[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.57 (jenkins@leda) (gcc version 8.3.0 (GCC)) #1 SMP Sun Jul 21 18:48:12 EDT 2019 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000 [ 0.000000] On node 0 totalpages: 950272 [ 0.000000] DMA zone: 1584 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 180224 pages, LIFO batch:63 [ 0.000000] HighMem zone: 770048 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d4 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu s41676 r8192 d23860 u73728 [ 0.000000] pcpu-alloc: s41676 r8192 d23860 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 948688 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:3840x2160@30 smsc95xx.macaddr=DC:A6:32:0E:51:22 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=2107-3427 disk=UUID=7df7ff03-b4ad-429f-b34e-ad7a78303add quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3481980K/3801088K available (10240K kernel code, 749K rwdata, 2228K rodata, 6144K init, 557K bss, 56964K reserved, 262144K cma-reserved, 3080192K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xec800000 - 0xff800000 ( 304 MB) [ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 750 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 558 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 32368 entries in 95 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000017] Switching to timer-based delay loop, resolution 18ns [ 0.000249] Console: colour dummy device 80x30 [ 0.000281] console [tty0] enabled [ 0.000331] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000) [ 0.000359] pid_max: default: 32768 minimum: 301 [ 0.000552] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000574] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001309] CPU: Testing write buffer coherency: ok [ 0.001809] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002614] Setting up static identity map for 0x200000 - 0x20003c [ 0.002803] rcu: Hierarchical SRCU implementation. [ 0.005429] smp: Bringing up secondary CPUs ... [ 0.006449] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007611] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008715] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.008883] smp: Brought up 1 node, 4 CPUs [ 0.008899] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.008912] CPU: All CPU(s) started in HYP mode. [ 0.008923] CPU: Virtualization extensions available. [ 0.009663] devtmpfs: initialized [ 0.020430] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.020662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.020688] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.026969] pinctrl core: initialized pinctrl subsystem [ 0.027951] NET: Registered protocol family 16 [ 0.031606] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.032558] cpuidle: using governor ladder [ 0.032607] cpuidle: using governor menu [ 0.033076] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.033089] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.033310] Serial: AMBA PL011 UART driver [ 0.037881] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.082286] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.085541] vgaarb: loaded [ 0.085886] SCSI subsystem initialized [ 0.086095] usbcore: registered new interface driver usbfs [ 0.086150] usbcore: registered new interface driver hub [ 0.086232] usbcore: registered new device driver usb [ 0.090357] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:40, variant start_x [ 0.094758] raspberrypi-firmware soc:firmware: Firmware hash is d2b1b7fb01475cb3914b2086299e32d724e832f1 [ 0.097433] Advanced Linux Sound Architecture Driver Initialized. [ 0.098446] clocksource: Switched to clocksource arch_sys_counter [ 0.183439] FS-Cache: Loaded [ 0.193847] NET: Registered protocol family 2 [ 0.194418] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.194447] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.194509] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.194573] TCP: Hash tables configured (established 8192 bind 8192) [ 0.194704] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.194739] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.194976] NET: Registered protocol family 1 [ 0.195660] RPC: Registered named UNIX socket transport module. [ 0.195673] RPC: Registered udp transport module. [ 0.195686] RPC: Registered tcp transport module. [ 0.195698] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.195718] PCI: CLS 0 bytes, default 64 [ 0.219232] Initialise system trusted keyrings [ 0.219435] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.228468] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.229167] FS-Cache: Netfs 'nfs' registered for caching [ 0.229804] NFS: Registering the id_resolver key type [ 0.229847] Key type id_resolver registered [ 0.229860] Key type id_legacy registered [ 0.229883] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.230352] FS-Cache: Netfs 'cifs' registered for caching [ 0.237452] Key type asymmetric registered [ 0.237467] Asymmetric key parser 'x509' registered [ 0.237655] bounce: pool size: 64 pages [ 0.237703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.237718] io scheduler noop registered (default) [ 0.237732] io scheduler deadline registered [ 0.237900] io scheduler cfq registered [ 0.237914] io scheduler mq-deadline registered [ 0.237928] io scheduler kyber registered [ 0.238073] io scheduler bfq registered [ 0.263560] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000 [ 0.263583] brcm-pcie fd500000.pcie: could not get clock [ 0.263673] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.263726] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000 [ 0.311834] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC) [ 0.312078] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.312097] pci_bus 0000:00: root bus resource [bus 00-01] [ 0.312116] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.312183] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.312406] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.315235] PCI: bus0: Fast back to back transfers disabled [ 0.315259] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.315483] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.315570] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.315826] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.318525] PCI: bus1: Fast back to back transfers disabled [ 0.318544] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 0.318606] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.318627] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.318668] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.318692] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.318771] pci 0000:00:00.0: enabling device (0140 -> 0142) [ 0.318804] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.323308] iproc-rng200 fe104000.rng: hwrng registered [ 0.323621] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.324190] vc-sm: Videocore shared memory driver [ 0.330798] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5ee80) [ 0.331363] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 0.331377] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.331389] [drm] No driver support for vblank timestamp query. [ 0.331402] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 0.685409] Console: switching to colour frame buffer device 480x135 [ 0.785414] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device [ 0.797377] brd: module loaded [ 0.797497] loop: module loaded [ 0.818594] usbcore: registered new interface driver rtsx_usb [ 0.819657] Loading iSCSI transport class v2.0-870. [ 0.820071] iscsi: registered transport (tcp) [ 0.821740] libphy: Fixed MDIO Bus: probed [ 0.821839] tun: Universal TUN/TAP device driver, 1.6 [ 0.822585] bcmgenet fd580000.genet: failed to get enet clock [ 0.822605] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 0.822628] bcmgenet fd580000.genet: failed to get enet-wol clock [ 0.822649] bcmgenet fd580000.genet: failed to get enet-eee clock [ 0.823049] unimac-mdio unimac-mdio.-19: DMA mask not set [ 0.835150] libphy: bcmgenet MII bus: probed [ 0.862621] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval) [ 0.863584] usbcore: registered new interface driver lan78xx [ 0.863646] usbcore: registered new interface driver dm9601 [ 0.863706] usbcore: registered new interface driver smsc95xx [ 0.864050] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.864083] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.866352] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 0.866519] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 56 [ 0.867266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.867283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.867299] usb usb1: Product: xHCI Host Controller [ 0.867313] usb usb1: Manufacturer: Linux 4.19.57 xhci-hcd [ 0.867327] usb usb1: SerialNumber: 0000:01:00.0 [ 0.867894] hub 1-0:1.0: USB hub found [ 0.867959] hub 1-0:1.0: 1 port detected [ 0.868502] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.868528] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.868551] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.868960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 0.868976] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868992] usb usb2: Product: xHCI Host Controller [ 0.869006] usb usb2: Manufacturer: Linux 4.19.57 xhci-hcd [ 0.869021] usb usb2: SerialNumber: 0000:01:00.0 [ 0.869565] hub 2-0:1.0: USB hub found [ 0.869631] hub 2-0:1.0: 4 ports detected [ 0.871000] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.896661] dwc_otg fe980000.usb: base=(ptrval) [ 1.097074] Core Release: 2.80a [ 1.097090] Setting default values for core params [ 1.097116] Finished setting default values for core params [ 1.297526] Using Buffer DMA mode [ 1.297539] Periodic Transfer Interrupt Enhancement - disabled [ 1.297551] Multiprocessor Interrupt Enhancement - disabled [ 1.297566] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.297632] Dedicated Tx FIFOs mode [ 1.298539] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = dbd30000 dma = 0x00000000dbd30000 len=9024 [ 1.298565] FIQ FSM acceleration enabled for : [ 1.298565] Non-periodic Split Transactions [ 1.298565] Periodic Split Transactions [ 1.298565] High-Speed Isochronous Endpoints [ 1.298565] Interrupt/Control Split Transaction hack enabled [ 1.298581] dwc_otg: Microframe scheduler enabled [ 1.298652] WARN::hcd_init_fiq:457: FIQ on core 1 [ 1.298667] WARN::hcd_init_fiq:458: FIQ ASM at c08a01e0 length 36 [ 1.298683] WARN::hcd_init_fiq:497: MPHI regs_base at ec810200 [ 1.298700] dwc_otg fe980000.usb: DWC OTG Controller [ 1.298732] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3 [ 1.298772] dwc_otg fe980000.usb: irq 37, io mem 0x00000000 [ 1.298826] Init: Port Power? op_state=1 [ 1.298839] Init: Power Port (0) [ 1.299169] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.299186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.299201] usb usb3: Product: DWC OTG Controller [ 1.299215] usb usb3: Manufacturer: Linux 4.19.57 dwc_otg_hcd [ 1.299229] usb usb3: SerialNumber: fe980000.usb [ 1.299782] hub 3-0:1.0: USB hub found [ 1.299844] hub 3-0:1.0: 1 port detected [ 1.300571] dwc_otg: FIQ enabled [ 1.300584] dwc_otg: NAK holdoff enabled [ 1.300596] dwc_otg: FIQ split-transaction FSM enabled [ 1.300613] Module dwc_common_port init [ 1.300861] usbcore: registered new interface driver uas [ 1.301001] usbcore: registered new interface driver usb-storage [ 1.301197] mousedev: PS/2 mouse device common for all mice [ 1.301554] i2c /dev entries driver [ 1.304263] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.304488] bcm2835-cpufreq: min=600000 max=1500000 [ 1.305367] sdhci: Secure Digital Host Controller Interface driver [ 1.305379] sdhci: Copyright(c) Pierre Ossman [ 1.305920] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.306528] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.310786] ledtrig-cpu: registered to indicate activity on CPUs [ 1.310853] hidraw: raw HID events driver (C) Jiri Kosina [ 1.312086] usbcore: registered new interface driver usbhid [ 1.312091] usbhid: USB HID core driver [ 1.312541] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 1.313688] [vc_sm_connected_init]: start [ 1.321061] [vc_sm_connected_init]: end - returning 0 [ 1.321826] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 1.321845] [vc_sm_connected_init]: start [ 1.322242] [vc_sm_connected_init]: installed successfully [ 1.324125] NET: Registered protocol family 10 [ 1.325391] Segment Routing with IPv6 [ 1.325469] NET: Registered protocol family 17 [ 1.325559] Key type dns_resolver registered [ 1.325830] Registering SWP/SWPB emulation handler [ 1.326381] Loading compiled-in X.509 certificates [ 1.335943] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.336034] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2 [ 1.339964] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.340797] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver [ 1.341504] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.341510] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.367792] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1 [ 1.386302] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.387993] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.389681] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.392698] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.394377] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.398504] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.405217] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 1.408370] console [netcon0] enabled [ 1.408383] netconsole: network logging started [ 1.408397] of_cfs_init [ 1.408473] of_cfs_init: OK [ 1.408843] ALSA device list: [ 1.408856] No soundcards found. [ 1.418460] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.418682] Freeing unused kernel memory: 6144K [ 1.431177] random: fast init done [ 1.436883] Run /init as init process [ 1.463968] mmc1: new high speed SDIO card at address 0001 [ 1.515129] mmc0: Tuning timeout, falling back to fixed sampling clock [ 1.515181] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 1.516058] mmcblk0: mmc0:0001 SD16G 14.6 GiB (quirks 0x80000000) [ 1.517422] mmcblk0: p1 p2 [ 1.562970] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.562979] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.562986] usb 1-1: Product: USB2.0 Hub [ 1.564130] hub 1-1:1.0: USB hub found [ 1.564436] hub 1-1:1.0: 4 ports detected [ 1.848457] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd [ 1.939104] usb 1-1.1: New USB device found, idVendor=734c, idProduct=5927, bcdDevice= 0.01 [ 1.939122] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.939138] usb 1-1.1: Product: TBS 5927 [ 1.939153] usb 1-1.1: Manufacturer: TBS-Tech [ 2.851930] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.315263] systemd[1]: System time before build time, advancing clock. [ 6.321853] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 6.322168] systemd[1]: Detected architecture arm. [ 6.325317] systemd[1]: Set hostname to . [ 6.327063] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 6.430563] random: systemd: uninitialized urandom read (16 bytes read) [ 6.430751] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.430941] random: systemd: uninitialized urandom read (16 bytes read) [ 6.431248] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.445215] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.445387] systemd[1]: Condition check resulted in Debug Shell on /dev/console being skipped. [ 6.445439] random: systemd: uninitialized urandom read (16 bytes read) [ 6.445818] systemd[1]: Listening on udev Kernel Socket. [ 6.459114] systemd[1]: Listening on RPCbind Server Activation Socket. [ 6.517756] kernel-overlays-setup: setup base modules [ 6.566935] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.57 [ 6.599173] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 6.599299] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 6.600016] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf [ 6.674280] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.57 [ 6.674429] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.dvb-latest.conf [ 6.742842] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.dvb-latest/lib/modules/4.19.57 [ 6.742935] kernel-overlays-setup: running depmod [ 8.368743] kernel-overlays-setup: done [ 8.512988] systemd-journald[214]: Received request to flush runtime journal from PID 1 [ 8.755599] random: crng init done [ 8.755607] random: 7 urandom warning(s) missed due to ratelimiting [ 9.469139] argon-mem feb00000.hevc-decoder: argon-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff [ 9.469493] argon-mem feb10000.argon-local-intc: argon-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff [ 9.471119] mc: loading out-of-tree module taints kernel. [ 9.471211] argon-mem feb20000.h264-decoder: argon-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff [ 9.471732] mc: Linux media interface: v0.10 [ 9.475501] argon-mem feb30000.vp9-decoder: argon-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff [ 9.475625] videodev: Linux video capture interface: v2.00 [ 9.475633] WARNING: You are using an experimental version of the media stack. [ 9.475633] As the driver is backported to an older kernel, it doesn't offer [ 9.475633] enough quality for its usage in production. [ 9.475633] Use it with care. [ 9.475633] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 9.475633] [ 9.484426] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 9.495251] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.500820] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 9.501040] bcm2835_codec: Unknown symbol vb2_core_expbuf_dmabuf (err -2) [ 9.523206] WARNING: You are using an experimental version of the media stack. [ 9.523206] As the driver is backported to an older kernel, it doesn't offer [ 9.523206] enough quality for its usage in production. [ 9.523206] Use it with care. [ 9.523206] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 9.523206] [ 9.524615] WARNING: You are using an experimental version of the media stack. [ 9.524615] As the driver is backported to an older kernel, it doesn't offer [ 9.524615] enough quality for its usage in production. [ 9.524615] Use it with care. [ 9.524615] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 9.524615] [ 9.545416] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.547119] dvb-usb: found a 'TBS 5927 DVB-S2 USB2.0' in cold state, will try to load a firmware [ 9.569759] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5927.fw' [ 9.569774] tbs5927: start downloading TBS5927 firmware [ 9.664488] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.690548] dvbdev: DVB: registering new adapter (CXD2880) [ 9.710701] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 9.712010] dvb-usb: found a 'TBS 5927 DVB-S2 USB2.0' in warm state. [ 9.712236] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 9.715416] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.715638] usbcore: registered new interface driver brcmfmac [ 9.720873] cxd2880: cxd2880_attach: CXD2880 driver version: Ver 1.4.1 - 1.0.5 [ 9.720887] cxd2880 spi0.0: DVB: registering adapter 0 frontend 0 (Sony CXD2880)... [ 9.721445] cxd2880_spi: cxd2880_spi_probe: Sony CXD2880 has successfully attached. [ 9.738049] dvbdev: DVB: registering new adapter (TBS 5927 DVB-S2 USB2.0) [ 9.738066] usb 1-1.1: media controller created [ 9.925942] dvb-usb: MAC address: 00:22:ab:c0:4e:00 [ 9.927115] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 9.943533] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.960453] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 9.960674] i2c i2c-3: STV091x Multistandard demod found at adr 68 on i2c-3 [ 9.960835] usb 1-1.1: DVB: registering adapter 1 frontend 0 (STV091x Multistandard)... [ 9.960858] dvbdev: dvb_create_media_entity: media entity 'STV091x Multistandard' registered. [ 10.004116] Registered IR keymap rc-tbs-nec [ 10.004216] rc rc0: TBS 5927 DVB-S2 USB2.0 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/rc/rc0 [ 10.004314] input: TBS 5927 DVB-S2 USB2.0 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/rc/rc0/input0 [ 10.008392] rc rc0: lirc_dev: driver dvb_usb_tbs5927 registered at minor = 0, scancode receiver, no transmitter [ 10.008401] dvb-usb: schedule remote query interval to 150 msecs. [ 10.008412] dvb-usb: TBS 5927 DVB-S2 USB2.0 successfully initialized and connected. [ 10.008541] usbcore: registered new interface driver tbs5927 [ 10.217984] uart-pl011 fe201000.serial: no DMA platform data [ 10.222156] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay) [ 10.222576] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.258012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.258026] brcmfmac: power management disabled [ 10.318249] input: eventlircd as /devices/virtual/input/input1 [ 10.476331] usb 1-1.1: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000) [ 10.625138] input: VNCServer Mouse as /devices/virtual/input/input2 [ 10.628112] input: VNCServer Keyboard as /devices/virtual/input/input3 [ 10.721548] cxd2880 spi0.0: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000) [ 11.225243] bcmgenet fd580000.genet eth0: Link is Down [ 13.746145] ------------[ cut here ]------------ [ 13.746160] WARNING: CPU: 3 PID: 390 at drivers/gpu/drm/vc4/vc4_firmware_kms.c:899 vc4_crtc_atomic_flush+0x98/0x9c [ 13.746165] Modules linked in: rc_tbs_nec(O) stv6120(O) stv091x(O) cxd2880(O) brcmfmac brcmutil cxd2880_spi(O) dvb_usb_tbs5927(O) dvb_usb(O) rc_core(O) cfg80211 dvb_core(O) videobuf2_vmalloc(O) rfkill videobuf2_dma_contig(O) bcm2835_mmal_vchiq(C) v4l2_mem2mem(O) videobuf2_memops(O) videobuf2_v4l2(O) bcm2835_gpiomem spi_bcm2835 videobuf2_common(O) videodev(O) mc(O) argon_mem fixed [ 13.746311] CPU: 3 PID: 390 Comm: kodi.bin Tainted: G C O 4.19.57 #1 [ 13.746314] Hardware name: BCM2835 [ 13.746318] Backtrace: [ 13.746329] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 13.746334] r7:ffffffff r6:00000000 r5:60000013 r4:c168fcec [ 13.746341] [] (show_stack) from [] (dump_stack+0xcc/0x110) [ 13.746348] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 13.746353] r10:c0d87e04 r9:d54f3100 r8:00000000 r7:00000383 r6:00000009 r5:00000000 [ 13.746356] r4:00000000 r3:79abb8e8 [ 13.746363] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 13.746367] r7:d5bb7280 r6:c0794204 r5:00000383 r4:c0d8fd8c [ 13.746373] [] (warn_slowpath_null) from [] (vc4_crtc_atomic_flush+0x98/0x9c) [ 13.746376] r6:d95bb440 r5:d95ba400 r4:d8ca1040 [ 13.746383] [] (vc4_crtc_atomic_flush) from [] (drm_atomic_helper_commit_planes+0x22c/0x2a0) [ 13.746386] r5:d4dc6040 r4:00000001 [ 13.746392] [] (drm_atomic_helper_commit_planes) from [] (vc4_atomic_complete_commit+0x60/0x314) [ 13.746397] r10:ffffe000 r9:d4dc6040 r8:00000000 r7:00000000 r6:d9788e40 r5:d95ba400 [ 13.746400] r4:d4dc6040 [ 13.746406] [] (vc4_atomic_complete_commit) from [] (vc4_atomic_commit+0xe8/0x178) [ 13.746410] r7:00000000 r6:d95ba400 r5:d9788fa8 r4:d4dc6040 [ 13.746417] [] (vc4_atomic_commit) from [] (drm_atomic_commit+0x54/0x60) [ 13.746422] r9:d4dc6040 r8:00000000 r7:00000001 r6:d95ba400 r5:d4dc6040 r4:00000000 [ 13.746428] [] (drm_atomic_commit) from [] (drm_mode_atomic_ioctl+0x928/0xb78) [ 13.746432] r7:00000001 r6:00000000 r5:d95bb840 r4:00000000 [ 13.746439] [] (drm_mode_atomic_ioctl) from [] (drm_ioctl_kernel+0xb8/0xf4) [ 13.746444] r10:d4c25e2c r9:c076df94 r8:00000012 r7:00000000 r6:d95ba400 r5:d6bcbb00 [ 13.746447] r4:c1604cc8 [ 13.746452] [] (drm_ioctl_kernel) from [] (drm_ioctl+0x2b0/0x3d4) [ 13.746457] r10:c0c51518 r9:00000038 r8:bee24710 r7:c03864bc r6:d6bcbb00 r5:d4d03a80 [ 13.746460] r4:c1604cc8 [ 13.746468] [] (drm_ioctl) from [] (do_vfs_ioctl+0xc0/0x7d4) [ 13.746473] r10:d8c801e0 r9:d4c24000 r8:bee24710 r7:00000019 r6:d4d03a80 r5:bee24710 [ 13.746476] r4:c1604cc8 [ 13.746482] [] (do_vfs_ioctl) from [] (ksys_ioctl+0x44/0x70) [ 13.746487] r10:00000036 r9:d4c24000 r8:bee24710 r7:c03864bc r6:00000019 r5:d4d03a80 [ 13.746490] r4:d4d03a81 [ 13.746496] [] (ksys_ioctl) from [] (sys_ioctl+0x18/0x1c) [ 13.746501] r9:d4c24000 r8:c02011c4 r7:00000036 r6:c03864bc r5:00000019 r4:00000019 [ 13.746508] [] (sys_ioctl) from [] (ret_fast_syscall+0x0/0x28) [ 13.746511] Exception stack(0xd4c25fa8 to 0xd4c25ff0) [ 13.746516] 5fa0: 00000019 00000019 00000019 c03864bc bee24710 00000000 [ 13.746521] 5fc0: 00000019 00000019 c03864bc 00000036 00000000 00000400 027bf1b8 027ce3a8 [ 13.746525] 5fe0: b5029100 bee246e4 b5021724 b4eabffc [ 13.746529] ---[ end trace 6aa5057dde96c478 ]--- [ 13.762680] ------------[ cut here ]------------ [ 13.762698] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xf0/0xf4 [ 13.762701] Modules linked in: rc_tbs_nec(O) stv6120(O) stv091x(O) cxd2880(O) brcmfmac brcmutil cxd2880_spi(O) dvb_usb_tbs5927(O) dvb_usb(O) rc_core(O) cfg80211 dvb_core(O) videobuf2_vmalloc(O) rfkill videobuf2_dma_contig(O) bcm2835_mmal_vchiq(C) v4l2_mem2mem(O) videobuf2_memops(O) videobuf2_v4l2(O) bcm2835_gpiomem spi_bcm2835 videobuf2_common(O) videodev(O) mc(O) argon_mem fixed [ 13.762792] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G WC O 4.19.57 #1 [ 13.762795] Hardware name: BCM2835 [ 13.762798] Backtrace: [ 13.762809] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 13.762815] r7:ffffffff r6:00000000 r5:60000193 r4:c168fcec [ 13.762822] [] (show_stack) from [] (dump_stack+0xcc/0x110) [ 13.762828] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 13.762834] r10:c1601df0 r9:00000000 r8:00000028 r7:00000402 r6:00000009 r5:00000000 [ 13.762837] r4:00000000 r3:79abb8e8 [ 13.762844] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 13.762848] r7:00000001 r6:c077a5f4 r5:00000402 r4:c0d8d308 [ 13.762854] [] (warn_slowpath_null) from [] (drm_vblank_put+0xf0/0xf4) [ 13.762858] r6:60000193 r5:d8ca1040 r4:d95ba528 [ 13.762864] [] (drm_vblank_put) from [] (drm_crtc_vblank_put+0x20/0x24) [ 13.762870] [] (drm_crtc_vblank_put) from [] (vc4_crtc_handle_page_flip+0x50/0x60) [ 13.762876] [] (vc4_crtc_handle_page_flip) from [] (vc4_crtc_irq_handler+0xc0/0x130) [ 13.762880] r7:00000001 r6:d9654500 r5:00000400 r4:d8c662c0 [ 13.762888] [] (vc4_crtc_irq_handler) from [] (__handle_irq_event_percpu+0x84/0x25c) [ 13.762891] r5:d9654568 r4:d8c678c0 [ 13.762898] [] (__handle_irq_event_percpu) from [] (handle_irq_event_percpu+0x3c/0x90) [ 13.762904] r10:c146cae8 r9:c1600000 r8:d9430800 r7:00000001 r6:d9654500 r5:d9654568 [ 13.762907] r4:c1604cc8 [ 13.762913] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x54/0x78) [ 13.762917] r6:00000000 r5:d9654568 r4:d9654500 [ 13.762924] [] (handle_irq_event) from [] (handle_fasteoi_irq+0xd4/0x18c) [ 13.762928] r7:00000001 r6:00000000 r5:c1605738 r4:d9654500 [ 13.762934] [] (handle_fasteoi_irq) from [] (generic_handle_irq+0x34/0x44) [ 13.762937] r5:00000000 r4:c146d304 [ 13.762944] [] (generic_handle_irq) from [] (__handle_domain_irq+0x6c/0xc4) [ 13.762951] [] (__handle_domain_irq) from [] (gic_handle_irq+0x4c/0x88) [ 13.762955] r9:c1600000 r8:ec815000 r7:c1601eb0 r6:ec814000 r5:ec81400c r4:c1605738 [ 13.762961] [] (gic_handle_irq) from [] (__irq_svc+0x5c/0x7c) [ 13.762964] Exception stack(0xc1601eb0 to 0xc1601ef8) [ 13.762969] 1ea0: c020a544 00000000 60000093 60000093 [ 13.762973] 1ec0: ffffe000 c1604cf8 c1604d38 00000001 00000000 00000000 c146cae8 c1601f0c [ 13.762977] 1ee0: c1600000 c1601f00 00000000 c020a548 60000013 ffffffff [ 13.762982] r9:c1600000 r8:00000000 r7:c1601ee4 r6:ffffffff r5:60000013 r4:c020a548 [ 13.762992] [] (arch_cpu_idle) from [] (default_idle_call+0x40/0x48) [ 13.762998] [] (default_idle_call) from [] (do_idle+0x24c/0x28c) [ 13.763003] [] (do_idle) from [] (cpu_startup_entry+0x28/0x30) [ 13.763008] r10:c1065a38 r9:c16bb800 r8:ffffffff r7:c16bb800 r6:00000000 r5:00000000 [ 13.763011] r4:000000c6 [ 13.763017] [] (cpu_startup_entry) from [] (rest_init+0xb8/0xbc) [ 13.763023] [] (rest_init) from [] (start_kernel+0x4a4/0x4d4) [ 13.763027] r5:00000000 r4:c16bb858 [ 13.763032] [] (start_kernel) from [<00000000>] ( (null)) [ 13.763036] ---[ end trace 6aa5057dde96c479 ]--- [ 14.268577] bcmgenet fd580000.genet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 14.268600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.272271] 8021q: 802.1Q VLAN Support v1.8 [ 15.826641] cxd2880: cxd2880_set_frontend: sys:3 freq:602000000 bw:8 [ 16.782590] Bluetooth: Core ver 2.22 [ 16.782628] NET: Registered protocol family 31 [ 16.782634] Bluetooth: HCI device and connection manager initialized [ 16.782645] Bluetooth: HCI socket layer initialized [ 16.782654] Bluetooth: L2CAP socket layer initialized [ 16.782677] Bluetooth: SCO socket layer initialized [ 16.784134] Bluetooth: HCI UART driver ver 2.3 [ 16.784142] Bluetooth: HCI UART protocol H4 registered [ 16.784216] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 16.784376] Bluetooth: HCI UART protocol Broadcom registered [ 16.852465] cxd2880: cxd2880_set_frontend: tune result 0