LibreELEC (community): devel-20190913110817-60568a1 (AMLGX.arm) LibreELEC:~ # lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 734c:5521 TBS Technologies China Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub LibreELEC:~ # dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.3.0-rc8 (user@user-VirtualBox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP Wed Sep 11 11:52:50 MSK 2019 [ 0.000000] Machine model: MeCool KI Pro (S905D) [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000040000000, size 896 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 477952 [ 0.000000] DMA32 zone: 7616 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 477952 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 22 pages/cpu s51928 r8192 d29992 u90112 [ 0.000000] pcpu-alloc: s51928 r8192 d29992 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336 [ 0.000000] Kernel command line: boot=LABEL=LIBREELEC disk=LABEL=STORAGE quiet console=ttyAML0,115200n8 console=tty0 mac=D0:76:58:0A:5B:28 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 933904K/1911808K available (9342K kernel code, 820K rwdata, 2900K rodata, 4672K init, 585K bss, 60400K reserved, 917504K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized [ 0.000000] random: get_random_bytes called from start_kernel+0x2e4/0x460 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000214] Console: colour dummy device 80x25 [ 0.000224] printk: console [tty0] enabled [ 0.000247] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.000254] pid_max: default: 32768 minimum: 301 [ 0.000377] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000388] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000747] *** VALIDATE proc *** [ 0.000910] *** VALIDATE cgroup1 *** [ 0.000916] *** VALIDATE cgroup2 *** [ 0.001399] ASID allocator initialised with 32768 entries [ 0.001450] rcu: Hierarchical SRCU implementation. [ 0.002973] smp: Bringing up secondary CPUs ... [ 0.003374] Detected VIPT I-cache on CPU1 [ 0.003423] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.003849] Detected VIPT I-cache on CPU2 [ 0.003879] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.004273] Detected VIPT I-cache on CPU3 [ 0.004299] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.004352] smp: Brought up 1 node, 4 CPUs [ 0.004356] SMP: Total of 4 processors activated. [ 0.004359] CPU features: detected: 32-bit EL0 Support [ 0.004362] CPU features: detected: CRC32 instructions [ 0.004527] CPU: All CPU(s) started at EL2 [ 0.004540] alternatives: patching kernel code [ 0.005235] devtmpfs: initialized [ 0.009431] Registered cp15_barrier emulation handler [ 0.009440] Registered setend emulation handler [ 0.009579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.009592] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033135] pinctrl core: initialized pinctrl subsystem [ 0.033786] NET: Registered protocol family 16 [ 0.034505] cpuidle: using governor menu [ 0.034665] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.035568] DMA: preallocated 256 KiB pool for atomic allocations [ 0.035575] Serial: AMBA PL011 UART driver [ 0.048545] cryptd: max_cpu_qlen set to 1000 [ 0.052501] SCSI subsystem initialized [ 0.052645] usbcore: registered new interface driver usbfs [ 0.052673] usbcore: registered new interface driver hub [ 0.052718] usbcore: registered new device driver usb [ 0.052905] mc: Linux media interface: v0.10 [ 0.052927] videodev: Linux video capture interface: v2.00 [ 0.052982] pps_core: LinuxPPS API ver. 1 registered [ 0.052984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.053242] Advanced Linux Sound Architecture Driver Initialized. [ 0.053885] clocksource: Switched to clocksource arch_sys_counter [ 0.054097] FS-Cache: Loaded [ 0.058023] thermal_sys: Registered thermal governor 'step_wise' [ 0.058319] NET: Registered protocol family 2 [ 0.058704] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.058733] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.058839] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.059035] TCP: Hash tables configured (established 16384 bind 16384) [ 0.059137] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.059179] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.059340] NET: Registered protocol family 1 [ 0.059669] RPC: Registered named UNIX socket transport module. [ 0.059672] RPC: Registered udp transport module. [ 0.059674] RPC: Registered tcp transport module. [ 0.059676] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.069108] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.076853] Initialise system trusted keyrings [ 0.076985] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.081771] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.081919] FS-Cache: Netfs 'nfs' registered for caching [ 0.082339] NFS: Registering the id_resolver key type [ 0.082359] Key type id_resolver registered [ 0.082361] Key type id_legacy registered [ 0.082369] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.082554] FS-Cache: Netfs 'cifs' registered for caching [ 0.082763] Key type cifs.idmap registered [ 0.096273] NET: Registered protocol family 38 [ 0.096284] Key type asymmetric registered [ 0.096287] Asymmetric key parser 'x509' registered [ 0.096340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.096345] io scheduler mq-deadline registered [ 0.096347] io scheduler kyber registered [ 0.096476] io scheduler bfq registered [ 0.104397] soc soc0: Amlogic Meson GXL (S905D) Revision 21:b (2:2) Detected [ 0.105573] Serial: AMBA driver [ 0.105869] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart [ 0.105982] serial serial0: tty port ttyAML6 registered [ 0.106155] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 14, base_baud = 1500000) is a meson_uart [ 0.106191] printk: console [ttyAML0] enabled [ 0.113218] brd: module loaded [ 0.113288] loop: module loaded [ 0.124232] Loading iSCSI transport class v2.0-870. [ 0.124580] iscsi: registered transport (tcp) [ 0.125325] libphy: Fixed MDIO Bus: probed [ 0.125657] tun: Universal TUN/TAP device driver, 1.6 [ 0.127271] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 0.127281] meson8b-dwmac c9410000.ethernet: no reset control found [ 0.127717] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 0.127724] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 0.127730] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 0.127734] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 0.127737] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 0.127741] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 0.127744] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 0.127771] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 0.127774] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 0.127778] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.127902] libphy: stmmac: probed [ 0.129326] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2 [ 0.129986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.129999] ehci-platform: EHCI generic platform driver [ 0.130106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.130113] ohci-platform: OHCI generic platform driver [ 0.130528] usbcore: registered new interface driver usb-storage [ 0.130718] mousedev: PS/2 mouse device common for all mice [ 0.130953] i2c /dev entries driver [ 0.132844] sdhci: Secure Digital Host Controller Interface driver [ 0.132848] sdhci: Copyright(c) Pierre Ossman [ 0.132865] Synopsys Designware Multimedia Card Interface Driver [ 0.133992] meson-gx-mmc d0072000.mmc: Got CD GPIO [ 0.160376] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 0.185892] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.186612] ledtrig-cpu: registered to indicate activity on CPUs [ 0.186937] meson-sm: secure-monitor enabled [ 0.187076] hidraw: raw HID events driver (C) Jiri Kosina [ 0.187986] usbcore: registered new interface driver usbhid [ 0.187989] usbhid: USB HID core driver [ 0.188198] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 0.192122] debugfs: Directory 'c1105400.audio' with parent 'regmap' already present! [ 0.196150] NET: Registered protocol family 10 [ 0.196835] Segment Routing with IPv6 [ 0.196894] NET: Registered protocol family 17 [ 0.196951] Key type dns_resolver registered [ 0.197686] Loading compiled-in X.509 certificates [ 0.208879] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 0.209081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.209084] [drm] No driver support for vblank timestamp query. [ 0.219183] mmc0: new high speed SDHC card at address aaaa [ 0.220112] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 0.221433] mmcblk0: p1 p2 [ 0.233949] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 0.234363] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 0.234744] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops 0xffff000011a28ad8) [ 0.235109] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 0.302307] mmc1: new HS200 MMC card at address 0001 [ 0.303262] mmcblk1: mmc1:0001 AWPD3R 14.6 GiB [ 0.303926] mmcblk1boot0: mmc1:0001 AWPD3R partition 1 4.00 MiB [ 0.304548] mmcblk1boot1: mmc1:0001 AWPD3R partition 2 4.00 MiB [ 0.304727] mmcblk1rpmb: mmc1:0001 AWPD3R partition 3 4.00 MiB, chardev (244:0) [ 0.307669] random: fast init done [ 0.308507] mmcblk1: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > [ 0.454355] [drm] kms: can't enable cloning when we probably wanted to. [ 0.722881] Console: switching to colour frame buffer device 240x67 [ 0.764060] meson-drm d0100000.vpu: fb0: mesondrmfb frame buffer device [ 0.764445] libphy: mdio_mux: probed [ 0.765084] libphy: mdio_mux: probed [ 0.810218] phy phy-d0078080.phy.2: unsupported PHY mode 5 [ 0.812384] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.812403] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.812543] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010 [ 0.812585] xhci-hcd xhci-hcd.0.auto: irq 40, io mem 0xc9000000 [ 0.812818] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.812823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.812828] usb usb1: Product: xHCI Host Controller [ 0.812832] usb usb1: Manufacturer: Linux 5.3.0-rc8 xhci-hcd [ 0.812835] usb usb1: SerialNumber: xhci-hcd.0.auto [ 0.813191] hub 1-0:1.0: USB hub found [ 0.813210] hub 1-0:1.0: 2 ports detected [ 0.813434] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.813445] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 0.813457] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.813492] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.813550] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.813555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.813559] usb usb2: Product: xHCI Host Controller [ 0.813563] usb usb2: Manufacturer: Linux 5.3.0-rc8 xhci-hcd [ 0.813567] usb usb2: SerialNumber: xhci-hcd.0.auto [ 0.813845] hub 2-0:1.0: USB hub found [ 0.813862] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.818319] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq [ 0.843731] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 0.847947] printk: console [netcon0] enabled [ 0.847950] netconsole: network logging started [ 0.847955] hctosys: unable to open rtc device (rtc0) [ 0.849386] ALSA device list: [ 0.849392] No soundcards found. [ 0.851232] Freeing unused kernel memory: 4672K [ 0.851284] Run /init as init process [ 0.876510] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.878681] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.880851] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.884721] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.889395] mmc2: queuing unknown CIS tuple 0x81 (9 bytes) [ 0.960247] mmc2: new high speed SDIO card at address 0001 [ 1.144013] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.285194] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.285204] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.285208] usb 1-1: Product: USB2.0 Hub [ 1.325886] hub 1-1:1.0: USB hub found [ 1.326165] hub 1-1:1.0: 4 ports detected [ 1.670616] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd [ 1.766329] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54 [ 1.766337] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.766340] usb 1-1.4: Product: USB2.1 Hub [ 1.766344] usb 1-1.4: Manufacturer: GenesysLogic [ 1.805813] hub 1-1.4:1.0: USB hub found [ 1.806077] hub 1-1.4:1.0: 4 ports detected [ 1.985536] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.110697] usb 1-1.4.1: new high-speed USB device number 4 using xhci-hcd [ 2.224739] usb 1-1.4.1: New USB device found, idVendor=734c, idProduct=5521, bcdDevice= 0.01 [ 2.224769] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.224789] usb 1-1.4.1: Product: TBS 5521 [ 2.224808] usb 1-1.4.1: Manufacturer: TBS-Tech [ 6.864468] systemd[1]: System time before build time, advancing clock. [ 6.874205] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 6.874558] systemd[1]: Detected architecture arm64. [ 6.876641] systemd[1]: Set hostname to . [ 7.051757] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 7.052012] random: systemd: uninitialized urandom read (16 bytes read) [ 7.055121] systemd[1]: Starting Show Version... [ 7.055319] random: systemd: uninitialized urandom read (16 bytes read) [ 7.067058] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.067198] random: systemd: uninitialized urandom read (16 bytes read) [ 7.067624] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.068099] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.068938] systemd[1]: Created slice User and Session Slice. [ 7.069320] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.142293] kernel-overlays-setup: setup base modules [ 7.207186] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.3.0-rc8 [ 7.219687] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 7.219849] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 7.220867] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf [ 7.284199] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/5.3.0-rc8 [ 7.284318] kernel-overlays-setup: running depmod [ 10.510074] [drm] kms: can't enable cloning when we probably wanted to. [ 11.519957] kernel-overlays-setup: done [ 11.684339] systemd-journald[365]: Received request to flush runtime journal from PID 1 [ 12.118014] random: crng init done [ 12.118023] random: 7 urandom warning(s) missed due to ratelimiting [ 13.171233] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0 [ 13.216772] v4l2_mem2mem: loading out-of-tree module taints kernel. [ 13.219240] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 13.234321] WARNING: You are using an experimental version of the media stack. [ 13.234321] As the driver is backported to an older kernel, it doesn't offer [ 13.234321] enough quality for its usage in production. [ 13.234321] Use it with care. [ 13.234321] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 13.234321] [ 13.262033] Bluetooth: Core ver 2.22 [ 13.262155] NET: Registered protocol family 31 [ 13.262160] Bluetooth: HCI device and connection manager initialized [ 13.262177] Bluetooth: HCI socket layer initialized [ 13.262210] Bluetooth: L2CAP socket layer initialized [ 13.262235] Bluetooth: SCO socket layer initialized [ 13.269879] Bluetooth: HCI UART driver ver 2.3 [ 13.269888] Bluetooth: HCI UART protocol H4 registered [ 13.269890] Bluetooth: HCI UART protocol BCSP registered [ 13.269941] Bluetooth: HCI UART protocol LL registered [ 13.269943] Bluetooth: HCI UART protocol ATH3K registered [ 13.269971] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.270104] Bluetooth: HCI UART protocol Intel registered [ 13.270239] Bluetooth: HCI UART protocol Broadcom registered [ 13.270272] Bluetooth: HCI UART protocol QCA registered [ 13.270274] Bluetooth: HCI UART protocol AG6XX registered [ 13.270316] Bluetooth: HCI UART protocol Marvell registered [ 13.270413] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator [ 13.270481] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator [ 13.273945] Registered IR keymap rc-geekbox [ 13.296955] IR NEC protocol handler initialized [ 13.305746] lima d00c0000.gpu: bus rate = 166666667 [ 13.305755] lima d00c0000.gpu: mod rate = 744000000 [ 13.306138] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 13.306167] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 13.306193] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 13.306220] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 13.306247] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 13.306252] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus [ 13.318346] [drm] Initialized lima 1.0.0 20190217 for d00c0000.gpu on minor 1 [ 13.324663] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0 [ 13.324801] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input1 [ 13.325105] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 13.325811] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.328613] meson-ir c8100580.ir: receiver initialized [ 13.352469] asoc-simple-card sound: i2s-hifi <-> meson-aiu-i2s.1.auto mapping ok [ 13.388061] dvb-usb: found a 'TBS 5520se USB2.0' in cold state, will try to load a firmware [ 13.388144] usb 1-1.4.1: Direct firmware load for dvb-usb-tbsqbox-id5521.fw failed with error -2 [ 13.388150] dvb-usb: did not find the firmware file 'dvb-usb-tbsqbox-id5521.fw' (status -2). You can use /scripts/get_dvb_firmware to get the firmware [ 13.388237] usbcore: registered new interface driver tbs5520se [ 13.422518] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.484549] Bluetooth: hci0: BCM: chip id 107 [ 13.484850] Bluetooth: hci0: BCM: features 0x2f [ 13.486371] Bluetooth: hci0: BCM4345C0 [ 13.486386] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 14.016038] input: eventlircd as /devices/virtual/input/input2 [ 14.281526] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0075 [ 14.591366] EXT4-fs (mmcblk1p13): mounted filesystem with ordered data mode. Opts: (null) [ 14.648213] EXT4-fs (mmcblk1p3): warning: maximal mount count reached, running e2fsck is recommended [ 14.651290] EXT4-fs (mmcblk1p3): recovery complete [ 14.651316] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 14.672885] EXT4-fs (mmcblk1p9): warning: maximal mount count reached, running e2fsck is recommended [ 14.677284] EXT4-fs (mmcblk1p9): recovery complete [ 14.677302] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null) [ 14.752161] EXT4-fs (mmcblk1p14): recovery complete [ 14.752752] EXT4-fs (mmcblk1p14): mounted filesystem with ordered data mode. Opts: (null) [ 14.785289] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet] [ 14.785300] meson8b-dwmac c9410000.ethernet eth0: phy: setting supported 00,00000000,000062ff advertising 00,00000000,000062ff [ 14.788699] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found [ 14.788715] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW [ 14.788726] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode [ 14.788741] meson8b-dwmac c9410000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/Unknown/Unknown adv=00,00000000,000062ff pause=10 link=0 an=1 [ 14.801752] meson8b-dwmac c9410000.ethernet eth0: phy link down rgmii/Unknown/Unknown [ 15.337885] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 15.341374] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 15.341564] usbcore: registered new interface driver brcmfmac [ 15.369022] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.amlogic,p230.txt failed with error -2 [ 15.544087] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 15.544199] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 15.547966] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e [ 17.438000] meson8b-dwmac c9410000.ethernet eth0: phy link up rgmii/1Gbps/Full [ 17.438024] meson8b-dwmac c9410000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/1Gbps/Full adv=00,00000000,00000000 pause=0f link=1 an=0 [ 17.446527] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 17.446559] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.451929] 8021q: 802.1Q VLAN Support v1.8 [ 18.423909] __hold: enable=1 [ 18.423965] __dma_enable: enable=0 [ 18.425248] __hold: enable=1 [ 18.425290] __dma_enable: enable=0 [ 18.426569] __hold: enable=1 [ 18.426610] __dma_enable: enable=0 [ 18.427484] __hold: enable=1 [ 18.427527] __dma_enable: enable=0 [ 18.428439] __hold: enable=1 [ 18.428479] __dma_enable: enable=0 [ 18.446132] __hold: enable=1 [ 18.446174] __dma_enable: enable=0 [ 18.448027] __hold: enable=1 [ 18.448066] __dma_enable: enable=0 [ 18.459935] __hold: enable=1 [ 18.459976] __dma_enable: enable=0 [ 18.461432] __setup_desc: width=24 channels=2 desc=544 [ 18.461447] meson_aiu_i2s_dma_hw_params: physical_width=32 buffer_bytes=70656 period_bytes=17664 [ 18.461502] __dma_init_mem [ 18.461698] __dma_init_mem [ 18.464144] __dma_enable: enable=1 [ 18.464164] __hold: enable=0 [ 100.674936] __dma_enable: enable=0 [ 100.674954] __hold: enable=1 [ 100.675067] __dma_init_mem [ 140.353898] rc rc0: two consecutive events of type space [ 232.491294] __hold: enable=1 [ 232.491344] __dma_enable: enable=0 [ 232.492822] __setup_desc: width=24 channels=2 desc=544 [ 232.492838] meson_aiu_i2s_dma_hw_params: physical_width=32 buffer_bytes=70656 period_bytes=17664 [ 232.492883] __dma_init_mem [ 232.493144] __dma_init_mem [ 232.496016] __dma_enable: enable=1 [ 232.496039] __hold: enable=0 [ 307.146519] __dma_enable: enable=0 [ 307.146537] __hold: enable=1 [ 307.146612] __dma_init_mem