LibreELEC:~ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.3.0-rc8 (user@user-VirtualBox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP Wed Sep 11 11:52:50 MSK 2019 [ 0.000000] Machine model: MeCool KI Pro (S905D) [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000040000000, size 896 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 477952 [ 0.000000] DMA32 zone: 7616 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 477952 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 22 pages/cpu s51928 r8192 d29992 u90112 [ 0.000000] pcpu-alloc: s51928 r8192 d29992 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336 [ 0.000000] Kernel command line: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyAML0,115200n8 console=tty0 mac=D0:76:58:0A:5B:28 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 933904K/1911808K available (9342K kernel code, 820K rwdata, 2900K rodata, 4672K init, 585K bss, 60400K reserved, 917504K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.000000] random: get_random_bytes called from start_kernel+0x2e4/0x460 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000214] Console: colour dummy device 80x25 [ 0.000223] printk: console [tty0] enabled [ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.000254] pid_max: default: 32768 minimum: 301 [ 0.000372] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000383] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000737] *** VALIDATE proc *** [ 0.000900] *** VALIDATE cgroup1 *** [ 0.000905] *** VALIDATE cgroup2 *** [ 0.001393] ASID allocator initialised with 32768 entries [ 0.001444] rcu: Hierarchical SRCU implementation. [ 0.002951] smp: Bringing up secondary CPUs ... [ 0.003357] Detected VIPT I-cache on CPU1 [ 0.003406] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.003838] Detected VIPT I-cache on CPU2 [ 0.003868] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.004265] Detected VIPT I-cache on CPU3 [ 0.004291] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.004344] smp: Brought up 1 node, 4 CPUs [ 0.004347] SMP: Total of 4 processors activated. [ 0.004350] CPU features: detected: 32-bit EL0 Support [ 0.004353] CPU features: detected: CRC32 instructions [ 0.004518] CPU: All CPU(s) started at EL2 [ 0.004530] alternatives: patching kernel code [ 0.005231] devtmpfs: initialized [ 0.009404] Registered cp15_barrier emulation handler [ 0.009413] Registered setend emulation handler [ 0.009555] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.009567] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033094] pinctrl core: initialized pinctrl subsystem [ 0.033741] NET: Registered protocol family 16 [ 0.034466] cpuidle: using governor menu [ 0.034627] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.035529] DMA: preallocated 256 KiB pool for atomic allocations [ 0.035536] Serial: AMBA PL011 UART driver [ 0.048562] cryptd: max_cpu_qlen set to 1000 [ 0.052625] SCSI subsystem initialized [ 0.052768] usbcore: registered new interface driver usbfs [ 0.052797] usbcore: registered new interface driver hub [ 0.052863] usbcore: registered new device driver usb [ 0.053050] mc: Linux media interface: v0.10 [ 0.053071] videodev: Linux video capture interface: v2.00 [ 0.053128] pps_core: LinuxPPS API ver. 1 registered [ 0.053130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.053437] Advanced Linux Sound Architecture Driver Initialized. [ 0.054113] clocksource: Switched to clocksource arch_sys_counter [ 0.054337] FS-Cache: Loaded [ 0.058349] thermal_sys: Registered thermal governor 'step_wise' [ 0.058651] NET: Registered protocol family 2 [ 0.059036] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.059064] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.059169] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.059367] TCP: Hash tables configured (established 16384 bind 16384) [ 0.059472] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.059514] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.059675] NET: Registered protocol family 1 [ 0.060056] RPC: Registered named UNIX socket transport module. [ 0.060059] RPC: Registered udp transport module. [ 0.060060] RPC: Registered tcp transport module. [ 0.060062] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.069520] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.077837] Initialise system trusted keyrings [ 0.077995] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.082743] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.082890] FS-Cache: Netfs 'nfs' registered for caching [ 0.083317] NFS: Registering the id_resolver key type [ 0.083339] Key type id_resolver registered [ 0.083341] Key type id_legacy registered [ 0.083349] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.083537] FS-Cache: Netfs 'cifs' registered for caching [ 0.083745] Key type cifs.idmap registered [ 0.097163] NET: Registered protocol family 38 [ 0.097175] Key type asymmetric registered [ 0.097178] Asymmetric key parser 'x509' registered [ 0.097226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.097230] io scheduler mq-deadline registered [ 0.097232] io scheduler kyber registered [ 0.097356] io scheduler bfq registered [ 0.105442] soc soc0: Amlogic Meson GXL (S905D) Revision 21:b (2:2) Detected [ 0.106583] Serial: AMBA driver [ 0.106878] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart [ 0.106983] serial serial0: tty port ttyAML6 registered [ 0.107163] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 14, base_baud = 1500000) is a meson_uart [ 0.107199] printk: console [ttyAML0] enabled [ 0.114504] brd: module loaded [ 0.114579] loop: module loaded [ 0.125498] Loading iSCSI transport class v2.0-870. [ 0.125840] iscsi: registered transport (tcp) [ 0.126580] libphy: Fixed MDIO Bus: probed [ 0.126914] tun: Universal TUN/TAP device driver, 1.6 [ 0.128522] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 0.128531] meson8b-dwmac c9410000.ethernet: no reset control found [ 0.128983] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 0.128991] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 0.128996] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 0.129000] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 0.129004] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 0.129007] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 0.129011] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 0.129037] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 0.129041] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 0.129045] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.129160] libphy: stmmac: probed [ 0.130581] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2 [ 0.131369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.131384] ehci-platform: EHCI generic platform driver [ 0.131487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.131494] ohci-platform: OHCI generic platform driver [ 0.131920] usbcore: registered new interface driver usb-storage [ 0.132070] mousedev: PS/2 mouse device common for all mice [ 0.132312] i2c /dev entries driver [ 0.134209] sdhci: Secure Digital Host Controller Interface driver [ 0.134214] sdhci: Copyright(c) Pierre Ossman [ 0.134236] Synopsys Designware Multimedia Card Interface Driver [ 0.135337] meson-gx-mmc d0072000.mmc: Got CD GPIO [ 0.160601] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.186153] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.186840] ledtrig-cpu: registered to indicate activity on CPUs [ 0.187172] meson-sm: secure-monitor enabled [ 0.187298] hidraw: raw HID events driver (C) Jiri Kosina [ 0.188207] usbcore: registered new interface driver usbhid [ 0.188210] usbhid: USB HID core driver [ 0.188415] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.192351] debugfs: Directory 'c1105400.audio' with parent 'regmap' already present! [ 0.196433] NET: Registered protocol family 10 [ 0.197128] Segment Routing with IPv6 [ 0.197180] NET: Registered protocol family 17 [ 0.197234] Key type dns_resolver registered [ 0.197809] Loading compiled-in X.509 certificates [ 0.210144] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 0.210358] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.210361] [drm] No driver support for vblank timestamp query. [ 0.214995] mmc0: new high speed SDHC card at address aaaa [ 0.215950] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 0.217202] mmcblk0: p1 p2 [ 0.237505] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 0.237912] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 0.238303] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops 0xffff000011a28ad8) [ 0.238669] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 0.286057] mmc1: new HS200 MMC card at address 0001 [ 0.287008] mmcblk1: mmc1:0001 AWPD3R 14.6 GiB [ 0.287675] mmcblk1boot0: mmc1:0001 AWPD3R partition 1 4.00 MiB [ 0.288284] mmcblk1boot1: mmc1:0001 AWPD3R partition 2 4.00 MiB [ 0.288451] mmcblk1rpmb: mmc1:0001 AWPD3R partition 3 4.00 MiB, chardev (244:0) [ 0.291859] mmcblk1: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > [ 0.310049] random: fast init done [ 0.458600] [drm] kms: can't enable cloning when we probably wanted to. [ 0.729754] Console: switching to colour frame buffer device 240x67 [ 0.770921] meson-drm d0100000.vpu: fb0: mesondrmfb frame buffer device [ 0.771314] libphy: mdio_mux: probed [ 0.771983] libphy: mdio_mux: probed [ 0.817107] phy phy-d0078080.phy.2: unsupported PHY mode 5 [ 0.819365] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.819386] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.819521] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 0.819563] xhci-hcd xhci-hcd.0.auto: irq 40, io mem 0xc9000000 [ 0.819801] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.819806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.819811] usb usb1: Product: xHCI Host Controller [ 0.819815] usb usb1: Manufacturer: Linux 5.3.0-rc8 xhci-hcd [ 0.819818] usb usb1: SerialNumber: xhci-hcd.0.auto [ 0.820185] hub 1-0:1.0: USB hub found [ 0.820205] hub 1-0:1.0: 2 ports detected [ 0.820426] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.820440] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.820453] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.820490] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.820555] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.820560] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.820565] usb usb2: Product: xHCI Host Controller [ 0.820569] usb usb2: Manufacturer: Linux 5.3.0-rc8 xhci-hcd [ 0.820572] usb usb2: SerialNumber: xhci-hcd.0.auto [ 0.820887] hub 2-0:1.0: USB hub found [ 0.820906] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.825185] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq [ 0.852069] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 0.856163] printk: console [netcon0] enabled [ 0.856166] netconsole: network logging started [ 0.856171] hctosys: unable to open rtc device (rtc0) [ 0.857655] ALSA device list: [ 0.857661] No soundcards found. [ 0.859454] Freeing unused kernel memory: 4672K [ 0.859504] Run /init as init process [ 0.886727] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.888831] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.890959] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.894758] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.899491] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 0.970154] mmc2: new high speed SDIO card at address 0001 [ 1.147587] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.288861] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.288874] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.288882] usb 1-1: Product: USB2.0 Hub [ 1.333008] hub 1-1:1.0: USB hub found [ 1.333331] hub 1-1:1.0: 4 ports detected [ 1.677531] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd [ 1.771774] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54 [ 1.771845] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.771893] usb 1-1.4: Product: USB2.1 Hub [ 1.771939] usb 1-1.4: Manufacturer: GenesysLogic [ 1.815608] hub 1-1.4:1.0: USB hub found [ 1.816181] hub 1-1.4:1.0: 4 ports detected [ 2.120833] usb 1-1.4.1: new high-speed USB device number 4 using xhci-hcd [ 2.234700] usb 1-1.4.1: New USB device found, idVendor=734c, idProduct=5521, bcdDevice= 0.01 [ 2.234707] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.234711] usb 1-1.4.1: Product: TBS 5521 [ 2.234715] usb 1-1.4.1: Manufacturer: TBS-Tech [ 2.273325] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 9.513618] systemd[1]: System time before build time, advancing clock. [ 9.523305] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 9.523652] systemd[1]: Detected architecture arm64. [ 9.525789] systemd[1]: Set hostname to . [ 9.643811] random: systemd: uninitialized urandom read (16 bytes read) [ 9.644203] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.689830] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 9.689923] random: systemd: uninitialized urandom read (16 bytes read) [ 9.701459] systemd[1]: Listening on RPCbind Server Activation Socket. [ 9.701591] random: systemd: uninitialized urandom read (16 bytes read) [ 9.701627] systemd[1]: Reached target RPC Port Mapper. [ 9.701919] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.702527] systemd[1]: Listening on udev Kernel Socket. [ 9.703256] systemd[1]: Created slice User and Session Slice. [ 9.789689] kernel-overlays-setup: setup base modules [ 9.854784] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.3.0-rc8 [ 9.867370] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 9.867580] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 9.868604] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf [ 9.921608] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/5.3.0-rc8 [ 9.921726] kernel-overlays-setup: running depmod [ 10.510747] [drm] kms: can't enable cloning when we probably wanted to. [ 14.173585] kernel-overlays-setup: added firmware from /storage/.config/firmware [ 14.173649] kernel-overlays-setup: done [ 14.341065] systemd-journald[367]: Received request to flush runtime journal from PID 1 [ 14.796013] random: crng init done [ 14.796023] random: 7 urandom warning(s) missed due to ratelimiting [ 15.813155] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0 [ 15.862770] v4l2_mem2mem: loading out-of-tree module taints kernel. [ 15.864736] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 15.870804] WARNING: You are using an experimental version of the media stack. [ 15.870804] As the driver is backported to an older kernel, it doesn't offer [ 15.870804] enough quality for its usage in production. [ 15.870804] Use it with care. [ 15.870804] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 15.870804] [ 15.929851] Registered IR keymap rc-geekbox [ 15.930734] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 15.956979] lima d00c0000.gpu: bus rate = 166666667 [ 15.956988] lima d00c0000.gpu: mod rate = 744000000 [ 15.960592] Bluetooth: Core ver 2.22 [ 15.960679] NET: Registered protocol family 31 [ 15.960682] Bluetooth: HCI device and connection manager initialized [ 15.960706] Bluetooth: HCI socket layer initialized [ 15.960712] Bluetooth: L2CAP socket layer initialized [ 15.960727] Bluetooth: SCO socket layer initialized [ 15.962484] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 15.962527] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 15.962555] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 15.962645] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 15.962680] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 15.962686] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 15.989292] [drm] Initialized lima 1.0.0 20190217 for d00c0000.gpu on minor 1 [ 16.001996] IR NEC protocol handler initialized [ 16.011929] Bluetooth: HCI UART driver ver 2.3 [ 16.011938] Bluetooth: HCI UART protocol H4 registered [ 16.011940] Bluetooth: HCI UART protocol BCSP registered [ 16.013229] Bluetooth: HCI UART protocol LL registered [ 16.013236] Bluetooth: HCI UART protocol ATH3K registered [ 16.015126] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 16.016440] Bluetooth: HCI UART protocol Intel registered [ 16.017529] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator [ 16.017602] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator [ 16.022765] Bluetooth: HCI UART protocol Broadcom registered [ 16.022960] Bluetooth: HCI UART protocol QCA registered [ 16.022966] Bluetooth: HCI UART protocol AG6XX registered [ 16.023106] Bluetooth: HCI UART protocol Marvell registered [ 16.031067] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0 [ 16.031220] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input1 [ 16.031637] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 16.047907] meson-ir c8100580.ir: receiver initialized [ 16.122749] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.179909] dvb-usb: found a 'TBS 5520se USB2.0' in cold state, will try to load a firmware [ 16.189010] asoc-simple-card sound: i2s-hifi <-> meson-aiu-i2s.1.auto mapping ok [ 16.194814] Bluetooth: hci1: BCM: chip id 107 [ 16.195145] Bluetooth: hci1: BCM: features 0x2f [ 16.198964] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5521.fw' [ 16.198974] tbs5520se: start downloading TBS5520se firmware [ 16.199252] Bluetooth: hci1: BCM4345C0 [ 16.199268] Bluetooth: hci1: BCM4345C0 (003.001.025) build 0000 [ 16.314155] dvb-usb: found a 'TBS 5520se USB2.0' in warm state. [ 16.314506] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 16.314796] dvbdev: DVB: registering new adapter (TBS 5520se USB2.0) [ 16.314817] usb 1-1.4.1: media controller created [ 16.417174] dvb-usb: MAC address: 00:22:ab:c0:50:52 [ 16.422260] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 16.459966] i2c i2c-2: Added multiplexed i2c bus 3 [ 16.459978] si2183 2-0067: Silicon Labs Si2183 successfully attached [ 16.491003] i2c i2c-3: av201x: Airoha Technology AV201x successfully attached [ 16.504452] si2157 3-0061: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 16.552571] usb 1-1.4.1: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2183)... [ 16.552595] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2183' registered. [ 16.552903] usb 1-1.4.1: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2183)... [ 16.552934] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2183' registered. [ 16.559395] dvb-usb: TBS 5520se USB2.0 successfully initialized and connected. [ 16.559640] usbcore: registered new interface driver tbs5520se [ 16.613534] input: eventlircd as /devices/virtual/input/input2 [ 16.636159] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 [ 16.636165] Mem abort info: [ 16.636167] ESR = 0x96000004 [ 16.636170] Exception class = DABT (current EL), IL = 32 bits [ 16.636172] SET = 0, FnV = 0 [ 16.636174] EA = 0, S1PTW = 0 [ 16.636175] Data abort info: [ 16.636176] ISV = 0, ISS = 0x00000004 [ 16.636178] CM = 0, WnR = 0 [ 16.636182] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000025180000 [ 16.636184] [0000000000000038] pgd=0000000000000000 [ 16.636188] Internal error: Oops: 96000004 [#1] SMP [ 16.636312] Modules linked in: si2157(O) av201x(O) si2183(O) dvb_usb_tbs5520se(O) dvb_usb(O) brcmfmac snd_soc_simple_card snd_soc_simple_card_utils brcmutil hci_uart btqca btsdio btbcm ir_nec_decoder(O) btintel lima gpu_sched bluetooth cfg80211 rc_geekbox(O) ao_cec meson_ir(O) rc_core(O) meson_vdec(C) videobuf2_dma_contig(O) v4l2_mem2mem(O) ecdh_generic ecc rfkill gpio_keys_polled input_polldev [ 16.670197] CPU: 2 PID: 540 Comm: kdvb-ad-0-fe-0 Tainted: G C O 5.3.0-rc8 #1 [ 16.678297] Hardware name: MeCool KI Pro (S905D) (DT) [ 16.683303] pstate: 40000005 (nZcv daif -PAN -UAO) [ 16.688056] pc : dvb_usb_fe_wakeup+0x18/0x60 [dvb_usb] [ 16.693141] lr : dvb_frontend_init+0x24/0xa8 [ 16.697358] sp : ffff00001070bd80 [ 16.700636] x29: ffff00001070bd80 x28: 0000000000000000 [ 16.705896] x27: ffff80002ed6bb28 x26: ffff000012118548 [ 16.711158] x25: ffff000012209d40 x24: ffff80002726c1b8 [ 16.716432] x23: ffff0000103839e8 x22: ffff0000121e3918 [ 16.721680] x21: ffff80003cc9c680 x20: ffff80002726c000 [ 16.726942] x19: ffff80002ed6b800 x18: 0000000000000000 [ 16.732203] x17: 0000000000000000 x16: 0000000000000000 [ 16.737463] x15: 0000000000000000 x14: ffff00001212e120 [ 16.742725] x13: 0000000000000000 x12: 0000000000000000 [ 16.747987] x11: ffff000012118548 x10: 00000000000007e0 [ 16.753247] x9 : ffff00001070bdb0 x8 : ffff80003cc9cec0 [ 16.758510] x7 : 0000000000000400 x6 : ffff80003cc9c680 [ 16.763783] x5 : 0000000000000000 x4 : ffff80003d9e03d0 [ 16.769031] x3 : 0000000000000000 x2 : 0000000000000000 [ 16.774292] x1 : 0000000000000001 x0 : 0000000000000000 [ 16.779554] Call trace: [ 16.781983] dvb_usb_fe_wakeup+0x18/0x60 [dvb_usb] [ 16.786720] dvb_frontend_init+0x24/0xa8 [ 16.790599] dvb_frontend_thread+0x68/0x618 [ 16.794739] kthread+0x120/0x128 [ 16.797931] ret_from_fork+0x10/0x1c [ 16.801470] Code: 910003fd a90153f3 aa0003f3 f9418000 (f9401c14) [ 16.807503] ---[ end trace 938090a9350b5566 ]--- [ 17.005453] Bluetooth: hci1: BCM4345C0 (003.001.025) build 0075 [ 17.132542] EXT4-fs (mmcblk1p9): warning: maximal mount count reached, running e2fsck is recommended [ 17.137312] EXT4-fs (mmcblk1p3): warning: maximal mount count reached, running e2fsck is recommended [ 17.146165] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null) [ 17.147284] EXT4-fs (mmcblk1p13): mounted filesystem with ordered data mode. Opts: (null) [ 17.147407] EXT4-fs (mmcblk1p14): mounted filesystem with ordered data mode. Opts: (null) [ 17.151920] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 17.271448] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet] [ 17.276780] meson8b-dwmac c9410000.ethernet eth0: phy: setting supported 00,00000000,000062ff advertising 00,00000000,000062ff [ 17.293138] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found [ 17.295346] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW [ 17.301975] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode [ 17.309720] meson8b-dwmac c9410000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/Unknown/Unknown adv=00,00000000,000062ff pause=10 link=0 an=1 [ 17.333300] meson8b-dwmac c9410000.ethernet eth0: phy link down rgmii/Unknown/Unknown [ 18.040330] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 18.055038] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 18.058393] usbcore: registered new interface driver brcmfmac [ 18.084664] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.amlogic,p230.txt failed with error -2 [ 18.277678] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 18.280939] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 18.304324] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e [ 19.890449] meson8b-dwmac c9410000.ethernet eth0: phy link up rgmii/1Gbps/Full [ 19.892333] meson8b-dwmac c9410000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/1Gbps/Full adv=00,00000000,00000000 pause=0f link=1 an=0 [ 19.911678] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.914812] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.925826] 8021q: 802.1Q VLAN Support v1.8 [ 22.281949] __hold: enable=1 [ 22.282079] __dma_enable: enable=0 [ 22.284070] __hold: enable=1 [ 22.285595] __dma_enable: enable=0 [ 22.289992] __hold: enable=1 [ 22.291788] __dma_enable: enable=0 [ 22.295900] __hold: enable=1 [ 22.297965] __dma_enable: enable=0 [ 22.304003] __hold: enable=1 [ 22.309247] __dma_enable: enable=0 [ 22.331380] __hold: enable=1 [ 22.336108] __dma_enable: enable=0 [ 22.342459] __hold: enable=1 [ 22.347142] __dma_enable: enable=0 [ 22.363758] __hold: enable=1 [ 22.368230] __dma_enable: enable=0 [ 22.374535] __setup_desc: width=24 channels=2 desc=544 [ 22.379017] meson_aiu_i2s_dma_hw_params: physical_width=32 buffer_bytes=70656 period_bytes=17664 [ 22.387297] __dma_init_mem [ 22.392186] __dma_init_mem [ 22.399624] __dma_enable: enable=1 [ 22.404123] __hold: enable=0