http://ix.io/1yqn


[    0.000000@0] Initializing cgroup subsys cpuset
[    0.000000@0] Initializing cgroup subsys cpu
[    0.000000@0] Initializing cgroup subsys cpuacct
[    0.000000@0] Linux version 3.14.29 (kodi@virtualbox) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP Sat Sep 1 19:03:49 AWST 2018
[    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[    0.000000@0] no prop version_code
[    0.000000@0] bootconsole [earlycon0] enabled
[    0.000000@0] fdt Reserved memory table:
[    0.000000@0]            linux,meson-fb: 0x000000007e700000 - 0x0000000080000000  (25 MiB)
[    0.000000@0]                  linux,di: 0x000000007c900000 - 0x000000007e700000  (30 MiB)
[    0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c900000, size 30 MiB
[    0.000000@0]             linux,ion-dev: 0x000000007a900000 - 0x000000007c900000  (32 MiB)
[    0.000000@0]        linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000  (192 MiB)
[    0.000000@0] cma: Reserved 192 MiB at 67c00000, total cma pages:49152
[    0.000000@0]   linux,codec_mm_reserved: 0x0000000076800000 - 0x000000007a900000  (65 MiB)
[    0.000000@0] fdt Reserved memory total:  347 MiB
[    0.000000@0] cma: Reserved 8 MiB at 76000000, total cma pages:51200
[    0.000000@0] On node 0 totalpages: 513024
[    0.000000@0]   Normal zone: 11039 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 513024 pages, LIFO batch:31
[    0.000000@0] psci: probing function IDs from device-tree
[    0.000000@0] PERCPU: Embedded 11 pages/cpu @ffffffc075fa3000 s16320 r8192 d20544 u45056
[    0.000000@0] pcpu-alloc: s16320 r8192 d20544 u45056 alloc=11*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 501985
[    0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.mem_address=0x20000000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3f800000,576cvbs hdmimode=1080p60hz cvbsmode=576cvbs hdmitx=,rgb0 androidboot.firstboot=0 mac=20:18:0e:04:4a:37 androidboot.mac=20:18:0e:04:4a:37 bootfromsd console=tty0 systemd.show_status=auto noswap ssh
[    0.000000@0] logo: osd1
[    0.000000@0] logo: loaded
[    0.000000@0] logo: 0x3f800000
[    0.000000@0] logo: 576cvbs
[    0.000000@0] vout_serve: 576cvbs
[    0.000000@0] vout_serve: en: 1
[    0.000000@0] vout_serve: set_vout_init_vmode: 576cvbs
[    0.000000@0] logo: get hdmimode: 1080p60hz
[    0.000000@0] logo: get cvbsmode: 576cvbs
[    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0] Memory: 1650420K/2052096K available (6897K kernel code, 812K rwdata, 2604K rodata, 939K init, 2907K bss, 401676K reserved)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
[    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff8042b86800   (    43 MB)
[    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc07e700000   (  2023 MB)
[    0.000000@0]       .init : 0xffffffc0019c9000 - 0xffffffc001ab3fc0   (   940 kB)
[    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc0019c8744   (  9506 kB)
[    0.000000@0]       .data : 0xffffffc001ab4000 - 0xffffffc001b7f1c8   (   813 kB)
[    0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019c7fff]
[    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] arch_multi_cluster:0
[    0.000000@0] Hierarchical RCU implementation.
[    0.000000@0] 	RCU debugfs-based tracing is enabled.
[    0.000000@0] NR_IRQS:64 nr_irqs:64 0
[    0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[    0.008237@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
[    0.016692@0] Console: colour dummy device 80x25
[    0.021087@0] console [tty0] enabled
[    0.024673@0] bootconsole [earlycon0] disabled
[    0.031563@0] allocated 8388608 bytes of page_cgroup
[    0.031570@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.031586@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.031599@0] pid_max: default: 32768 minimum: 301
[    0.031703@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.031712@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.035939@0] Initializing cgroup subsys memory
[    0.035963@0] Initializing cgroup subsys devices
[    0.035970@0] Initializing cgroup subsys freezer
[    0.035978@0] Initializing cgroup subsys blkio
[    0.035985@0] Initializing cgroup subsys bfqio
[    0.036015@0] ftrace: allocating 23373 entries in 92 pages
[    0.054727@0] /cpus/cpu@0: Missing clock-frequency property
[    0.054751@0] /cpus/cpu@1: Missing clock-frequency property
[    0.054760@0] /cpus/cpu@2: Missing clock-frequency property
[    0.054769@0] /cpus/cpu@3: Missing clock-frequency property
[    0.055987@0] Meson chip version = RevB (1F:B - 12:0)
[    0.056762@1] CPU1: Booted secondary processor
[    0.057547@2] CPU2: Booted secondary processor
[    0.058309@3] CPU3: Booted secondary processor
[    0.058357@0] Brought up 4 CPUs
[    0.058380@0] SMP: Total of 4 processors activated.
[    0.058761@0] devtmpfs: initialized
[    0.063739@0] instabooting: 0
[    0.070380@0] cma: cma_init_reserved_areas, use_cma_first:1
[    0.070457@0] pinctrl core: initialized pinctrl subsystem
[    0.070930@0] regulator-dummy: no parameters
[    0.071450@0] NET: Registered protocol family 16
[    0.072924@0] aml_vdac_init: module init
[    0.073031@0] register canvas platform driver
[    0.073090@0] register rdma platform driver
[    0.073905@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001abc000
[    0.074183@0] DMA: preallocated 256 KiB pool for atomic allocations
[    0.075474@0] software IO TLB [mem 0x64c00000-0x65000000] (4MB) mapped at [ffffffc064c00000-ffffffc064ffffff]
[    0.075727@0] aml_i2c version: 20140813
[    0.075885@0] i2c-core: driver [pmu4] using legacy resume method
[    0.075941@0] codec_mm:codec_mm_module_init
[    0.076160@0] gxbb_mpll_clk: register mpll_clk_out0 success done
[    0.076173@0] gxbb_mpll_clk: register mpll_clk_out1 success done
[    0.076183@0] gxbb_mpll_clk: register mpll_clk_out2 success done
[    0.076355@0] clk_sys: register PLL sys_pll success done
[    0.076395@0] gxbb_clk: [ xtal 	] ->clockrate: 24000000Hz
[    0.076403@0] gxbb_clk: [ 32Khz 	] ->clockrate: 32000Hz
[    0.076411@0] gxbb_clk: [ clk81 	] ->clockrate: 166666666Hz
[    0.076418@0] gxbb_clk: [ fixed_pll 	] ->clockrate: 2000000000Hz
[    0.076426@0] gxbb_clk: [ fclk_div2 	] ->clockrate: 1000000000Hz
[    0.076433@0] gxbb_clk: [ fclk_div3 	] ->clockrate: 666666666Hz
[    0.076440@0] gxbb_clk: [ fclk_div4 	] ->clockrate: 500000000Hz
[    0.076446@0] gxbb_clk: [ fclk_div5 	] ->clockrate: 400000000Hz
[    0.076453@0] gxbb_clk: [ fclk_div7 	] ->clockrate: 285714285Hz
[    0.076480@0] gxbb_clk: clock initialization complete
[    0.076618@0] clkmsr: msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
[    0.078246@0] aml_iomap: amlogic iomap probe done
[    0.078698@0] pinmux-gxbb c1109880.pinmux: Init pinux probe!
[    0.079277@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[    0.079772@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
[    0.079781@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
[    0.079789@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
[    0.079796@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 1000000000
[    0.079804@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1296000000
[    0.079811@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1536000000
[    0.079818@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
[    0.081493@0] codec_mm has 2 memory regions
[    0.081520@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[    0.081535@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[    0.081606@0] codec_mm has 2 memory regions
[    0.081619@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[    0.081632@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[    0.082636@0] vpu: driver version: v03
[    0.082655@0] vpu: load vpu_clk: 666667000Hz(7)
[    0.082721@0] vpu: vpu_probe OK
[    0.083721@0] tv_vout: tvout_probe
[    0.083731@0] tv_vout: chrdev devno 266338304 for disp
[    0.083738@0] vout_notify: vout_register_server
[    0.083744@0] tv_vout: register tv module server ok
[    0.083912@0] tv_vout: create cdev tv
[    0.083919@0] tv_vout: tvout_probe OK
[    0.084255@0] canvas_probe reg=00000000c8838000,size=400
[    0.084274@0] canvas maped reg_base =ffffff800019c000
[    0.087446@0] rdma_probe
[    0.254794@0] bio: create slab <bio-0> at 0
[    0.255428@0] SCSI subsystem initialized
[    0.255822@0] usbcore: registered new interface driver usbfs
[    0.255891@0] usbcore: registered new interface driver hub
[    0.255974@0] usbcore: registered new device driver usb
[    0.256510@0] i2c-gpio i2c_gpio.36: using pins 153 (SDA) and 154 (SCL)
[    0.256638@0] pps_core: LinuxPPS API ver. 1 registered
[    0.256646@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.256697@0] PTP clock support registered
[    0.257623@0] hdmitx: system: amhdmitx_init
[    0.257631@0] hdmitx: system: Ver: 2014May6
[    0.257757@0] hdmitx: system: amhdmitx_probe
[    0.257997@0] hdmitx: system: not find match init-data
[    0.258007@0] hdmitx hpd irq = 89
[    0.258435@0] hdmitx20: Mapped PHY: 0xc0800000
[    0.258448@0] hdmitx20: Mapped PHY: 0xc1104400
[    0.258468@0] hdmitx20: Mapped PHY: 0xc8100000
[    0.258476@0] hdmitx20: Mapped PHY: 0xc8834000
[    0.258483@0] hdmitx20: Mapped PHY: 0xc883a000
[    0.258490@0] hdmitx20: Mapped PHY: 0xc883c000
[    0.258503@0] hdmitx20: Mapped PHY: 0xd0100000
[    0.258511@0] hdmitx20: Mapped PHY: 0xda83a000
[    0.258763@0] avmute set to 1
[    0.259036@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=7
[    0.259046@0] tv_vout: mode is 7,sync_duration_den=1,sync_duration_num=50
[    0.259059@0] tv_vout: already display in uboot
[    0.259065@0] vout_serve: vinfo mode is: 576cvbs
[    0.259072@0] vout_serve: init mode 576cvbs
[    0.259220@0] vout_serve: create_vout_fops OK
[    0.259227@0] vout_serve: create vout attribute OK
[    0.259234@0] vout_serve: meson_vout_probe OK
[    0.259340@0] logo: logo_init
[    0.259509@0] osd_rdma: osd_rdma_init: rdma_table p=0x76041000,op=0x76041000 , v=0xffffff80001b1000
[    0.259533@0] rdma_register, rdma_table_addr ffffff80001d1000 rdma_table_addr_phy 76042000 reg_buf ffffffc06522a000
[    0.259544@0] rdma_register success, handle 1 table_size 4096
[    0.259551@0] osd_rdma: osd_rdma_init:osd rdma handle = 1.
[    0.259753@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.261190@0] Switched to clocksource arch_sys_counter
[    0.268634@0] FS-Cache: Loaded
[    0.275498@0] NET: Registered protocol family 2
[    0.275886@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.275980@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.276174@0] TCP: Hash tables configured (established 16384 bind 16384)
[    0.276243@0] TCP: reno registered
[    0.276255@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.276292@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.276457@0] NET: Registered protocol family 1
[    0.276801@0] pwm: probe ok
[    0.276969@0] wifi: power_on_pin_OD = 0;
[    0.276981@0] aml_wifi wifi.31: [wifi_dev_probe] no power_on_pin2
[    0.277013@0] aml_wifi wifi.31: [pwm_single_channel_conf_dt] pwm phandle val=34,pwm-channel=4
[    0.277024@0] aml_wifi wifi.31: [pwm_single_channel_conf_dt] pwm_config[0] = 30519,pwm_config[1] = 15260
[    0.277034@0] aml_wifi wifi.31: [pwm_single_channel_conf_dt] wifi pwm dt ok
[    0.277051@0] aml_wifi wifi.31: [pwm_single_channel_conf] wifi pwm conf ok
[    0.277093@0] aml_wifi wifi.31: [wifi_dev_probe] dhd_static_buf setup
[    0.277152@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
[    0.277163@0] aml_wifi wifi.31: [wifi_dev_probe] interrupt_pin=235
[    0.277171@0] aml_wifi wifi.31: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
[    0.277181@0] aml_wifi wifi.31: [wifi_dev_probe] power_on_pin=234
[    0.277189@0] aml_wifi wifi.31: [wifi_dev_probe] clock_32k_pin=0
[    0.277361@0] aml_wifi wifi.31: [wifi_setup_dt] wifi_setup_dt
[    0.277388@0] aml_wifi wifi.31: [wifi_setup_dt] interrupt_pin(235)
[    0.277404@0] aml_wifi wifi.31: [wifi_setup_dt] power_on_pin(234)
[    0.277531@0] Unpacking initramfs...
[    0.317692@0] Freeing initrd memory: 2000K (ffffffc073ccc000 - ffffffc073ec0000)
[    0.319550@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.326758@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.327119@0] msgmni has been set to 3627
[    0.327894@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.327961@0] io scheduler noop registered
[    0.328086@0] io scheduler bfq registered (default)
[    0.328094@0] BFQ I/O-scheduler: v7r8
[    0.328659@0] meson-rng c8834000.rng: hwrng registered
[    0.331180@0] loop: module loaded
[    0.332547@0] tun: Universal TUN/TAP device driver, 1.6
[    0.332560@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.336294@0] libphy: stmmac: probed
[    0.336309@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.336317@0] eth0: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    0.336615@0] PPP generic driver version 2.4.2
[    0.336786@0] NET: Registered protocol family 24
[    0.336899@0] usbcore: registered new interface driver smsc95xx
[    0.337120@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.337138@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[    0.337240@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.337412@0] usbcore: registered new interface driver usb-storage
[    0.337561@0] usbcore: registered new interface driver usbserial
[    0.337627@0] usbcore: registered new interface driver usbserial_generic
[    0.337691@0] usbserial: USB Serial support registered for generic
[    0.337749@0] usbcore: registered new interface driver pl2303
[    0.337808@0] usbserial: USB Serial support registered for pl2303
[    0.338315@0] mousedev: PS/2 mouse device common for all mice
[    0.338520@0] i2c /dev entries driver
[    0.339015@0] ledtrig-cpu: registered to indicate activity on CPUs
[    0.339126@0] hidraw: raw HID events driver (C) Jiri Kosina
[    0.340842@0] usbcore: registered new interface driver usbhid
[    0.340853@0] usbhid: USB HID core driver
[    0.341015@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001ea4c0
[    0.341039@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[    0.341060@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[    1.678587@3] console [ttyS0] enabled
[    1.682511@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001ec4c0
[    1.689270@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[    1.699071@0] hdmitx: system: hdmitx_hdcp_init
[    1.703416@0] aml_vrtc rtc.30: rtc core: registered aml_vrtc as rtc0
[    1.709391@0] secmon has 1 memory regions
[    1.713261@0] secmon: share in base: 0xffffff80001f4000, share out base: 0xffffff80001f6000
[    1.721538@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
[    1.728498@0] secmon: probe done
[    1.731864@0] storage: storage in base: 0xffffff8001600000
[    1.737135@0] storage: storage out base: 0xffffff8001680000
[    1.742649@0] storage: storage block base: 0xffffff8001700000
[    1.748335@0] storage: probe done!
[    1.751930@0] aml_sd_emmc_probe: line 3594
[    1.755755@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    1.765487@0] aml_sd_emmc_reg_init 1149
[    1.768998@0] get property:                ocr_avail, value:0x00200080
[    1.775426@0] get property:                    f_min, value:300000
[    1.781561@0] get property:                    f_max, value:200000000
[    1.787926@0] get property:             max_req_size, value:0x00020000
[    1.794403@0] get property:                  pinname, str:emmc
[    1.800183@0] get property:                card_type, value:1
[    1.805870@0] get property:                 tx_phase, value:0
[    1.811568@0] get property:                gpio_dat3, str:
[    1.817001@0] get property:                 hw_reset, str:
[    1.822448@0] emmc:pdata->caps = c0000d47
[    1.826394@0] emmc:pdata->caps2 = 60
[    1.829930@0] emmc:pdata->pm_caps = 0
[    1.833561@0] storage 1, boot 1
[    1.836656@0] get_storage_dev return 1
[    1.871200@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    1.876612@0] aml_sd_emmc_probe: line 3594
[    1.876807@0] aml_sd_emmc_reg_init 1149
[    1.879370@0] get property:                     port, value:0x00000001
[    1.885786@0] get property:                ocr_avail, value:0x00200080
[    1.892252@0] get property:                    f_min, value:400000
[    1.898308@0] get property:                    f_max, value:100000000
[    1.904687@0] get property:             max_req_size, value:0x00020000
[    1.911151@0] get property:                   irq_in, value:3
[    1.916927@0] get property:                  irq_out, value:5
[    1.922544@0] get property:                  gpio_cd, str:
[    1.927971@0] get property:                  pinname, str:sd
[    1.933653@0] get property:                 jtag_pin, str:
[    1.939100@0] get property:                card_type, value:5
[    1.944778@0] get property:                gpio_dat3, str:
[    1.950248@0] sd:pdata->caps = 7
[    1.953401@0] sd:pdata->caps2 = 0
[    1.956604@0] sd:pdata->pm_caps = 0
[    1.960113@0] [aml_is_card_insert] card IN
[    1.964276@1] emmc: BKOPS_EN bit is not set
[    1.974465@1] emmc: trying cali 0-th time(s)
[    2.006805@1] emmc: delay[0]= 3875 padding= 1, bidx=3
[    2.006829@1] emmc: delay[1]= 3875 padding= 1, bidx=3
[    2.011226@1] emmc: delay[2]= 4625 padding= 3, bidx=4
[    2.016220@1] emmc: delay[3]= 4125 padding= 7, bidx=4
[    2.021231@1] emmc: delay[4]= 4000 padding= 8, bidx=4
[    2.026226@1] emmc: delay[5]= 3625 padding= 3, bidx=3
[    2.031236@1] emmc: delay[6]= 4000 padding= 8, bidx=4
[    2.036230@1] emmc: delay[7]= 3625 padding= 3, bidx=3
[    2.041238@1] emmc: calibration result @ 0: max(4625), min(3625)
[    2.047185@1] emmc: line_delay =0x85854066, max_cal_result =4625
[    2.053140@1] emmc: base_index_max 4, base_index_min 3
[    2.058249@1] emmc: clk 200000000 SDR mode tuning start
[    2.063663@1] emmc: rx_tuning_result[0] = 10
[    2.065415@0] normal card in
[    2.070785@1] emmc: rx_tuning_result[1] = 10
[    2.074972@1] emmc: rx_tuning_result[2] = 10
[    2.079023@1] emmc: best_win_start =0, best_win_size =3
[    2.084104@1] emmc: adj_win_start 6
[    2.087550@1] emmc: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12007
[    2.094886@1] emmc: gclock =0x1000245, gdelay=0x85854066, gadjust=0x12007
[    2.101319@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.101330@3] [aml_is_card_insert] card IN
[    2.101343@0] aml_sd_emmc_probe: line 3594
[    2.101392@2] [aml_is_card_insert] card IN
[    2.101614@0] aml_sd_emmc_reg_init 1149
[    2.101664@0] get property:                ocr_avail, value:0x00200080
[    2.101667@0] get property:                    f_min, value:400000
[    2.101668@0] get property:                    f_max, value:200000000
[    2.101671@0] get property:             max_req_size, value:0x00020000
[    2.101675@0] get property:                  pinname, str:sdio
[    2.101678@0] get property:                card_type, value:3
[    2.101703@0] sdio:pdata->caps = 7810f
[    2.101705@0] sdio:pdata->caps2 = 0
[    2.101707@0] sdio:pdata->pm_caps = 1
[    2.171199@1] emmc: new HS200 MMC card at address 0001
[    2.176128@1] emmc: clock 200000000, 8-bit-bus-width
[    2.176128@1]  
[    2.181513@1] mmcblk0: emmc:0001 AWPD3R 14.5 GiB 
[    2.186072@1] mmcblk0boot0: emmc:0001 AWPD3R partition 1 4.00 MiB
[    2.192120@1] mmcblk0boot1: emmc:0001 AWPD3R partition 2 4.00 MiB
[    2.198145@1] mmcblk0rpmb: emmc:0001 AWPD3R partition 3 4.00 MiB
[    2.204698@1]  mmcblk0: unknown partition table
[    2.209191@1] [mmc_read_partition_tbl] mmc read partition OK!
[    2.214170@1] add_emmc_partition
[    2.217484@1] [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000 
[    2.225738@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[    2.231647@0] [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000 
[    2.231811@1] ion_dev has 1 memory regions
[    2.244082@0] [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000020000000 
[    2.246055@1] fb: osd_init_module
[    2.246148@1] fb: viu vsync irq: 35
[    2.246153@1] meson-fb has 1 memory regions
[    2.246185@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
[    2.246202@1] fb: osd_probe vinfo:ffffffc001b18ea0
[    2.246208@1] fb: init fbdev bpp is:32
[    2.279443@1] [mmcblk0p04]                  env  offset 0x000027400000, size 0x000000800000 
[    2.287632@2] fb: set osd0 reverse as NONE
[    2.291675@1] [mmcblk0p05]                 logo  offset 0x000028400000, size 0x000002000000 
[    2.296813@0] fb: osd probe OK
[    2.296954@0] ge2d: ge2d_init_module
[    2.296963@0] ge2d: ge2d_dev major:243
[    2.310370@1] [mmcblk0p06]             recovery  offset 0x00002ac00000, size 0x000002000000 
[    2.310421@0] ge2d: ge2d clock is 400 MHZ
[    2.310425@0] ge2d: ge2d: pdev=ffffffc065062c00, irq=182, rstc=0xffffffc064511280, clk=ffffffc01038be00
[    2.310473@0] ge2d: mapped phy: 0xd0160000
[    2.310480@0] ge2d: ge2d start monitor
[    2.310605@0] ge2d: ge2d workqueue monitor start
[    2.310643@0] sysled: module init
[    2.310734@0] sysled: led_gpio = 135
[    2.310735@0] sysled: active_low = 0
[    2.310837@0] sysled: module probed ok
[    2.310990@0] pwmled: module init
[    2.311222@0] codec:Amlogic A/V streaming port init
[    2.366620@0] [mmcblk0p07]                  rsv  offset 0x00002d400000, size 0x000000800000 
[    2.374913@0] [mmcblk0p08]                  tee  offset 0x00002e400000, size 0x000000800000 
[    2.383309@0] [mmcblk0p09]                crypt  offset 0x00002f400000, size 0x000002000000 
[    2.383799@2] codec:get gate demux control ok ffffffc06506d780
[    2.383802@2] codec:get gate parser_top control ok ffffffc06506d800
[    2.383806@2] codec:get gate vpu_intr control ok ffffffc06506d880
[    2.383810@2] codec:get gate vdec control ok ffffffc06506d900
[    2.384421@2] codec:[tsync_pcr_init]init success.
[    2.384504@2] codec:amvideocap_probe,amvideocap
[    2.384506@2] codec:use cma buf.
[    2.386109@2] codec:vdec_request_irq ffffffc001554350, vsync
[    2.386279@2] codec:create_ge2d_work_queue video task ok
[    2.438507@2] rdma_register, rdma_table_addr ffffff8000431000 rdma_table_addr_phy 76050000 reg_buf ffffffc064518000
[    2.448772@2] rdma_register success, handle 2 table_size 32768
[    2.454549@2] video_rdma:rdma_init video rdma handle = 2.
[    2.456888@0] [mmcblk0p10]                 misc  offset 0x000031c00000, size 0x000002000000 
[    2.457024@0] [mmcblk0p11]            instaboot  offset 0x000034400000, size 0x000020000000 
[    2.457135@0] [mmcblk0p12]                 boot  offset 0x000054c00000, size 0x000002000000 
[    2.457245@0] [mmcblk0p13]               system  offset 0x000057400000, size 0x000060000000 
[    2.457354@0] [mmcblk0p14]                 data  offset 0x0000b7c00000, size 0x0002ec200000 
[    2.457393@0] card key: card_blk_probe.
[    2.457398@0] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
[    2.457400@0] emmc key: emmc_key_init:552 ok.
[    2.460073@1] amlmmc_dtb_init: register dtb chardev
[    2.460073@1] calc 1080c046, store 4d4b5b00
[    2.460075@1] cpy 1 is not valid
[    2.468955@1] calc ad692e12, store 0
[    2.468956@1] cpy 0 is not valid
[    2.468958@1] total valid 0
[    2.469519@0] amlmmc_dtb_init: register dtb chardev OK
[    2.469519@0] Exit aml_emmc_partition_ops OK.
[    2.471599@0]  mmcblk0boot1: unknown partition table
[    2.472344@0]  mmcblk0boot0: unknown partition table
[    2.472510@0] clear_emmc_wait_flag
[    2.512418@1] sd: new high speed SDHC card at address 0001
[    2.512762@0] sd: clock 50000000, 4-bit-bus-width
[    2.512762@0]  
[    2.512762@0] mmcblk1: sd:0001 00000 29.8 GiB 
[    2.513599@0]  mmcblk1: p1 p2
[    2.580063@2] codec:register clk_set_setting cpu[31]
[    2.585427@2] DI: di_module_init ok.
[    2.588491@2] DI: di_module_init: major 238
[    2.592803@2] DI: di_probe
[    2.595428@3] deinterlace has 1 memory regions
[    2.599738@3] DI: di reveser memory 0x7c900000, size 30MB.
[    2.599746@3] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[    2.607321@3] DI-di_probe: get flag_cma error.
[    2.611910@3] di_irq:78,timerc_irq:38
[    2.615470@3] rdma_register, rdma_table_addr ffffff800043a000 rdma_table_addr_phy 7604a000 reg_buf ffffffc064432000
[    2.625679@3] rdma_register success, handle 3 table_size 8192
[    2.631361@3] DI: di_probe allocate rdma channel 3.
[    2.636186@3] DI: DI hw version 2.
[    2.639556@3] 0x000000db:Y=db,U=0,V=0
[    2.643176@3] 0x000000dc:Y=dc,U=0,V=0
[    2.646794@3] 0x000000dd:Y=dd,U=0,V=0
[    2.650416@3] 0x000000de:Y=de,U=0,V=0
[    2.654043@3] 0x000000df:Y=df,U=0,V=0
[    2.657661@3] 0x000000e0:Y=e0,U=0,V=0
[    2.661288@3] 0x000000e1:Y=e1,U=0,V=0
[    2.664906@3] 0x000000e2:Y=e2,U=0,V=0
[    2.668529@3] 0x000000e3:Y=e3,U=0,V=0
[    2.672156@3] 0x000000f0:Y=f0,U=0,V=0
[    2.675776@3] 0x000000f1:Y=f1,U=0,V=0
[    2.679396@3] 0x000000f2:Y=f2,U=0,V=0
[    2.683023@3] 0x000000f3:Y=f3,U=0,V=0
[    2.686641@3] 0x000000f4:Y=f4,U=0,V=0
[    2.690264@3] 0x000000f5:Y=f5,U=0,V=0
[    2.693890@3] 0x000000f6:Y=f6,U=0,V=0
[    2.697510@3] 0x000000f7:Y=f7,U=0,V=0
[    2.701131@3] 0x000000f8:Y=f8,U=0,V=0
[    2.704758@3] 0x000000f9:Y=f9,U=0,V=0
[    2.708376@3] 0x000000fa:Y=fa,U=0,V=0
[    2.712004@3] 0x000000fb:Y=fb,U=0,V=0
[    2.715621@3] 0x000000fc:Y=fc,U=0,V=0
[    2.719575@3] efusekeynum: 4
[    2.722122@3] efusekeyname:             mac	offset:     0	size:     6
[    2.728476@3] efusekeyname:          mac_bt	offset:     6	size:     6
[    2.734872@3] efusekeyname:        mac_wifi	offset:    12	size:     6
[    2.741254@3] efusekeyname:            usid	offset:    18	size:    16
[    2.747825@3] efuse efuse.10: probe OK!
[    2.751660@3] key unify config unifykey-num is 11
[    2.756100@3] key unify fact unifykey-num is 11
[    2.760560@3] aml_unifykeys_probe:1280=============unifykey_devno:ec00000
[    2.767467@3] 6unifykey: device unifykeys created ok
[    2.772380@3] 6aml_unifykeys_init done!
[    2.776169@3] PPMGRDRV: warn: ppmgr module init func called
[    2.781753@3] PPMGRDRV: err: ppmgr_driver_probe called
[    2.786779@3] ppmgr has 1 memory regions
[    2.790678@3] PPMGRDRV: info: init ppmgr memsource 7a900000->7c8fffff
[    2.797059@3] PPMGRDRV: info: ppmgr_dev major:235
[    2.801914@3] PPMGRDRV: info: ppmgr_probe done
[    2.806296@3] amlogic rfkill init
[    2.809417@3] enter bt_probe of_node
[    2.812935@3] not get gpio_en
[    2.815844@3] power on valid level is high
[    2.819726@3] bt: power_on_pin_OD = 0;
[    3.241296@3] audio_dsp: [dsp]register dsp to char divece(257)
[    3.241974@3] amaudio: amaudio: driver amaudio succuess!
[    3.246977@3] [RX]-hdmirx: hdmirx_init.
[    3.250536@3] ESM HLD: Initializing...
[    3.254255@3] ESM HLD: Registering device range 'esm_rx'...
[    3.259780@3] ESM HLD: Device range 'esm_rx' has been registered.
[    3.265810@3] ESM HLD: Creating class /sys/class/elliptic_rx...
[    3.271739@3] ESM HLD: The class /sys/class/elliptic_rx has been created.
[    3.278394@3] ESM HLD: Creating device 'esm_rx'...
[    3.283247@3] ESM HLD: Device 'esm_rx' has been created.
[    3.288398@3] ESM HLD: Done initializing the HLD driver.
[    3.293669@3] module init
[    3.296477@3] storage 1, boot 1
[    3.299353@3] get_storage_dev return 1
[    3.303075@3] aml_nand d0074800.nand: do not init nand
[    3.308445@3] saradc c1108680.saradc: initialized by BL30
[    3.313515@3] saradc c1108680.saradc: calibration start:
[    3.318805@3] saradc c1108680.saradc: nominal=0, value=7
[    3.324071@3] saradc c1108680.saradc: nominal=256, value=255
[    3.329669@3] saradc c1108680.saradc: nominal=512, value=515
[    3.335282@3] saradc c1108680.saradc: nominal=768, value=771
[    3.340883@3] saradc c1108680.saradc: nominal=1023, value=1022
[    3.346624@3] saradc c1108680.saradc: calibration end: coef=4064
[    3.352688@1] remote: Driver init
[    3.355881@1] remote: platform_data g_remote_ao_offset=580
[    3.361289@1] remote: platform_data irq =228
[    3.365531@1] remote: set drvdata completed
[    3.369742@1] remote: device_create_file completed 
[    3.374918@1] input: aml_keypad as /devices/meson-remote.12/input/input0
[    3.381516@3] remote: input_register_device completed 
[    3.386508@3] remote: set_remote_mode[78]
[    3.390450@3] remote: remote config major:233
[    3.394966@3] remote: physical address:0x644c8000
[    3.399682@3] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
[    3.405797@3] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
[    3.412528@3] gpio-key gpio_keypad.47: gpio_key: 0 power(125)
[    3.418236@3] gpio-key gpio_keypad.47: start setup_timer
[    3.423478@3] gpio-key gpio_keypad.47: power key(116) registed.
[    3.429458@3] input: gpio_keypad as /devices/gpio_keypad.47/input/input1
[    3.436085@3] gpio-key gpio_keypad.47: gpio keypad register input device completed.
[    3.443581@3] input input1: gpio keypad major:232
[    3.448492@3] cpuinfo: probe done
[    3.452035@3] input: cec_input as /devices/virtual/input/input2
[    3.457543@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
[    3.463502@3] cectx aocec: aml_cec_probe(): no hhi reg resource
[    3.469424@3] cectx aocec: aml_cec_probe(): can't find hdmirx
[    3.476195@3] cec: wake up flag:0
[    3.480284@3] aml-i2s-dai I2S.38: I2S Mic is in platform!
[    3.483872@3] aml_pcm_dai: pcm mode detection =1
[    3.489001@3] aml_snd_card: headphone detection disable=1
[    3.493602@3] aml_snd_card: no spk event delay time set
[    3.499219@3] aml_snd_m8_card aml_m8_snd.46: dummy <-> I2S.38 mapping ok
[    3.505744@3] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.39 mapping ok
[    3.512516@3] aml_pcm: enter aml_pcm_new dai->name: PCM.40 dai->id: 0
[    3.518926@3] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.40 mapping ok
[    3.525957@3] input input1: key 116 up
[    3.534015@0] TCP: cubic registered
[    3.537403@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
[    3.538007@0] NET: Registered protocol family 10
[    3.549830@0] NET: Registered protocol family 17
[    3.554445@0] Key type dns_resolver registered
[    3.559704@0] Registering SWP/SWPB emulation handler
[    3.564184@0] regulator-dummy: disabling
[    3.567809@0] console [netcon0] enabled
[    3.571395@0] netconsole: network logging started
[    3.576068@0] aml_vrtc rtc.30: setting system clock to 2015-01-01 00:00:06 UTC (1420070406)
[    3.585275@0] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
[    3.589779@0] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
[    3.597043@0] gxbb_pm: enter meson_pm_probe!
[    3.599888@0] gxbb_pm: meson_pm_probe done
[    3.604393@0] cpucore_cooling_register, max_cpu_core_num:4
[    3.624544@0] aml_istbt_dev_ready NULL
[    3.624591@0] ALSA device list:
[    3.625766@0]   #0: AML-M8AUDIO
[    3.629317@0] Freeing unused kernel memory: 936K (ffffffc0019c9000 - ffffffc001ab3000)
[    3.659038@1] fb: Frame buffer memory assigned at
[    3.659049@1] fb:  0, phy: 0x000000007e700000, vir:0xffffff8001a00000, size=24576K
[    3.659049@1] 
[    3.659057@1] fb: ---------------clear fb0 memory ffffff8001a00000
[    3.672415@1] fb: osd[0] canvas.idx =0x40
[    3.672421@1] fb: osd[0] canvas.addr=0x7e700000
[    3.672426@1] fb: osd[0] canvas.width=7680
[    3.672430@1] fb: osd[0] canvas.height=3240
[    3.672435@1] fb: osd[0] frame.width=1920
[    3.672439@1] fb: osd[0] frame.height=1080
[    3.676930@1] fb: osd[0] canvas.idx =0x40
[    3.676932@1] fb: osd[0] canvas.addr=0x7e700000
[    3.676933@1] fb: osd[0] canvas.width=7680
[    3.676935@1] fb: osd[0] canvas.height=2160
[    3.676937@1] fb: osd[0] frame.width=720
[    3.676938@1] fb: osd[0] frame.height=576
[    3.698608@1] fb: Frame buffer memory assigned at
[    3.698622@1] fb:  1, phy: 0x000000007ff00000, vir:0xffffff8003280000, size=1024K
[    3.698622@1] 
[    3.698631@1] fb: fb1 open, logo index:1
[    3.736888@3] codec:free_alloced_keep_buffer           (null).          (null).          (null)
[    3.737014@3] vfm_map_store:rm default
[    3.737014@3] 
[    3.737078@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    3.737078@3] 
[    3.737155@3] fb: osd[0] enable: 1 (platform_init)
[    3.756963@3] fb: osd[1] enable: 0 (platform_init)
[    3.856976@2] Console: switching to colour frame buffer device 90x36
[    3.871762@0] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
[    4.374473@1] dwc_otg: Core Release: 3.10a
[    4.374480@1] dwc_otg: Setting default values for core params
[    4.374491@1] dwc_otg: curmode: 1, host_only: 1
[    4.386659@1] dwc_otg: Using Buffer DMA mode
[    4.386664@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    4.386668@1] dwc_otg: Working on port type = HOST
[    4.387063@1] dwc_otg dwc2_b: DWC OTG Controller
[    4.387081@1] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
[    4.387104@1] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[    4.387108@1] dwc_otg: -------hcd->flags.d32 = 0
[    4.387128@1] dwc_otg: Init: Port Power? op_state=1
[    4.387131@1] dwc_otg: Init1: Power Port (0)
[    4.387258@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.387263@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.387269@1] usb usb1: Product: DWC OTG Controller
[    4.387273@1] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[    4.387277@1] usb usb1: SerialNumber: dwc2_b
[    4.387700@0] hub 1-0:1.0: USB hub found
[    4.387718@0] hub 1-0:1.0: 1 port detected
[    4.387892@0] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
[    4.399481@0] dwc_otg: Core Release: 3.10a
[    4.399487@0] dwc_otg: Setting default values for core params
[    4.399497@0] dwc_otg: curmode: 1, host_only: 0
[    4.421668@0] dwc_otg: Using Buffer DMA mode
[    4.421673@0] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    4.421677@0] dwc_otg: Working on port type = OTG
[    4.421680@0] dwc_otg: Current port type: SLAVE
[    4.421892@0] dwc_otg dwc2_a: DWC OTG Controller
[    4.421907@0] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
[    4.421924@0] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[    4.421993@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.421999@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.422004@0] usb usb2: Product: DWC OTG Controller
[    4.422008@0] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd
[    4.422013@0] usb usb2: SerialNumber: dwc2_a
[    4.422393@0] hub 2-0:1.0: USB hub found
[    4.422410@0] hub 2-0:1.0: 1 port detected
[    4.422534@0] dwc_otg: Dedicated Tx FIFOs mode
[    4.422893@0] dwc_otg: using timer detectid change, ffffffc0645cc000
[    4.441240@0] HOST mode
[    4.471229@0] dwc_otg: -------hcd->flags.d32 = 0
[    4.471264@0] dwc_otg: Init: Port Power? op_state=1
[    4.471269@0] dwc_otg: Init1: Power Port (0)
[    4.581259@0] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    4.761272@2] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    4.761496@2] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[    4.962346@2] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    4.962357@2] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.962361@2] usb 1-1: Product: USB2.0 Hub
[    4.962964@0] hub 1-1:1.0: USB hub found
[    4.963215@0] hub 1-1:1.0: 4 ports detected
[    4.964630@0] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    5.141240@0] usb 2-1: new full-speed USB device number 2 using dwc_otg
[    5.141804@0] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[    5.144555@1] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[    5.144944@1] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[    5.355401@3] usb 2-1: config 1 has an invalid interface number: 6 but max is 4
[    5.355411@3] usb 2-1: config 1 has an invalid interface number: 7 but max is 4
[    5.355416@3] usb 2-1: config 1 has no interface number 3
[    5.355421@3] usb 2-1: config 1 has no interface number 4
[    5.358864@3] usb 2-1: New USB device found, idVendor=1210, idProduct=000f
[    5.358870@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.358875@3] usb 2-1: Product: DigiTech RP350
[    5.358879@3] usb 2-1: Manufacturer: DigiTech
[    5.451529@2] usb 1-1.2: new high-speed USB device number 3 using dwc_otg
[    5.552019@2] usb 1-1.2: New USB device found, idVendor=045e, idProduct=02d5
[    5.552026@2] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.552031@2] usb 1-1.2: Product: Xbox USB Tuner
[    5.552036@2] usb 1-1.2: Manufacturer: Microsoft Corp.
[    5.552040@2] usb 1-1.2: SerialNumber: 005157021015
[    5.631449@2] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[    5.689911@2] random: nonblocking pool is initialized
[    5.732676@2] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
[    5.732681@2] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.732686@2] usb 1-1.3: Product: USB2.0 Hub
[    5.733331@0] hub 1-1.3:1.0: USB hub found
[    5.733666@0] hub 1-1.3:1.0: 4 ports detected
[    6.011449@0] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg
[    6.127224@0] usb 1-1.3.1: New USB device found, idVendor=045e, idProduct=0779
[    6.127230@0] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.127234@0] usb 1-1.3.1: Product: Microsoft® LifeCam HD-3000
[    6.127239@0] usb 1-1.3.1: Manufacturer: Microsoft
[    6.201500@0] usb 1-1.3.3: new full-speed USB device number 6 using dwc_otg
[    6.304073@2] usb 1-1.3.3: New USB device found, idVendor=0c45, idProduct=3451
[    6.304080@2] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.304085@2] usb 1-1.3.3: Product: Airmouse
[    6.304089@2] usb 1-1.3.3: Manufacturer: AliTV Remote V1
[    6.307963@2] input: AliTV Remote V1 Airmouse as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:0C45:3451.0001/input/input3
[    6.308200@3] hid-generic 0003:0C45:3451.0001: input,hidraw0: USB HID v1.01 Keyboard [AliTV Remote V1 Airmouse] on usb-dwc2_b-1.3.3/input0
[    6.309812@2] input: AliTV Remote V1 Airmouse as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.1/0003:0C45:3451.0002/input/input4
[    6.310098@2] hid-generic 0003:0C45:3451.0002: input,hidraw1: USB HID v1.01 Mouse [AliTV Remote V1 Airmouse] on usb-dwc2_b-1.3.3/input1
[    6.311716@2] hid-generic 0003:0C45:3451.0003: hiddev0,hidraw2: USB HID v1.10 Device [AliTV Remote V1 Airmouse] on usb-dwc2_b-1.3.3/input2
[    6.314313@2] input: AliTV Remote V1 Airmouse as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.3/0003:0C45:3451.0004/input/input5
[    6.314612@2] hid-generic 0003:0C45:3451.0004: input,hidraw3: USB HID v1.01 Gamepad [AliTV Remote V1 Airmouse] on usb-dwc2_b-1.3.3/input3
[    6.391558@2] usb 1-1.3.4: new high-speed USB device number 7 using dwc_otg
[    6.480427@0] EXT4-fs (mmcblk1p2): recovery complete
[    6.492633@2] usb 1-1.3.4: New USB device found, idVendor=05e3, idProduct=0608
[    6.492639@2] usb 1-1.3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.492644@2] usb 1-1.3.4: Product: USB2.0 Hub
[    6.493308@0] hub 1-1.3.4:1.0: USB hub found
[    6.493621@2] hub 1-1.3.4:1.0: 4 ports detected
[    6.497147@0] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[   12.443313@2] systemd[1]: System time before build time, advancing clock.
[   12.453735@2] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   12.454017@2] systemd[1]: Detected architecture arm64.
[   12.454176@2] systemd[1]: Set hostname to <LibreELEC>.
[   12.517812@1] systemd[1]: Listening on udev Control Socket.
[   12.518114@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   12.518231@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.518467@1] systemd[1]: Listening on RPCbind Server Activation Socket.
[   12.519003@1] systemd[1]: Created slice System Slice.
[   12.520340@1] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[   12.520431@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   12.521747@1] systemd[1]: Mounting Variable Directory...
[   12.523591@1] systemd[1]: Mounting POSIX Message Queue File System...
[   12.523975@1] systemd[1]: Created slice User and Session Slice.
[   12.525457@1] systemd[1]: Mounting Debug File System...
[   12.526228@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.526569@1] systemd[1]: Listening on Journal Socket.
[   12.529634@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   12.535067@1] systemd[1]: Starting Load Kernel Modules...
[   12.535380@1] systemd[1]: Listening on Journal Socket (/dev/log).
[   12.535488@1] systemd[1]: Reached target RPC Port Mapper.
[   12.537000@1] systemd[1]: Starting Show Version...
[   12.538720@1] systemd[1]: Starting Remount Root and Kernel File Systems...
[   12.538982@1] systemd[1]: Listening on udev Kernel Socket.
[   12.540992@1] systemd[1]: Starting Setup machine-id...
[   12.541116@1] systemd[1]: Reached target Slices.
[   12.541225@1] systemd[1]: Reached target Paths.
[   12.541300@1] systemd[1]: Reached target Swap.
[   12.542654@1] systemd[1]: Mounting Temporary Directory...
[   12.544278@1] systemd[1]: Starting Samba Configuration...
[   12.553139@1] systemd[1]: Mounted Debug File System.
[   12.553297@1] systemd[1]: Mounted POSIX Message Queue File System.
[   12.553371@1] systemd[1]: Mounted Variable Directory.
[   12.553435@1] systemd[1]: Mounted Temporary Directory.
[   12.555212@1] systemd[1]: Started Debug Shell on /dev/ttyS0.
[   12.556109@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   12.559965@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   12.560721@1] systemd[1]: Started Show Version.
[   12.561444@1] systemd[1]: Started Remount Root and Kernel File Systems.
[   12.561512@0] media: Linux media interface: v0.10
[   12.562093@1] systemd[1]: Started Setup machine-id.
[   12.565205@1] systemd[1]: Starting Journal Service...
[   12.571085@0] Linux video capture interface: v2.00
[   12.571096@0] WARNING: You are using an experimental version of the media stack.
[   12.571096@0] 	As the driver is backported to an older kernel, it doesn't offer
[   12.571096@0] 	enough quality for its usage in production.
[   12.571096@0] 	Use it with care.
[   12.571096@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   12.571096@0] 	a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[   12.578268@1] systemd[1]: Starting udev Coldplug all Devices...
[   12.579657@1] systemd[1]: Starting Create Static Device Nodes in /dev...
[   12.582475@1] systemd[1]: Started Samba Configuration.
[   12.587761@1] amlvid:err: amlvideo_init called
[   12.587769@1] amlvid:err: amlvideo_create_instance called
[   12.587776@1] amlvid:err: v4l2_dev.name=:amlvideo-000
[   12.587973@1] amlvideo-000: V4L2 device registered as video10
[   12.589404@1] systemd[1]: Started Load Kernel Modules.
[   12.591615@1] systemd[1]: Starting Apply Kernel Variables...
[   12.594340@1] systemd[1]: Mounting Configuration File System...
[   12.595949@1] systemd[1]: Started Create Static Device Nodes in /dev.
[   12.596604@1] systemd[1]: Reached target Local File Systems (Pre).
[   12.596688@1] systemd[1]: Reached target Local File Systems.
[   12.599359@1] systemd[1]: Mounted Configuration File System.
[   12.656104@0] systemd[1]: Started Journal Service.
[   12.671589@0] systemd-journald[1802]: Received request to flush runtime journal from PID 1
[   13.494682@3] Console: switching to colour dummy device 80x25
[   13.512134@0] Triggered SDIO WiFi power on and bus rescan.
[   13.512163@0] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI  Disable! 234
[   13.656714@2] mali-utgard d00c0000.mali: max pp is 3
[   13.656726@2] mali-utgard d00c0000.mali: set min pp to default 1
[   13.656731@2] mali-utgard d00c0000.mali: min pp is 1
[   13.656735@2] mali-utgard d00c0000.mali: set min clk default to 0
[   13.656740@2] mali-utgard d00c0000.mali: min clk  is 0
[   13.656793@2] mali-utgard d00c0000.mali: hiu io source  0xffffff80015fe000
[   13.656803@2] mali-utgard d00c0000.mali: hiu io source  0xffffff8001662000
[   13.656807@2] mali-utgard d00c0000.mali: num of pp used most of time 3
[   13.656812@2] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
[   13.656876@2] mali-utgard d00c0000.mali: max clk set 5
[   13.656888@2] mali-utgard d00c0000.mali: max clk  is 5
[   13.656893@2] mali-utgard d00c0000.mali: turbo clk set to 6
[   13.656897@2] mali-utgard d00c0000.mali: turbo clk  is 6
[   13.656901@2] mali-utgard d00c0000.mali: default clk  is 3
[   13.656908@2] mali-utgard d00c0000.mali: ====================0====================
[   13.656908@2] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
[   13.656917@2] mali-utgard d00c0000.mali: ====================1====================
[   13.656917@2] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
[   13.656925@2] mali-utgard d00c0000.mali: ====================2====================
[   13.656925@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
[   13.656933@2] mali-utgard d00c0000.mali: ====================3====================
[   13.656933@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
[   13.656942@2] mali-utgard d00c0000.mali: ====================4====================
[   13.656942@2] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
[   13.656950@2] mali-utgard d00c0000.mali: ====================5====================
[   13.656950@2] clk_freq= 792000000, clk_parent=  gp0_pll, voltage=1150, keep_count=1, threshod=<230 255>, clk_sample=792
[   13.656958@2] mali-utgard d00c0000.mali: ====================6====================
[   13.656958@2] clk_freq= 792000000, clk_parent=  gp0_pll, voltage=1150, keep_count=1, threshod=<230 255>, clk_sample=792
[   13.656964@2] mali-utgard d00c0000.mali: clock dvfs table size is 7
[   13.696942@2] gpu cooling register okay with err=0
[   13.696957@2] register GPU  cooling error
[   13.696961@2] gpu core cooling register okay with err=-22
[   13.697406@2] Mali: Mali device driver loaded
[   13.707655@2] remote: cur_mode = 0
[   13.707668@2] remote: set_remote_mode[78]
[   13.769535@2] WARNING: You are using an experimental version of the media stack.
[   13.769535@2] 	As the driver is backported to an older kernel, it doesn't offer
[   13.769535@2] 	enough quality for its usage in production.
[   13.769535@2] 	Use it with care.
[   13.769535@2] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   13.769535@2] 	a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[   13.772258@2] WARNING: You are using an experimental version of the media stack.
[   13.772258@2] 	As the driver is backported to an older kernel, it doesn't offer
[   13.772258@2] 	enough quality for its usage in production.
[   13.772258@2] 	Use it with care.
[   13.772258@2] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   13.772258@2] 	a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[   13.774361@2] 2:1:1: cannot get freq at ep 0x1
[   13.779934@2] 2:1:2: cannot get freq at ep 0x1
[   13.786078@3] 2:2:1: cannot get freq at ep 0x82
[   13.791735@3] 2:2:2: cannot get freq at ep 0x82
[   13.792219@2] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold state, will try to load a firmware
[   13.794795@2] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[   13.795144@3] frame_vector: module license 'unspecified' taints kernel.
[   13.795150@3] Disabling lock debugging due to kernel taint
[   13.821244@0] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI  Enable! 234
[   14.132780@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   14.132792@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[   14.132816@3] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[   14.133853@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   14.133866@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[   14.133889@3] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[   14.138989@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   14.139000@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[   14.139034@3] aml_sd_emmc_data_thread 2639 sdio: cmd:8
[   14.140322@0] 8021q: 802.1Q VLAN Support v1.8
[   14.145126@2] dib0700: firmware started successfully.
[   14.171065@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   14.173761@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   14.176418@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   14.181763@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   14.278965@3] sdio: clk 200000000 SDR mode tuning start
[   14.279144@3] sdio: rx_tuning_result[0] = 10
[   14.279313@3] sdio: rx_tuning_result[1] = 10
[   14.279473@3] sdio: rx_tuning_result[3] = 10
[   14.279619@3] sdio: rx_tuning_result[4] = 10
[   14.279623@3] sdio: best_win_start =3, best_win_size =4
[   14.279627@3] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x2000
[   14.279636@3] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x2000
[   14.282949@3] sdio: queuing unknown CIS tuple 0x91 (3 bytes)
[   14.282981@3] sdio: new ultra high speed SDR104 SDIO card at address 0001
[   14.282986@0] sdio: clock 200000000, 4-bit-bus-width
[   14.282986@0]  
[   14.318890@0] [sdio_reinit] finish
[   14.340809@1] cfg80211: Calling CRDA to update world regulatory domain
[   14.361568@0] Bluetooth: Core ver 2.18
[   14.369859@0] NET: Registered protocol family 31
[   14.369870@0] Bluetooth: HCI device and connection manager initialized
[   14.369899@0] Bluetooth: HCI socket layer initialized
[   14.369906@0] Bluetooth: L2CAP socket layer initialized
[   14.369938@0] Bluetooth: SCO socket layer initialized
[   14.381653@0] dhd_module_init: in
[   14.381681@0] ======== bcm_wlan_set_plat_data ========
[   14.381685@0] host_oob_irq: 100
[   14.381689@0] host_oob_irq_flags=0x414
[   14.381692@0] dhd_wifi_platform_load: Enter
[   14.381709@0] Power-up adapter 'DHD generic adapter'
[   14.381713@0] wifi_platform_set_power = 1
[   14.381716@0] ======== PULL WL_REG_ON HIGH! ========
[   14.381738@0] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI  Disable! 234
[   14.416028@2] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   14.416092@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   14.416098@3] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[   14.416124@3] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[   14.416149@2] btsdio: probe of sdio:0001:3 failed with error -110
[   14.581787@0] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI  Enable! 234
[   14.651395@2] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in warm state.
[   14.653353@3] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   14.653504@3] dvbdev: DVB: registering new adapter (Microsoft Xbox One Digital TV Tuner)
[   14.653518@3] usb 1-1.2: media controller created
[   14.654424@3] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   14.859298@2] mn88472 1-0018: Panasonic MN88472 successfully identified
[   14.896425@2] tda18250 1-0060: NXP TDA18250BHN/M successfully identified
[   14.898710@2] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Panasonic MN88472)...
[   14.898738@2] dvbdev: dvb_create_media_entity: media entity 'Panasonic MN88472' registered.
[   14.899709@3] dvb-usb: Microsoft Xbox One Digital TV Tuner successfully initialized and connected.
[   14.900102@3] usbcore: registered new interface driver dvb_usb_dib0700
[   15.091201@0] wifi_platform_bus_enumerate device present 1
[   15.091213@0] ======== Card detection to detect SDIO card! ========
[   15.091218@0] sdio_reset_comm():
[   15.118676@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   15.121215@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   15.123738@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   15.128269@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   15.220183@3] sdio: clk 200000000 SDR mode tuning start
[   15.220329@3] sdio: rx_tuning_result[0] = 10
[   15.220463@3] sdio: rx_tuning_result[1] = 10
[   15.220608@3] sdio: rx_tuning_result[3] = 10
[   15.220739@3] sdio: rx_tuning_result[4] = 10
[   15.220744@3] sdio: best_win_start =3, best_win_size =4
[   15.220748@3] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x2000
[   15.220753@3] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x2000
[   15.220757@3] [sdio_reinit] finish
[   15.237158@3] bcmsdh_register: register client driver
[   15.237485@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[   15.237536@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[   15.237540@3] bus num (host idx)=0, slot num (rca)=1
[   15.237544@3] found adapter info 'DHD generic adapter'
[   15.237574@3] sdioh_attach: set sd_f2_blocksize 256
[   15.237737@3] dhdsdio_probe : no mutex held. set lock
[   15.237800@3] F1 signature read @0x18000000=0x16224335
[   15.239647@3] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
[   15.239938@3] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[   15.239989@3] wifi_platform_get_mac_addr
[   15.239994@3] ======== bcm_wlan_get_mac_address ========
[   15.239997@3] custom wifi mac is not set
[   15.240005@3] dhd_conf_set_chiprev: chip=0x4339, chiprev=1
[   15.240042@3] dhd_conf_set_conf_path_by_nv_path: config_path=/usr/lib/firmware/brcm/config.txt
[   15.240389@3] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (399 bytes) open success
[   15.242030@3] dhd_conf_read_nv_by_chip: nv_by_chip_count=12
[   15.242039@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt
[   15.242043@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt
[   15.242047@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt
[   15.242051@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt
[   15.242055@3] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
[   15.242059@3] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
[   15.242063@3] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
[   15.242067@3] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
[   15.242071@3] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt
[   15.242075@3] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt
[   15.242079@3] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359sa.txt
[   15.242083@3] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt
[   15.242139@3] dhd_conf_read_config: mimo_bw_cap = 1
[   15.242409@3] dhd_conf_read_config: bcn_timeout = 20
[   15.242506@3] dhd_conf_read_config: kso_enable = 0
[   15.242784@3] dhd_conf_read_config: PM = 0
[   15.244075@3] wl_create_event_handler(): thread:wl_event_handler:b78 started
[   15.244079@1] tsk Enter, tsk = 0xffffff8003fbb8d0
[   15.244366@3] dhd_attach(): thread:dhd_watchdog_thread:b7a started
[   15.244396@3] dhd_attach(): thread:dhd_dpc:b7b started
[   15.244427@3] dhd_attach(): thread:dhd_rxf:b7c started
[   15.244437@3] dhd_deferred_work_init: work queue initialized 
[   15.250087@3] Dongle Host Driver, version 1.363.59.144.2.git (r)
[   15.251431@3] Register interface [wlan0]  MAC: 94:a1:a2:f7:32:8f
[   15.251431@3] 
[   15.251450@1] wl_event_handler: was terminated
[   15.251538@3] dhd_open: WLAN driver is not initialized
[   15.251547@3] wl_destroy_event_handler(): thread:wl_event_handler:b78 terminated OK
[   15.251552@3] dhd_wl_ioctl: returning as busstate=0
[   15.251609@3] bcmsdh_oob_intr_unregister: Enter
[   15.251614@3] bcmsdh_oob_intr_unregister: irq is not registered
[   15.251624@3] dhd_txglom_enable: enable 0
[   15.251628@3] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
[   15.251632@3] dhd_conf_set_txglom_params: txglom_bucket_size=0
[   15.251635@3] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1
[   15.251638@3] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
[   15.251642@3] sdioh_set_mode: set txglom_mode to multi-desc
[   15.251646@3] dhd_bus_devreset:  WLAN OFF DONE
[   15.251677@3] wifi_platform_set_power = 0
[   15.251680@3] ======== PULL WL_REG_ON LOW! ========
[   15.251685@3] dhdsdio_probe : the lock is released.
[   15.251744@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[   15.251869@1] dhd_module_init: Exit err=0
[   15.280770@2] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600
[   15.280834@2] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 9600
[   15.280861@2] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200
[   16.261273@3] dhd_open: Enter ffffffc05b435800
[   16.261320@3] 
[   16.261320@3] Dongle Host Driver, version 1.363.59.144.2.git (r)
[   16.261349@3] wl_android_wifi_on in 1
[   16.261368@3] wl_android_wifi_on in 2: g_wifi_on=0
[   16.261388@3] wifi_platform_set_power = 1
[   16.261405@3] ======== PULL WL_REG_ON HIGH! ========
[   16.261467@3] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI  Disable! 234
[   16.461543@3] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI  Enable! 234
[   16.971256@3] sdio_reset_comm():
[   16.999328@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   17.101549@3] sdio: clk 200000000 SDR mode tuning start
[   17.101883@3] sdio: rx_tuning_result[0] = 10
[   17.102199@3] sdio: rx_tuning_result[1] = 10
[   17.102547@3] sdio: rx_tuning_result[3] = 10
[   17.102861@3] sdio: rx_tuning_result[4] = 10
[   17.102873@3] sdio: best_win_start =3, best_win_size =4
[   17.102885@3] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x2000
[   17.102898@3] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x2000
[   17.102969@3] sdioh_start: set sd_f2_blocksize 256
[   17.103458@3] 
[   17.103458@3] 
[   17.103458@3] dhd_bus_devreset: == WLAN ON ==
[   17.103614@3] F1 signature read @0x18000000=0x16224335
[   17.108109@3] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x2
[   17.108870@3] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[   17.109297@3] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (399 bytes) open success
[   17.110274@3] dhd_conf_read_nv_by_chip: nv_by_chip_count=12
[   17.110289@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt
[   17.110302@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt
[   17.110314@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt
[   17.110327@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt
[   17.110339@3] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
[   17.110352@3] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
[   17.110364@3] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
[   17.110376@3] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
[   17.110388@3] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt
[   17.110400@3] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt
[   17.110413@3] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359sa.txt
[   17.110425@3] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt
[   17.110593@3] dhd_conf_read_config: mimo_bw_cap = 1
[   17.111462@3] dhd_conf_read_config: bcn_timeout = 20
[   17.111758@3] dhd_conf_read_config: kso_enable = 0
[   17.112609@3] dhd_conf_read_config: PM = 0
[   17.113054@3] dhd_conf_set_fw_name_by_chip: firmware_path=/usr/lib/firmware/brcm/fw_bcm4339a0_ag.bin
[   17.113065@3] dhd_conf_set_nv_name_by_chip: nvram_path=/usr/lib/firmware/brcm/nvram_ap6335.txt
[   17.113077@3] dhdsdio_download_firmware: set use_rxchain 0
[   17.113086@3] dhdsdio_download_firmware: set txglomsize 36
[   17.113101@3] Final fw_path=/usr/lib/firmware/brcm/fw_bcm4339a0_ag.bin
[   17.113109@3] Final nv_path=/usr/lib/firmware/brcm/nvram_ap6335.txt
[   17.113118@3] Final conf_path=/usr/lib/firmware/brcm/config.txt
[   17.113907@3] dhd_os_open_image: /usr/lib/firmware/brcm/fw_bcm4339a0_ag.bin (543862 bytes) open success
[   17.181246@3] dhd_os_open_image: /usr/lib/firmware/brcm/nvram_ap6335.txt (2276 bytes) open success
[   17.182243@3] NVRAM version: AP6335_NVRAM_V1.5_03112014
[   17.182575@3] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[   17.361010@3] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[   17.361834@3] bcmsdh_oob_intr_register: Enter
[   17.361859@3] bcmsdh_oob_intr_register: HW_OOB enabled
[   17.361880@3] bcmsdh_oob_intr_register OOB irq=100 flags=0x414
[   17.361898@3] bcmsdh_oob_intr_register change flags to 0x4
[   17.361951@3] bcmsdh_oob_intr_register: disable_irq_wake
[   17.363788@3] Disable tdls_auto_op failed. -1
[   17.363793@3] dhd_conf_set_fw_int_cmd: set WLC_SET_BAND 142 0
[   17.363915@3] dhd_preinit_ioctls: Set tcpack_sup_mode 0
[   17.363928@3] wifi_platform_get_mac_addr
[   17.363932@3] ======== bcm_wlan_get_mac_address ========
[   17.363935@3] custom wifi mac is not set
[   17.373183@1] Firmware up: op_mode=0x0005, MAC=94:a1:a2:f7:32:8f
[   17.373189@1] dhd_conf_set_country: set country SG, revision 0
[   17.419342@1] Country code: SG (SG/0)
[   17.419492@1] dhd_conf_set_fw_string_cmd: set roam_off 1
[   17.421122@1] dhd_conf_set_fw_string_cmd: set mimo_bw_cap 1
[   17.429225@1] dhd_preinit_ioctls event_msgs_ext not support or version mismatch -23
[   17.432365@1] Firmware version = wl0: Dec  6 2013 15:47:10 version 6.37.32.RC23.34.10 (r)
[   17.432372@1]   Driver: 1.363.59.144.2.git (r)
[   17.432372@1]   Firmware: wl0: Dec  6 2013 15:47:10 version 6.37.32.RC23.34.10 (r) 
[   17.432512@1] dhd_txglom_enable: enable 1
[   17.432517@1] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
[   17.432520@1] dhd_conf_set_txglom_params: txglom_bucket_size=0
[   17.432524@1] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=36, bus_txglom=-1
[   17.432527@1] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
[   17.432531@1] sdioh_set_mode: set txglom_mode to multi-desc
[   17.432535@1] dhd_conf_set_disable_proptx: set disable_proptx 0
[   17.432784@1] dhd_pno_init: Support Android Location Service
[   17.432789@1] wl_android_wifi_on: Success
[   17.433181@1] wl_create_event_handler(): thread:wl_event_handler:b86 started
[   17.433195@1] tsk Enter, tsk = 0xffffff8003fbb8d0
[   17.478276@1] wl_host_event: Invalid ifidx 0 for wl0
[   17.549576@1] dhd_open: Exit ret=0
[   17.941236@0] Connecting with e0:28:6d:ed:65:d7 ssid "GRAVA", len (5) channel=116
[   17.941236@0] 
[   18.067502@0] wl_iw_event: Link UP with BSSID=e0:28:6d:ed:65:d7
[   18.067983@0] wl_bss_connect_done succeeded with e0:28:6d:ed:65:d7
[   18.232102@3] wl_bss_connect_done succeeded with e0:28:6d:ed:65:d7
[   18.911382@3] 5:3:1: cannot get freq at ep 0x82
[   18.916261@3] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-3000 (045e:0779)
[   18.916442@3] usbcore: registered new interface driver snd-usb-audio
[   18.924977@2] uvcvideo 1-1.3.1:1.0: Entity type for entity Extension 5 was not initialized!
[   18.924993@2] uvcvideo 1-1.3.1:1.0: Entity type for entity Processing 4 was not initialized!
[   18.925000@2] uvcvideo 1-1.3.1:1.0: Entity type for entity Selector 3 was not initialized!
[   18.925006@2] uvcvideo 1-1.3.1:1.0: Entity type for entity Camera 1 was not initialized!
[   18.925818@2] input: Microsoft® LifeCam HD-3000 as /devices/dwc2_b/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input7
[   18.927564@1] usbcore: registered new interface driver uvcvideo
[   18.927577@1] USB Video Class driver (1.1.1)
[   19.676453@3] 2:1:1: cannot get freq at ep 0x1
[   20.385416@2] mn88472 1-0018: downloading firmware from file 'dvb-demod-mn88472-02.fw'
[   20.544658@1] usb 1-1.2: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)
[   20.713101@0] audio_dsp: buf=0
[   20.713116@0] audio_dsp: IEC958_mode_raw=0
[   20.713168@0] audio_dsp: IEC958_mode_codec= 1, IEC958 type 2 CH PCM
[   20.713173@0] audio_dsp: last mode 0,now 1
[   20.713176@0] audio_dsp: putting chip back to PCM state
[   20.713235@0] hdmitx: config: audio_on
[   20.713272@0] audio_mute_op[2527]
[   20.713275@0] hdmitx: audio: configure on
[   20.723352@0] i2s/958 same source - init spdif
[   20.723366@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
[   20.723404@0] aml_spdif_dai: set divider = 2 for i2s shared clock
[   20.723412@0] aml_audio_hw: IEC958 PCM32
[   20.723417@0] hdmitx: audio: aout notify rate 44100
[   20.723421@0] hdmitx: audio: aout notify size 32
[   20.723425@0] hdmitx: audio: aout notify sample rate 44100 was 0
[   20.723428@0] hdmitx: audio: aout notify format CT_PCM was CT_REFER_TO_STREAM
[   20.723432@0] hdmitx: audio: aout notify sample size 4 was 0
[   20.723435@0] hdmitx: audio: aout notify channels 2 was 1
[   20.723438@0] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
[   20.723506@3] aml_snd_card: audio speaker on
[   20.733666@3] sysfs set hdmi_ch to 0
[   20.733731@3] i2s/958 same source - init spdif
[   20.733740@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
[   20.733745@3] aml_spdif_dai: set divider = 2 for i2s shared clock
[   20.733754@3] aml_audio_hw: IEC958 PCM32
[   20.733760@3] hdmitx: audio: aout notify rate 44100
[   20.733763@3] hdmitx: audio: aout notify size 32
[   20.733767@3] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
[   20.733770@3] hdmitx: audio: no update
[   20.733915@3] channel count should be 8, we got 2 aborting
[   20.795067@2] codec:vdec_create instance ffffff8004186000, total 1
[   20.858840@2] vout_serve: vmode set to null
[   20.858868@2] fb: current vmode=576cvbs, cmd: 0x50000
[   20.858875@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[   20.858880@2] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[   20.858892@2] tv_vout: 3Invalid video output modes.
[   20.858895@2] tv_vout: new mode =null set ok
[   20.858898@2] vout_serve: vinfo mode is: null
[   20.858901@2] vout_serve: new mode null set ok
[   20.858914@2] hdmitx: edid: not find mapped vic
[   20.858917@2] hdmitx: edid: not find mapped vic
[   20.858930@2] hdmitx: video: get current mode: null
[   20.858933@2] hdmitx: update physcial size: 16 9
[   20.858937@2] hdmitx: video: null not valid hdmi mode
[   20.858960@2] fb: current vmode=null, cmd: 0x10000
[   21.853157@0] hdmitx: set frac_rate_policy as 0
[   21.853278@0] vout_serve: vmode set to 576cvbs
[   21.853344@0] vout_serve: disable HDMI PHY as soon as possible
[   21.853370@0] fb: current vmode=null, cmd: 0x50000
[   21.853397@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=7
[   21.853422@0] tv_vout: mode is 7,sync_duration_den=1,sync_duration_num=50
[   21.853459@0] tv_vout: TV mode 576cvbs selected.
[   21.853482@0] 
[   21.853482@0] vdac_enable: on:0,module_sel:8
[   21.853524@0] enc_clk_config: mode is: 7
[   21.853543@0] enc_clk_config: config HPLL
[   21.853661@0] enc_clk_config: config HPLL done
[   22.359137@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000
[   22.374759@0] Bluetooth: HCI UART driver ver 2.2
[   22.374781@0] Bluetooth: HCI H4 protocol initialized
[   22.374791@0] Bluetooth: HCI BCSP protocol initialized
[   22.374800@0] Bluetooth: HCILL protocol initialized
[   22.374809@0] Bluetooth: HCIATH3K protocol initialized
[   22.374818@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[   22.476108@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.476119@0] Bluetooth: BNEP filters: protocol multicast
[   22.476143@0] Bluetooth: BNEP socket layer initialized
[   22.863290@0] tv_vout: vdac open.0 = 0x1, 0x0
[   22.863303@0] 
[   22.863303@0] vdac_enable: on:1,module_sel:8
[   22.863316@0] tv_vout: new mode =576cvbs set ok
[   22.863319@0] vout_serve: vinfo mode is: 576cvbs
[   22.863323@0] vout_serve: new mode 576cvbs set ok
[   22.863341@0] hdmitx: edid: not find mapped vic
[   22.863344@0] hdmitx: edid: not find mapped vic
[   22.863354@0] hdmitx: video: get current mode: 576cvbs
[   22.863358@0] hdmitx: update physcial size: 4 3
[   22.863362@0] hdmitx: video: 576cvbs not valid hdmi mode
[   22.863464@0] fb: current vmode=576cvbs, cmd: 0x10000
[   22.966256@2] fb: osd[0] enable: 1 (kodi.bin)
[   25.744774@3] aml_snd_card: audio speaker off
[   48.519829@0] hdmitx: system: irq 2
[   48.845533@3] hdmitx: plugin
[   48.902996@3] EDID Parser:
[   48.912426@3] hdmitx: get dtd0 vic: 16
[   48.912440@3] hdmitx: get dtd1 vic: 4
[   48.912467@3] hdmitx: get dtd2 vic: 5
[   48.912472@3] hdmitx: edid: find IEEEOUT
[   48.912479@3] hdmitx: edid: check sum valid
[   48.912484@3] hdmitx: edid: check sum valid
[   48.912494@3] hdmitx: edid: check sum valid
[   48.912498@3] hdmitx: edid: check sum valid
[   48.912505@3] hdmitx: edid: blk0 raw data
[   48.912551@3] 00ffffffffffff001e6d01000101010101140103801009780aee91a3544c9926
[   48.912551@3] 0f5054a10800714f8180010101010101010101010101023a801871382d40582c
[   48.912551@3] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd003a
[   48.912551@3] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001d7
[   48.912551@3] 
[   48.912551@3] 
[   48.912567@3] hdmitx: edid: blk1 raw data
[   48.912612@3] 020337f14e101f8413051403021220212215012615075009570778030c003000
[   48.912612@3] b82d20c00e01400a3c08101810981058103810e3050301011d8018711c162058
[   48.912612@3] 2c2500a05a0000009e011d008051d01a206e885500a05a0000001a023a801871
[   48.912612@3] 382d40582c4500a05a0000001e000000000000000000000000000000000000ab
[   48.912612@3] 
[   48.912612@3] 
[   48.912652@3] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   48.912664@3] hdmitx: video: get current mode: 576cvbs
[   48.912670@3] hdmitx: update physcial size: 160 90
[   48.912675@3] hdmitx: video: 576cvbs not valid hdmi mode
[   48.912707@3] hdmtix: setting audio 1
[   48.912720@3] hdmitx tx_aud_src = 0
[   48.912749@3] hdmitx: audio: Audio Type: PCM  Audio Channels: 2, Speaker layout: 0x0
[   48.912754@3] hdmitx: audio: Audio Output Channels set to: 0:0
[   48.912766@3] hdmitx: fs = 2, cd = 4, tmds_clk = 0
[   48.912771@3] hdmitx aud_n_para = 6272
[   48.912795@3] hdmitx set channel status, sample rate 2
[   53.611242@0] hdmitx: system: irq 4
[   53.611278@0] hdmitx: plugout
[   53.611292@0] hdmitx: system: unmux DDC for gpio read edid
[   53.611298@0] hdmitx: clear RX hdr info
[   59.000883@0] hdmitx: system: irq 2
[   59.330093@2] hdmitx: plugin
[   59.386007@2] EDID Parser:
[   59.386047@2] hdmitx: get dtd0 vic: 16
[   59.386051@2] hdmitx: get dtd1 vic: 4
[   59.386067@2] hdmitx: get dtd2 vic: 5
[   59.386071@2] hdmitx: edid: find IEEEOUT
[   59.386078@2] hdmitx: edid: check sum valid
[   59.386081@2] hdmitx: edid: check sum valid
[   59.386088@2] hdmitx: edid: check sum valid
[   59.386091@2] hdmitx: edid: check sum valid
[   59.386096@2] hdmitx: edid: blk0 raw data
[   59.386126@2] 00ffffffffffff001e6d01000101010101140103801009780aee91a3544c9926
[   59.386126@2] 0f5054a10800714f8180010101010101010101010101023a801871382d40582c
[   59.386126@2] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd003a
[   59.386126@2] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001d7
[   59.386126@2] 
[   59.386126@2] 
[   59.386136@2] hdmitx: edid: blk1 raw data
[   59.386166@2] 020337f14e101f8413051403021220212215012615075009570778030c003000
[   59.386166@2] b82d20c00e01400a3c08101810981058103810e3050301011d8018711c162058
[   59.386166@2] 2c2500a05a0000009e011d008051d01a206e885500a05a0000001a023a801871
[   59.386166@2] 382d40582c4500a05a0000001e000000000000000000000000000000000000ab
[   59.386166@2] 
[   59.386166@2] 
[   59.386192@2] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   59.386204@2] hdmitx: video: get current mode: 576cvbs
[   59.386208@2] hdmitx: update physcial size: 160 90
[   59.386211@2] hdmitx: video: 576cvbs not valid hdmi mode
[   59.386234@2] hdmtix: setting audio 1
[   59.386244@2] hdmitx tx_aud_src = 0
[   59.386264@2] hdmitx: audio: Audio Type: PCM  Audio Channels: 2, Speaker layout: 0x0
[   59.386267@2] hdmitx: audio: Audio Output Channels set to: 0:0
[   59.386276@2] hdmitx: fs = 2, cd = 4, tmds_clk = 0
[   59.386279@2] hdmitx aud_n_para = 6272
[   59.386298@2] hdmitx set channel status, sample rate 2
[   61.979849@0] hdmitx: system: irq 4
[   61.979880@0] hdmitx: plugout
[   61.979894@0] hdmitx: system: unmux DDC for gpio read edid
[   61.979900@0] hdmitx: clear RX hdr info
[   64.111808@0] hdmitx: system: irq 2
[   64.432259@3] hdmitx: plugin
[   64.486644@3] EDID Parser:
[   64.486701@3] hdmitx: get dtd0 vic: 16
[   64.486706@3] hdmitx: get dtd1 vic: 4
[   64.486723@3] hdmitx: get dtd2 vic: 5
[   64.486727@3] hdmitx: edid: find IEEEOUT
[   64.486731@3] hdmitx: edid: check sum valid
[   64.486734@3] hdmitx: edid: check sum valid
[   64.486741@3] hdmitx: edid: check sum valid
[   64.486744@3] hdmitx: edid: check sum valid
[   64.486747@3] hdmitx: edid: blk0 raw data
[   64.486778@3] 00ffffffffffff001e6d01000101010101140103801009780aee91a3544c9926
[   64.486778@3] 0f5054a10800714f8180010101010101010101010101023a801871382d40582c
[   64.486778@3] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd003a
[   64.486778@3] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001d7
[   64.486778@3] 
[   64.486778@3] 
[   64.486788@3] hdmitx: edid: blk1 raw data
[   64.486818@3] 020337f14e101f8413051403021220212215012615075009570778030c003000
[   64.486818@3] b82d20c00e01400a3c08101810981058103810e3050301011d8018711c162058
[   64.486818@3] 2c2500a05a0000009e011d008051d01a206e885500a05a0000001a023a801871
[   64.486818@3] 382d40582c4500a05a0000001e000000000000000000000000000000000000ab
[   64.486818@3] 
[   64.486818@3] 
[   64.486847@3] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   64.486855@3] hdmitx: video: get current mode: 576cvbs
[   64.486859@3] hdmitx: update physcial size: 160 90
[   64.486863@3] hdmitx: video: 576cvbs not valid hdmi mode
[   64.486886@3] hdmtix: setting audio 1
[   64.486897@3] hdmitx tx_aud_src = 0
[   64.486916@3] hdmitx: audio: Audio Type: PCM  Audio Channels: 2, Speaker layout: 0x0
[   64.486920@3] hdmitx: audio: Audio Output Channels set to: 0:0
[   64.486928@3] hdmitx: fs = 2, cd = 4, tmds_clk = 0
[   64.486932@3] hdmitx aud_n_para = 6272
[   64.486951@3] hdmitx set channel status, sample rate 2
[   66.983426@0] cectx aocec: cec_ll_tx(): tx timeout
[   67.089273@0] hdmitx: system: irq 4
[   67.089571@0] hdmitx: plugout
[   67.089585@0] hdmitx: system: unmux DDC for gpio read edid
[   67.089591@0] hdmitx: clear RX hdr info
[   68.765821@3] 2:1:1: cannot get freq at ep 0x1
[   69.092488@2] audio_dsp: buf=0
[   69.092500@2] audio_dsp: IEC958_mode_raw=0
[   69.092528@2] audio_dsp: IEC958_mode_codec= 1, IEC958 type 2 CH PCM
[   69.092532@2] audio_dsp: last mode 1,now 1
[   69.092539@2] audio_dsp: putting chip back to PCM state
[   69.092587@2] hdmitx: config: audio_on
[   69.092594@2] hdmitx: audio: configure on
[   69.102574@2] i2s/958 same source - init spdif
[   69.102589@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
[   69.102595@2] aml_spdif_dai: set divider = 2 for i2s shared clock
[   69.102603@2] aml_audio_hw: IEC958 PCM32
[   69.102609@2] hdmitx: audio: aout notify rate 44100
[   69.102612@2] hdmitx: audio: aout notify size 32
[   69.102617@2] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
[   69.102620@2] hdmitx: audio: no update
[   69.102693@1] aml_snd_card: audio speaker on
[   69.104428@1] sysfs set hdmi_ch to 0
[   69.104482@1] i2s/958 same source - init spdif
[   69.104488@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1), stream format=1
[   69.104493@1] aml_spdif_dai: set divider = 2 for i2s shared clock
[   69.104501@1] aml_audio_hw: IEC958 PCM32
[   69.104507@1] hdmitx: audio: aout notify rate 44100
[   69.104510@1] hdmitx: audio: aout notify size 32
[   69.104513@1] hdmitx: audio: hdmi_ch: 0 speaker_layout: 0
[   69.104516@1] hdmitx: audio: no update
[   69.104633@1] channel count should be 8, we got 2 aborting
[   69.117804@0] hdmitx: system: irq 2
[   69.143978@3] codec:vdec_create instance ffffff80043e0000, total 1
[   69.205121@0] vout_serve: vmode set to null
[   69.205152@0] vout_serve: disable HDMI PHY as soon as possible
[   69.205161@0] fb: current vmode=576cvbs, cmd: 0x50000
[   69.205170@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[   69.205177@0] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[   69.205190@0] tv_vout: 3Invalid video output modes.
[   69.205195@0] tv_vout: new mode =null set ok
[   69.205200@0] vout_serve: vinfo mode is: null
[   69.205205@0] vout_serve: new mode null set ok
[   69.205219@0] hdmitx: edid: not find mapped vic
[   69.205224@0] hdmitx: edid: not find mapped vic
[   69.205235@0] hdmitx: video: get current mode: null
[   69.205240@0] hdmitx: update physcial size: 16 9
[   69.205245@0] hdmitx: video: null not valid hdmi mode
[   69.205273@0] fb: current vmode=null, cmd: 0x10000
[   69.444377@0] hdmitx: plugin
[   69.506570@0] EDID Parser:
[   69.506614@0] hdmitx: get dtd0 vic: 16
[   69.506617@0] hdmitx: get dtd1 vic: 4
[   69.506635@0] hdmitx: get dtd2 vic: 5
[   69.506637@0] hdmitx: edid: find IEEEOUT
[   69.506641@0] hdmitx: edid: check sum valid
[   69.506642@0] hdmitx: edid: check sum valid
[   69.506649@0] hdmitx: edid: check sum valid
[   69.506650@0] hdmitx: edid: check sum valid
[   69.506653@0] hdmitx: edid: blk0 raw data
[   69.506696@0] 00ffffffffffff001e6d01000101010101140103801009780aee91a3544c9926
[   69.506696@0] 0f5054a10800714f8180010101010101010101010101023a801871382d40582c
[   69.506696@0] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd003a
[   69.506696@0] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001d7
[   69.506696@0] 
[   69.506696@0] 
[   69.506698@0] hdmitx: edid: blk1 raw data
[   69.506741@0] 020337f14e101f8413051403021220212215012615075009570778030c003000
[   69.506741@0] b82d20c00e01400a3c08101810981058103810e3050301011d8018711c162058
[   69.506741@0] 2c2500a05a0000009e011d008051d01a206e885500a05a0000001a023a801871
[   69.506741@0] 382d40582c4500a05a0000001e000000000000000000000000000000000000ab
[   69.506741@0] 
[   69.506741@0] 
[   69.506760@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   69.506768@0] hdmitx: video: get current mode: null
[   69.506771@0] hdmitx: update physcial size: 160 90
[   69.506773@0] hdmitx: video: null not valid hdmi mode
[   69.506796@0] hdmtix: setting audio 1
[   69.506806@0] hdmitx tx_aud_src = 0
[   69.506828@0] hdmitx: audio: Audio Type: PCM  Audio Channels: 2, Speaker layout: 0x0
[   69.506830@0] hdmitx: audio: Audio Output Channels set to: 0:0
[   69.506838@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0
[   69.506840@0] hdmitx aud_n_para = 6272
[   69.506860@0] hdmitx set channel status, sample rate 2
[   70.205045@0] hdmitx: set frac_rate_policy as 0
[   70.205101@0] vout_serve: vmode set to 576cvbs
[   70.205137@0] vout_serve: disable HDMI PHY as soon as possible
[   70.205150@0] fb: current vmode=null, cmd: 0x50000
[   70.205165@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=7
[   70.205177@0] tv_vout: mode is 7,sync_duration_den=1,sync_duration_num=50
[   70.205197@0] tv_vout: TV mode 576cvbs selected.
[   70.205209@0] 
[   70.205209@0] vdac_enable: on:0,module_sel:8
[   70.205231@0] enc_clk_config: mode is: 7
[   70.205241@0] enc_clk_config: config HPLL
[   70.205345@0] enc_clk_config: config HPLL done
[   71.215112@0] tv_vout: vdac open.0 = 0x1, 0x0
[   71.215134@0] 
[   71.215134@0] vdac_enable: on:1,module_sel:8
[   71.215162@0] tv_vout: new mode =576cvbs set ok
[   71.215172@0] vout_serve: vinfo mode is: 576cvbs
[   71.215183@0] vout_serve: new mode 576cvbs set ok
[   71.215211@0] hdmitx: edid: not find mapped vic
[   71.215230@0] hdmitx: video: get current mode: 576cvbs
[   71.215241@0] hdmitx: update physcial size: 160 90
[   71.215250@0] hdmitx: video: 576cvbs not valid hdmi mode
[   71.215298@0] fb: current vmode=576cvbs, cmd: 0x10000
[   71.314010@0] fb: osd[0] enable: 1 (kodi.bin)
[   72.096412@0] hdmitx: system: irq 4
[   72.096448@0] hdmitx: plugout
[   72.096463@0] hdmitx: system: unmux DDC for gpio read edid
[   72.096469@0] hdmitx: clear RX hdr info
[   74.116362@1] aml_snd_card: audio speaker off
[   74.127729@0] hdmitx: system: irq 2
[   74.456409@1] hdmitx: plugin
[   74.511850@1] EDID Parser:
[   74.511986@1] hdmitx: get dtd0 vic: 16
[   74.511991@1] hdmitx: get dtd1 vic: 4
[   74.512013@1] hdmitx: get dtd2 vic: 5
[   74.512017@1] hdmitx: edid: find IEEEOUT
[   74.512022@1] hdmitx: edid: check sum valid
[   74.512024@1] hdmitx: edid: check sum valid
[   74.512032@1] hdmitx: edid: check sum valid
[   74.512035@1] hdmitx: edid: check sum valid
[   74.512039@1] hdmitx: edid: blk0 raw data
[   74.512069@1] 00ffffffffffff001e6d01000101010101140103801009780aee91a3544c9926
[   74.512069@1] 0f5054a10800714f8180010101010101010101010101023a801871382d40582c
[   74.512069@1] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd003a
[   74.512069@1] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001d7
[   74.512069@1] 
[   74.512069@1] 
[   74.512080@1] hdmitx: edid: blk1 raw data
[   74.512110@1] 020337f14e101f8413051403021220212215012615075009570778030c003000
[   74.512110@1] b82d20c00e01400a3c08101810981058103810e3050301011d8018711c162058
[   74.512110@1] 2c2500a05a0000009e011d008051d01a206e885500a05a0000001a023a801871
[   74.512110@1] 382d40582c4500a05a0000001e000000000000000000000000000000000000ab
[   74.512110@1] 
[   74.512110@1] 
[   74.512139@1] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   74.512148@1] hdmitx: video: get current mode: 576cvbs
[   74.512153@1] hdmitx: update physcial size: 160 90
[   74.512156@1] hdmitx: video: 576cvbs not valid hdmi mode
[   74.512181@1] hdmtix: setting audio 1
[   74.512192@1] hdmitx tx_aud_src = 0
[   74.512213@1] hdmitx: audio: Audio Type: PCM  Audio Channels: 2, Speaker layout: 0x0
[   74.512217@1] hdmitx: audio: Audio Output Channels set to: 0:0
[   74.512225@1] hdmitx: fs = 2, cd = 4, tmds_clk = 0
[   74.512230@1] hdmitx aud_n_para = 6272
[   74.512250@1] hdmitx set channel status, sample rate 2
[   76.137940@0] hdmitx: system: irq 4
[   76.137972@0] hdmitx: plugout
[   76.137987@0] hdmitx: system: unmux DDC for gpio read edid
[   76.137993@0] hdmitx: clear RX hdr info
[   88.167513@0] hdmitx: system: irq 2
[   88.501949@0] hdmitx: plugin
[   88.556766@0] EDID Parser:
[   88.556828@0] hdmitx: get dtd0 vic: 16
[   88.556832@0] hdmitx: get dtd1 vic: 4
[   88.556849@0] hdmitx: get dtd2 vic: 5
[   88.556853@0] hdmitx: edid: find IEEEOUT
[   88.556858@0] hdmitx: edid: check sum valid
[   88.556861@0] hdmitx: edid: check sum valid
[   88.556867@0] hdmitx: edid: check sum valid
[   88.556871@0] hdmitx: edid: check sum valid
[   88.556875@0] hdmitx: edid: blk0 raw data
[   88.556905@0] 00ffffffffffff001e6d01000101010101140103801009780aee91a3544c9926
[   88.556905@0] 0f5054a10800714f8180010101010101010101010101023a801871382d40582c
[   88.556905@0] 4500a05a0000001e011d007251d01e206e285500a05a0000001e000000fd003a
[   88.556905@0] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001d7
[   88.556905@0] 
[   88.556905@0] 
[   88.556917@0] hdmitx: edid: blk1 raw data
[   88.556947@0] 020337f14e101f8413051403021220212215012615075009570778030c003000
[   88.556947@0] b82d20c00e01400a3c08101810981058103810e3050301011d8018711c162058
[   88.556947@0] 2c2500a05a0000009e011d008051d01a206e885500a05a0000001a023a801871
[   88.556947@0] 382d40582c4500a05a0000001e000000000000000000000000000000000000ab
[   88.556947@0] 
[   88.556947@0] 
[   88.556977@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[   88.556986@0] hdmitx: video: get current mode: 576cvbs
[   88.556989@0] hdmitx: update physcial size: 160 90
[   88.556993@0] hdmitx: video: 576cvbs not valid hdmi mode
[   88.557017@0] hdmtix: setting audio 1
[   88.557028@0] hdmitx tx_aud_src = 0
[   88.557048@0] hdmitx: audio: Audio Type: PCM  Audio Channels: 2, Speaker layout: 0x0
[   88.557052@0] hdmitx: audio: Audio Output Channels set to: 0:0
[   88.557061@0] hdmitx: fs = 2, cd = 4, tmds_clk = 0
[   88.557065@0] hdmitx aud_n_para = 6272
[   88.557084@0] hdmitx set channel status, sample rate 2
[   94.483461@0] hdmitx: system: irq 4
[   94.483511@0] hdmitx: plugout
[   94.483530@0] hdmitx: system: unmux DDC for gpio read edid
[   94.483542@0] hdmitx: clear RX hdr info

