############################################## # LibreELEC # # http://libreelec.tv # ############################################## LibreELEC (community) Version: 7.0.2.5 LibreELEC:~ # dmesg [ 0.000000@0] Booting Linux on physical CPU 0x200 [ 0.000000@0] Linux version 3.10.99 (kszaq@CompileServer) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Sat Aug 20 02:00:26 [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC [ 0.000000@0] physical memory start address is 0x200000 [ 0.000000@0] reserved_end is bffffff [ 0.000000@0] [ 0.000000@0] Total memory is 1022 MiB [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0bffffff, size: 96 MiB [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB) [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB) [ 0.000000@0] deinterlace0(high) : 0x3df00000 - 0x40000000 ( 33 MiB) [ 0.000000@0] mesonstream0(high) : 0x3bf00000 - 0x3df00000 ( 32 MiB) [ 0.000000@0] vdec0(low) : 0x07a00000 - 0x0ba00000 ( 64 MiB) [ 0.000000@0] ppmgr0(high) : 0x39f00000 - 0x3bf00000 ( 32 MiB) [ 0.000000@0] amvideocap0(low) : 0x0ba00000 - 0x0c000000 ( 6 MiB) [ 0.000000@0] get storage device: storage 2 [ 0.000000@0] value=2 [ 0.000000@0] get_storage_device : get storage device: storage 2 [ 0.000000@0] get_storage_device : value=2 [ 0.000000@0] [get_storage_device] storage_flag=2 [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000@0] On node 0 totalpages: 208640 [ 0.000000@0] free_area_init_node: node 0, pgdat c07ef780, node_mem_map c0a1d000 [ 0.000000@0] Normal zone: 1520 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 166400 pages, LIFO batch:31 [ 0.000000@0] HighMem zone: 330 pages used for memmap [ 0.000000@0] HighMem zone: 42240 pages, LIFO batch:7 [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72) [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1166000 s7360 r8192 d13120 u32768 [ 0.000000@0] pcpu-alloc: s7360 r8192 d13120 u32768 alloc=8*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 207120 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=2 cvbsdrv=0 vdaccfg=0xo [ 0.000000@0] cvbs performance line = 0 [ 0.000000@0] cvbs trimming line = 0xa000 [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0 [ 0.000000@0] osd1:1 [ 0.000000@0] loaded:268435459 [ 0.000000@0] logo has been loaded [ 0.000000@0] 1080p:15 [ 0.000000@0] full:2 [ 0.000000@0] kernel get hdmimode form uboot is 1080p [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs [ 0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv [ 0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 64MB 16MB 735MB = 815MB total [ 0.000000@0] Memory: 813948k/813948k available, 20612k reserved, 168960K highmem [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000@0] .text : 0xc0008000 - 0xc076ba30 (7567 kB) [ 0.000000@0] .init : 0xc076c000 - 0xc0799cc0 ( 184 kB) [ 0.000000@0] .data : 0xc079a000 - 0xc07f05b8 ( 346 kB) [ 0.000000@0] .bss : 0xc07f05b8 - 0xc0a18e5c (2211 kB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] NR_IRQS:256 [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000@0] Global timer: MESON TIMER-F (c07b5080) initialized [ 0.000000@0] Switching to timer-based delay loop [ 0.000000@0] Console: colour dummy device 80x30 [ 0.000000@0] console [tty0] enabled [ 0.000000@0] meson_serial_console_setup [ 0.000000@0] console [ttyS0] enabled [ 0.375363@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.385632@0] pid_max: default: 32768 minimum: 301 [ 0.390688@0] Mount-cache hash table entries: 512 [ 0.396256@0] CPU: Testing write buffer coherency: ok [ 0.400574@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.405943@0] Setting up static identity map for 0xc057bdb8 - 0xc057be10 [ 0.412751@0] L310 cache controller enabled [ 0.416716@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B [ 0.424208@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000 [ 0.432311@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222 [ 0.490385@1] CPU1: Booted secondary processor [ 0.490406@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.510362@2] CPU2: Booted secondary processor [ 0.510385@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.530357@3] CPU3: Booted secondary processor [ 0.530382@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.530492@0] Brought up 4 CPUs [ 0.558690@0] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.564916@0] CPU: All CPU(s) started in SVC mode. [ 0.570487@0] devtmpfs: initialized [ 0.581464@0] clkrate [ xtal ] : 24000000 [ 0.581521@0] clkrate [ pll_sys ] : 792000000 [ 0.584365@0] clkrate [ pll_fixed ] : 2550000000 [ 0.589040@0] clkrate [ pll_vid ] : 366000000 [ 0.593473@0] clkrate [ pll_ddr ] : 0 [ 0.597181@0] clkrate [ a9_clk ] : 792000000 [ 0.601524@0] clkrate [ clk81 ] : 159375000 [ 0.606964@1] pinctrl core: initialized pinctrl subsystem [ 0.611786@1] regulator-dummy: no parameters [ 0.615728@1] NET: Registered protocol family 16 [ 0.624363@1] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.629701@1] VPU driver version: v02 [ 0.630711@1] load vpu_clk in dts: 182150000Hz(3) [ 0.635496@1] vpu_probe OK [ 0.645992@0] amlogic_gpio gpio: Probed amlogic GPIO driver [ 0.646964@0] register lm device lm-root [ 0.649996@0] register lm device lm1 [ 0.653602@0] register lm device lm0 [ 0.657350@0] Init pinux probe! [ 0.660874@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver [ 0.666224@0] -------early_init_dt_init:115---------- [ 0.670910@0] tv_init_module [ 0.673756@0] major number 254 for disp [ 0.677554@0] vout_register_server [ 0.680953@0] register tv module server ok [ 0.685186@0] aml_i2c version: 20140813 [ 0.689028@0] call aml_dvfs_init in [ 0.692366@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs [ 0.692385@0] [DVFS]dvfs table of vcck_dvfs is: [ 0.692395@0] [DVFS] freq, min_uV, max_uV [ 0.692404@0] [DVFS] 96000, 860000, 860000 [ 0.692413@0] [DVFS] 192000, 860000, 860000 [ 0.692422@0] [DVFS] 312000, 860000, 860000 [ 0.692431@0] [DVFS] 408000, 860000, 860000 [ 0.692440@0] [DVFS] 504000, 860000, 860000 [ 0.692449@0] [DVFS] 600000, 860000, 860000 [ 0.692458@0] [DVFS] 720000, 860000, 860000 [ 0.692467@0] [DVFS] 816000, 900000, 900000 [ 0.692477@0] [DVFS] 1008000, 920000, 920000 [ 0.692486@0] [DVFS] 1200000, 970000, 970000 [ 0.692495@0] [DVFS] 1320000, 1100000, 1100000 [ 0.692504@0] [DVFS] 1488000, 1100000, 1100000 [ 0.692513@0] [DVFS] 1536000, 1140000, 1140000 [ 0.692834@0] hdmitx: system: amhdmitx_init [ 0.696432@0] hdmitx: system: Ver: 2014May6 [ 0.700698@0] hdmitx: system: amhdmitx_probe [ 0.705516@0] hdmitx: system: gate/pwr cmd: 7 [ 0.709162@0] hdmitx: system: ALREADY init VIC = 16 [ 0.714029@0] hdmitx: system: gate/pwr cmd: 0 [ 0.718807@0] hdmitx: system: reset intr mask [ 0.740043@0] hdmitx: system: irq 1 [ 0.740472@0] hdmitx: system: gate/pwr cmd: 4 [ 0.796630@1] bio: create slab at 0 [ 0.798067@2] SCSI subsystem initialized [ 0.799782@2] usbcore: registered new interface driver usbfs [ 0.804928@2] usbcore: registered new interface driver hub [ 0.810377@2] usbcore: registered new device driver usb [ 0.816508@2] mode is 15,sync_duration_den=1,sync_duration_num=60 [ 0.821469@2] request vpu clk holdings: vencp 159375000Hz [ 0.826810@2] TV mode 1080p selected. [ 0.830462@2] already display in uboot [ 0.834169@2] vinfo mode is: 1080p [ 0.842273@2] call aml_pmu_probe_init in [ 0.842674@2] get property: use_pwm, value:0x00000001, dec: 1 [ 0.849153@2] get property: table_count, value:0x0000001d, dec: 29 [ 0.856881@2] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2 [ 0.864053@2] 0, 001c0000, 860000 [ 0.867505@2] 1, 001b0001, 870000 [ 0.870987@2] 2, 001a0002, 880000 [ 0.874432@2] 3, 00190003, 890000 [ 0.877895@2] 4, 00180004, 900000 [ 0.881370@2] 5, 00170005, 910000 [ 0.884822@2] 6, 00160006, 920000 [ 0.888285@2] 7, 00150007, 930000 [ 0.891759@2] 8, 00140008, 940000 [ 0.895213@2] 9, 00130009, 950000 [ 0.898676@2] 10, 0012000a, 960000 [ 0.902150@2] 11, 0011000b, 970000 [ 0.905603@2] 12, 0010000c, 980000 [ 0.909067@2] 13, 000f000d, 990000 [ 0.912540@2] 14, 000e000e, 1000000 [ 0.915994@2] 15, 000d000f, 1010000 [ 0.919457@2] 16, 000c0010, 1020000 [ 0.922930@2] 17, 000b0011, 1030000 [ 0.926384@2] 18, 000a0012, 1040000 [ 0.929848@2] 19, 00090013, 1050000 [ 0.933320@2] 20, 00080014, 1060000 [ 0.936775@2] 21, 00070015, 1070000 [ 0.940239@2] 22, 00060016, 1080000 [ 0.943711@2] 23, 00050017, 1090000 [ 0.947166@2] 24, 00040018, 1100000 [ 0.950368@0] hdmitx: system: gate/pwr cmd: 5 [ 0.950371@0] hdmitx: edid: edid ready [ 0.950374@0] hdmitx: system: gate/pwr cmd: 4 [ 0.963020@2] 25, 00030019, 1110000 [ 0.966475@2] 26, 0002001a, 1120000 [ 0.969938@2] 27, 0001001b, 1130000 [ 0.973410@2] 28, 0000001c, 1140000 [ 0.976922@2] get pin for pwm-------- [ 0.980519@2] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1 [ 0.981121@2] Advanced Linux Sound Architecture Driver Initialized. [ 0.988707@2] Switching to clocksource Timer-E [ 1.009269@2] NET: Registered protocol family 2 [ 1.010200@2] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 1.015575@2] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.022137@2] TCP: Hash tables configured (established 8192 bind 8192) [ 1.028518@2] TCP: reno registered [ 1.031859@2] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.037924@2] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.044724@2] NET: Registered protocol family 1 [ 1.049217@2] RPC: Registered named UNIX socket transport module. [ 1.054971@2] RPC: Registered udp transport module. [ 1.059796@2] RPC: Registered tcp transport module. [ 1.064661@2] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.071328@2] wifi_dev_probe [ 1.074086@2] wifi_dt : interrupt_pin=GPIOX_21 [ 1.078508@2] wifi_dt : irq_num=null [ 1.082070@2] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH [ 1.087159@2] wifi_dt : power_on_pin=GPIOAO_6 [ 1.091533@2] wifi_dt : power_on_pin2=GPIOX_11 [ 1.095914@2] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107 [ 1.104984@2] Unpacking initramfs... [ 1.161525@1] hdmitx: system: gate/pwr cmd: 5 [ 1.161585@1] hdmitx: edid: edid ready [ 1.164002@1] hdmitx: edid: check sum valid [ 1.168152@1] hdmitx: edid: check sum valid [ 1.172340@1] hdmitx: edid: blk0 raw data [ 1.176292@1] 00ffffffffffff0034a996a00101010100130103800000780adaffa3584aa229 [ 1.183477@1] 17494b00000001010101010101010101010101010101023a80d072382d40102c [ 1.190663@1] 4580ba882100001e023a801871382d40582c4500ba882100001e000000fc0050 [ 1.197851@1] 616e61736f6e69632d54560a000000fd00173d0f440f000a20202020202001e2 [ 1.205037@1] [ 1.206685@1] hdmitx: edid: blk1 raw data [ 1.210666@1] 02032572509f9014052013041203110216071506012309070167030c002000b8 [ 1.217853@1] 26e3050301011d80d0721c1620102c2580ba882100009e011d8018711c162058 [ 1.229259@2] Freeing initrd memory: 1816K (c4e09000 - c4fcf000) [ 1.231798@3] bounce pool size: 64 pages [ 1.225040@1] 2c2500ba882100009e011d00bc52d01e20b8285540ba882100001e011d007251 [ 1.243026@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.244948@3] NFS: Registering the id_resolver key type [ 1.244983@3] Key type id_resolver registered [ 1.244987@3] Key type id_legacy registered [ 1.246435@3] msgmni has been set to 1263 [ 1.248114@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.248122@3] io scheduler noop registered [ 1.248143@3] io scheduler fiops registered (default) [ 1.252467@3] loop: module loaded [ 1.254216@3] tun: Universal TUN/TAP device driver, 1.6 [ 1.254220@3] tun: (C) 1999-2004 Max Krasnyansky [ 1.254493@3] PPP generic driver version 2.4.2 [ 1.254855@3] NET: Registered protocol family 24 [ 1.255045@3] usbcore: registered new interface driver smsc95xx [ 1.255230@3] usbcore: registered new interface driver qf9700 [ 1.255377@3] usbcore: registered new interface driver sr9600 [ 1.255818@3] usbcore: registered new interface driver usb-storage [ 1.256108@3] mousedev: PS/2 mouse device common for all mice [ 1.256336@3] i2c /dev entries driver [ 1.257317@3] hidraw: raw HID events driver (C) Jiri Kosina [ 1.261258@3] usbcore: registered new interface driver usbhid [ 1.261261@3] usbhid: USB HID core driver [ 1.262126@3] zram: Created 1 device(s) ... [ 1.262148@3] vout_init_module [ 1.262212@3] start init vout module [ 1.262366@3] create vout attribute ok [ 1.262583@3] ge2d_init [ 1.262596@3] ge2d_dev major:247 [ 1.263023@3] ge2d start monitor [ 1.263086@3] osd_init [ 1.263090@2] ge2d workqueue monitor start [ 1.263144@3] osd_probe, vinfo:c05acffc [ 1.263564@3] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K [ 1.263569@3] osd_probe, mydef_var:c07da970, vinfo:c05acffc [ 1.263575@3] init fbdev bpp is :32 [ 1.263578@3] ---------------clear framebuffer0 memory [ 1.242098@1] d01e206e285500ba882100001e8c0ad090204031200c405500ba88210000181b [ 1.417265@1] [ 1.419304@2] hdmitx: edid: find IEEEOUT [ 1.421079@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K [ 1.421085@0] osd_probe, mydef_var:c07da970, vinfo:c05acffc [ 1.421087@0] don't find to display_size_default from mesonfb-dts [ 1.421090@0] init fbdev bpp is :24 [ 1.446047@2] hdmitx: video: get current mode: 1080p [ 1.450874@2] is_similar_hdmi_vic[326] vic_old=16,mode_new=15 [ 1.454260@0] osd probe ok [ 1.454512@0] enter aml_sysled_init [ 1.454611@0] enter aml_sysled_probe [ 1.454615@0] start read sedio dts [ 1.454619@0] sysled pdata->name:aml-setio [ 1.454625@0] sysled pdata->red_led_mode:0 [ 1.454628@0] sysled pdata->blue_led_mode:1 [ 1.454637@0] red_led_gpio is 1 [ 1.454643@0] blue_led_gpio is 1 [ 1.466314@0] DI: di_init [ 1.466360@0] DI: di_probe [ 1.467058@0] aml_wdt_driver_init,306 [ 1.467061@0] ** disable watchdog [ 1.467357@0] keys=========================================== [ 1.467362@0] keys_devno=f400000 [ 1.467708@0] securitykey: device aml_keys created [ 1.467727@0] amlkeys=0 [ 1.467864@0] platform_driver_register--aml_keys_driver-------------------- [ 1.468294@0] start uart_ao_ttyS0:(irq = 122) [ 1.468297@0] register uart_ao ok [ 1.468650@0] start uart_a_ttyS1:(irq = 58) [ 1.468653@0] register uart_a ok [ 1.469033@0] set uart_b pinmux use pinctrl subsystem [ 1.469037@0] P_AO_RTI_PIN_MUX_REG:78025061 [ 1.469060@0] start uart_b_ttyS2:(irq = 107) [ 1.469063@0] register uart_b ok [ 1.469427@0] start uart_d_ttyS4:(irq = 126) [ 1.469430@0] register uart_d ok [ 1.469670@0] dwc_otg: version 3.10a 12-MAY-2014 [ 1.469701@0] dwc_otg_driver_probe NOT match [ 1.469742@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000 [ 1.469758@0] USB (1) use clock source: XTAL input [ 1.490887@1] Core Release: 3.10a [ 1.490894@1] Setting default values for core params [ 1.490906@1] curmode: 1, host_only: 1 [ 1.511122@1] Using Buffer DMA mode [ 1.511129@1] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.511134@1] Working on port type = HOST [ 1.511222@1] dwc_otg lm1: DWC OTG Controller [ 1.511252@1] dwc_otg lm1: new USB bus registered, assigned bus number 1 [ 1.511286@1] dwc_otg lm1: irq 63, io mem 0x00000000 [ 1.511290@1] -------hcd->flags.d32 = 0 [ 1.511315@1] Init: Port Power? op_state=1 [ 1.511317@1] Init1: Power Port (0) [ 1.511439@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.511448@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.511455@1] usb usb1: Product: DWC OTG Controller [ 1.511461@1] usb usb1: Manufacturer: Linux 3.10.99 dwc_otg_hcd [ 1.511468@1] usb usb1: SerialNumber: lm1 [ 1.512271@1] hub 1-0:1.0: USB hub found [ 1.512291@1] hub 1-0:1.0: 1 port detected [ 1.512611@1] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000 [ 1.512626@1] USB (0) use clock source: XTAL input [ 1.533709@3] Core Release: 3.10a [ 1.533716@3] Setting default values for core params [ 1.533726@3] curmode: 1, host_only: 0 [ 1.593908@3] Using Buffer DMA mode [ 1.593915@3] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.593918@3] Working on port type = OTG [ 1.593922@3] Current port type: SLAVE [ 1.593984@3] dwc_otg lm0: DWC OTG Controller [ 1.594013@3] dwc_otg lm0: new USB bus registered, assigned bus number 2 [ 1.594044@3] dwc_otg lm0: irq 62, io mem 0x00000000 [ 1.594108@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.594117@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.594124@3] usb usb2: Product: DWC OTG Controller [ 1.594131@3] usb usb2: Manufacturer: Linux 3.10.99 dwc_otg_hcd [ 1.594137@3] usb usb2: SerialNumber: lm0 [ 1.594899@3] hub 2-0:1.0: USB hub found [ 1.594919@3] hub 2-0:1.0: 1 port detected [ 1.595187@3] Dedicated Tx FIFOs mode [ 1.595372@3] using timer detect id change, ef379c00 [ 1.595667@3] boot_device_flag : -1 [ 1.595670@3] do not init nand [ 1.595830@3] boot_device_flag : -1 [ 1.598625@3] amvideocap_init_module [ 1.598682@3] amvideocap_probe,amvideocap [ 1.598690@3] amvideocap_dev_register buf:0ba00000,size:600000. [ 1.599320@3] Amlogic A/V streaming port init [ 1.602329@3] buffersize=262144,0,start=0 [ 1.602343@3] Subtitle stbuf alloced at 0xee840000, size = 262144 [ 1.602347@3] changed the (2) buffer size from 0 to 262144 [ 1.602753@3] init vdec memsource 7a00000->b9fffff [ 1.603066@3] [tsync_pcr_init]init success. [ 1.603232@3] regist mpeg12 codec profile [ 1.603386@3] regist mpeg4 codec profile [ 1.603389@3] amvdec_vc1 module init [ 1.603534@3] regist vc1 codec profile [ 1.603536@3] amvdec_h264 module init [ 1.603722@3] regist h264 codec profile [ 1.603725@3] amvdec_h264mvc module init [ 1.603868@3] regist hmvc codec profile [ 1.603870@3] amvdec_h265 module init [ 1.604017@3] regist hevc codec profile [ 1.604163@3] regist mjpeg codec profile [ 1.604166@3] amvdec_real module init [ 1.604321@3] regist real codec profile [ 1.604324@3] amvdec_avs module init [ 1.604880@3] alloc_keep_buffer keep_y_addr ee200000 [ 1.604900@3] alloc_keep_buffer keep_u_addr ee900000 [ 1.604913@3] alloc_keep_buffer keep_v_addr ede00000 [ 1.604917@3] yaddr=ee200000,u_addr=ee900000,v_addr=ede00000 [ 1.605476@3] create_ge2d_work_queue video task ok [ 1.606228@3] efuse=========================================== [ 1.606598@3] efuse: device efuse created [ 1.606752@3] efuse-------------------------------------------- [ 1.606755@3] SARADC Driver init. [ 1.606979@3] __saradc_probe__ [ 1.611260@3] HOST mode [ 1.641223@3] -------hcd->flags.d32 = 0 [ 1.641251@3] Init: Port Power? op_state=1 [ 1.641254@3] Init1: Power Port (0) [ 1.641258@3] set usb port power on (board gpio 5)! [ 1.711281@3] Indeed it is in host mode hprt0 = 00021501 [ 1.751366@0] saradc calibration: ref_val = 507 [ 1.751369@0] saradc calibration: ref_nominal = 512 [ 1.751372@0] saradc calibration: coef = 4112 [ 1.751569@0] Remote Driver [ 1.751679@0] Remote platform_data g_remote_base=fe600580 [ 1.751728@0] set drvdata completed [ 1.751742@0] device_create_file completed [ 1.752414@0] input: aml_keypad as /devices/platform/meson-remote/input/input0 [ 1.752973@0] input_register_device completed [ 1.753037@0] [0xffffff00] = 0x1dd0190 [ 1.753041@0] [0xffffff04] = 0xf800ca [ 1.753044@0] [0xffffff08] = 0x82006e [ 1.753047@0] [0xffffff0c] = 0x3c0030 [ 1.753050@0] [0xffffff10] = 0x30fa0013 [ 1.753053@0] [0xffffff18] = 0x6f19000 [ 1.753056@0] [0xffffff1c] = 0xbe40 [ 1.753059@0] [0x0] = 0xfa00a0 [ 1.753062@0] [0x4] = 0xfa00a0 [ 1.753065@0] [0x8] = 0xfa00a0 [ 1.753067@0] [0xc] = 0x640030 [ 1.753070@0] [0x10] = 0x30fa0013 [ 1.753073@0] [0x18] = 0x961b800 [ 1.753076@0] [0x1c] = 0x9740 [ 1.753079@0] [0x20] = 0x104 [ 1.753081@0] [0x24] = 0x0 [ 1.753084@0] [0x28] = 0x0 [ 1.753088@0] set_remote_mode[69] [ 1.753119@0] remote config major:240 [ 1.753498@0] physical address:0x2eae2000 [ 1.753660@0] spi_nor_init [ 1.753897@0] amlogic_spi_nor_probe: [ 1.753907@0] amlogic_spi->state_name:default [ 1.754127@0] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated [ 1.754344@0] check_storage_device : spi boot_device_flag : -1 [ 1.754347@0] spi_nor_probe [ 1.754351@0] spi_nor_probe 629 boot_device_flag 2 : do not init spi [ 1.754365@0] spi_nor: probe of apollospi:32766 failed with error -12 [ 1.754371@0] amlogic_spi_nor_probe over [ 1.754604@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 1.754858@1] host->base fe108c20 [ 1.754905@1] pdata->caps 7 [ 1.754908@1] pdata->caps2 0 [ 1.754915@1] get property: port, value:0x00000001 [ 1.754920@1] get property: ocr_avail, value:0x00200000 [ 1.754924@1] get property: f_min, value:0x000493e0 [ 1.754928@1] get property: f_max, value:0x02faf080 [ 1.754933@1] get property: f_max_w, value:0x02faf080 [ 1.754937@1] get property: max_req_size, value:0x00020000 [ 1.754942@1] get property: irq_in, value:0x00000003 [ 1.754947@1] get property: irq_out, value:0x00000005 [ 1.754958@1] get property: gpio_cd, str:CARD_6 [ 1.754965@1] get property: pinname, str:sd [ 1.754971@1] get property: jtag_pin, str:CARD_0 [ 1.754976@1] get property: card_type, value:0x00000005 [ 1.754982@1] get property: gpio_dat3, str:CARD_4 [ 1.755005@1] normal card in [ 1.791276@1] reg:2620,clearmask=80008,setmask=10001 [ 1.791282@1] reg:2621,clearmask=ff000000,set pin=49 [ 1.791287@1] reg:2623,clearmask=7000,setmask=7 [ 1.791292@1] reg:2620,clearmask=200020,setmask=1 [ 1.791296@1] reg:2622,clearmask=ff00,set pin=49 [ 1.791300@1] reg:2623,clearmask=700000,setmask=7 [ 1.801347@3] pdata->caps 10f [ 1.801351@3] pdata->caps2 0 [ 1.801356@3] get property: port, value:0x00000000 [ 1.801361@3] get property: ocr_avail, value:0x00200000 [ 1.801365@3] get property: f_min, value:0x000493e0 [ 1.801369@3] get property: f_max, value:0x02faf080 [ 1.801374@3] get property: max_req_size, value:0x00020000 [ 1.801384@3] get property: pinname, str:sdio [ 1.801389@3] get property: card_type, value:0x00000003 [ 1.820006@3] sd: new high speed SDHC card at address 59b4, clock 39843750, 4-bit-bus-width [ 1.820498@3] mmcblk0: sd:59b4 USDU1 14.9 GiB [ 1.852018@0] mmcblk0: p1 p2 [ 1.891242@3] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.891518@3] Indeed it is in host mode hprt0 = 00001101 [ 2.092685@3] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 2.092694@3] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.092701@3] usb 1-1: Product: USB2.0 Hub [ 2.093685@3] hub 1-1:1.0: USB hub found [ 2.094024@3] hub 1-1:1.0: 4 ports detected [ 2.096362@3] Indeed it is in host mode hprt0 = 00021501 [ 2.271242@3] usb 2-1: new full-speed USB device number 2 using dwc_otg [ 2.271435@3] Indeed it is in host mode hprt0 = 00021501 [ 2.350326@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 2.357923@2] hdmitx: audio: audio channel num is 0 [ 2.361814@2] hdmitx: audio: SPDIF [ 2.365157@2] hdmitx: audio: current VIC: 16 [ 2.369390@2] hdmitx: audio: audio sample rate: 0 [ 2.371776@3] [aml_sdio_probe] aml_sdio_probe() success! [ 2.373218@0] host->base fe108e00 [ 2.373303@0] pdata->caps 80000547 [ 2.373312@0] pdata->caps2 20 [ 2.373319@0] get property: port, value:0x00000005 [ 2.373324@0] get property: ocr_avail, value:0x00200000 [ 2.373328@0] get property: f_min, value:0x000493e0 [ 2.373332@0] get property: f_max, value:0x05f5e100 [ 2.373338@0] get property: max_req_size, value:0x00020000 [ 2.373348@0] get property: pinname, str:emmc [ 2.373353@0] get property: card_type, value:0x00000001 [ 2.373362@0] get property: gpio_dat3, str:BOOT_3 [ 2.373368@0] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3 [ 2.411255@1] aml_emmc_hw_reset 1338 [ 2.419083@1] mmc_init_card [ 2.452368@2] hdmitx: audio: reset audio N para [ 2.456854@2] hdmitx: audio: PCM out to HDMI [ 2.473019@3] usb 2-1: New USB device found, idVendor=0471, idProduct=0815 [ 2.474293@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.477589@2] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL [ 2.477592@2] hdmitx: audio: i2s_to_spdif_flag:1 [ 2.477594@2] hdmitx: audio: Enable audio spdif to HDMI [ 2.477658@2] hdmi detect: plug. [ 2.481290@1] [aml_sdhc_probe] aml_sdhc_probe() success! [ 2.481557@1] [dsp]DSP start addr 0xc5e00000 [ 2.481596@1] [dsp]register dsp to char divece(257) [ 2.482501@1] amlogic audio spdif interface device init! [ 2.482599@1] device name=nand_key open error [ 2.482606@1] aml_keys: version 0 can not be init c07dee90 [ 2.482609@1] device name=emmc_key open error [ 2.482613@1] aml_keys: version 0 can not be init c07dee90 [ 2.483503@2] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0 [ 2.487739@2] amaudio2: device amaudio2 created [ 2.487984@2] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1 [ 2.488332@2] Error: Didn't get power valid value --- wifi_power_probe 323 [ 2.488343@2] wifi_power power_gpio is 6 [ 2.488350@2] wifi_power power_gpio2 is 108 [ 2.488907@2] amlogic rfkill init [ 2.488972@2] enter bt_probe of_node [ 2.488981@2] not get gpio_en [ 2.488983@2] not get gpio_wake [ 2.511487@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill [ 2.511494@2] clock_32k_pin(107) : (null) [ 2.511510@2] clock_32k_pin(107) : sdio_wifi [ 2.594977@3] usb 2-1: Product: eHome Infrared Transceiver [ 2.600387@3] usb 2-1: Manufacturer: Philips [ 2.604656@3] usb 2-1: SerialNumber: PH00WIar [ 2.620575@1] emmc: BKOPS_EN bit is not set [ 2.621334@1] Activate high speed [ 2.623908@1] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width [ 2.631408@2] mmcblk1: emmc:0001 NCard 7.21 GiB [ 2.635712@2] mmcblk1boot0: emmc:0001 NCard partition 1 4.00 MiB [ 2.641824@2] mmcblk1boot1: emmc:0001 NCard partition 2 4.00 MiB [ 2.648993@2] mmcblk1: p1 [ 2.650994@2] Delete invalid mbr partition part ee8b8400, part->partno 1 [ 2.657687@2] emmc read lba=0x12000, blocks=0x1 OK! [ 2.662285@2] emmc read lba=0x12001, blocks=0x1 OK! [ 2.666686@2] [mmc_read_partition_tbl] mmc read partition OK! [ 2.672414@2] add_emmc_partition [ 2.675916@2] [mmcblk1p01] bootloader offset 0x000000000000, size 0x000000400000 [ 2.681905@3] UMP: UMP device driver -6.95.1-551-g18f4b18 loaded [ 2.682361@3] aml_aes aml_aes: Aml AES [ 2.682982@3] aml_tdes aml_tdes: Aml TDES [ 2.684190@3] enter rt5616_modinit [ 2.684522@3] dummy_codec_platform_probe [ 2.684913@3] == ES8323 == es8323_modinit() [ 2.685656@3] enter aml_i2s_dai_probe [ 2.685662@3] i2s get no clk src setting in dts, use the default mpll 0 [ 2.685674@3] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000 [ 2.685949@3] enter aml_pcm_dai_probe [ 2.686135@3] [aml-spdif-dai]enter aml_dai_spdif_init [ 2.686143@3] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4 [ 2.686146@3] audio_set_958_clk, freq=4, [ 2.686155@3] IEC958 16bit [ 2.686161@3] hdmitx: audio: aout notify rate 48000 [ 2.686164@3] hdmitx: audio: aout notify size 16 [ 2.686168@3] hdmitx: audio: aout notify format CT_PCM [ 2.686174@3] hdmitx: audio: audio channel num is 1 [ 2.686182@3] hdmitx: audio: SPDIF [ 2.686194@3] hdmitx: audio: current VIC: 16 [ 2.686197@3] hdmitx: audio: audio sample rate: 3 [ 2.686199@3] hdmitx: audio: reset audio N para [ 2.686211@3] hdmitx: audio: PCM out to HDMI [ 2.686215@3] hdmitx: audio: i2s_to_spdif_flag:1 [ 2.686216@3] hdmitx: audio: Enable audio spdif to HDMI [ 2.686223@3] hdmitx: audio: Audio Type: PCM [ 2.686284@3] hdmitx: audio: set audio param [ 2.686366@3] [aml-spdif-dai]aml_spdif_probe [ 2.686638@3] test codec rt5616 [ 2.686643@3] test_codec_of_node, node rt5616 disable [ 2.686646@3] test codec rt5631 [ 2.686650@3] test_codec_of_node, node rt5631 disable [ 2.686653@3] test codec wm8960 [ 2.686656@3] test_codec_of_node, node wm8960 disable [ 2.686659@3] test codec dummy_codec [ 2.686664@3] using external codec, index = 4 [ 2.686667@3] using external dummy codec [ 2.686898@3] enter spdif_dit_probe [ 2.686901@3] aml_spdif_unmute [ 2.687171@3] codec_name = dummy_codec.0 [ 2.687543@3] enter aml_asoc_init [ 2.687580@3] p_aml_audio->hp_disable=1 [ 2.687585@3] falied to get spk event delay time paraments from dts file [ 2.687588@3] spk_event delay_time = 0 [ 2.688476@3] aml-i2s 0:playback preallocate_dma_buffer: area=f0701000, addr=2e300000, size=524288 [ 2.689205@3] aml-i2s 1:capture preallocate_dma_buffer: area=f0783000, addr=2ea20000, size=65536 [ 2.689241@3] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok [ 2.690241@0] aml-i2s 0:playback preallocate_dma_buffer: area=f07a4000, addr=2dc00000, size=524288 [ 2.690956@0] aml-i2s 1:capture preallocate_dma_buffer: area=f0826000, addr=2e9e0000, size=65536 [ 2.690990@0] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok [ 2.693064@1] -----ext_codec=1--- [ 2.693087@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0 [ 2.693482@3] TCP: cubic registered [ 2.694466@3] NET: Registered protocol family 10 [ 2.695205@3] NET: Registered protocol family 17 [ 2.695303@3] Key type dns_resolver registered [ 2.944281@2] [mmcblk1p02] reserved offset 0x000002400000, size 0x000004000000 [ 2.944594@2] [mmcblk1p03] cache offset 0x000006c00000, size 0x000020000000 [ 2.944877@2] [mmcblk1p04] env offset 0x000027400000, size 0x000000800000 [ 2.945163@2] [mmcblk1p05] logo offset 0x000028400000, size 0x000002000000 [ 2.945442@2] [mmcblk1p06] recovery offset 0x00002ac00000, size 0x000002000000 [ 2.945730@2] [mmcblk1p07] misc offset 0x00002d400000, size 0x000002000000 [ 2.946007@2] [mmcblk1p08] boot offset 0x00002fc00000, size 0x000002000000 [ 2.946289@2] [mmcblk1p09] system offset 0x000032400000, size 0x000040000000 [ 2.946568@2] [mmcblk1p10] data offset 0x000072c00000, size 0x00015b500000 [ 2.946600@2] card key: card_blk_probe. [ 2.946608@2] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220 [ 2.946613@2] i=0,register --- emmc_key [ 2.946617@2] emmc key: emmc_key_init:450 ok. [ 2.946748@2] Exit aml_emmc_partition_ops OK. [ 2.943856@3] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1 [ 3.050673@3] Registering SWP/SWPB emulation handler [ 3.055642@3] enter meson_pm_init [ 3.055708@2] mmcblk1boot1: p1 [ 3.055757@2] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated [ 3.068464@3] enter meson_pm_probe! [ 3.071745@3] meson_pm_probe done ! [ 3.071796@2] mmcblk1boot0: p1 [ 3.071825@2] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated [ 3.084544@3] AO cpu runs ok. [ 3.089024@1] regulator-dummy: disabling [ 3.091930@1] console [netcon0] enabled [ 3.095121@1] netconsole: network logging started [ 3.099893@1] AO cpu stop ok. [ 3.103119@1] AO cpu runs ok. [ 3.105898@1] aml_rtc rtc.0: setting system clock to 2016-10-12 06:39:13 UTC (1476254353) [ 3.113994@1] meson_cpufreq_probe:SYSPLL request to be fixed [ 3.119453@1] meson_cpufreq: no voltage_control prop [ 3.124423@1] voltage_control = 0 [ 3.128818@1] buf[0]=f5,buf[1]=af,err=4 [ 3.131505@1] adc=383,TS_C=21,flag=1 [ 3.135037@1] efuse_flag=a [ 3.137722@1] amlogic_thermal_probe, this chip is trimmed, use thermal [ 3.144232@1] amlogic-thermal aml_thermal: amlogic thermal probe start [ 3.150712@1] #thermal-cells=7 [ 3.153748@1] pdata->temp_trip_count=7 [ 3.157466@1] temperature=60000 on trip point=0 [ 3.161982@1] fixing high_freq=1536001 to 1536000 at trip point 0,level=0 [ 3.168719@1] fixing low_freq=1536001 to 1536000 at trip point 0,level=0 [ 3.175388@1] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511 [ 3.181803@1] cpu[0] core num==3 [ 3.184998@1] gpu[0] core num==2 [ 3.188202@1] temperature=65000 on trip point=1 [ 3.192711@1] fixing high_freq=1488001 to 1250000 at trip point 1,level=1 [ 3.199458@1] fixing low_freq=1488001 to 1250000 at trip point 1,level=1 [ 3.206126@1] gpu[1].gpu_high_freq=426,tmp_level[1].gpu_high_freq=426 [ 3.212540@1] cpu[1] core num==3 [ 3.215737@1] gpu[1] core num==2 [ 3.218940@1] temperature=70000 on trip point=2 [ 3.223450@1] fixing high_freq=1320001 to 1250000 at trip point 2,level=1 [ 3.230197@1] fixing low_freq=1320001 to 1250000 at trip point 2,level=1 [ 3.236865@1] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328 [ 3.243279@1] cpu[2] core num==2 [ 3.246475@1] gpu[2] core num==2 [ 3.249679@1] temperature=75000 on trip point=3 [ 3.254188@1] fixing high_freq=1200001 to 768000 at trip point 3,level=2 [ 3.260849@1] fixing low_freq=1200001 to 768000 at trip point 3,level=2 [ 3.267431@1] gpu[3].gpu_high_freq=328,tmp_level[3].gpu_high_freq=328 [ 3.273844@1] cpu[3] core num==2 [ 3.277041@1] gpu[3] core num==1 [ 3.280245@1] temperature=80000 on trip point=4 [ 3.284755@1] fixing high_freq=1008001 to 768000 at trip point 4,level=2 [ 3.291421@1] fixing low_freq=1008001 to 768000 at trip point 4,level=2 [ 3.297997@1] gpu[4].gpu_high_freq=328,tmp_level[4].gpu_high_freq=328 [ 3.304410@1] cpu[4] core num==2 [ 3.307607@1] gpu[4] core num==1 [ 3.310811@1] temperature=90000 on trip point=5 [ 3.315320@1] fixing high_freq=720001 to 384000 at trip point 5,level=3 [ 3.321900@1] fixing low_freq=720001 to 384000 at trip point 5,level=3 [ 3.328389@1] gpu[5].gpu_high_freq=251,tmp_level[5].gpu_high_freq=251 [ 3.334807@1] cpu[5] core num==1 [ 3.337999@1] gpu[5] core num==1 [ 3.341211@1] temperature=260000 on trip point=6 [ 3.345792@1] fixing high_freq=-1 to -22 at trip point 6,level=-1 [ 3.351860@1] fixing low_freq=-1 to -22 at trip point 6,level=-1 [ 3.357829@1] gpu[6].gpu_high_freq=-1,tmp_level[6].gpu_high_freq=-1 [ 3.364069@1] cpu[6] core num==-1 [ 3.367354@1] gpu[6] core num==-1 [ 3.370643@1] idle interval=1000 [ 3.373855@1] pdata->name:aml_thermal [ 3.377905@1] tmp_trip[0].cpu_core_upper=1 [ 3.381576@1] tmp_trip[1].cpu_core_upper=1 [ 3.385635@1] tmp_trip[2].cpu_core_upper=2 [ 3.389699@1] tmp_trip[3].cpu_core_upper=2 [ 3.393781@1] tmp_trip[4].cpu_core_upper=2 [ 3.397839@1] tmp_trip[5].cpu_core_upper=3 [ 3.401917@1] tmp_trip[6].cpu_core_upper=-1 [ 3.406065@1] aml_thermal bind thermal-cpucore-0 okay ! [ 3.411309@1] aml_thermal bind thermal-cpufreq-0 okay ! [ 3.416580@1] amlogic: Kernel Thermal management registered [ 3.422002@1] amlogic-thermal aml_thermal: amlogic thermal probe done [ 3.428562@1] ALSA device list: [ 3.431526@1] #0: AML-M8AUDIO [ 3.434917@1] Freeing unused kernel memory: 180K (c076c000 - c0799000) [ 3.470846@2] tvmode set to 1080p [ 3.470846@2] [ 3.470867@2] don't set the same mode as current. [ 3.555096@2] vfm_map_store:rm default [ 3.555096@2] [ 3.555383@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 3.555383@2] [ 3.637695@1] Console: switching to colour frame buffer device 240x67 [ 4.397473@0] force enable DISCARD here for ext4 fs [ 4.397489@0] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 4.398235@0] force enable DISCARD here for ext4 fs [ 4.398246@0] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 4.398940@0] force enable DISCARD here for ext4 fs [ 4.488018@1] checked enable EXT4 DISCARD here [ 4.488032@1] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard [ 4.488039@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.032437@2] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -U) [ 5.032640@2] systemd[1]: Detected architecture arm. [ 5.032834@2] systemd[1]: Running with unpopulated /etc. [ 5.032955@2] systemd[1]: Set hostname to . [ 5.034152@2] systemd[1]: Initializing machine ID from random generator. [ 5.087084@2] systemd[1]: Populated /etc with preset unit settings. [ 5.150867@2] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.151358@2] systemd[1]: Created slice System Slice. [ 5.151855@2] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.153092@2] systemd[1]: Starting Show Version... [ 5.153402@2] systemd[1]: Listening on udev Kernel Socket. [ 5.153749@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.153997@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.154116@2] systemd[1]: Reached target Paths. [ 5.154348@2] systemd[1]: Created slice User and Session Slice. [ 5.154439@2] systemd[1]: Reached target Slices. [ 5.154914@2] systemd[1]: Listening on udev Control Socket. [ 5.155121@2] systemd[1]: Listening on Journal Socket. [ 5.156645@2] systemd[1]: Mounting POSIX Message Queue File System... [ 5.158063@2] systemd[1]: Mounting Temporary Directory... [ 5.159577@2] systemd[1]: Starting Setup machine-id... [ 5.169653@2] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.171112@2] systemd[1]: Starting Mounting swapfile... [ 5.172838@2] systemd[1]: Mounting Debug File System... [ 5.174367@2] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.183343@0] systemd[1]: Starting Load Kernel Modules... [ 5.184526@0] systemd[1]: Mounting Variable Directory... [ 5.217490@1] systemd[1]: Started Remount Root and Kernel File Systems. [ 5.224008@1] systemd[1]: Starting udev Coldplug all Devices... [ 5.272796@1] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.274527@1] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.308441@2] systemd[1]: Mounted Debug File System. [ 5.308608@2] systemd[1]: Mounted POSIX Message Queue File System. [ 5.308707@2] systemd[1]: Mounted Variable Directory. [ 5.308801@2] systemd[1]: Mounted Temporary Directory. [ 5.319939@2] systemd[1]: Starting Setup Timezone data... [ 5.355167@2] systemd[1]: Started Show Version. [ 5.356979@2] systemd[1]: Started Setup machine-id. [ 5.388095@2] systemd[1]: Started Setup Timezone data. [ 5.409221@0] pdata->tmp_trip[0].gpu_lower_level=1 [ 5.409238@0] pdata->tmp_trip[0].gpu_upper_level=1 [ 5.409274@0] pdata->tmp_trip[1].gpu_lower_level=2 [ 5.409284@0] pdata->tmp_trip[1].gpu_upper_level=2 [ 5.409311@0] pdata->tmp_trip[2].gpu_lower_level=4 [ 5.409320@0] pdata->tmp_trip[2].gpu_upper_level=4 [ 5.409343@0] pdata->tmp_trip[3].gpu_lower_level=4 [ 5.409353@0] pdata->tmp_trip[3].gpu_upper_level=4 [ 5.409378@0] pdata->tmp_trip[4].gpu_lower_level=4 [ 5.409387@0] pdata->tmp_trip[4].gpu_upper_level=4 [ 5.409444@0] pdata->tmp_trip[5].gpu_lower_level=4 [ 5.409460@0] pdata->tmp_trip[5].gpu_upper_level=4 [ 5.409489@0] pdata->tmp_trip[6].gpu_lower_level=-1 [ 5.409500@0] pdata->tmp_trip[6].gpu_upper_level=-1 [ 5.409546@0] aml_thermal bind thermal-gpufreq-0 okay ! [ 5.409556@0] gpu cooling register okay with err=0 [ 5.409992@0] tmp_trip[0].gpu_core_upper=0 [ 5.410028@0] tmp_trip[1].gpu_core_upper=0 [ 5.410052@0] tmp_trip[2].gpu_core_upper=0 [ 5.410081@0] tmp_trip[3].gpu_core_upper=1 [ 5.410105@0] tmp_trip[4].gpu_core_upper=1 [ 5.410128@0] tmp_trip[5].gpu_core_upper=1 [ 5.410151@0] tmp_trip[6].gpu_core_upper=-1 [ 5.410176@0] aml_thermal bind thermal-gpucore-0 okay ! [ 5.410185@0] gpu core cooling register okay with err=0 [ 5.410399@0] Mali: Mali device driver loaded [ 5.411572@2] systemd[1]: Started Create Static Device Nodes in /dev. [ 5.412950@2] systemd[1]: Started Load Kernel Modules. [ 5.498346@2] systemd[1]: Started Mounting swapfile. [ 5.613036@2] systemd[1]: Started udev Coldplug all Devices. [ 5.660824@2] systemd[1]: Reached target Swap. [ 5.662050@2] systemd[1]: Starting Apply Kernel Variables... [ 5.662671@2] systemd[1]: Reached target Local File Systems (Pre). [ 5.662778@2] systemd[1]: Reached target Local File Systems. [ 5.664311@2] systemd[1]: Starting Journal Service... [ 5.675215@2] systemd[1]: Started Apply Kernel Variables. [ 5.769269@2] systemd[1]: Started Journal Service. [ 5.804544@1] systemd-journald[1693]: Received request to flush runtime journal from PID 1 [ 6.696747@0] Console: switching to colour dummy device 80x30 [ 6.739240@3] cur_mode = 0 [ 6.739259@3] [0x0] = 0x1dd0190 [ 6.739268@3] [0x4] = 0xf800ca [ 6.739273@3] [0x8] = 0x82006e [ 6.739281@3] [0xc] = 0x3c0030 [ 6.739286@3] [0x10] = 0x30fa0013 [ 6.739291@3] [0x18] = 0x6f19000 [ 6.739300@3] [0x1c] = 0x9f40 [ 6.739310@3] [0x20] = 0x0 [ 6.739315@3] [0x24] = 0x0 [ 6.739319@3] [0x28] = 0x0 [ 6.739324@3] set_remote_mode[69] [ 6.753548@0] wifi_setup_dt [ 6.753567@0] wifi_request_32k_clk : ON-->ON for sdio_wifi [ 6.753574@0] interrupt_pin(118) : (null) [ 6.753599@0] reg:2620,clearmask=100010,setmask=0 [ 6.753604@0] reg:2622,clearmask=ff,set pin=118 [ 6.753610@0] reg:2623,clearmask=70000,setmask=4 [ 6.753614@0] interrupt_pin(118) : sdio_wifi [ 6.753619@0] power_on_pin(6) : (null) [ 6.753630@0] power_on_pin(6) : sdio_wifi [ 6.753635@0] power_on_pin2(108) : (null) [ 6.753645@0] power_on_pin2(108) : sdio_wifi [ 6.850124@1] WARNING: You are using an experimental version of the media stack. [ 6.850124@1] As the driver is backported to an older kernel, it doesn't offer [ 6.850124@1] enough quality for its usage in production. [ 6.850124@1] Use it with care. [ 6.850124@1] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 6.850124@1] 009a620848218d521f008141c62f56bf19294dd9 [media] cec: always check all_device_types and features [ 6.850124@1] b7cbc892532316f2abd880186301e57239a17f28 [media] cec: poll should check if there is room in the te [ 6.850124@1] 83505028d859bcbb69691aabade9dc633e5b74ea [media] vivid: support monitor all mode [ 6.911274@1] Registered IR keymap rc-rc6-mce [ 6.925354@1] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/lm0/usb2/2-1/2-1:1.0/r1 [ 6.938689@1] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/lm0/usb2/2-1/2-1:1.0/0 [ 6.946599@0] pps_core: LinuxPPS API ver. 1 registered [ 6.946615@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 6.961686@0] PTP clock support registered [ 6.985352@1] lirc_dev: IR Remote Control driver registered, major 232 [ 6.994283@0] AO cpu stop ok. [ 6.994685@0] AO cpu runs ok. [ 7.034440@1] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [ 7.034456@1] IR LIRC bridge handler initialized [ 7.061262@1] WIFI Disable! 6 [ 7.123026@0] ethernet base addr is fe0c0000 [ 7.123057@0] name=emmc_key nand_key [ 7.123063@0] device name=nand_key open error [ 7.123069@0] aml_keys: version 0 can not be init c07dee90 [ 7.123073@0] name=emmc_key emmc_key [ 7.127809@1] emmc read lba=0x12020, blocks=0x100 OK! [ 7.128261@1] register_aes_algorithm:488,new way [ 7.128294@1] ret = -22 [ 7.128294@1] print_buff= [ 7.171303@3] mceusb 2-1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1 [ 7.171323@3] mceusb 2-1:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active) [ 7.172290@0] ret = 17 [ 7.172290@0] print_buff=C2:1D:14:53:18:36 [ 7.172361@0] DWMAC100 [ 7.172368@0] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 7.172372@0] Normal descriptors [ 7.172376@0] Ring mode enabled [ 7.172380@0] DMA HW capability register supported [ 7.172386@0] RX Checksum Offload Engine supported (type 2) [ 7.172390@0] TX Checksum insertion supported [ 7.172394@0] Wake-Up On Lan supported [ 7.172428@0] Enable RX Mitigation via HW Watchdog Timer [ 7.173364@3] usbcore: registered new interface driver mceusb [ 7.199355@3] libphy: stmmac: probed [ 7.199377@3] eth0: PHY ID 02430c54 at 0 IRQ POLL (stmmac-0:00) active [ 7.210599@0] IR NEC protocol handler initialized [ 7.261416@0] IR RC6 protocol handler initialized [ 7.852460@2] eth0: device MAC address c2:1d:14:53:18:36 [ 7.876908@2] 8021q: 802.1Q VLAN Support v1.8 [ 9.077937@1] Triggered SDIO WiFi power on and bus rescan. [ 9.077983@1] WIFI Enable! 6 [ 9.951791@2] libphy: stmmac-0:00 - Link is Up - 100/Full [ 9.951991@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.421476@2] [aml_sdio_timeout] time_start_cnt:993 [ 10.421476@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_i7 [ 10.421476@2] [ 11.421529@2] [aml_sdio_timeout] time_start_cnt:999 [ 11.421529@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->7 [ 11.421823@3] [ 12.421642@3] [aml_sdio_timeout] time_start_cnt:995 [ 12.421642@3] <4>[ 12.439598@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 12.442530@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 12.445387@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 12.450018@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 12.645105@2] sdio: new high speed SDIO card at address 0001, clock 39843750, 4-bit-bus-width [ 12.720617@0] [sdio_reinit] finish [ 12.422019@3] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is7 [ 12.422019@3] [ 12.773728@3] cfg80211: Calling CRDA to update world regulatory domain [ 12.774115@3] cfg80211: World regulatory domain updated: [ 12.774133@3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.774146@3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) [ 12.774159@3] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 12.774176@3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 12.774193@3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 12.774219@3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 12.774227@3] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) [ 12.774233@3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 12.774239@3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 12.842394@2] dhd_module_init: in [ 12.842411@2] wifi_setup_dt [ 12.842418@2] wifi_request_32k_clk : ON-->ON for sdio_wifi [ 12.842426@2] interrupt_pin(118) : sdio_wifi [ 12.842434@2] sdio_wifi is using the pin GPIOX_21 [ 12.842440@2] wifi_dt : gpio op failed(-16) at line 210 [ 12.842456@2] reg:2620,clearmask=100010,setmask=0 [ 12.842463@2] reg:2622,clearmask=ff,set pin=118 [ 12.842469@2] reg:2623,clearmask=70000,setmask=4 [ 12.842475@2] interrupt_pin(118) : sdio_wifi [ 12.842481@2] power_on_pin(6) : sdio_wifi [ 12.842486@2] sdio_wifi is using the pin GPIOAO_6 [ 12.842496@2] wifi_dt : gpio op failed(-16) at line 232 [ 12.842535@2] power_on_pin(6) : sdio_wifi [ 12.842543@2] power_on_pin2(108) : sdio_wifi [ 12.842552@2] sdio_wifi is using the pin GPIOX_11 [ 12.842559@2] wifi_dt : gpio op failed(-16) at line 244 [ 12.842566@2] power_on_pin2(108) : sdio_wifi [ 12.842578@2] ======== bcm_wlan_set_plat_data ======== [ 12.842584@2] host_oob_irq: 100 [ 12.842589@2] host_oob_irq_flags=1044 [ 12.842595@2] dhd_wifi_platform_load: Enter [ 12.842620@2] Power-up adapter 'DHD generic adapter' [ 12.842626@2] wifi_platform_set_power = 1 [ 12.842631@2] ======== PULL WL_REG_ON HIGH! ======== [ 12.842639@2] WIFI Disable! 6 [ 13.043053@2] WIFI Enable! 6 [ 13.551249@2] wifi_platform_bus_enumerate device present 1 [ 13.551263@2] ======== Card detection to detect SDIO card! ======== [ 13.551269@2] sdio_reset_comm(): [ 13.572000@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 13.573792@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 13.575577@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 13.578801@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.591591@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.596557@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.601537@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.606503@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.611826@1] [aml_sdio_irq_thread] Warning: xfer_step=13 [sdio_reinit] finish [ 13.795930@3] bcmsdh_register: register client driver [ 13.810284@0] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 13.814230@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 13.814463@3] bus num (host idx)=1, slot num (rca)=1 [ 13.814712@3] found adapter info 'DHD generic adapter' [ 13.825551@3] dhdsdio_probe : no mutex held. set lock [ 13.851174@3] F1 signature read @0x18000000=0x1540a9a6 [ 13.914947@2] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 13.916043@2] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 13.916214@2] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0 [ 13.916263@2] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/brcm/config.txt [ 13.918981@0] dhd_conf_read_nv_by_chip: nv_by_chip_count=4 [ 13.918997@0] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 13.919003@0] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 13.919010@0] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 13.919021@0] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 13.919189@0] dhd_conf_read_config: bcn_timeout = 20 [ 13.919228@0] dhd_conf_read_config: kso_enable = 0 [ 13.919343@0] dhd_conf_read_config: PM = 0 [ 13.920067@0] wl_create_event_handler(): thread:wl_event_handler:860 started [ 13.920209@0] tsk Enter, tsk = 0xed12147c [ 13.920350@3] dhd_attach(): thread:dhd_watchdog_thread:862 started [ 13.920427@0] dhd_attach(): thread:dhd_dpc:863 started [ 13.920441@3] dhd_dpc_thread: set dpc_cpucore 0 from config.txt [ 13.920482@0] dhd_attach(): thread:dhd_rxf:864 started [ 13.920497@0] dhd_deferred_work_init: work queue initialized [ 13.925287@0] dhdsdio_probe_init: set use_rxchain 0 from config.txt [ 13.946493@2] Dongle Host Driver, version 1.201.59.5 (r506368) [ 13.946493@2] Compiled in drivers/net/wireless/bcmdhd [ 13.947707@2] Register interface [wlan0] MAC: 04:e6:76:82:c4:d5 [ 13.947707@2] [ 13.947736@2] dhd_prot_ioctl : bus is down. we have nothing to do [ 13.948999@0] dhd_open: Enter ef215000 [ 13.949018@0] dhd_open : dhd_open: call dev open before insmod complete! [ 13.955112@2] bcmsdh_oob_intr_unregister: Enter [ 13.955142@2] bcmsdh_oob_intr_unregister: irq is not registered [ 13.955162@2] dhd_txglom_enable: enable 0 [ 13.955171@2] dhd_bus_devreset: WLAN OFF DONE [ 13.955281@2] wifi_platform_set_power = 0 [ 13.955293@2] ======== PULL WL_REG_ON LOW! ======== [ 13.955314@2] dhdsdio_probe : the lock is released. [ 13.955331@1] [ 13.955331@1] Dongle Host Driver, version 1.201.59.5 (r506368) [ 13.955331@1] Compiled in drivers/net/wireless/bcmdhd [ 13.955365@1] wl_android_wifi_on in 1 [ 13.955376@1] wl_android_wifi_on in 2: g_wifi_on=0 [ 13.955386@1] wifi_platform_set_power = 1 [ 13.955394@1] ======== PULL WL_REG_ON HIGH! ======== [ 13.955410@1] WIFI Disable! 6 [ 13.955591@2] dhd_module_init: Exit err=0 [ 14.041395@2] Changing uart_b_ttyS2: baud from 0 to 115200 [ 14.081238@2] Changing uart_b_ttyS2: baud from 115200 to 3000000 [ 14.084938@0] IEC958 16bit [ 14.084954@0] hdmitx: audio: aout notify rate 48000 [ 14.084960@0] hdmitx: audio: aout notify size 16 [ 14.084964@0] hdmitx: audio: no update [ 14.084971@0] aml_i2s_close device type 8 [ 14.111419@0] IEC958 16bit [ 14.111435@0] hdmitx: audio: aout notify rate 48000 [ 14.111441@0] hdmitx: audio: aout notify size 16 [ 14.111445@0] hdmitx: audio: no update [ 14.111451@0] aml_i2s_close device type 8 [ 14.113612@0] IEC958 16bit [ 14.113625@0] hdmitx: audio: aout notify rate 48000 [ 14.113630@0] hdmitx: audio: aout notify size 16 [ 14.113634@0] hdmitx: audio: no update [ 14.113641@0] aml_i2s_close device type 8 [ 14.114787@0] IEC958 16bit [ 14.114801@0] hdmitx: audio: aout notify rate 48000 [ 14.114806@0] hdmitx: audio: aout notify size 16 [ 14.114810@0] hdmitx: audio: no update [ 14.114816@0] aml_i2s_close device type 8 [ 14.116881@0] IEC958 16bit [ 14.116894@0] hdmitx: audio: aout notify rate 48000 [ 14.116900@0] hdmitx: audio: aout notify size 16 [ 14.116904@0] hdmitx: audio: no update [ 14.116910@0] aml_i2s_close device type 8 [ 14.119030@0] IEC958 16bit [ 14.119041@0] hdmitx: audio: aout notify rate 48000 [ 14.119046@0] hdmitx: audio: aout notify size 16 [ 14.119051@0] hdmitx: audio: no update [ 14.119057@0] aml_i2s_close device type 8 [ 14.119932@0] IEC958 16bit [ 14.119944@0] hdmitx: audio: aout notify rate 48000 [ 14.119949@0] hdmitx: audio: aout notify size 16 [ 14.119954@0] hdmitx: audio: no update [ 14.119960@0] aml_i2s_close device type 8 [ 14.121859@0] IEC958 16bit [ 14.121872@0] hdmitx: audio: aout notify rate 48000 [ 14.121879@0] hdmitx: audio: aout notify size 16 [ 14.121883@0] hdmitx: audio: no update [ 14.121890@0] aml_i2s_close device type 2 [ 14.162825@3] WIFI Enable! 6 [ 14.432383@2] buf=0 [ 14.432395@2] IEC958_mode_raw=0 [ 14.432433@2] IEC958_mode_codec= 0,IEC958 type 2 CH PCM [ 14.432440@2] last mode 0,now 0 [ 14.438843@2] IEC958 16bit [ 14.438858@2] hdmitx: audio: aout notify rate 48000 [ 14.438863@2] hdmitx: audio: aout notify size 16 [ 14.438867@2] hdmitx: audio: no update [ 14.438873@2] aml_i2s_close device type 8 [ 14.441110@2] IEC958 16bit [ 14.441122@2] hdmitx: audio: aout notify rate 48000 [ 14.441127@2] hdmitx: audio: aout notify size 16 [ 14.441132@2] hdmitx: audio: no update [ 14.441139@2] aml_i2s_close device type 8 [ 14.443387@2] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2 [ 14.443571@2] [aml-i2s-dai]enterd aml_dai_i2s_prepare,old_samplerate:48000,sample_rate=44100 [ 14.443587@2] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2 [ 14.443593@2] ----aml_hw_iec958_init,runtime->rate=44100-- [ 14.443600@2] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5 [ 14.443605@2] audio_set_958_clk, freq=5, [ 14.443611@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 14.443617@2] iec958 mode PCM16 [ 14.443623@2] IEC958 16bit [ 14.443629@2] hdmitx: audio: aout notify rate 44100 [ 14.443634@2] hdmitx: audio: aout notify size 16 [ 14.443642@2] hdmitx: audio: audio channel num is 1 [ 14.443649@2] hdmitx: audio: SPDIF [ 14.443661@2] hdmitx: audio: current VIC: 16 [ 14.443665@2] hdmitx: audio: audio sample rate: 2 [ 14.443669@2] hdmitx: audio: reset audio N para [ 14.443680@2] hdmitx: audio: PCM out to HDMI [ 14.443685@2] hdmitx: audio: i2s_to_spdif_flag:1 [ 14.443689@2] hdmitx: audio: Enable audio spdif to HDMI [ 14.443696@2] hdmitx: audio: Audio Type: PCM [ 14.443739@2] hdmitx: audio: set audio param [ 14.443744@2] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000 [ 14.443828@2] speaker_events--mute =1 [ 14.451659@1] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2 [ 14.451669@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 14.451676@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 14.451681@1] iec958 mode PCM16 [ 14.451692@1] IEC958 16bit [ 14.451698@1] hdmitx: audio: aout notify rate 44100 [ 14.451703@1] hdmitx: audio: aout notify size 16 [ 14.451707@1] hdmitx: audio: no update [ 14.451712@1] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000 [ 14.459879@1] [aml-i2s-dai]aiu i2s playback enable [ 14.459879@1] [ 14.459898@1] [aml-i2s-dai]audio_hw_958_enable 1 [ 14.671279@3] sdio_reset_comm(): [ 14.693786@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 14.695798@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 14.844585@0] [ 14.844585@0] [ 14.844585@0] dhd_bus_devreset: == WLAN ON == [ 14.845991@0] F1 signature read @0x18000000=0x1540a9a6 [ 14.878625@0] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 14.894822@0] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 14.898727@0] dhdsdio_probe_init: set use_rxchain 0 from config.txt [ 14.902760@0] dhd_conf_read_nv_by_chip: nv_by_chip_count=4 [ 14.902906@0] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 14.903009@0] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 14.903107@0] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 14.903202@0] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 14.906195@0] dhd_conf_read_config: bcn_timeout = 20 [ 14.906826@0] dhd_conf_read_config: kso_enable = 0 [ 14.908639@0] dhd_conf_read_config: PM = 0 [ 14.908965@0] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43438a0.bin [ 14.909051@0] dhd_conf_set_nv_name_by_chip: nvram_path=/lib/firmware/brcm/nvram_ap6212.txt [ 14.909124@0] Final fw_path=/lib/firmware/brcm/fw_bcm43438a0.bin [ 14.909190@0] Final nv_path=/lib/firmware/brcm/nvram_ap6212.txt [ 14.909255@0] Final conf_path=/lib/firmware/brcm/config.txt [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 13.616796@2] [aml_sdio_irq_thread] Warning: xfer_step=13 [ 15.028737@2] NVRAM version: AP6212_NVRAM_V1.0_20140603 [ 15.029354@2] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 15.151986@0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 15.166579@3] bcmsdh_oob_intr_register: Enter [ 15.166631@3] bcmsdh_oob_intr_register: HW_OOB enabled [ 15.166653@3] bcmsdh_oob_intr_register OOB irq=100 flags=414 [ 15.166729@3] bcmsdh_oob_intr_register: enable_irq_wake [ 15.166753@3] bcmsdh_oob_intr_register: enable_irq_wake failed with -6 [ 15.171412@1] dhd_conf_set_band: Set band 0 [ 15.172038@1] dhd_preinit_ioctls: Set tcpack_sup_mode 0 [ 15.177266@3] Firmware up: op_mode=0x0005, MAC=04:e6:76:82:c4:d5 [ 15.177312@3] dhd_conf_set_country: Set country ALL, revision 38 [ 15.178401@1] dhd_conf_set_country: country code setting failed -2 [ 15.180619@3] Country code: US (US/0) [ 15.181661@1] dhd_conf_set_roam: Set roam_off 1 [ 15.201471@1] Firmware version = wl0: Jul 18 2014 18:24:48 version 7.10.226.54.x2 (A0 Station) FWID 01-2faae407 [ 15.201514@1] Driver: 1.201.59.5 (r506368) [ 15.201514@1] Firmware: wl0: Jul 18 2014 18:24:48 version 7.10.226.54.x2 (A0 Station) FWID 01-2faae407 [ 15.201549@1] dhd_txglom_enable: enable 0 [ 15.201567@1] dhd_conf_set_disable_proptx: set disable_proptx 0 [ 15.203806@3] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64 [ 15.204684@3] wl_android_wifi_on: Success [ 15.276877@3] dhd_open: Exit ret=0 [ 16.097981@3] hdmitx: cec: Set PWM_E out put RTC 32K! [ 16.097997@3] hdmitx: cec: enable:int mask:0x6 [ 16.098858@3] hdmitx: cec: enable:int mask:0x6 [ 16.541451@0] [amlogic] ##### cec write error! ##### [ 16.719144@0] [amlogic] ##### cec write error! ##### [ 17.251963@3] hdmitx: cec: rx msg num:0x01 [ 18.158773@1] [amlogic] ##### cec write error! ##### [ 18.337185@0] [amlogic] ##### cec write error! ##### [ 18.514899@0] [amlogic] ##### cec write error! ##### [ 18.691948@1] [amlogic] ##### cec write error! ##### [ 18.876044@0] [amlogic] ##### cec write error! ##### [ 19.053792@0] [amlogic] ##### cec write error! ##### [ 19.231581@0] [amlogic] ##### cec write error! ##### [ 19.375630@1] AO cpu stop ok. [ 19.376029@1] AO cpu runs ok. [ 19.376310@1] AO cpu stop ok. [ 19.376690@1] AO cpu runs ok. [ 19.408554@1] [amlogic] ##### cec write error! ##### [ 19.586958@0] [amlogic] ##### cec write error! ##### [ 19.764682@0] [amlogic] ##### cec write error! ##### [ 19.942442@0] [amlogic] ##### cec write error! ##### [ 20.120149@0] [amlogic] ##### cec write error! ##### [ 20.297886@0] [amlogic] ##### cec write error! ##### [ 20.475613@0] [amlogic] ##### cec write error! ##### [ 20.653336@0] [amlogic] ##### cec write error! ##### [ 20.831104@0] [amlogic] ##### cec write error! ##### [ 21.008907@0] [amlogic] ##### cec write error! ##### [ 21.186528@0] [amlogic] ##### cec write error! ##### [ 21.364243@0] [amlogic] ##### cec write error! ##### [ 21.541983@0] [amlogic] ##### cec write error! ##### [ 21.720159@0] [amlogic] ##### cec write error! ##### [ 21.897435@0] [amlogic] ##### cec write error! ##### [ 22.075255@0] [amlogic] ##### cec write error! ##### [ 22.252856@0] [amlogic] ##### cec write error! ##### [ 22.430842@0] [amlogic] ##### cec write error! ##### [ 22.608309@0] [amlogic] ##### cec write error! ##### [ 74.651422@1] [aml-i2s-dai]aiu i2s playback disable [ 74.651422@1] [ 74.651578@1] [aml-i2s-dai]audio_hw_958_enable 0 [ 74.652012@1] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2 [ 74.652111@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 74.652194@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 74.652271@1] iec958 mode PCM16 [ 74.652345@1] IEC958 16bit [ 74.652422@1] hdmitx: audio: aout notify rate 44100 [ 74.652487@1] hdmitx: audio: aout notify size 16 [ 74.652547@1] hdmitx: audio: no update [ 74.652623@1] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000 [ 84.653874@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4 [ 84.653885@1] audio_set_958_clk, freq=4, [ 84.653895@1] IEC958 16bit [ 84.653902@1] hdmitx: audio: aout notify rate 48000 [ 84.653907@1] hdmitx: audio: aout notify size 16 [ 84.653913@1] hdmitx: audio: audio channel num is 1 [ 84.653921@1] hdmitx: audio: SPDIF [ 84.653932@1] hdmitx: audio: current VIC: 16 [ 84.653936@1] hdmitx: audio: audio sample rate: 3 [ 84.653941@1] hdmitx: audio: reset audio N para [ 84.653952@1] hdmitx: audio: PCM out to HDMI [ 84.653957@1] hdmitx: audio: i2s_to_spdif_flag:1 [ 84.653960@1] hdmitx: audio: Enable audio spdif to HDMI [ 84.653967@1] hdmitx: audio: Audio Type: PCM [ 84.654009@1] hdmitx: audio: set audio param [ 84.654016@1] aml_i2s_close device type 8 [ 89.661351@1] speaker_events--mute =0 [ 112.911520@0] remote_send_key [ 112.911678@0] press ircode = 0x27, scancode = 0x006a, maptable = 0 [ 112.911723@0] remote_send_key sleep:0 [ 112.939360@2] buf=0 [ 112.939484@2] IEC958_mode_raw=0 [ 112.940001@2] IEC958_mode_codec= 0,IEC958 type 2 CH PCM [ 112.940096@2] last mode 0,now 0 [ 113.024942@2] IEC958 16bit [ 113.024960@2] hdmitx: audio: aout notify rate 48000 [ 113.024965@2] hdmitx: audio: aout notify size 16 [ 113.024970@2] hdmitx: audio: no update [ 113.024976@2] aml_i2s_close device type 8 [ 113.028657@2] IEC958 16bit [ 113.028685@2] hdmitx: audio: aout notify rate 48000 [ 113.028691@2] hdmitx: audio: aout notify size 16 [ 113.028696@2] hdmitx: audio: no update [ 113.028705@2] aml_i2s_close device type 8 [ 113.031894@2] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2 [ 113.031975@2] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2 [ 113.031984@2] ----aml_hw_iec958_init,runtime->rate=44100-- [ 113.031994@2] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5 [ 113.031999@2] audio_set_958_clk, freq=5, [ 113.032007@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 113.032014@2] iec958 mode PCM16 [ 113.032023@2] IEC958 16bit [ 113.032031@2] hdmitx: audio: aout notify rate 44100 [ 113.032037@2] hdmitx: audio: aout notify size 16 [ 113.032047@2] hdmitx: audio: audio channel num is 1 [ 113.032060@2] hdmitx: audio: SPDIF [ 113.032075@2] hdmitx: audio: current VIC: 16 [ 113.032084@2] hdmitx: audio: audio sample rate: 2 [ 113.032090@2] hdmitx: audio: reset audio N para [ 113.032103@2] hdmitx: audio: PCM out to HDMI [ 113.032108@2] hdmitx: audio: i2s_to_spdif_flag:1 [ 113.032112@2] hdmitx: audio: Enable audio spdif to HDMI [ 113.032120@2] hdmitx: audio: Audio Type: PCM [ 113.032170@2] hdmitx: audio: set audio param [ 113.032183@2] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000 [ 113.032338@2] speaker_events--mute =1 [ 113.041558@1] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2 [ 113.041562@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 113.041566@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 113.041569@1] iec958 mode PCM16 [ 113.041573@1] IEC958 16bit [ 113.041577@1] hdmitx: audio: aout notify rate 44100 [ 113.041579@1] hdmitx: audio: aout notify size 16 [ 113.041581@1] hdmitx: audio: no update [ 113.041583@1] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000 [ 113.045861@1] [aml-i2s-dai]aiu i2s playback enable [ 113.045861@1] [ 113.045864@1] [aml-i2s-dai]audio_hw_958_enable 1 [ 113.202946@0] remote_send_key [ 113.202970@0] release ircode = 0x27, scancode = 0x006a, maptable = 0 [ 113.202975@0] remote_send_key sleep:0 [ 113.202978@0] remote_send_key [ 113.202987@0] press ircode = 0x27, scancode = 0x006a, maptable = 0 [ 113.202990@0] remote_send_key sleep:0 [ 113.581214@3] remote_send_key [ 113.581244@3] release ircode = 0x27, scancode = 0x006a, maptable = 0 [ 113.581248@3] remote_send_key sleep:0 [ 114.388305@0] remote_send_key [ 114.388365@0] press ircode = 0x28, scancode = 0x006c, maptable = 0 [ 114.388387@0] remote_send_key sleep:0 [ 114.741233@3] remote_send_key [ 114.741306@3] release ircode = 0x28, scancode = 0x006c, maptable = 0 [ 114.741330@3] remote_send_key sleep:0 [ 115.140329@0] remote_send_key [ 115.140445@0] press ircode = 0x27, scancode = 0x006a, maptable = 0 [ 115.140489@0] remote_send_key sleep:0 [ 115.511336@0] remote_send_key [ 115.511558@0] release ircode = 0x27, scancode = 0x006a, maptable = 0 [ 115.511644@0] remote_send_key sleep:0 [ 116.869555@0] remote_send_key [ 116.869633@0] press ircode = 0x26, scancode = 0x0067, maptable = 0 [ 116.869659@0] remote_send_key sleep:0 [ 117.241241@0] remote_send_key [ 117.241307@0] release ircode = 0x26, scancode = 0x0067, maptable = 0 [ 117.241322@0] remote_send_key sleep:0 [ 117.764895@0] remote_send_key [ 117.764917@0] press ircode = 0x0d, scancode = 0x001c, maptable = 0 [ 117.764920@0] remote_send_key sleep:0 [ 118.141419@0] remote_send_key [ 118.141723@0] release ircode = 0x0d, scancode = 0x001c, maptable = 0 [ 118.141816@0] remote_send_key sleep:0 [ 119.203060@0] remote_send_key [ 119.203095@0] press ircode = 0x28, scancode = 0x006c, maptable = 0 [ 119.203101@0] remote_send_key sleep:0 [ 119.581364@0] remote_send_key [ 119.581577@0] release ircode = 0x28, scancode = 0x006c, maptable = 0 [ 119.581667@0] remote_send_key sleep:0 [ 119.807598@0] remote_send_key [ 119.807622@0] press ircode = 0x26, scancode = 0x0067, maptable = 0 [ 119.807628@0] remote_send_key sleep:0 [ 120.181220@0] remote_send_key [ 120.181255@0] release ircode = 0x26, scancode = 0x0067, maptable = 0 [ 120.181263@0] remote_send_key sleep:0 [ 120.237860@0] remote_send_key [ 120.237909@0] press ircode = 0x0d, scancode = 0x001c, maptable = 0 [ 120.237924@0] remote_send_key sleep:0 [ 120.611213@3] remote_send_key [ 120.611240@3] release ircode = 0x0d, scancode = 0x001c, maptable = 0 [ 120.611246@3] remote_send_key sleep:0 [ 121.871399@0] remote_send_key [ 121.871438@0] press ircode = 0x28, scancode = 0x006c, maptable = 0 [ 121.871446@0] remote_send_key sleep:0 [ 122.251248@0] remote_send_key [ 122.251321@0] release ircode = 0x28, scancode = 0x006c, maptable = 0 [ 122.251345@0] remote_send_key sleep:0 [ 126.257342@0] remote_send_key [ 126.257386@0] press ircode = 0x1b, scancode = 0x000e, maptable = 0 [ 126.257393@0] remote_send_key sleep:0 [ 126.611254@2] remote_send_key [ 126.611335@2] release ircode = 0x1b, scancode = 0x000e, maptable = 0 [ 126.611349@2] remote_send_key sleep:0 [ 186.751258@1] [aml-i2s-dai]aiu i2s playback disable [ 186.751258@1] [ 186.751301@1] [aml-i2s-dai]audio_hw_958_enable 0 [ 186.751410@1] [aml-i2s-dai]i2s dma f0701000,phy addr 2e300000,mode 0,ch 2 [ 186.751434@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 186.751456@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 186.751476@1] iec958 mode PCM16 [ 186.751496@1] IEC958 16bit [ 186.751516@1] hdmitx: audio: aout notify rate 44100 [ 186.751533@1] hdmitx: audio: aout notify size 16 [ 186.751549@1] hdmitx: audio: no update [ 186.751568@1] [aml-spdif-dai]spdif dma f0701000,phy addr 2e300000 [ 196.752432@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4 [ 196.752548@1] audio_set_958_clk, freq=4, [ 196.752647@1] IEC958 16bit [ 196.752724@1] hdmitx: audio: aout notify rate 48000 [ 196.752791@1] hdmitx: audio: aout notify size 16 [ 196.752876@1] hdmitx: audio: audio channel num is 1 [ 196.752960@1] hdmitx: audio: SPDIF [ 196.753064@1] hdmitx: audio: current VIC: 16 [ 196.753126@1] hdmitx: audio: audio sample rate: 3 [ 196.753187@1] hdmitx: audio: reset audio N para [ 196.753291@1] hdmitx: audio: PCM out to HDMI [ 196.753354@1] hdmitx: audio: i2s_to_spdif_flag:1 [ 196.753413@1] hdmitx: audio: Enable audio spdif to HDMI [ 196.753491@1] hdmitx: audio: Audio Type: PCM [ 196.753782@1] hdmitx: audio: set audio param [ 196.753866@1] aml_i2s_close device type 8 [ 201.761957@1] speaker_events--mute =0 LibreELEC:~ #