NOTICE: starting upnp client
13:04:28.559 T:3818910624 NOTICE: ES: Starting UDP Event server on port 9777
13:04:28.559 T:3818910624 NOTICE: UDP: Listening on port 9777 (ipv6 : false)
13:04:29.018 T:3892310944 WARNING: CSkinInfo: failed to load skin settings
13:04:30.045 T:3892310944 ERROR: ## LibreELEC Addon ## oe::load_url(https://sx05.eu/releases/releases.json) ## ERROR: (URLError(SSLError(1, u'[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)'),))
13:04:30.046 T:3892310944 ERROR: Traceback (most recent call last):
File "/home/kszaq/LibreELEC.tv/build.LibreELEC-S905.arm-8.2-devel/LibreELEC-settings-f3bf1f2/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 271, in load_url
File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen
File "/usr/lib/python2.7/urllib2.py", line 429, in open
File "/usr/lib/python2.7/urllib2.py", line 447, in _open
File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
File "/usr/lib/python2.7/urllib2.py", line 1241, in https_open
File "/usr/lib/python2.7/urllib2.py", line 1198, in do_open
URLError:
13:04:31.900 T:3776967584 ERROR: ## LibreELEC Addon ## oe::load_url(https://kszaq.libreelec.tv/updates.php?i=a23416f6501ff7e70e28892f4f8e09b4&d=LibreELEC&pa=S905.arm&v=8.2.3.1&l=0
) ## ERROR: (CertificateError("hostname 'kszaq.libreelec.tv' doesn't match either of 'amlgx.libreelec.tv', 'balbes150.libreelec.tv', 'call.libreelec.net', 'chewitt.libreelec.tv', 'sources.libreelec.tv'",))
13:04:31.902 T:3776967584 ERROR: Traceback (most recent call last):
File "/home/kszaq/LibreELEC.tv/build.LibreELEC-S905.arm-8.2-devel/LibreELEC-settings-f3bf1f2/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/oe.py", line 271, in load_url
File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen
File "/usr/lib/python2.7/urllib2.py", line 429, in open
File "/usr/lib/python2.7/urllib2.py", line 447, in _open
File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
File "/usr/lib/python2.7/urllib2.py", line 1241, in https_open
File "/usr/lib/python2.7/urllib2.py", line 1195, in do_open
File "/usr/lib/python2.7/httplib.py", line 1042, in request
File "/usr/lib/python2.7/httplib.py", line 1082, in _send_request
File "/usr/lib/python2.7/httplib.py", line 1038, in endheaders
File "/usr/lib/python2.7/httplib.py", line 882, in _send_output
File "/usr/lib/python2.7/httplib.py", line 844, in send
File "/usr/lib/python2.7/httplib.py", line 1263, in connect
File "/usr/lib/python2.7/ssl.py", line 363, in wrap_socket
File "/usr/lib/python2.7/ssl.py", line 611, in __init__
File "/usr/lib/python2.7/ssl.py", line 848, in do_handshake
File "/usr/lib/python2.7/ssl.py", line 282, in match_hostname
CertificateError: hostname 'kszaq.libreelec.tv' doesn't match either of 'amlgx.libreelec.tv', 'balbes150.libreelec.tv', 'call.libreelec.net', 'chewitt.libreelec.tv', 'sources.libreelec.tv'
13:04:31.910 T:3776967584 ERROR: ## LibreELEC Addon ## system::check_updates_v2 ## ERROR: (TypeError('expected string or buffer',))
13:04:31.910 T:3776967584 ERROR: Traceback (most recent call last):
File "/home/kszaq/LibreELEC.tv/build.LibreELEC-S905.arm-8.2-devel/LibreELEC-settings-f3bf1f2/.install_pkg/usr/share/kodi/addons/service.libreelec.settings/resources/lib/modules/system.py", line 778, in check_updates_v2
File "/usr/lib/python2.7/json/__init__.py", line 339, in loads
File "/usr/lib/python2.7/json/decoder.py", line 364, in decode
TypeError: expected string or buffer
13:04:32.057 T:4095948896 NOTICE: UDev: Added /var/media/BakerStreet
13:04:34.174 T:3900699552 ERROR: GetDirectory - Error getting
13:04:38.694 T:3900699552 ERROR: Previous line repeats 6 times.
13:04:38.695 T:3900699552 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
13:04:41.886 T:4095948896 NOTICE: VideoPlayer: Opening: /var/media/BakerStreet/MoviesR-S/Ricki and the Flash 2015 Bluray-720p.mkv
13:04:41.887 T:4095948896 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
13:04:41.888 T:3643798432 NOTICE: Creating InputStream
13:04:41.898 T:3643798432 NOTICE: Creating Demuxer
13:04:41.913 T:3643798432 NOTICE: Opening stream: 0 source: 256
13:04:41.913 T:3643798432 NOTICE: Creating video codec with codec id: 28
13:04:41.924 T:3643798432 NOTICE: Creating video thread
13:04:41.924 T:3643798432 NOTICE: Opening stream: 1 source: 256
13:04:41.924 T:3652187040 NOTICE: running thread: video_thread
13:04:41.924 T:3643798432 NOTICE: Finding audio codec for: 86019
13:04:41.925 T:3643798432 NOTICE: Creating audio thread
13:04:41.925 T:3643798432 NOTICE: Opening stream: 2 source: 256
13:04:41.925 T:3660575648 NOTICE: running thread: CVideoPlayerAudio::Process()
13:04:41.936 T:3660575648 NOTICE: Creating audio stream (codec id: 86019, channels: 6, sample rate: 48000, no pass-through)
13:04:41.946 T:3652187040 NOTICE: CAMLCodec::OpenDecoder - using V4L2 pts format: 64Bit
13:04:42.037 T:4095948896 NOTICE: Display resolution ADJUST : 1920x1080 @ 59.94 - Full Screen (21) (weight: 0.000)
13:04:42.467 T:4095948896 NOTICE: VideoPlayer: OnLostDisplay received
13:04:44.038 T:4095948896 NOTICE: VideoPlayer: OnResetDisplay received
13:06:03.151 T:4095948896 NOTICE: Samba is idle. Closing the remaining connections
14:45:13.091 T:4095948896 NOTICE: CVideoPlayer::CloseFile()
14:45:13.091 T:4095948896 NOTICE: VideoPlayer: waiting for threads to exit
14:45:13.101 T:3643798432 NOTICE: CVideoPlayer::OnExit()
14:45:13.101 T:3643798432 NOTICE: Closing stream player 1
14:45:13.101 T:3643798432 NOTICE: Waiting for audio thread to exit
14:45:13.136 T:3660575648 NOTICE: thread end: CVideoPlayerAudio::OnExit()
14:45:13.137 T:3643798432 NOTICE: Closing audio device
14:45:13.245 T:3643798432 NOTICE: Deleting audio codec
14:45:13.246 T:3643798432 NOTICE: Closing stream player 2
14:45:13.246 T:3643798432 NOTICE: waiting for video thread to exit
14:45:13.261 T:3652187040 NOTICE: thread end: video_thread
14:45:13.267 T:3643798432 NOTICE: deleting video codec
14:45:13.297 T:3643798432 NOTICE: Closing stream player 3
14:45:13.304 T:4095948896 NOTICE: VideoPlayer: finished waiting
14:45:13.570 T:4095948896 NOTICE: VideoPlayer: OnLostDisplay received
14:45:13.570 T:4095948896 WARNING: CDVDMessageQueue(audio)::Put MSGQ_NOT_INITIALIZED
14:45:13.570 T:4095948896 WARNING: CDVDMessageQueue(video)::Put MSGQ_NOT_INITIALIZED
14:45:14.401 T:4095948896 NOTICE: CVideoPlayer::CloseFile()
14:45:14.401 T:4095948896 NOTICE: VideoPlayer: waiting for threads to exit
14:45:14.401 T:4095948896 NOTICE: VideoPlayer: finished waiting
14:45:14.401 T:4095948896 NOTICE: CVideoPlayer::CloseFile()
14:45:14.401 T:4095948896 NOTICE: VideoPlayer: waiting for threads to exit
14:45:14.401 T:4095948896 NOTICE: VideoPlayer: finished waiting
16:05:56.017 T:3909088160 WARNING: CSkinInfo: failed to load skin settings
16:05:56.076 T:4095948896 ERROR: Window Translator: Can't find window videolibrary
16:05:56.077 T:4095948896 WARNING: Label Formating: $VAR[GlobalFanartVar] is not defined
16:05:56.159 T:4095948896 ERROR: Control 1000 in window 13001 has been asked to focus, but it can't
======== /storage/.kodi/temp/dmesg.txt ==============
[ 0.000000@0] Initializing cgroup subsys cpuset
[ 0.000000@0] Initializing cgroup subsys cpu
[ 0.000000@0] Initializing cgroup subsys cpuacct
[ 0.000000@0] Linux version 3.14.29 (kszaq@cvm2) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #2 SMP Mon Jan 22 10:57:10 CET 2018
[ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000@0] no prop version_code
[ 0.000000@0] bootconsole [earlycon0] enabled
[ 0.000000@0] fdt Reserved memory table:
[ 0.000000@0] linux,meson-fb: 0x000000003d100000 - 0x000000003f100000 (32 MiB)
[ 0.000000@0] linux,di: 0x000000003b300000 - 0x000000003d100000 (30 MiB)
[ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000003b300000, size 30 MiB
[ 0.000000@0] linux,ion-dev: 0x0000000039300000 - 0x000000003b300000 (32 MiB)
[ 0.000000@0] linux,vdin1_cma: 0x0000000038000000 - 0x0000000039000000 (16 MiB)
[ 0.000000@0] cma: Reserved 16 MiB at 38000000, total cma pages:4096
[ 0.000000@0] linux,ppmgr: 0x0000000039300000 - 0x0000000039300000 (0 MiB)
[ 0.000000@0] linux,codec_mm_cma: 0x0000000027c00000 - 0x0000000033c00000 (192 MiB)
[ 0.000000@0] cma: Reserved 192 MiB at 27c00000, total cma pages:53248
[ 0.000000@0] linux,picdec: 0x0000000039300000 - 0x0000000039300000 (0 MiB)
[ 0.000000@0] Reserved memory: incorrect alignment of CMA region
[ 0.000000@0] linux,codec_mm_reserved: 0x0000000033f00000 - 0x0000000038000000 (65 MiB)
[ 0.000000@0] fdt Reserved memory total: 370 MiB
[ 0.000000@0] cma: Reserved 8 MiB at 27400000, total cma pages:55296
[ 0.000000@0] On node 0 totalpages: 249088
[ 0.000000@0] Normal zone: 5368 pages used for memmap
[ 0.000000@0] Normal zone: 0 pages reserved
[ 0.000000@0] Normal zone: 249088 pages, LIFO batch:31
[ 0.000000@0] psci: probing function IDs from device-tree
[ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0392a5000 s17216 r8192 d23744 u49152
[ 0.000000@0] pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243720
[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= output_rgb=0 cvbsdrv=0 androidboot.firstboot=0 jtag=apee androidboot.hardware=amlogic mac=c4:4e:ac:18:b1:18 androidboot.mac=c4:4e:ac:18:b1:18 bootfromsd console=tty0 systemd.show_status=auto noswap
[ 0.000000@0] logo: osd1
[ 0.000000@0] logo: loaded
[ 0.000000@0] logo: 0x3d800000
[ 0.000000@0] logo: 1080p60hz
[ 0.000000@0] vout_serve: 1080p60hz
[ 0.000000@0] vout_serve: en: 1
[ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
[ 0.000000@0] vout_serve: 1080p60hz
[ 0.000000@0] vout_serve: enable: 1
[ 0.000000@0] logo: get hdmimode: 1080p60hz
[ 0.000000@0] logo: get cvbsmode: 576cvbs
[ 0.000000@0] tv_vout: cvbs performance line = 0
[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000@0] Memory: 602208K/996352K available (6993K kernel code, 820K rwdata, 2664K rodata, 912K init, 2922K bss, 394144K reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
[ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff804150d800 ( 20 MB)
[ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc03d100000 ( 977 MB)
[ 0.000000@0] .init : 0xffffffc0019f0000 - 0xffffffc001ad4340 ( 913 kB)
[ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc0019ef744 ( 9662 kB)
[ 0.000000@0] .data : 0xffffffc001ad5000 - 0xffffffc001ba2208 ( 821 kB)
[ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019eefff]
[ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] arch_multi_cluster:0
[ 0.000000@0] Hierarchical RCU implementation.
[ 0.000000@0] RCU debugfs-based tracing is enabled.
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.008243@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
[ 0.016754@0] Console: colour dummy device 80x25
[ 0.021087@0] console [tty0] enabled
[ 0.024673@0] bootconsole [earlycon0] disabled
[ 0.030049@0] allocated 4194304 bytes of page_cgroup
[ 0.030057@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.030078@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.030094@0] pid_max: default: 32768 minimum: 301
[ 0.030221@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.030234@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.035124@0] Initializing cgroup subsys memory
[ 0.035158@0] Initializing cgroup subsys devices
[ 0.035168@0] Initializing cgroup subsys freezer
[ 0.035177@0] Initializing cgroup subsys blkio
[ 0.035217@0] ftrace: allocating 23817 entries in 94 pages
[ 0.058004@0] /cpus/cpu@0: Missing clock-frequency property
[ 0.058028@0] /cpus/cpu@1: Missing clock-frequency property
[ 0.058039@0] /cpus/cpu@2: Missing clock-frequency property
[ 0.058050@0] /cpus/cpu@3: Missing clock-frequency property
[ 0.059431@0] Meson chip version = RevA (21:A - 82:0)
[ 0.059850@1] CPU1: Booted secondary processor
[ 0.060213@2] CPU2: Booted secondary processor
[ 0.060534@3] CPU3: Booted secondary processor
[ 0.060599@0] Brought up 4 CPUs
[ 0.060632@0] SMP: Total of 4 processors activated.
[ 0.061102@0] devtmpfs: initialized
[ 0.067865@0] instabooting: 0
[ 0.075692@0] cma: cma_init_reserved_areas, use_cma_first:1
[ 0.075772@0] pinctrl core: initialized pinctrl subsystem
[ 0.076290@0] regulator-dummy: no parameters
[ 0.076909@0] NET: Registered protocol family 16
[ 0.079279@0] aml_vdac_init: module init
[ 0.079414@0] register canvas platform driver
[ 0.079488@0] register rdma platform driver
[ 0.080936@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001ae0000
[ 0.081237@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.082170@0] software IO TLB [mem 0x24800000-0x24c00000] (4MB) mapped at [ffffffc024800000-ffffffc024bfffff]
[ 0.082585@0] aml_i2c version: 20140813
[ 0.082786@0] i2c-core: driver [pmu4] using legacy resume method
[ 0.082853@0] codec_mm:codec_mm_module_init
[ 0.083121@0] gxbb_mpll_clk: register mpll_clk_out0 success done
[ 0.083137@0] gxbb_mpll_clk: register mpll_clk_out1 success done
[ 0.083149@0] gxbb_mpll_clk: register mpll_clk_out2 success done
[ 0.083342@0] clk_sys: register PLL sys_pll success done
[ 0.083360@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
[ 0.083370@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
[ 0.083380@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
[ 0.083389@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
[ 0.083398@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
[ 0.083408@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
[ 0.083416@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
[ 0.083425@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
[ 0.083434@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
[ 0.083466@0] gxl_clk: clock initialization complete
[ 0.083657@0] clkmsr: Gxl msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
[ 0.085765@0] aml_iomap: amlogic iomap probe done
[ 0.086205@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
[ 0.087014@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
[ 0.087447@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
[ 0.087476@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
[ 0.087622@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
[ 0.087644@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
[ 0.089930@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
[ 0.089945@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
[ 0.089954@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
[ 0.089964@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
[ 0.089974@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
[ 0.089983@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
[ 0.089992@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000
[ 0.090002@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000
[ 0.091737@0] codec_mm has 2 memory regions
[ 0.091783@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
[ 0.091801@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.091896@0] codec_mm has 2 memory regions
[ 0.091915@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
[ 0.091931@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.093576@0] vpu: driver version: v03
[ 0.093614@0] vpu: load vpu_clk: 666667000Hz(7)
[ 0.093696@0] vpu: vpu_probe OK
[ 0.094926@0] tv_vout: tvout_probe
[ 0.094947@0] tv_vout: chrdev devno 266338304 for disp
[ 0.094956@0] vout_notify: vout_register_server
[ 0.094963@0] tv_vout: register tv module server ok
[ 0.095173@0] tv_vout: create cdev tv
[ 0.095188@0] tv_vout: tvout_probe OK
[ 0.095665@0] canvas_probe reg=00000000c8838000,size=400
[ 0.095693@0] canvas maped reg_base =ffffff800007e000
[ 0.099304@0] rdma_probe
[ 0.310391@0] bio: create slab at 0
[ 0.311215@0] SCSI subsystem initialized
[ 0.311707@0] usbcore: registered new interface driver usbfs
[ 0.311796@0] usbcore: registered new interface driver hub
[ 0.311903@0] usbcore: registered new device driver usb
[ 0.312557@0] i2c-gpio i2c_gpio.38: using pins 172 (SDA) and 173 (SCL)
[ 0.312733@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.312745@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.312808@0] PTP clock support registered
[ 0.313185@0] hdmitx: system: amhdmitx_init
[ 0.313196@0] hdmitx: system: Ver: 2014May6
[ 0.313354@0] hdmitx: system: amhdmitx_probe
[ 0.313645@0] hdmitx: system: not find match init-data
[ 0.313661@0] hdmitx hpd irq = 89
[ 0.314149@0] hdmitx20: Mapped PHY: 0xc0800000
[ 0.314167@0] hdmitx20: Mapped PHY: 0xc1104400
[ 0.314190@0] hdmitx20: Mapped PHY: 0xc8100000
[ 0.314200@0] hdmitx20: Mapped PHY: 0xc8834000
[ 0.314209@0] hdmitx20: Mapped PHY: 0xc883a000
[ 0.314217@0] hdmitx20: Mapped PHY: 0xc883c000
[ 0.314229@0] hdmitx20: Mapped PHY: 0xd0100000
[ 0.314238@0] hdmitx20: Mapped PHY: 0xda83a000
[ 0.314254@0] hdmitx: alread display in uboot 0x10
[ 0.314293@0] avmute set to 1
[ 0.314687@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 0.314707@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[ 0.314724@0] tv_vout: already display in uboot
[ 0.314732@0] vout_serve: vinfo mode is: 1080p60hz
[ 0.314740@0] vout_serve: init mode 1080p60hz
[ 0.314961@0] vout_serve: create_vout_fops OK
[ 0.314970@0] vout_serve: create vout attribute OK
[ 0.314978@0] vout_serve: meson_vout_probe OK
[ 0.315145@0] logo: logo_init
[ 0.315378@0] osd_rdma: osd_rdma_init: rdma_table p=0x27441000,op=0x27441000 , v=0xffffff80001b1000
[ 0.315409@0] rdma_register, rdma_table_addr ffffff80001b3000 rdma_table_addr_phy 27442000 reg_buf ffffffc000292000
[ 0.315424@0] rdma_register success, handle 1 table_size 4096
[ 0.315433@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
[ 0.315454@0] rdma_register, rdma_table_addr ffffff80001b5000 rdma_table_addr_phy 27443000 reg_buf ffffffc000293000
[ 0.315467@0] rdma_register success, handle 2 table_size 4096
[ 0.315476@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
[ 0.315841@0] Advanced Linux Sound Architecture Driver Initialized.
[ 0.318033@0] Switched to clocksource arch_sys_counter
[ 0.321325@0] hdmitx: system: irq 80000002
[ 0.326499@0] FS-Cache: Loaded
[ 0.335400@0] NET: Registered protocol family 2
[ 0.335886@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.335963@0] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.336083@0] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.336152@0] TCP: reno registered
[ 0.336165@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.336195@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.336373@0] NET: Registered protocol family 1
[ 0.336849@0] pwm: probe ok
[ 0.337086@0] wifi: power_on_pin_OD = 0;
[ 0.337101@0] aml_wifi wifi.33: [wifi_dev_probe] no power_on_pin2
[ 0.337135@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm phandle val=25;pwm-channel1=4;pwm-channel2=12
[ 0.337150@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
[ 0.337163@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
[ 0.337175@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
[ 0.337188@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
[ 0.337200@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
[ 0.337213@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
[ 0.337225@0] aml_wifi wifi.33: [pwm_double_channel_conf_dt] wifi pwm dt ok
[ 0.337251@0] aml_wifi wifi.33: [pwm_double_channel_conf] wifi pwm conf ok
[ 0.337301@0] aml_wifi wifi.33: [wifi_dev_probe] dhd_static_buf setup
[ 0.337373@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
[ 0.337387@0] aml_wifi wifi.33: [wifi_dev_probe] interrupt_pin=241
[ 0.337398@0] aml_wifi wifi.33: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
[ 0.337410@0] aml_wifi wifi.33: [wifi_dev_probe] power_on_pin=240
[ 0.337421@0] aml_wifi wifi.33: [wifi_dev_probe] clock_32k_pin=0
[ 0.337680@0] aml_wifi wifi.33: [wifi_setup_dt] wifi_setup_dt
[ 0.337717@0] aml_wifi wifi.33: [wifi_setup_dt] interrupt_pin(241)
[ 0.337735@0] aml_wifi wifi.33: [wifi_setup_dt] power_on_pin(240)
[ 0.337911@0] Unpacking initramfs...
[ 0.389180@0] Freeing initrd memory: 2004K (ffffffc033cc1000 - ffffffc033eb6000)
[ 0.391878@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.400065@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.400493@0] msgmni has been set to 1612
[ 0.401503@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.401590@0] io scheduler noop registered
[ 0.401601@0] io scheduler deadline registered
[ 0.401626@0] io scheduler cfq registered (default)
[ 0.402374@0] meson-rng c8834000.rng: hwrng registered
[ 0.405727@0] loop: module loaded
[ 0.407435@0] tun: Universal TUN/TAP device driver, 1.6
[ 0.407458@0] tun: (C) 1999-2004 Max Krasnyansky
[ 0.411430@0] libphy: stmmac: probed
[ 0.411453@0] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
[ 0.411839@0] PPP generic driver version 2.4.2
[ 0.412070@0] NET: Registered protocol family 24
[ 0.412178@0] usbcore: registered new interface driver smsc95xx
[ 0.412476@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
[ 0.412595@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.412620@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[ 0.412813@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.413088@0] usbcore: registered new interface driver usb-storage
[ 0.413279@0] usbcore: registered new interface driver usbserial
[ 0.413359@0] usbcore: registered new interface driver usbserial_generic
[ 0.413436@0] usbserial: USB Serial support registered for generic
[ 0.413515@0] usbcore: registered new interface driver pl2303
[ 0.413586@0] usbserial: USB Serial support registered for pl2303
[ 0.414065@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001d4000
[ 0.414246@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[ 0.414272@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001d6080
[ 0.414552@0] mousedev: PS/2 mouse device common for all mice
[ 0.414770@0] i2c /dev entries driver
[ 0.415747@0] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.415904@0] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.418009@0] usbcore: registered new interface driver usbhid
[ 0.418088@0] usbhid: USB HID core driver
[ 0.418326@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001d84c0
[ 0.418356@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[ 0.418378@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[ 1.938233@3] console [ttyS0] enabled
[ 1.938340@0] hdmitx: plugin
[ 1.945109@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001da4c0
[ 1.951800@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[ 1.962588@1] hdmitx: system: hdmitx_hdcp_init
[ 1.966043@1] aml_vrtc rtc.32: rtc core: registered aml_vrtc as rtc0
[ 1.972043@1] secmon has 1 memory regions
[ 1.975756@1] secmon: share in base: 0xffffff80001ec000, share out base: 0xffffff80001ee000
[ 1.984036@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
[ 1.991003@1] secmon: probe done
[ 1.994558@1] storage: storage in base: 0xffffff8001600000
[ 1.999695@1] storage: storage out base: 0xffffff8001680000
[ 2.005137@1] storage: storage block base: 0xffffff8001700000
[ 2.010842@1] storage: probe done!
[ 2.014763@1] aml_sd_emmc_probe: line 3594
[ 2.018257@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[ 2.035918@0] EDID Parser:
[ 2.036073@1] aml_sd_emmc_reg_init 1149
[ 2.036301@0] PLUGIN_DVI_OUT
[ 2.036312@0] dump_dtd_info[1762]
[ 2.036313@0] pixel_clock 65535
[ 2.036315@0] h_active 4095
[ 2.036316@0] h_blank 4095
[ 2.036317@0] v_active 4095
[ 2.036318@0] v_blank 4095
[ 2.036320@0] h_sync_offset 0
[ 2.036321@0] h_sync 0
[ 2.036322@0] v_sync_offset 0
[ 2.036323@0] v_sync 0
[ 2.036325@0] dump_dtd_info[1762]
[ 2.036326@0] pixel_clock 65535
[ 2.036328@0] h_active 4095
[ 2.036329@0] h_blank 4095
[ 2.036330@0] v_active 255
[ 2.036331@0] v_blank 0
[ 2.036332@0] h_sync_offset 0
[ 2.036333@0] h_sync 0
[ 2.036334@0] v_sync_offset 0
[ 2.036335@0] v_sync 0
[ 2.036337@0] dump_dtd_info[1762]
[ 2.036338@0] pixel_clock 65535
[ 2.036340@0] h_active 255
[ 2.036341@0] h_blank 255
[ 2.036342@0] v_active 0
[ 2.036343@0] v_blank 0
[ 2.036344@0] h_sync_offset 0
[ 2.036345@0] h_sync 0
[ 2.036346@0] v_sync_offset 0
[ 2.036348@0] v_sync 0
[ 2.036357@0] hdmitx: edid: not find IEEEOUT
[ 2.036359@0] hdmitx: edid: HDMI: set default vic
[ 2.036361@0] hdmitx: edid: check sum invalid
[ 2.036366@0] hdmitx: update RX hdr info 0
[ 2.036371@0] hdmitx: edid: check sum invalid
[ 2.036374@0] hdmitx: edid: blk0 raw data
[ 2.036410@0] 0000000000000000ffffffffffffffff0000000000000000ffffffffffffffff
[ 2.036410@0] 0000000000000000ffffffffffffffff0000000000000000ffffffffffffffff
[ 2.036410@0] 0000000000000000ffffffffffffffff0000000000000000ffffffffffffffff
[ 2.036410@0] 0000000000000000ffffffffffffffff0000000000000000ffffffffffffffff
[ 2.036410@0]
[ 2.036410@0]
[ 2.036437@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[ 2.036445@0] hdmitx: video: get current mode: 1080p60hz
[ 2.036446@0] hdmitx: update rx hdr info 0
[ 2.036448@0] hdmitx: update physcial size: 16 9
[ 2.036470@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
[ 2.036475@0] hdmtix: set audio
[ 2.036485@0] hdmitx tx_aud_src = 0
[ 2.036510@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[ 2.036513@0] hdmitx aud_n_para = 6144
[ 2.036530@0] hdmitx set channel status
[ 2.224933@1] get property: ocr_avail, value:0x00200080
[ 2.231304@1] get property: f_min, value:300000
[ 2.237418@1] get property: f_max, value:100000000
[ 2.243808@1] get property: max_req_size, value:0x00020000
[ 2.250279@1] get property: pinname, str:emmc
[ 2.256050@1] get property: card_type, value:1
[ 2.261760@1] get property: gpio_dat3, str:
[ 2.267176@1] get property: hw_reset, str:
[ 2.272636@1] emmc:pdata->caps = c0000d47
[ 2.276578@1] emmc:pdata->caps2 = 18060
[ 2.280376@1] emmc:pdata->pm_caps = 0
[ 2.284023@0] storage 1, boot 1
[ 2.287098@0] get_storage_dev return 1
[ 2.328042@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.333511@0] aml_sd_emmc_probe: line 3594
[ 2.333941@0] aml_sd_emmc_reg_init 1149
[ 2.336144@0] get property: ocr_avail, value:0x00200080
[ 2.342675@0] get property: f_min, value:400000
[ 2.348759@0] get property: f_max, value:100000000
[ 2.355064@0] get property: max_req_size, value:0x00020000
[ 2.361551@0] get property: irq_in, value:3
[ 2.367225@0] get property: irq_out, value:5
[ 2.373000@0] get property: gpio_cd, str:
[ 2.378370@0] get property: pinname, str:sd
[ 2.383958@0] get property: jtag_pin, str:
[ 2.389469@0] get property: card_type, value:5
[ 2.395177@0] get property: gpio_dat3, str:
[ 2.400605@0] sd:pdata->caps = 7
[ 2.403778@0] sd:pdata->caps2 = 0
[ 2.407056@0] sd:pdata->pm_caps = 0
[ 2.417947@1] emmc: BKOPS_EN bit is not set
[ 2.424221@1] emmc: trying cali 0-th time(s)
[ 2.427152@1] emmc: delay[0]= 1200 padding= 4, bidx=1
[ 2.427858@1] emmc: delay[1]= 1600 padding= 2, bidx=1
[ 2.432878@1] emmc: delay[2]= 1200 padding= 4, bidx=1
[ 2.437863@1] emmc: delay[3]= 1400 padding= 3, bidx=1
[ 2.442871@1] emmc: delay[4]= 1600 padding= 2, bidx=1
[ 2.447868@1] emmc: delay[5]= 1400 padding= 3, bidx=1
[ 2.452876@1] emmc: delay[6]= 1400 padding= 3, bidx=1
[ 2.457873@1] emmc: delay[7]= 1400 padding= 3, bidx=1
[ 2.462880@1] emmc: calibration result @ 0: max(1600), min(1200)
[ 2.468836@1] emmc: line_delay =0x11101202, max_cal_result =1600
[ 2.468976@2] [aml_is_card_insert] card IN
[ 2.478837@1] emmc: base_index_max 1, base_index_min 1
[ 2.483925@1] emmc: clk 100000000 SDR mode tuning start
[ 2.489415@1] emmc: rx_tuning_result[0] = 10
[ 2.493619@1] emmc: rx_tuning_result[1] = 10
[ 2.497844@1] emmc: rx_tuning_result[2] = 10
[ 2.502074@1] emmc: rx_tuning_result[3] = 10
[ 2.506293@1] emmc: rx_tuning_result[4] = 10
[ 2.510524@1] emmc: rx_tuning_result[5] = 10
[ 2.514745@1] emmc: rx_tuning_result[6] = 10
[ 2.518980@1] emmc: rx_tuning_result[7] = 10
[ 2.523200@1] emmc: rx_tuning_result[8] = 10
[ 2.527424@1] emmc: rx_tuning_result[9] = 10
[ 2.531364@1] emmc: best_win_start =0, best_win_size =10
[ 2.536620@1] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
[ 2.543870@1] emmc: gclock =0x100024a, gdelay=0x11101202, gadjust=0x2000
[ 2.548046@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.548087@3] aml_sd_emmc_probe: line 3594
[ 2.560495@1] emmc: support driver strength type 1
[ 2.565178@1] emmc: try set sd/emmc to DDR mode
[ 2.569573@1] emmc: try set sd/emmc to DDR mode
[ 2.570205@2] normal card in
[ 2.570527@3] aml_sd_emmc_reg_init 1149
[ 2.570589@3] get property: ocr_avail, value:0x00200080
[ 2.570591@3] get property: f_min, value:400000
[ 2.570594@3] get property: f_max, value:200000000
[ 2.570597@3] get property: max_req_size, value:0x00020000
[ 2.570603@3] get property: pinname, str:sdio
[ 2.570608@3] get property: card_type, value:3
[ 2.570640@3] sdio:pdata->caps = 7810f
[ 2.570642@3] sdio:pdata->caps2 = 0
[ 2.570646@3] sdio:pdata->pm_caps = 1
[ 2.608048@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.608414@0] ion_dev has 1 memory regions
[ 2.638410@1] emmc: new HS400 MMC card at address 0001
[ 2.643311@1] emmc: clock 100000000, 8-bit-bus-width
[ 2.643311@1]
[ 2.648736@1] mmcblk0: emmc:0001 8WPD3R 7.28 GiB
[ 2.651047@0] fb: osd_init_module
[ 2.651199@0] fb: viu vsync irq: 35
[ 2.651206@0] meson-fb has 1 memory regions
[ 2.651251@0] meson-fb meson-fb.15: assigned reserved memory node linux,meson-fb ok
[ 2.651269@0] fb: osd_probe vinfo:ffffffc001b3d5f0
[ 2.651276@0] fb: init fbdev bpp is:32
[ 2.680273@1] mmcblk0boot0: emmc:0001 8WPD3R partition 1 4.00 MiB
[ 2.686158@0] fb: set osd0 reverse as NONE
[ 2.690211@1] mmcblk0boot1: emmc:0001 8WPD3R partition 2 4.00 MiB
[ 2.690707@0] fb: osd probe OK
[ 2.690981@0] ge2d: ge2d_init_module
[ 2.690994@0] ge2d: ge2d_dev major:243
[ 2.691412@0] ge2d: ge2d clock is 400 MHZ
[ 2.691417@0] ge2d: ge2d: pdev=ffffffc01035d000, irq=182, rstc=0xffffffc0003e1580, clk=ffffffc010276d00
[ 2.691477@0] ge2d: mapped phy: 0xd0160000
[ 2.691482@0] ge2d: ge2d start monitor
[ 2.691732@0] ge2d: ge2d workqueue monitor start
[ 2.691884@0] codec:Amlogic A/V streaming port init
[ 2.693464@0] codec:get gate demux control ok ffffffc024146c00
[ 2.693470@0] codec:get gate parser_top control ok ffffffc024146880
[ 2.693474@0] codec:get gate vpu_intr control ok ffffffc024146500
[ 2.693480@0] codec:get gate vdec control ok ffffffc024146180
[ 2.694325@0] codec:[tsync_pcr_init]init success.
[ 2.694473@0] codec:amvideocap_probe,amvideocap
[ 2.694477@0] codec:use cma buf.
[ 2.696701@0] codec:vdec_request_irq ffffffc001552d80, vsync
[ 2.696944@0] codec:create_ge2d_work_queue video task ok
[ 2.783936@3] rdma_register, rdma_table_addr ffffff800040e000 rdma_table_addr_phy 27450000 reg_buf ffffffc024220000
[ 2.794175@3] rdma_register success, handle 3 table_size 32768
[ 2.798164@1] mmcblk0rpmb: emmc:0001 8WPD3R partition 3 512 KiB
[ 2.799077@0] mmcblk0: unknown partition table
[ 2.799871@1] [mmc_read_partition_tbl] mmc read partition OK!
[ 2.799873@1] add_emmc_partition
[ 2.800138@0] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
[ 2.800297@0] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
[ 2.800439@0] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
[ 2.800567@0] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
[ 2.800703@0] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
[ 2.800840@0] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
[ 2.801007@0] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
[ 2.801145@0] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
[ 2.801279@0] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
[ 2.801417@0] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
[ 2.801557@0] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
[ 2.801684@0] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
[ 2.801819@0] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000
[ 2.801952@0] [mmcblk0p14] data offset 0x000097c00000, size 0x00013a400000
[ 2.801988@0] card key: card_blk_probe.
[ 2.801993@0] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
[ 2.801997@0] emmc key: emmc_key_init:552 ok.
[ 2.804993@1] amlmmc_dtb_init: register dtb chardev
[ 2.804993@1] calc d523d4a9, store 74726170
[ 2.804997@1] cpy 1 is not valid
[ 2.807729@1] calc 853b1479, store 528000a0
[ 2.807732@1] cpy 0 is not valid
[ 2.807733@1] total valid 0
[ 2.808441@0] amlmmc_dtb_init: register dtb chardev OK
[ 2.808442@0] Exit aml_emmc_partition_ops OK.
[ 2.810617@0] mmcblk0boot1: unknown partition table
[ 2.811610@0] mmcblk0boot0: unknown partition table
[ 2.811915@0] clear_emmc_wait_flag
[ 2.892249@0] sd: new high speed SDHC card at address aaaa
[ 2.892786@0] sd: clock 50000000, 4-bit-bus-width
[ 2.892786@0]
[ 2.892787@0] mmcblk1: sd:aaaa SL32G 29.7 GiB
[ 2.893935@0] mmcblk1: p1 p2
[ 3.015238@3] video_rdma:rdma_init video rdma handle = 3.
[ 3.020588@3] codec:used fix clk for vdec clk source!
[ 3.025573@3] codec:register clk_set_setting cpu[33]
[ 3.031061@3] DI: di_module_init ok.
[ 3.034026@3] DI: di_module_init: major 238
[ 3.038362@3] DI: di_probe
[ 3.041015@0] deinterlace has 1 memory regions
[ 3.045265@0] DI: di reveser memory 0x3b300000, size 30MB.
[ 3.045274@0] deinterlace deinterlace.25: assigned reserved memory node linux,di ok
[ 3.052852@0] DI-di_probe: get flag_cma error.
[ 3.057256@0] di_irq:78,timerc_irq:38
[ 3.061074@0] rdma_register, rdma_table_addr ffffff8000431000 rdma_table_addr_phy 2744a000 reg_buf ffffffc02423a000
[ 3.071219@0] rdma_register success, handle 4 table_size 8192
[ 3.076920@0] DI: di_probe allocate rdma channel 4.
[ 3.081732@0] DI: DI hw version 2.
[ 3.085090@0] 0x000000db:Y=db,U=0,V=0
[ 3.088710@0] 0x000000dc:Y=dc,U=0,V=0
[ 3.092344@0] 0x000000dd:Y=dd,U=0,V=0
[ 3.095950@0] 0x000000de:Y=de,U=0,V=0
[ 3.099580@0] 0x000000df:Y=df,U=0,V=0
[ 3.103195@0] 0x000000e0:Y=e0,U=0,V=0
[ 3.106817@0] 0x000000e1:Y=e1,U=0,V=0
[ 3.110462@0] 0x000000e2:Y=e2,U=0,V=0
[ 3.114062@0] 0x000000e3:Y=e3,U=0,V=0
[ 3.117685@0] 0x000000f0:Y=f0,U=0,V=0
[ 3.121315@0] 0x000000f1:Y=f1,U=0,V=0
[ 3.124946@0] 0x000000f2:Y=f2,U=0,V=0
[ 3.128557@0] 0x000000f3:Y=f3,U=0,V=0
[ 3.132175@0] 0x000000f4:Y=f4,U=0,V=0
[ 3.135797@0] 0x000000f5:Y=f5,U=0,V=0
[ 3.139424@0] 0x000000f6:Y=f6,U=0,V=0
[ 3.143059@0] 0x000000f7:Y=f7,U=0,V=0
[ 3.146665@0] 0x000000f8:Y=f8,U=0,V=0
[ 3.150292@0] 0x000000f9:Y=f9,U=0,V=0
[ 3.153910@0] 0x000000fa:Y=fa,U=0,V=0
[ 3.157548@0] 0x000000fb:Y=fb,U=0,V=0
[ 3.161160@0] 0x000000fc:Y=fc,U=0,V=0
[ 3.165267@0] efusekeynum: 4
[ 3.167632@0] efusekeyname: mac offset: 0 size: 6
[ 3.174082@0] efusekeyname: mac_bt offset: 6 size: 6
[ 3.180406@0] efusekeyname: mac_wifi offset: 12 size: 6
[ 3.186775@0] efusekeyname: usid offset: 18 size: 16
[ 3.193527@0] efuse efuse.9: probe OK!
[ 3.197172@0] key unify config unifykey-num is 14
[ 3.201584@0] key unify fact unifykey-num is 14
[ 3.206008@0] aml_unifykeys_probe:1280=============unifykey_devno:ec00000
[ 3.213055@0] 6unifykey: device unifykeys created ok
[ 3.217859@0] 6aml_unifykeys_init done!
[ 3.221641@0] PPMGRDRV: warn: ppmgr module init func called
[ 3.227305@0] PPMGRDRV: err: ppmgr_driver_probe called
[ 3.232237@0] ppmgr has 1 memory regions
[ 3.236134@0] PPMGRDRV: info: ppmgr_dev major:235
[ 3.241102@0] PPMGRDRV: info: ppmgr_probe done
[ 3.245533@0] amlogic rfkill init
[ 3.248577@0] enter bt_probe of_node
[ 3.251989@0] not get gpio_en
[ 3.254909@0] power on valid level is high
[ 3.258847@0] bt: power_on_pin_OD = 0;
[ 3.637229@0] hdmitx: system: irq 80000004
[ 3.637280@0] hdmitx: plugout
[ 3.638658@0] hdmitx: system: unmux DDC for gpio read edid
[ 3.644096@0] hdmitx: clear RX hdr info
[ 3.678219@0] audio_dsp: [dsp]register dsp to char divece(257)
[ 3.679132@0] amaudio: amaudio: driver amaudio succuess!
[ 3.683740@0] vdin_drv_init: major 234
[ 3.687680@0] rdma_register, rdma_table_addr ffffff8000434000 rdma_table_addr_phy 2744c000 reg_buf ffffffc0242eb200
[ 3.697804@0] rdma_register success, handle 5 table_size 512
[ 3.703359@0] vdin_drv_probe:vdin.0 rdma hanld 5.
[ 3.708349@1]
[ 3.708349@1] vdin memory resource undefined!!
[ 3.714124@1] vdin0 cma_mem_size = 16 MB
[ 3.718005@1] vdin0 irq: 115 rdma irq: 2
[ 3.721975@1] vdin_drv_probe: fclk_div5 is 400 MHZ
[ 3.726646@1] vdin_drv_probe: vdin[0] clock is 50 MHZ
[ 3.731949@0] vdin_drv_probe: driver initialized ok
[ 3.736584@0] rdma_register, rdma_table_addr ffffff8000436000 rdma_table_addr_phy 2744d000 reg_buf ffffffc0242eb400
[ 3.746879@0] rdma_register success, handle 6 table_size 512
[ 3.752426@0] vdin_drv_probe:vdin.1 rdma hanld 6.
[ 3.757383@0] vdin1 has 1 memory regions
[ 3.760994@0] vdin vdin1.27: assigned reserved memory node linux,vdin1_cma ok
[ 3.768033@0]
[ 3.768033@0] vdin memory resource done.
[ 3.773638@0] vdin1 cma_mem_size = 16 MB
[ 3.777542@0] vdin1 irq: 117 rdma irq: 4
[ 3.781455@0] vdin_drv_probe: fclk_div5 is 400 MHZ
[ 3.786146@0] vdin_drv_probe: vdin[1] clock is 50 MHZ
[ 3.791402@0] vdin_drv_probe: driver initialized ok
[ 3.796128@0] vdin_drv_init: vdin driver init done
[ 3.800736@0] tvafe_drv_init: major 233
[ 3.804816@0] tvafe: tvafe_init.
[ 3.808022@0] [RX]-hdmirx: hdmirx_init.
[ 3.811524@0] ESM HLD: Initializing...
[ 3.815206@0] ESM HLD: Registering device range 'esm_rx'...
[ 3.820753@0] ESM HLD: Device range 'esm_rx' has been registered.
[ 3.826804@0] ESM HLD: Creating class /sys/class/elliptic_rx...
[ 3.832761@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
[ 3.839366@0] ESM HLD: Creating device 'esm_rx'...
[ 3.844304@0] ESM HLD: Device 'esm_rx' has been created.
[ 3.849379@0] ESM HLD: Done initializing the HLD driver.
[ 3.854622@0] module init
[ 3.857413@0]
[ 3.857413@0] VECM probe start
[ 3.862313@0] aml_vecm_probe: ok
[ 3.865152@0] hdmitx: system: irq 80000002
[ 3.869944@0] saradc c1108680.saradc: initialized by BL30
[ 3.874615@0] saradc c1108680.saradc: calibration start:
[ 3.879876@0] saradc c1108680.saradc: nominal=0, value=4
[ 3.885112@0] saradc c1108680.saradc: nominal=256, value=251
[ 3.890754@0] saradc c1108680.saradc: nominal=512, value=497
[ 3.896324@0] saradc c1108680.saradc: nominal=768, value=748
[ 3.901940@0] saradc c1108680.saradc: nominal=1023, value=995
[ 3.907599@0] saradc c1108680.saradc: calibration end: coef=4219
[ 3.913777@3] remote: Driver init
[ 3.916888@3] remote: platform_data g_remote_ao_offset=580
[ 3.922257@3] remote: platform_data irq =228
[ 3.926496@3] remote: set drvdata completed
[ 3.930727@3] remote: device_create_file completed
[ 3.935922@3] input: aml_keypad as /devices/meson-remote.11/input/input0
[ 3.942626@0] remote: input_register_device completed
[ 3.947476@0] remote: set_remote_mode[78]
[ 3.951417@0] remote: remote config major:230
[ 3.956014@0] remote: physical address:0x241fa000
[ 3.960898@3] gpio-key gpio_keypad.48: gpio_key: 0 name(power) pin()
[ 3.966750@3] gpio-key gpio_keypad.48: amlogic_gpio_name_map_num pin 0!::
[ 3.973500@3] gpio-key gpio_keypad.48: gpio_key: 0 power(147)
[ 3.979211@3] gpio-key gpio_keypad.48: start setup_timer
[ 3.984431@3] gpio-key gpio_keypad.48: power key(116) registed.
[ 3.990569@2] input: gpio_keypad as /devices/gpio_keypad.48/input/input1
[ 3.997123@0] gpio-key gpio_keypad.48: gpio keypad register input device completed.
[ 4.004567@0] input input1: gpio keypad major:229
[ 4.009652@0] cpuinfo: probe done
[ 4.013255@0] input: cec_input as /devices/virtual/input/input2
[ 4.018617@0] cectx aocec: aml_cec_probe(): no hdmirx reg resource
[ 4.024509@0] cectx aocec: aml_cec_probe(): no hhi reg resource
[ 4.030433@0] cectx aocec: aml_cec_probe(): can't find hdmirx
[ 4.037161@0] cec: wake up flag:0
[ 4.040853@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
[ 4.047716@0] aml-i2s-dai I2S.40: I2S Mic is in platform!
[ 4.051731@0] aml_pcm_dai: pcm mode detection =1
[ 4.078059@3] input input1: key 116 up
[ 4.198044@0] hdmitx: plugin
[ 4.253406@0] EDID Parser:
[ 4.253714@0] hdmitx: get dtd0 vic: 4
[ 4.254116@0] hdmitx: get dtd1 vic: 5
[ 4.257792@0] dump_dtd_info[1762]
[ 4.261029@0] pixel_clock 2700
[ 4.264034@0] h_active 720
[ 4.266707@0] h_blank 138
[ 4.269306@0] v_active 480
[ 4.271968@0] v_blank 45
[ 4.274495@0] h_sync_offset 16
[ 4.277488@0] h_sync 62
[ 4.278277@2] aml_snd_card: headphone detection disable=1
[ 4.285301@0] v_sync_offset 9
[ 4.285662@2] aml_snd_m8_card aml_m8_snd.47: T9015-audio-hifi <-> I2S.40 mapping ok
[ 4.285997@2] aml_snd_m8_card aml_m8_snd.47: dit-hifi <-> SPDIF.41 mapping ok
[ 4.286030@2] aml_pcm: enter aml_pcm_new dai->name: PCM.42 dai->id: 0
[ 4.286115@2] aml_snd_m8_card aml_m8_snd.47: pcm2bt-pcm <-> PCM.42 mapping ok
[ 4.286144@2] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTL
[ 4.286148@2] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
[ 4.286153@2] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTR
[ 4.286157@2] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
[ 4.288413@2] TCP: cubic registered
[ 4.289053@2] NET: Registered protocol family 10
[ 4.289816@2] NET: Registered protocol family 17
[ 4.289849@2] Key type dns_resolver registered
[ 4.291351@2] Registering SWP/SWPB emulation handler
[ 4.292128@2] regulator-dummy: disabling
[ 4.374930@0] v_sync 6
[ 4.377200@0] dump_dtd_info[1762]
[ 4.380478@0] pixel_clock 8550
[ 4.383489@0] h_active 1360
[ 4.386249@0] h_blank 432
[ 4.388843@0] v_active 768
[ 4.391531@0] v_blank 27
[ 4.394012@0] h_sync_offset 64
[ 4.397031@0] h_sync 112
[ 4.399538@0] v_sync_offset 3
[ 4.402464@0] v_sync 6
[ 4.404793@0] hdmitx: edid: find IEEEOUT
[ 4.408700@0] hdmitx: edid: check sum valid
[ 4.412814@0] hdmitx: edid: check sum valid
[ 4.416978@0] hdmitx: update RX hdr info 0
[ 4.421022@0] hdmitx: edid: check sum valid
[ 4.425172@0] hdmitx: edid: check sum valid
[ 4.429298@0] hdmitx: edid: blk0 raw data
[ 4.433291@0] 00ffffffffffff0020a329000100000032130103807341780af330a75442aa26
[ 4.433291@0] 0f50542108008180d1c0010101010101010101010101011d007251d01e206e28
[ 4.433291@0] 5500c48e2100001e011d8018711c1620582c2500c48e2100009e000000fc0048
[ 4.433291@0] 444d490a2020202020202020000000fd0032551f450f000a20202020202001e8
[ 4.433291@0]
[ 4.433291@0]
[ 4.465215@0] hdmitx: edid: blk1 raw data
[ 4.469177@0] 02031f72260907071107504890050403060701028301000066030c002000808c
[ 4.469177@0] 0ad08a20e02d10103e960020c231000018662150b051001b3040703600444021
[ 4.469177@0] 0000180000000000000000000000000000000000000000000000000000000000
[ 4.469177@0] 0000000000000000000000000000000000000000000000000000000000000036
[ 4.469177@0]
[ 4.469177@0]
[ 4.501099@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[ 4.506757@0] hdmitx: video: get current mode: 1080p60hz
[ 4.512031@0] hdmitx: update rx hdr info 0
[ 4.516056@0] hdmitx: update physcial size: 1150 650
[ 4.521020@0] hdmitx: system: already init VIC = 0 Now VIC = 16
[ 4.526944@0] hdmitx: rx no SCDC present indicator
[ 4.533683@0] hdmitx: ddc rd8b error 0x54 0x01
[ 4.538074@0] hdmitx: ddc rd8b error 0x54 0x01
[ 4.540467@0] hdmirx version is 1.4 or below
[ 4.544709@0] hdmitx div40: 0
[ 4.568060@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 4.568504@0] hdmitx: system: set pll
[ 4.572127@0] hdmitx: system: param->VIC:16
[ 4.576291@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
[ 4.584061@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 4.588797@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 4.593558@0] hdmitx: ddc rd8b error 0x54 0x21
[ 4.595943@0] config HPLL = 2970000
[ 4.599408@0] HPLL: 0xc000027b
[ 4.602400@0] config HPLL done
[ 4.605443@0] set_hpll_od3_clk_div[437] div = 6
[ 4.609916@0] j = 4 vid_clk_div = 1
[ 4.613448@0] hdmitx: set enc for VIC: 16
[ 4.617423@0] hdmitx_set_hw[4947] set VIC = 16
[ 4.622014@0] hdmitx: system: irq 80000001
[ 4.634972@0] Start = 0x10000100 End = 0x100001ff
[ 4.635004@0] [0x10000104]: 0x00000001
[ 4.638106@0] [0x10000180]: 0x000000ff
[ 4.641629@0] [0x10000181]: 0x000000ff
[ 4.645337@0] [0x10000182]: 0x00000003
[ 4.649053@0] [0x10000183]: 0x00000007
[ 4.652780@0] [0x10000184]: 0x0000003f
[ 4.656464@0] [0x10000185]: 0x00000002
[ 4.660184@0] [0x10000187]: 0x000000ff
[ 4.663881@0] [0x10000188]: 0x00000003
[ 4.750044@0] hdmitx: system: PHY Setting Done
[ 4.754077@0] Sink is HDMI device
[ 4.754105@0] hdmitx: system: packet: can't get vendor data
[ 4.757652@0] 1080p60hz 60 1
[ 4.760506@0] 1080p60hz 60 1
[ 4.763344@0] hdmtix: set audio
[ 4.766455@0] hdmitx tx_aud_src = 0
[ 4.769946@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[ 4.775074@0] hdmitx aud_n_para = 6144
[ 4.778803@0] hdmitx set channel status
[ 4.782633@0] hdmtix: set audio
[ 4.785706@0] hdmitx tx_aud_src = 0
[ 4.789161@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[ 4.794307@0] hdmitx aud_n_para = 6144
[ 4.798035@0] hdmitx set channel status
[ 4.994121@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.995461@2] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
[ 5.006766@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.014912@0] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
[ 5.020643@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.027374@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.034741@0] usb usb1: Product: xHCI Host Controller
[ 5.039723@0] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
[ 5.045314@0] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 5.050955@2] hub 1-0:1.0: USB hub found
[ 5.054222@2] hub 1-0:1.0: 2 ports detected
[ 5.058508@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.063950@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.071816@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.078615@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.085937@2] usb usb2: Product: xHCI Host Controller
[ 5.090947@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
[ 5.096546@2] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 5.102072@0] hub 2-0:1.0: USB hub found
[ 5.105455@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.113168@1] console [netcon0] enabled
[ 5.116468@1] netconsole: network logging started
[ 5.121198@1] aml_vrtc rtc.32: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[ 5.130360@1] cpufreq-scpi cpufreq-meson.7: enter cpufreq
[ 5.134865@1] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
[ 5.142902@0] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
[ 5.146599@0] gxbb_pm: enter meson_pm_probe!
[ 5.150590@0] gxbb_pm: meson_pm_probe done
[ 5.155323@0] cpucore_cooling_register, max_cpu_core_num:4
[ 5.175238@0] aml_istbt_dev_ready NULL
[ 5.175294@0] ALSA device list:
[ 5.176472@0] #0: AML-M8AUDIO
[ 5.179994@0] Freeing unused kernel memory: 912K (ffffffc0019f0000 - ffffffc001ad4000)
[ 5.215401@1] fb: Frame buffer memory assigned at
[ 5.215414@1] fb: 0, phy: 0x000000003d100000, vir:0xffffff8001b00000, size=24576K
[ 5.215414@1]
[ 5.215422@1] fb: ---------------clear fb0 memory ffffff8001b00000
[ 5.224128@1] fb: osd[0] canvas.idx =0x40
[ 5.224134@1] fb: osd[0] canvas.addr=0x3d100000
[ 5.224137@1] fb: osd[0] canvas.width=7680
[ 5.224140@1] fb: osd[0] canvas.height=3240
[ 5.224144@1] fb: osd[0] frame.width=1920
[ 5.224147@1] fb: osd[0] frame.height=1080
[ 5.234498@0] fb: osd[0] canvas.idx =0x40
[ 5.234500@0] fb: osd[0] canvas.addr=0x3d100000
[ 5.234501@0] fb: osd[0] canvas.width=7680
[ 5.234502@0] fb: osd[0] canvas.height=2160
[ 5.234503@0] fb: osd[0] frame.width=1920
[ 5.234505@0] fb: osd[0] frame.height=1080
[ 5.252691@1] fb: Frame buffer memory assigned at
[ 5.252706@1] fb: 1, phy: 0x000000003e900000, vir:0xffffff8003380000, size=1024K
[ 5.252706@1]
[ 5.252713@1] fb: fb1 open, logo index:1
[ 5.284709@3] codec:free_alloced_keep_buffer (null). (null). (null)
[ 5.284979@3] vfm_map_store:rm default
[ 5.284979@3]
[ 5.285100@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 5.285100@3]
[ 5.285264@3] fb: osd[0] enable: 1 (platform_init)
[ 5.301363@3] fb: osd[1] enable: 0 (platform_init)
[ 5.367851@3] Console: switching to colour frame buffer device 240x67
[ 5.378134@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 5.422699@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[ 5.422720@3] dwc_otg_driver_probe host only, not probe usb_otg!!!
[ 5.548951@0] usb 1-1: New USB device found, idVendor=1058, idProduct=0820
[ 5.548962@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 5.548968@0] usb 1-1: Product: My Passport 0820
[ 5.548972@0] usb 1-1: Manufacturer: Western Digital
[ 5.548978@0] usb 1-1: SerialNumber: 57585531454233555A575337
[ 5.550387@2] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 5.550823@2] scsi0 : usb-storage 1-1:1.0
[ 5.668104@2] usb 1-2: new full-speed USB device number 3 using xhci-hcd
[ 5.810065@3] usb 1-2: New USB device found, idVendor=046d, idProduct=c534
[ 5.810076@3] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.810081@3] usb 1-2: Product: USB Receiver
[ 5.810086@3] usb 1-2: Manufacturer: Logitech
[ 5.818753@3] input: Logitech USB Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input3
[ 5.819059@2] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-2/input0
[ 5.824274@3] input: Logitech USB Receiver as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input4
[ 5.824840@3] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-2/input1
[ 6.548498@2] scsi 0:0:0:0: Direct-Access WD My Passport 0820 1007 PQ: 0 ANSI: 6
[ 6.549827@2] scsi 0:0:0:1: Enclosure WD SES Device 1007 PQ: 0 ANSI: 6
[ 6.550105@3] sd 0:0:0:0: [sda] Spinning up disk...
[ 6.551768@2] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[ 6.552251@2] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[ 6.617168@2] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.558069@3] .ready
[ 7.558382@3] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 7.558627@3] sd 0:0:0:0: [sda] Write Protect is off
[ 7.558634@3] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[ 7.558877@3] sd 0:0:0:0: [sda] No Caching mode page found
[ 7.558882@3] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 7.559968@3] sd 0:0:0:0: [sda] No Caching mode page found
[ 7.559978@3] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 7.610789@3] sda: sda1
[ 7.612132@3] sd 0:0:0:0: [sda] No Caching mode page found
[ 7.612143@3] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 7.612152@3] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.334391@0] random: nonblocking pool is initialized
[ 12.562740@2] systemd[1]: System time before build time, advancing clock.
[ 12.573065@2] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 12.573385@2] systemd[1]: Detected architecture arm64.
[ 12.573566@2] systemd[1]: Set hostname to .
[ 12.635955@2] systemd[1]: Listening on udev Kernel Socket.
[ 12.636388@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.636567@2] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.636720@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 12.636772@2] systemd[1]: Reached target Paths.
[ 12.636895@2] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 12.637725@2] systemd[1]: Created slice System Slice.
[ 12.639581@2] systemd[1]: Starting Show Version...
[ 12.641241@2] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.643093@2] systemd[1]: Mounting Debug File System...
[ 12.645017@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 12.645060@2] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[ 12.646685@2] systemd[1]: Mounting Variable Directory...
[ 12.647187@2] systemd[1]: Created slice User and Session Slice.
[ 12.647347@2] systemd[1]: Reached target Slices.
[ 12.647904@2] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 12.648074@2] systemd[1]: Reached target RPC Port Mapper.
[ 12.648869@2] systemd[1]: Listening on Journal Socket.
[ 12.651341@2] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 12.652998@2] systemd[1]: Starting Setup machine-id...
[ 12.655176@2] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.659382@2] systemd[1]: Starting Load Kernel Modules...
[ 12.660014@2] systemd[1]: Reached target Swap.
[ 12.661895@2] systemd[1]: Mounting Temporary Directory...
[ 12.663839@2] systemd[1]: Starting Samba Configuration...
[ 12.664204@2] systemd[1]: Listening on udev Control Socket.
[ 12.673876@2] systemd[1]: Mounted Debug File System.
[ 12.674083@2] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.674233@2] systemd[1]: Mounted Variable Directory.
[ 12.676605@2] systemd[1]: Mounted Temporary Directory.
[ 12.677424@2] systemd[1]: Started Show Version.
[ 12.680766@3] systemd[1]: Started Debug Shell on /dev/ttyS0.
[ 12.682279@3] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 12.683186@3] systemd[1]: Started Remount Root and Kernel File Systems.
[ 12.685144@3] systemd[1]: Started Setup machine-id.
[ 12.687970@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 12.688334@3] systemd[1]: Starting Journal Service...
[ 12.692311@3] systemd[1]: Starting udev Coldplug all Devices...
[ 12.694143@3] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 12.696461@1] media: Linux media interface: v0.10
[ 12.697399@3] systemd[1]: Started Samba Configuration.
[ 12.706554@1] Linux video capture interface: v2.00
[ 12.706566@1] WARNING: You are using an experimental version of the media stack.
[ 12.706566@1] As the driver is backported to an older kernel, it doesn't offer
[ 12.706566@1] enough quality for its usage in production.
[ 12.706566@1] Use it with care.
[ 12.706566@1] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 12.706566@1] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[ 12.713438@3] systemd[1]: Started Create Static Device Nodes in /dev.
[ 12.713871@3] systemd[1]: Reached target Local File Systems (Pre).
[ 12.714022@3] systemd[1]: Reached target Local File Systems.
[ 12.718297@1] amlvid:err: amlvideo_init called
[ 12.718306@1] amlvid:err: amlvideo_create_instance called
[ 12.718314@1] amlvid:err: v4l2_dev.name=:amlvideo-000
[ 12.718607@1] amlvideo-000: V4L2 device registered as video10
[ 12.730520@1] mali-utgard d00c0000.mali: set min pp to default 1
[ 12.730534@1] mali-utgard d00c0000.mali: set min clk default to 0
[ 12.730633@1] mali-utgard d00c0000.mali: max clk set 5
[ 12.730639@1] mali-utgard d00c0000.mali: turbo clk set to 6
[ 12.735916@0] gpu cooling register okay with err=0
[ 12.737032@0] gpu core cooling register okay with err=0
[ 12.738234@0] Mali: Mali device driver loaded
[ 12.739618@3] systemd[1]: Started Load Kernel Modules.
[ 12.741367@3] systemd[1]: Starting Apply Kernel Variables...
[ 12.743040@3] systemd[1]: Mounting Configuration File System...
[ 12.747997@3] systemd[1]: Mounted Configuration File System.
[ 12.760465@3] systemd[1]: Started Apply Kernel Variables.
[ 12.815774@3] systemd[1]: Started Journal Service.
[ 12.832841@2] systemd-journald[1919]: Received request to flush runtime journal from PID 1
[ 13.579139@3] Console: switching to colour dummy device 80x25
[ 13.621954@2] remote: cur_mode = 0
[ 13.621970@2] remote: set_remote_mode[78]
[ 13.716156@3] Triggered SDIO WiFi power on and bus rescan.
[ 13.716188@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240
[ 14.018105@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240
[ 14.159171@2] libphy: set driving length c
[ 14.159266@2] libphy: set PLL minimum jitter
[ 14.200058@2] fuse init (API version 7.22)
[ 14.239212@2] libphy: set driving length c
[ 14.239308@2] libphy: set PLL minimum jitter
[ 14.276461@2] 8021q: 802.1Q VLAN Support v1.8
[ 14.338176@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
[ 14.338189@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 14.338211@2] aml_sd_emmc_data_thread 2639 sdio: cmd:8
[ 14.363464@2] sdio: new high speed SDIO card at address 0001
[ 14.363477@2] sdio: clock 50000000, 4-bit-bus-width
[ 14.363477@2]
[ 14.368402@2] [sdio_reinit] finish
[ 14.418003@3] cfg80211: Calling CRDA to update world regulatory domain
[ 14.476623@3] RTL871X: module init start
[ 14.476641@3] RTL871X: rtl8189es v4.3.18.4_22798.20170620
[ 14.476645@3] ######platform_wifi_power_on:
[ 14.476670@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240
[ 14.978138@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240
[ 15.488080@3] sdio_reset_comm():
[ 15.507717@3] [sdio_reinit] finish
[ 15.513916@3] bFWReady == _FALSE call reset 8051...
[ 15.539466@3] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=88:83:5d:06:53:81
[ 15.549744@3] RTL871X: module init ret=0
[ 15.928314@2] ==> rtl8188e_iol_efuse_patch
[ 16.133826@2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.390861@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 16.390914@2] aml_spdif_dai: share the same clock
[ 16.390924@2] aml_audio_hw: IEC958 PCM32
[ 16.390930@2] hdmitx: audio: aout notify rate 44100
[ 16.390934@2] hdmitx: audio: aout notify size 32
[ 16.390938@2] hdmitx: audio: aout notify format CT_PCM
[ 16.390942@2] hdmtix: set audio
[ 16.390955@2] hdmitx tx_aud_src = 0
[ 16.390980@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 16.390984@2] hdmitx aud_n_para = 6272
[ 16.391003@2] hdmitx set channel status
[ 16.391060@2] hdmitx: audio: Audio Type: PCM
[ 16.391064@2] hdmitx: audio: set audio param
[ 16.391073@2] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 16.391382@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 16.391387@3] aml_spdif_dai: share the same clock
[ 16.391396@3] aml_audio_hw: IEC958 PCM32
[ 16.391401@3] hdmitx: audio: aout notify rate 44100
[ 16.391405@3] hdmitx: audio: aout notify size 32
[ 16.391408@3] hdmitx: audio: no update
[ 16.391415@3] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 16.391582@3] channel count should be 8, we got 2 aborting
[ 16.393604@3] aml_snd_m8_card aml_m8_snd.47: I2S playback enable
[ 16.393618@3] aml_snd_m8_card aml_m8_snd.47: IEC958 playback enable
[ 16.442727@0] codec:vdec_create instance ffffff8003910000, total 1
[ 16.504774@2] vout_serve: vmode set to null
[ 16.504806@2] fb: current vmode=1080p60hz, cmd: 0x50000
[ 16.504814@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[ 16.504819@2] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[ 16.504831@2] tv_vout: 3Invalid video output modes.
[ 16.504835@2] tv_vout: new mode =null set ok
[ 16.504838@2] vout_serve: vinfo mode is: null
[ 16.504842@2] vout_serve: new mode null set ok
[ 16.504852@2] hdmitx: edid: not find mapped vic
[ 16.504859@2] hdmitx: video: get current mode: null
[ 16.504864@2] hdmitx: update rx hdr info 0
[ 16.504867@2] hdmitx: update physcial size: 1150 650
[ 16.504871@2] hdmitx: video: null not valid hdmi mode
[ 16.504892@2] fb: current vmode=null, cmd: 0x10000
[ 16.517919@0] hdmitx: set frac_rate_policy as 0
[ 16.517948@0] vout_serve: vmode set to 1080p60hz
[ 16.517967@0] vout_serve: disable HDMI PHY as soon as possible
[ 16.517973@0] fb: current vmode=null, cmd: 0x50000
[ 16.517979@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 16.517984@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[ 16.517995@0] tv_vout: TV mode 1080p60hz selected.
[ 16.518001@0]
[ 16.518001@0] vdac_enable: on:0,module_sel:8
[ 16.518011@0]
[ 16.518011@0] vdac_enable: on:0,module_sel:8
[ 16.518019@0] tv_vout: new mode =1080p60hz set ok
[ 16.518023@0] vout_serve: vinfo mode is: 1080p60hz
[ 16.518046@0] vout_serve: new mode 1080p60hz set ok
[ 16.518065@0] hdmitx: video: get current mode: 1080p60hz
[ 16.518069@0] hdmitx: update rx hdr info 0
[ 16.518072@0] hdmitx: update physcial size: 1150 650
[ 16.518123@0] hdmitx: system: already init VIC = 0 Now VIC = 16
[ 16.518129@0] hdmitx: rx no SCDC present indicator
[ 16.520140@0] hdmitx: ddc rd8b error 0x54 0x01
[ 16.522151@0] hdmitx: ddc rd8b error 0x54 0x01
[ 16.522156@0] hdmirx version is 1.4 or below
[ 16.522160@0] hdmitx div40: 0
[ 16.548044@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 16.548054@0] hdmitx: system: set pll
[ 16.548057@0] hdmitx: system: param->VIC:16
[ 16.548062@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
[ 16.548074@0] config HPLL = 2970000
[ 16.548095@0] HPLL: 0xc000027b
[ 16.548097@0] config HPLL done
[ 16.548106@0] set_hpll_od3_clk_div[437] div = 6
[ 16.548114@0] j = 4 vid_clk_div = 1
[ 16.548123@0] hdmitx: set enc for VIC: 16
[ 16.548140@0] hdmitx_set_hw[4947] set VIC = 16
[ 16.548348@0] hdmitx: system: irq 80000001
[ 16.560049@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 16.562064@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 16.564074@0] hdmitx: ddc rd8b error 0x54 0x21
[ 16.564117@0] Start = 0x10000100 End = 0x100001ff
[ 16.564132@0] [0x10000104]: 0x00000001
[ 16.564302@0] [0x10000180]: 0x000000ff
[ 16.564306@0] [0x10000181]: 0x000000ff
[ 16.564311@0] [0x10000182]: 0x00000003
[ 16.564318@0] [0x10000183]: 0x00000007
[ 16.564323@0] [0x10000184]: 0x0000003f
[ 16.564327@0] [0x10000185]: 0x00000002
[ 16.564333@0] [0x10000187]: 0x000000ff
[ 16.564338@0] [0x10000188]: 0x00000003
[ 16.680066@2] hdmitx: system: PHY Setting Done
[ 16.684090@2] Sink is HDMI device
[ 16.684103@2] hdmitx: system: packet: can't get vendor data
[ 16.684108@2] 1080p60hz 60 1
[ 16.684115@2] 1080p60hz 60 1
[ 16.684119@2] hdmtix: set audio
[ 16.684129@2] hdmitx tx_aud_src = 0
[ 16.684155@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 16.684159@2] hdmitx aud_n_para = 6272
[ 16.684177@2] hdmitx set channel status
[ 16.684234@2] hdmitx: audio: Audio Type: PCM
[ 16.684240@2] fb: current vmode=1080p60hz, cmd: 0x10000
[ 16.732283@0] fb: osd[0] enable: 1 (kodi.bin)
[ 16.863996@2] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
[ 17.060057@3] RTL871X: start auth
[ 17.063736@3] RTL871X: auth success, start assoc
[ 17.068110@3] RTL871X: assoc success
[ 17.068238@3] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.069841@3] RTL871X: recv eapol packet
[ 17.071280@3] RTL871X: send eapol packet
[ 17.078624@3] RTL871X: recv eapol packet
[ 17.078921@3] RTL871X: send eapol packet
[ 17.079072@2] RTL871X: set pairwise key camid:4, addr:64:66:b3:f8:71:10, kid:0, type:AES
[ 17.080254@2] RTL871X: set group key camid:5, addr:64:66:b3:f8:71:10, kid:1, type:AES
[ 31.930703@1] vfm_map_store:rm default
[ 31.930740@1] vfm_map_store:add default decoder ppmgr deinterlace amlvideo amvideo
[ 31.930804@1] codec:free_alloced_keep_buffer (null). (null). (null)
[ 31.931344@1] codec:vdec_create instance ffffff8003941000, total 1
[ 31.932310@1] codec:Video stbuf alloced at 0000000033f00000, size = 10485760
[ 31.932335@1] codec:vdec_init, dev_name:amvdec_h264, vdec_type=VDEC_TYPE_SINGLE
[ 31.932340@1] codec:vdec_init set vfm decoder ffffff8003941000
[ 31.932345@1] codec:vdec_dev_reg.mem[0x0 -- 0x0]
[ 31.932352@1] codec:vdec base memory alloced [0000000034900000 -- 00000000378fffff]
[ 31.934142@1] codec:H264 sysinfo: 1280x720 duration=4004, pts_outside=1,
[ 31.934740@1] codec:vdec_request_irq ffffffc001528428, vh264-irq
[ 31.934772@1] DI: di_receiver_event_fun: vframe provider reg
[ 31.944825@1] set run_early_proc_fun_flag to 1
[ 31.945008@1] codec:vdec_init, vf_provider_name =
[ 31.945468@1] codec:video first pts = 0
[ 31.945482@1] codec:vdec_request_irq ffffffc001519380, parser
[ 31.950359@1] [tsync_avevent]event:1, param 1
[ 31.950375@1] video pause!
[ 31.951058@1] codec:video first checkin pts = 0
[ 31.951070@1] codec:first check in vpts <0x2c:0x0> ok!
[ 31.953483@0] codec:Enter set parameter cmd1.
[ 31.953549@0] codec:vdec1 video changed to 3840 x 2160 60 fps clk->667MHZ
[ 31.953561@0] codec:actual_dpb_size 24 max_dpb_size 7
[ 31.953675@0] codec:video first pts = 1
[ 31.988220@0] pre_de_buf_config: source change: 0x0/0/0/0=>0x9000/1280/720/0
[ 31.988229@0] DI:7920 disable post.
[ 32.031150@0]
[ 32.031150@0] [amvideo..] saturation_pre:0 hue_pre:0 mab:1000000
[ 32.031170@0] vpts to scr, apts = 0x0, vpts = 0x0
[ 32.368147@0] aml_snd_m8_card aml_m8_snd.47: I2S playback disable
[ 32.368251@0] aml_snd_m8_card aml_m8_snd.47: IEC958 playback disable
[ 32.368661@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 32.368719@0] aml_spdif_dai: share the same clock
[ 32.368793@0] aml_audio_hw: IEC958 PCM32
[ 32.368853@0] hdmitx: audio: aout notify rate 44100
[ 32.368898@0] hdmitx: audio: aout notify size 32
[ 32.368940@0] hdmitx: audio: no update
[ 32.369008@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 32.441002@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=48000, runtime->channels=2, same source mode(1)
[ 32.441084@0] aml_spdif_dai: share the same clock
[ 32.441159@0] aml_audio_hw: IEC958 PCM32
[ 32.441220@0] hdmitx: audio: aout notify rate 48000
[ 32.441266@0] hdmitx: audio: aout notify size 32
[ 32.441313@0] hdmtix: set audio
[ 32.441418@0] hdmitx tx_aud_src = 0
[ 32.441628@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
[ 32.441676@0] hdmitx aud_n_para = 6144
[ 32.441827@0] hdmitx set channel status
[ 32.442216@0] hdmitx: audio: Audio Type: PCM
[ 32.442260@0] hdmitx: audio: set audio param
[ 32.442347@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 32.443384@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=48000, runtime->channels=2, same source mode(1)
[ 32.443441@0] aml_spdif_dai: share the same clock
[ 32.443509@0] aml_audio_hw: IEC958 PCM32
[ 32.443564@0] hdmitx: audio: aout notify rate 48000
[ 32.443608@0] hdmitx: audio: aout notify size 32
[ 32.443647@0] hdmitx: audio: no update
[ 32.443715@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 32.444791@0] channel count should be 8, we got 2 aborting
[ 32.457689@3] aml_snd_m8_card aml_m8_snd.47: I2S playback enable
[ 32.457800@3] aml_snd_m8_card aml_m8_snd.47: IEC958 playback enable
[ 32.472226@3] vout_serve: vmode set to null
[ 32.472257@3] vout_serve: disable HDMI PHY as soon as possible
[ 32.472265@3] fb: current vmode=1080p60hz, cmd: 0x50000
[ 32.472272@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[ 32.472277@3] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[ 32.472288@3] tv_vout: 3Invalid video output modes.
[ 32.472292@3] tv_vout: new mode =null set ok
[ 32.472295@3] vout_serve: vinfo mode is: null
[ 32.472299@3] vout_serve: new mode null set ok
[ 32.472309@3] hdmitx: edid: not find mapped vic
[ 32.472316@3] hdmitx: video: get current mode: null
[ 32.472319@3] hdmitx: update rx hdr info 0
[ 32.472323@3] hdmitx: update physcial size: 1150 650
[ 32.472327@3] hdmitx: video: null not valid hdmi mode
[ 32.472348@3] fb: current vmode=null, cmd: 0x10000
[ 32.481271@0] hdmitx: set frac_rate_policy as 1
[ 32.481300@0] vout_serve: vmode set to 1080p60hz
[ 32.481315@0] vout_serve: disable HDMI PHY as soon as possible
[ 32.481321@0] fb: current vmode=null, cmd: 0x50000
[ 32.481327@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 32.481332@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[ 32.481345@0] tv_vout: TV mode 1080p60hz selected.
[ 32.481350@0]
[ 32.481350@0] vdac_enable: on:0,module_sel:8
[ 32.481361@0]
[ 32.481361@0] vdac_enable: on:0,module_sel:8
[ 32.481369@0] tv_vout: new mode =1080p60hz set ok
[ 32.481373@0] vout_serve: vinfo mode is: 1080p60hz
[ 32.481377@0] vout_serve: new mode 1080p60hz set ok
[ 32.481394@0] hdmitx: video: get current mode: 1080p60hz
[ 32.481397@0] hdmitx: update rx hdr info 0
[ 32.481401@0] hdmitx: update physcial size: 1150 650
[ 32.481441@0] hdmitx: system: already init VIC = 0 Now VIC = 16
[ 32.481446@0] hdmitx: rx no SCDC present indicator
[ 32.483456@0] hdmitx: ddc rd8b error 0x54 0x01
[ 32.485467@0] hdmitx: ddc rd8b error 0x54 0x01
[ 32.485472@0] hdmirx version is 1.4 or below
[ 32.485476@0] hdmitx div40: 0
[ 32.508085@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 32.508094@0] hdmitx: system: set pll
[ 32.508104@0] hdmitx: system: param->VIC:16
[ 32.508109@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 1
[ 32.508121@0] config HPLL = 2970000
[ 32.508141@0] HPLL: 0xc000027b
[ 32.508144@0] config HPLL done
[ 32.508152@0] set_hpll_od3_clk_div[437] div = 6
[ 32.508160@0] j = 4 vid_clk_div = 1
[ 32.508170@0] hdmitx: set enc for VIC: 16
[ 32.508186@0] hdmitx_set_hw[4947] set VIC = 16
[ 32.508414@0] hdmitx: system: irq 80000001
[ 32.520085@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 32.522100@0] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 32.524110@0] hdmitx: ddc rd8b error 0x54 0x21
[ 32.524142@0] Start = 0x10000100 End = 0x100001ff
[ 32.524155@0] [0x10000104]: 0x00000001
[ 32.524321@0] [0x10000180]: 0x000000ff
[ 32.524325@0] [0x10000181]: 0x000000ff
[ 32.524330@0] [0x10000182]: 0x00000003
[ 32.524335@0] [0x10000183]: 0x00000007
[ 32.524339@0] [0x10000184]: 0x0000003f
[ 32.524344@0] [0x10000185]: 0x00000002
[ 32.524350@0] [0x10000187]: 0x000000ff
[ 32.524354@0] [0x10000188]: 0x00000003
[ 32.640122@0] hdmitx: system: PHY Setting Done
[ 32.644170@0] Sink is HDMI device
[ 32.644199@0] hdmitx: system: packet: can't get vendor data
[ 32.644211@0] 1080p60hz 60 1
[ 32.644225@0] 1080p60hz 2997 50
[ 32.644235@0] hdmtix: set audio
[ 32.644256@0] hdmitx tx_aud_src = 0
[ 32.644307@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
[ 32.644317@0] hdmitx aud_n_para = 5824
[ 32.644353@0] hdmitx set channel status
[ 32.644453@0] hdmitx: audio: Audio Type: PCM
[ 32.644470@0] fb: current vmode=1080p60hz, cmd: 0x10000
[ 32.708518@0] fb: osd[0] enable: 1 (kodi.bin)
[ 34.650941@0] codec:finished correct frame dur
[ 34.650942@0] codec: new=4001,old_duration=4004,cnt=25
[ 1810.239424@3] RTL871X: ERROR rtw_check_bcn_info: start new beacon (seq=3640)
[ 1810.239445@3] RTL871X: ERROR rtw_check_bcn_info: cur beacon key
[ 1810.239455@3] RTL871X: ERROR rtw_check_bcn_info: new beacon key
[ 1810.341922@3] RTL871X: ERROR rtw_check_bcn_info: new beacon again (seq=3641)
[ 1810.443988@3] RTL871X: ERROR rtw_check_bcn_info: new beacon again (seq=3643)
[ 1810.444009@3] RTL871X: ERROR rtw_check_bcn_info: new beacon occur!!
[ 1812.182665@3] RTL871X: ERROR rtw_check_bcn_info: start new beacon (seq=3661)
[ 1812.182686@3] RTL871X: ERROR rtw_check_bcn_info: cur beacon key
[ 1812.182696@3] RTL871X: ERROR rtw_check_bcn_info: new beacon key
[ 1812.284926@3] RTL871X: ERROR rtw_check_bcn_info: new beacon again (seq=3662)
[ 1812.397116@3] RTL871X: ERROR rtw_check_bcn_info: new beacon again (seq=3663)
[ 1812.397152@3] RTL871X: ERROR rtw_check_bcn_info: new beacon occur!!
[ 6063.313559@0] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
[ 6063.313577@0] di_receiver_event_fun: vf_notify_receiver unreg
[ 6063.313630@0] DI: di_unreg_process unreg start 1.
[ 6063.313653@0] codec:disbled keep video before free keep buffer.
[ 6063.313663@0] codec:disbled video for next before free keep buffer!
[ 6063.313677@0] codec:free_alloced_keep_buffer (null). (null). (null)
[ 6063.313688@0] codec:free_alloced_keep_buffer (null). (null). (null)
[ 6063.313700@0] [tsync_avevent]event:2, param 0
[ 6063.313712@0] codec:video first pts = 0
[ 6063.313736@0] DI: di_unreg_process vf unreg cost 0 ms.
[ 6063.313747@0] DI: di_unreg_process unreg stop 0.
[ 6063.325210@1] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
[ 6063.327148@1] codec:free_alloced_keep_buffer (null). (null). (null)
[ 6063.327243@1] vfm_map_store:rm default
[ 6063.327354@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 6063.591201@0] aml_snd_m8_card aml_m8_snd.47: I2S playback disable
[ 6063.591215@0] aml_snd_m8_card aml_m8_snd.47: IEC958 playback disable
[ 6063.592324@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=48000, runtime->channels=2, same source mode(1)
[ 6063.592337@0] aml_spdif_dai: share the same clock
[ 6063.592345@0] aml_audio_hw: IEC958 PCM32
[ 6063.592352@0] hdmitx: audio: aout notify rate 48000
[ 6063.592356@0] hdmitx: audio: aout notify size 32
[ 6063.592359@0] hdmitx: audio: no update
[ 6063.592369@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 6063.598153@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 6063.598164@0] aml_spdif_dai: share the same clock
[ 6063.598173@0] aml_audio_hw: IEC958 PCM32
[ 6063.598179@0] hdmitx: audio: aout notify rate 44100
[ 6063.598183@0] hdmitx: audio: aout notify size 32
[ 6063.598187@0] hdmtix: set audio
[ 6063.598200@0] hdmitx tx_aud_src = 0
[ 6063.598226@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
[ 6063.598230@0] hdmitx aud_n_para = 8918
[ 6063.598255@0] hdmitx set channel status
[ 6063.598313@0] hdmitx: audio: Audio Type: PCM
[ 6063.598317@0] hdmitx: audio: set audio param
[ 6063.598326@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 6063.598474@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 6063.598479@0] aml_spdif_dai: share the same clock
[ 6063.598487@0] aml_audio_hw: IEC958 PCM32
[ 6063.598493@0] hdmitx: audio: aout notify rate 44100
[ 6063.598496@0] hdmitx: audio: aout notify size 32
[ 6063.598500@0] hdmitx: audio: no update
[ 6063.598506@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[ 6063.598616@0] channel count should be 8, we got 2 aborting
[ 6063.600834@0] vout_serve: vmode set to null
[ 6063.600866@0] vout_serve: disable HDMI PHY as soon as possible
[ 6063.600872@0] fb: current vmode=1080p60hz, cmd: 0x50000
[ 6063.600879@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[ 6063.600884@0] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[ 6063.600896@0] tv_vout: 3Invalid video output modes.
[ 6063.600900@0] tv_vout: new mode =null set ok
[ 6063.600903@0] vout_serve: vinfo mode is: null
[ 6063.600907@0] vout_serve: new mode null set ok
[ 6063.600917@0] hdmitx: edid: not find mapped vic
[ 6063.600924@0] hdmitx: video: get current mode: null
[ 6063.600927@0] hdmitx: update rx hdr info 0
[ 6063.600930@0] hdmitx: update physcial size: 1150 650
[ 6063.600934@0] hdmitx: video: null not valid hdmi mode
[ 6063.600957@0] fb: current vmode=null, cmd: 0x10000
[ 6063.601128@0] aml_snd_m8_card aml_m8_snd.47: I2S playback enable
[ 6063.601133@0] aml_snd_m8_card aml_m8_snd.47: IEC958 playback enable
[ 6063.604434@0] hdmitx: set frac_rate_policy as 0
[ 6063.604462@0] vout_serve: vmode set to 1080p60hz
[ 6063.604484@0] vout_serve: disable HDMI PHY as soon as possible
[ 6063.604490@0] fb: current vmode=null, cmd: 0x50000
[ 6063.604499@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 6063.604504@0] tv_vout: mode is 16,sync_duration_den=50,sync_duration_num=2997
[ 6063.604515@0] tv_vout: TV mode 1080p60hz selected.
[ 6063.604521@0]
[ 6063.604521@0] vdac_enable: on:0,module_sel:8
[ 6063.604531@0]
[ 6063.604531@0] vdac_enable: on:0,module_sel:8
[ 6063.604541@0] tv_vout: new mode =1080p60hz set ok
[ 6063.604544@0] vout_serve: vinfo mode is: 1080p60hz
[ 6063.604548@0] vout_serve: new mode 1080p60hz set ok
[ 6063.604567@0] hdmitx: video: get current mode: 1080p60hz
[ 6063.604571@0] hdmitx: update rx hdr info 0
[ 6063.604574@0] hdmitx: update physcial size: 1150 650
[ 6063.604617@0] hdmitx: system: already init VIC = 0 Now VIC = 16
[ 6063.604622@0] hdmitx: rx no SCDC present indicator
[ 6063.606636@0] hdmitx: ddc rd8b error 0x54 0x01
[ 6063.608652@0] hdmitx: ddc rd8b error 0x54 0x01
[ 6063.608660@0] hdmirx version is 1.4 or below
[ 6063.608665@0] hdmitx div40: 0
[ 6063.633274@1] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 6063.633284@1] hdmitx: system: set pll
[ 6063.633287@1] hdmitx: system: param->VIC:16
[ 6063.633292@1] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
[ 6063.633303@1] config HPLL = 2970000
[ 6063.633324@1] HPLL: 0xc000027b
[ 6063.633327@1] config HPLL done
[ 6063.633335@1] set_hpll_od3_clk_div[437] div = 6
[ 6063.633344@1] j = 4 vid_clk_div = 1
[ 6063.633353@1] hdmitx: set enc for VIC: 16
[ 6063.633369@1] hdmitx_set_hw[4947] set VIC = 16
[ 6063.643318@0] hdmitx: system: irq 80000001
[ 6063.643343@0] Start = 0x10000100 End = 0x100001ff
[ 6063.643354@0] [0x10000104]: 0x00000001
[ 6063.643360@0] [0x10000105]: 0x00000003
[ 6063.643519@0] [0x10000170]: 0x00000004
[ 6063.643546@0] [0x10000180]: 0x000000ff
[ 6063.643551@0] [0x10000181]: 0x000000ff
[ 6063.643555@0] [0x10000182]: 0x00000003
[ 6063.643560@0] [0x10000183]: 0x00000007
[ 6063.643565@0] [0x10000184]: 0x0000003f
[ 6063.643569@0] [0x10000185]: 0x00000002
[ 6063.643576@0] [0x10000187]: 0x000000ff
[ 6063.643580@0] [0x10000188]: 0x00000003
[ 6063.645214@1] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 6063.645334@0] hdmitx: system: irq 80000001
[ 6063.645363@0] Start = 0x10000100 End = 0x100001ff
[ 6063.645374@0] [0x10000104]: 0x00000001
[ 6063.645379@0] [0x10000105]: 0x00000003
[ 6063.645523@0] [0x10000170]: 0x00000004
[ 6063.645547@0] [0x10000180]: 0x000000ff
[ 6063.645552@0] [0x10000181]: 0x000000ff
[ 6063.645556@0] [0x10000182]: 0x00000003
[ 6063.645561@0] [0x10000183]: 0x00000007
[ 6063.645566@0] [0x10000184]: 0x0000003f
[ 6063.645570@0] [0x10000185]: 0x00000002
[ 6063.645576@0] [0x10000187]: 0x000000ff
[ 6063.645581@0] [0x10000188]: 0x00000003
[ 6063.647228@1] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 6063.647345@0] hdmitx: system: irq 80000001
[ 6063.647367@0] Start = 0x10000100 End = 0x100001ff
[ 6063.647378@0] [0x10000104]: 0x00000001
[ 6063.647383@0] [0x10000105]: 0x00000003
[ 6063.647527@0] [0x10000170]: 0x00000004
[ 6063.647552@0] [0x10000180]: 0x000000ff
[ 6063.647556@0] [0x10000181]: 0x000000ff
[ 6063.647561@0] [0x10000182]: 0x00000003
[ 6063.647565@0] [0x10000183]: 0x00000007
[ 6063.647570@0] [0x10000184]: 0x0000003f
[ 6063.647575@0] [0x10000185]: 0x00000002
[ 6063.647580@0] [0x10000187]: 0x000000ff
[ 6063.647585@0] [0x10000188]: 0x00000003
[ 6063.649239@1] hdmitx: ddc rd8b error 0x54 0x21
[ 6063.765228@1] hdmitx: system: PHY Setting Done
[ 6063.765265@0] hdmitx: system: irq 80000001
[ 6063.765316@0] Start = 0x10000100 End = 0x100001ff
[ 6063.765335@0] [0x10000104]: 0x00000001
[ 6063.765587@0] [0x10000180]: 0x000000ff
[ 6063.765597@0] [0x10000181]: 0x000000ff
[ 6063.765606@0] [0x10000182]: 0x00000003
[ 6063.765615@0] [0x10000183]: 0x00000007
[ 6063.765624@0] [0x10000184]: 0x0000003f
[ 6063.765632@0] [0x10000185]: 0x00000002
[ 6063.765643@0] [0x10000187]: 0x000000ff
[ 6063.765652@0] [0x10000188]: 0x00000003
[ 6063.769266@1] Sink is HDMI device
[ 6063.769292@1] hdmitx: system: packet: can't get vendor data
[ 6063.769304@1] 1080p60hz 2997 50
[ 6063.769316@1] 1080p60hz 60 1
[ 6063.769324@1] hdmtix: set audio
[ 6063.769342@1] hdmitx tx_aud_src = 0
[ 6063.769383@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 6063.769392@1] hdmitx aud_n_para = 6272
[ 6063.769420@1] hdmitx set channel status
[ 6063.769504@1] hdmitx: audio: Audio Type: PCM
[ 6063.769542@1] fb: current vmode=1080p60hz, cmd: 0x10000
[ 6063.833478@1] fb: osd[0] enable: 1 (kodi.bin)
[ 6123.972089@0] aml_snd_m8_card aml_m8_snd.47: I2S playback disable
[ 6123.972139@0] aml_snd_m8_card aml_m8_snd.47: IEC958 playback disable
[ 6123.973656@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 6123.973692@2] aml_spdif_dai: share the same clock
[ 6123.973726@2] aml_audio_hw: IEC958 PCM32
[ 6123.973753@2] hdmitx: audio: aout notify rate 44100
[ 6123.973772@2] hdmitx: audio: aout notify size 32
[ 6123.973789@2] hdmitx: audio: no update
[ 6123.973824@2] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source