[ 0.000000@0] Booting Linux on physical CPU 0x200 [ 0.000000@0] Linux version 3.10.108 (user@CompileServer) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Tue Aug 21 08:39:28 MSK 2018 [ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC [ 0.000000@0] physical memory start address is 0x200000 [ 0.000000@0] reserved_end is d9fffff [ 0.000000@0] [ 0.000000@0] Total memory is 2046 MiB [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0d9fffff, size: 122 MiB [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB) [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB) [ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB) [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB) [ 0.000000@0] vdec0(high) : 0x79f00000 - 0x7df00000 ( 64 MiB) [ 0.000000@0] ppmgr0(high) : 0x77f00000 - 0x79f00000 ( 32 MiB) [ 0.000000@0] vdin00(low) : 0x09a00000 - 0x0aa00000 ( 16 MiB) [ 0.000000@0] vdin10(low) : 0x0aa00000 - 0x0ba00000 ( 16 MiB) [ 0.000000@0] amlvideo20(low) : 0x0ba00000 - 0x0d200000 ( 24 MiB) [ 0.000000@0] amvideocap0(low) : 0x0d200000 - 0x0da00000 ( 8 MiB) [ 0.000000@0] get storage device: storage 4 [ 0.000000@0] value=4 [ 0.000000@0] get_storage_device : get storage device: storage 4 [ 0.000000@0] get_storage_device : value=4 [ 0.000000@0] [get_storage_device] storage_flag=4 [ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=4 [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000@0] On node 0 totalpages: 455936 [ 0.000000@0] free_area_init_node: node 0, pgdat c09aba00, node_mem_map c0be3000 [ 0.000000@0] Normal zone: 1520 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 159744 pages, LIFO batch:31 [ 0.000000@0] HighMem zone: 2314 pages used for memmap [ 0.000000@0] HighMem zone: 296192 pages, LIFO batch:31 [ 0.000000@0] Meson chip version = RevC (19:C - 0:27ED) [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1af2000 s7552 r8192 d12928 u32768 [ 0.000000@0] pcpu-alloc: s7552 r8192 d12928 u32768 alloc=8*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454416 [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=4 cvbsdrv=0 vdaccfg=0xa005 logo=osd1,loaded,0x15100000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=0 hdmitx= [ 0.000000@0] cvbs performance line = 0 [ 0.000000@0] cvbs trimming line = 0xa005 [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x5 [ 0.000000@0] osd1:1 [ 0.000000@0] loaded:268435459 [ 0.000000@0] logo has been loaded [ 0.000000@0] 720p:11 [ 0.000000@0] full:2 [ 0.000000@0] kernel get hdmimode form uboot is 720p [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000@0] Memory: 64MB 16MB 1701MB = 1781MB total [ 0.000000@0] Memory: 1790808k/1790808k available, 32936k reserved, 1184768K highmem [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000@0] .text : 0xc0008000 - 0xc090d34c (9237 kB) [ 0.000000@0] .init : 0xc090e000 - 0xc0941d80 ( 208 kB) [ 0.000000@0] .data : 0xc0942000 - 0xc09ac898 ( 427 kB) [ 0.000000@0] .bss : 0xc09ac898 - 0xc0bdeaa4 (2249 kB) [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] NR_IRQS:256 [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000@0] Global timer: MESON TIMER-F (c095d2c0) initialized [ 0.000000@0] Switching to timer-based delay loop [ 0.000000@0] Console: colour dummy device 80x30 [ 0.000000@0] meson_serial_console_setup [ 0.000000@0] console [ttyS0] enabled [ 0.371943@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.382242@0] pid_max: default: 32768 minimum: 301 [ 0.387142@0] Mount-cache hash table entries: 512 [ 0.395330@0] CPU: Testing write buffer coherency: ok [ 0.397008@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.402607@0] Setting up static identity map for 0xc0686970 - 0xc06869c8 [ 0.409292@0] L310 cache controller enabled [ 0.413378@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B [ 0.420889@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000 [ 0.429031@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222 [ 0.490134@0] write pen_release: 1 [ 0.490498@1] CPU1: Booted secondary processor [ 0.490512@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.510121@0] write pen_release: 2 [ 0.518424@2] CPU2: Booted secondary processor [ 0.518437@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.530118@0] write pen_release: 3 [ 0.538419@3] CPU3: Booted secondary processor [ 0.538433@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.538491@0] Brought up 4 CPUs [ 0.551468@0] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.557699@0] CPU: All CPU(s) started in SVC mode. [ 0.562881@0] devtmpfs: initialized [ 0.570002@0] clkrate [ xtal ] : 24000000 [ 0.570040@0] clkrate [ pll_sys ] : 1200000000 [ 0.574516@0] clkrate [ pll_fixed ] : 2550000000 [ 0.579196@0] clkrate [ pll_vid ] : 732000000 [ 0.583621@0] TODO: clk_get_rate_hpll() is not implement in M8 now [ 0.589771@0] clkrate [ pll_hpll ] : 0 [ 0.593589@0] clkrate [ pll_ddr ] : 0 [ 0.597313@0] clkrate [ a9_clk ] : 1200000000 [ 0.601738@0] clkrate [ clk81 ] : 141666666 [ 0.606560@0] pinctrl core: initialized pinctrl subsystem [ 0.611632@0] regulator-dummy: no parameters [ 0.615781@0] NET: Registered protocol family 16 [ 0.626132@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.629045@0] VPU driver version: v03 [ 0.631281@0] vpu driver detect cpu type: m8 [ 0.635516@0] load vpu_clk in dts: 364300000Hz(7) [ 0.640257@0] vpu_probe OK [ 0.647100@0] amlogic_gpio gpio: Probed amlogic GPIO driver [ 0.648873@0] register lm device lm-root [ 0.652411@0] register lm device lm1 [ 0.655949@0] register lm device lm0 [ 0.659649@0] Init pinux probe! [ 0.662993@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver [ 0.668449@0] -------early_init_dt_init:115---------- [ 0.673315@0] tv_init_module [ 0.676177@0] major number 254 for disp [ 0.679982@0] vout_register_server [ 0.683368@0] register tv module server ok [ 0.687524@0] aml_i2c version: 20140813 [ 0.691300@0] plat->state_name:default [ 0.691311@0] master_no = 0, master_regs=fe600500 [ 0.691437@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef3908a8) [ 0.697321@0] aml-i2c i2c-AO: aml i2c bus driver. [ 0.702074@0] plat->state_name:default [ 0.702085@0] master_no = 1, master_regs=fe108500 [ 0.702176@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ef390ca8) [ 0.707982@0] aml-i2c i2c-A: aml i2c bus driver. [ 0.712647@0] plat->state_name:default [ 0.712656@0] master_no = 2, master_regs=fe1087c0 [ 0.712771@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ef3910a8) [ 0.718557@0] aml-i2c i2c-B: aml i2c bus driver. [ 0.723232@0] plat->state_name:default [ 0.723242@0] master_no = 3, master_regs=fe1087e0 [ 0.723328@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ef3914a8) [ 0.729132@0] aml-i2c i2c-C: aml i2c bus driver. [ 0.733867@0] aml_pmu_init, 458 [ 0.736898@0] call aml_dvfs_init in [ 0.740362@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs [ 0.740370@0] [DVFS]dvfs table of vcck_dvfs is: [ 0.740375@0] [DVFS] freq, min_uV, max_uV [ 0.740380@0] [DVFS] 96000, 825000, 825000 [ 0.740384@0] [DVFS] 192000, 825000, 825000 [ 0.740388@0] [DVFS] 312000, 825000, 825000 [ 0.740392@0] [DVFS] 408000, 825000, 825000 [ 0.740396@0] [DVFS] 504000, 825000, 825000 [ 0.740400@0] [DVFS] 600000, 850000, 850000 [ 0.740404@0] [DVFS] 720000, 850000, 850000 [ 0.740408@0] [DVFS] 816000, 875000, 875000 [ 0.740412@0] [DVFS] 1008000, 925000, 925000 [ 0.740416@0] [DVFS] 1200000, 975000, 975000 [ 0.740420@0] [DVFS] 1416000, 1025000, 1025000 [ 0.740424@0] [DVFS] 1608000, 1100000, 1100000 [ 0.740428@0] [DVFS] 1800000, 1125000, 1125000 [ 0.740432@0] [DVFS] 1992000, 1150000, 1150000 [ 0.740574@0] hdmitx: system: amhdmitx_init [ 0.744474@0] hdmitx: system: Ver: 2014May6 [ 0.748687@0] hdmitx: system: amhdmitx_probe [ 0.753074@0] hdmitx: system: not find ao cec [ 0.757215@0] hdmitx: system: not find vend_init_data [ 0.762383@0] hdmitx: system: gate/pwr cmd: 7 [ 0.766579@0] hdmitx: system: ALREADY init VIC = 4 [ 0.771351@0] hdmitx: system: gate/pwr cmd: 0 [ 0.776054@3] hdmitx: system: reset intr mask [ 0.808456@0] hdmitx: system: irq 1 [ 0.819167@0] bio: create slab at 0 [ 0.819892@0] SCSI subsystem initialized [ 0.821933@0] usbcore: registered new interface driver usbfs [ 0.827329@0] usbcore: registered new interface driver hub [ 0.832797@0] usbcore: registered new device driver usb [ 0.838129@0] Linux video capture interface: v2.00 [ 0.842931@0] pps_core: LinuxPPS API ver. 1 registered [ 0.847790@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.857125@0] PTP clock support registered [ 0.861604@0] mode is 11,sync_duration_den=1,sync_duration_num=60 [ 0.867211@0] TV mode 720p selected. [ 0.870775@0] already display in uboot [ 0.874488@0] vinfo mode is: 720p [ 0.879917@0] call aml_pmu_probe_init in [ 0.881769@0] aml_pmus_probe, child name:rn5t618 [ 0.886283@0] aml_pmus_probe, i2c_bus:i2c_bus_ao [ 0.891208@0] board_has_battery:false [ 0.894515@0] [DVFS]aml_dvfs_register_driver, driver rn5t618-dvfs regist success, mask:7, source id:1 [ 0.894522@0] [RN5T618]ricoh_pmu_probe, 287 [ 0.895315@0] [RN5T618]coulomb_flag:0x20 [ 0.895319@0] [RN5T618]no saved coulomb counter [ 0.895414@0] ricoh_pmu_probe, 302 [ 0.895422@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu [ 0.903495@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.910301@0] Switching to clocksource Timer-E [ 0.913921@0] FS-Cache: Loaded [ 0.918801@3] hdmitx: system: gate/pwr cmd: 4 [ 0.924828@0] NET: Registered protocol family 2 [ 0.926112@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.932906@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.939512@0] TCP: Hash tables configured (established 8192 bind 8192) [ 0.945961@0] TCP: reno registered [ 0.949299@0] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.955396@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.962017@0] NET: Registered protocol family 1 [ 0.966565@0] RPC: Registered named UNIX socket transport module. [ 0.972445@0] RPC: Registered udp transport module. [ 0.977300@0] RPC: Registered tcp transport module. [ 0.982147@0] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.988811@0] wifi_dev_probe [ 0.991598@0] wifi_dt : interrupt_pin=GPIOX_21 [ 0.996029@0] wifi_dt : irq_num=null [ 0.999571@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH [ 1.004694@0] wifi_dt : power_on_pin=GPIOAO_6 [ 1.009022@0] wifi_dt : power_on_pin2=GPIOX_11 [ 1.013443@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122 [ 1.022543@0] Unpacking initramfs... [ 1.038201@0] Freeing initrd memory: 4364K [ 1.039801@0] bounce pool size: 64 pages [ 1.046200@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.047191@0] FS-Cache: Netfs 'nfs' registered for caching [ 1.052375@0] NFS: Registering the id_resolver key type [ 1.057269@0] Key type id_resolver registered [ 1.061562@0] Key type id_legacy registered [ 1.065843@0] FS-Cache: Netfs 'cifs' registered for caching [ 1.071928@0] msgmni has been set to 1192 [ 1.076339@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.082801@0] io scheduler noop registered [ 1.086901@0] io scheduler fiops registered (default) [ 1.096105@0] loop: module loaded [ 1.097011@0] tun: Universal TUN/TAP device driver, 1.6 [ 1.100395@0] tun: (C) 1999-2004 Max Krasnyansky [ 1.107241@0] PPP generic driver version 2.4.2 [ 1.111307@0] PPP BSD Compression module registered [ 1.116009@0] PPP Deflate Compression module registered [ 1.121211@0] PPP MPPE Compression module registered [ 1.124110@3] hdmitx: system: gate/pwr cmd: 5 [ 1.124112@3] hdmitx: edid: edid ready [ 1.124113@3] hdmitx: system: gate/pwr cmd: 4 [ 1.138547@0] NET: Registered protocol family 24 [ 1.143222@0] usbcore: registered new interface driver asix [ 1.148790@0] usbcore: registered new interface driver ax88179_178a [ 1.155005@0] usbcore: registered new interface driver cdc_ether [ 1.160973@0] usbcore: registered new interface driver smsc95xx [ 1.166870@0] usbcore: registered new interface driver net1080 [ 1.172669@0] usbcore: registered new interface driver cdc_subset [ 1.178749@0] usbcore: registered new interface driver zaurus [ 1.184482@0] usbcore: registered new interface driver cdc_ncm [ 1.190278@0] usbcore: registered new interface driver qf9700 [ 1.195996@0] usbcore: registered new interface driver sr9600 [ 1.201857@0] usbcore: registered new interface driver cdc_acm [ 1.207458@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.215681@0] usbcore: registered new interface driver usb-storage [ 1.221905@0] usbcore: registered new interface driver usbserial [ 1.227809@0] usbcore: registered new interface driver usbserial_generic [ 1.234477@0] usbserial: USB Serial support registered for generic [ 1.240632@0] usbcore: registered new interface driver pl2303 [ 1.246352@0] usbserial: USB Serial support registered for pl2303 [ 1.252609@0] mousedev: PS/2 mouse device common for all mice [ 1.258976@0] usbcore: registered new interface driver iforce [ 1.264639@0] usbcore: registered new interface driver xpad [ 1.269524@0] i2c /dev entries driver [ 1.273614@0] lirc_dev: IR Remote Control driver registered, major 246 [ 1.279578@0] IR NEC protocol handler initialized [ 1.284254@0] IR RC5(x) protocol handler initialized [ 1.289192@0] IR RC6 protocol handler initialized [ 1.293875@0] IR JVC protocol handler initialized [ 1.298550@0] IR Sony protocol handler initialized [ 1.303321@0] IR RC5 (streamzap) protocol handler initialized [ 1.309045@0] IR SANYO protocol handler initialized [ 1.313898@0] IR MCE Keyboard/mouse protocol handler initialized [ 1.319877@0] IR LIRC bridge handler initialized [ 1.324566@0] usbcore: registered new interface driver ati_remote [ 1.330607@0] usbcore: registered new interface driver imon [ 1.334101@3] hdmitx: system: gate/pwr cmd: 5 [ 1.334103@3] hdmitx: edid: edid ready [ 1.334108@3] hdmitx: edid: check sum valid [ 1.334109@3] hdmitx: edid: check sum valid [ 1.334111@3] hdmitx: edid: blk0 raw data [ 1.334132@3] 00ffffffffffff001e6d0100010101010117010380a05a780aee91a3544c9926 [ 1.334150@3] 0f5054a1080031404540614071408180010101010101023a801871382d40582c [ 1.334168@3] 4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd003a [ 1.334186@3] 3e1e5310000a202020202020000000fc004c472054560a202020202020200142 [ 1.334187@3] [ 1.334189@3] hdmitx: edid: blk1 raw data [ 1.334207@3] 020333f14e109f0413051403021220212215012615075009570778030c001000 [ 1.334225@3] 801e20c00e01400a0f08101810981058103810011d8018711c1620582c250020 [ 1.334243@3] c23100009e011d007251d01e206e28550020c23100001e023a801871382d4058 [ 1.334261@3] 2c4500a05a0000001e011d00bc52d01e20b8285540c48e2100001e0000000023 [ 1.334262@3] [ 1.334300@3] hdmitx: edid: find IEEEOUT [ 1.334336@3] hdmitx: video: get current mode: 720p [ 1.334343@3] is_similar_hdmi_vic[326] vic_old=4,mode_new=11 [ 1.334346@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4 [ 1.334349@3] hdmitx: audio: audio channel num is 0 [ 1.334354@3] hdmitx: audio: SPDIF [ 1.334365@3] hdmitx: audio: current VIC: 4 [ 1.334366@3] hdmitx: audio: audio sample rate: 0 [ 1.334368@3] hdmitx: audio: set audio N para [ 1.334375@3] hdmitx: audio: PCM out to HDMI [ 1.354910@3] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL [ 1.354912@3] hdmitx: audio: i2s_to_spdif_flag:1 [ 1.354913@3] hdmitx: audio: Enable audio spdif to HDMI [ 1.354969@3] hdmi detect: plug. [ 1.486850@0] usbcore: registered new interface driver mceusb [ 1.492738@0] usbcore: registered new interface driver redrat3 [ 1.498352@0] usbcore: registered new interface driver streamzap [ 1.504267@0] Registered IR keymap rc-empty [ 1.508628@0] input: rc-core loopback device as /devices/virtual/rc/rc0/input0 [ 1.515752@0] rc0: rc-core loopback device as /devices/virtual/rc/rc0 [ 1.522217@0] input: MCE IR Keyboard/Mouse (rc-loopback) as /devices/virtual/input/input1 [ 1.530506@0] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0 [ 1.538625@0] usbcore: registered new interface driver iguanair [ 1.544383@0] usbcore: registered new interface driver ttusbir [ 1.550330@0] device-mapper: uevent: version 1.0.3 [ 1.555120@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 1.563864@0] ledtrig-cpu: registered to indicate activity on CPUs [ 1.569736@0] hidraw: raw HID events driver (C) Jiri Kosina [ 1.575433@0] usbcore: registered new interface driver usbhid [ 1.580875@0] usbhid: USB HID core driver [ 1.585242@0] zram: Created 1 device(s) ... [ 1.589326@0] ashmem: initialized [ 1.592451@0] logger: created 256K log 'log_main' [ 1.597138@0] logger: created 256K log 'log_events' [ 1.601972@0] logger: created 256K log 'log_radio' [ 1.606777@0] logger: created 256K log 'log_system' [ 1.611527@0] vout_init_module [ 1.614561@0] start init vout module [ 1.618132@0] create vout attribute ok [ 1.621994@0] ge2d_init [ 1.624314@0] ge2d_dev major:244 [ 1.627688@0] ge2d start monitor [ 1.630753@0] osd_init [ 1.630757@3] ge2d workqueue monitor start [ 1.637177@0] osd_probe, vinfo:c06d0878 [ 1.641121@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K [ 1.649105@0] osd_probe, mydef_var:c09940b0, vinfo:c06d0878 [ 1.654652@0] init fbdev bpp is :32 [ 1.658109@0] ---------------clear framebuffer0 memory [ 1.709456@0] Console: switching to colour frame buffer device 240x67 [ 1.736114@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K [ 1.741640@0] osd_probe, mydef_var:c09940b0, vinfo:c06d0878 [ 1.747198@0] don't find to display_size_default from mesonfb-dts [ 1.753257@0] init fbdev bpp is :24 [ 1.769362@0] osd probe ok [ 1.769527@0] enter aml_sysled_init [ 1.775797@0] DI: di_init [ 1.775823@0] DI: di_probe [ 1.776199@0] aml_wdt_driver_init,306 [ 1.776223@0] ** disable watchdog [ 1.777686@0] keys=========================================== [ 1.783237@0] keys_devno=f100000 [ 1.786653@0] securitykey: device aml_keys created [ 1.791218@0] amlkeys=0 [ 1.793705@0] platform_driver_register--aml_keys_driver-------------------- [ 1.800853@0] set uart_ao pinmux use pinctrl subsystem [ 1.805712@0] P_AO_RTI_PIN_MUX_REG:78005861 [ 1.809860@0] start uart_ao_ttyS0:(irq = 122) [ 1.814199@0] register uart_ao ok [ 1.817668@0] set uart_a pinmux use pinctrl subsystem [ 1.822507@0] P_AO_RTI_PIN_MUX_REG:78005861 [ 1.826696@0] start uart_a_ttyS1:(irq = 58) [ 1.830824@0] register uart_a ok [ 1.834227@0] start uart_d_ttyS4:(irq = 126) [ 1.838282@0] register uart_d ok [ 1.841616@0] dwc_otg: version 3.10a 12-MAY-2014 [ 1.846119@0] dwc_otg_driver_probe NOT match [ 1.850351@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000 [ 1.858941@0] USB (1) use clock source: XTAL input [ 1.884704@0] Core Release: 3.10a [ 1.884728@0] Setting default values for core params [ 1.887329@0] curmode: 1, host_only: 1 [ 1.911167@0] Using Buffer DMA mode [ 1.911191@0] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 1.913523@0] Working on port type = HOST [ 1.917557@0] dwc_otg lm1: DWC OTG Controller [ 1.921860@0] dwc_otg lm1: new USB bus registered, assigned bus number 1 [ 1.928553@0] dwc_otg lm1: irq 63, io mem 0x00000000 [ 1.933460@0] -------hcd->flags.d32 = 0 [ 1.937311@0] Init: Port Power? op_state=1 [ 1.941347@0] Init1: Power Port (0) [ 1.944918@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.951752@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.959140@0] usb usb1: Product: DWC OTG Controller [ 1.963989@0] usb usb1: Manufacturer: Linux 3.10.108 dwc_otg_hcd [ 1.969957@0] usb usb1: SerialNumber: lm1 [ 1.974327@0] hub 1-0:1.0: USB hub found [ 1.977848@0] hub 1-0:1.0: 1 port detected [ 1.982068@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000 [ 1.990534@0] USB (0) use clock source: XTAL input [ 2.016305@0] Core Release: 3.10a [ 2.016329@0] Setting default values for core params [ 2.018924@0] curmode: 1, host_only: 0 [ 2.082720@0] Using Buffer DMA mode [ 2.082745@0] OTG VER PARAM: 1, OTG VER FLAG: 1 [ 2.085098@0] Working on port type = OTG [ 2.088980@0] Current port type: SLAVE [ 2.092731@0] dwc_otg lm0: DWC OTG Controller [ 2.097068@0] dwc_otg lm0: new USB bus registered, assigned bus number 2 [ 2.103730@0] dwc_otg lm0: irq 62, io mem 0x00000000 [ 2.108704@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.115615@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.122961@0] usb usb2: Product: DWC OTG Controller [ 2.127829@0] usb usb2: Manufacturer: Linux 3.10.108 dwc_otg_hcd [ 2.133810@0] usb usb2: SerialNumber: lm0 [ 2.138126@0] hub 2-0:1.0: USB hub found [ 2.141686@0] hub 2-0:1.0: 1 port detected [ 2.145892@0] Dedicated Tx FIFOs mode [ 2.149481@0] using timer detect id change, ef3cd000 [ 2.154514@0] boot_device_flag : 0 [ 2.157718@0] ===========================================amlnf_init:642,nand device tree ok,dev-name:nand [ 2.167279@0] Nand PHY driver Version: 1.01.001.0006 (c) 2013 Amlogic Inc. [ 2.174129@0] amlnf_phy_init : amlnf init flag 0 [ 2.174151@2] Indeed it is in host mode hprt0 = 00021501 [ 2.184067@0] ######STS IRQ mode for nand driver [ 2.188634@0] NAND device id: 2c 64 44 4b a9 0 0 0 [ 2.193345@0] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA [ 2.226702@0] detected 2 NAND chips [ 2.226904@0] AML_NAND_NEW_OOB : new oob [ 2.228452@0] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15 [ 2.236360@0] boot_device_flag = 0 [ 2.240424@0] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0 [ 2.252170@0] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0 [ 2.256734@0] nand shipped bbt at block 6 [ 2.281181@0] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 13 [ 2.284356@0] i=0,register --- nand_key [ 2.287818@0] nand adjust phy offset : block 4 [ 2.292214@0] nand adjust phy offset : block 4 [ 2.296672@0] nfcache : offset: 0x000006000000 -0x000026000000 : partitons 1 : multi_chip multi_plane [ 2.306096@0] nfcode : offset: 0x00002c000000 -0x000076000000 : partitons 5 : multi_chip multi_plane [ 2.315540@0] nfdata : offset: 0x0000a2000000 -0x00035e000000 : partitons 1 : multi_chip multi_plane [ 2.326209@0] bad block count = 0 [ 2.326209@0] [ 2.333691@0] bad block count = 0 [ 2.333691@0] [ 2.362475@0] bad block count = 0 [ 2.362475@0] [ 2.362506@0] amlnand_add_nftl: [ 2.363801@3] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.364034@3] Indeed it is in host mode hprt0 = 00001101 [ 2.376825@0] Creating 1 ntd partitions [ 2.380608@0] block_num 76 [ 2.384638@0] ------init_ntd [ 2.386576@0] ntd: Giving out device 0 to nfcache [ 2.390923@0] Creating 5 ntd partitions [ 2.394761@0] block_num 236 [ 2.401649@0] ntd: Giving out device 1 to nfcode [ 2.402192@0] Creating 1 ntd partitions [ 2.406031@0] block_num 1724 [ 2.436940@0] ntd: Giving out device 2 to nfdata [ 2.437379@0] boot_device_flag : 0 [ 2.439295@0] register_ntd_blktrans start [ 2.443285@0] ntd device 250! [ 2.446254@0] ntd->name: nfcache [ 2.449441@0] adjust_block_num : 4,reserved_block_ratio 10 [ 2.454926@0] nftl version 140911a [ 2.458286@0] nftl part attr 0 [ 2.462533@0] size_in_blk 76; total_block 75; [ 2.465763@0] nftl start:75,12 [ 2.468927@0] first [ 2.496374@0] average_erase_count:0 [ 2.496398@0] second 5,63 [ 2.496822@0] part->max_discard_block = 4 [ 2.506348@0] all block full!! [ 2.506368@0] all discard block full!! [ 2.507571@0] free list: [ 2.510172@0] free block cnt = 70 [ 2.513465@0] new current block is 70 [ 2.517123@0] total discard page count is 0 [ 2.521271@0] create_part_list:1235,current_used_discard_block=69,current_discard_block_used_count=8 [ 2.530661@0] unmappig_pages=15692,discarded_pages=0,mapping_pages=436 [ 2.536893@0] nftl ok! [ 2.540188@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 2.544179@0] aml_nftl_add_ntd ok [ 2.547098@0] ntd device 250! [ 2.550045@0] ntd->name: nfcode [ 2.553172@0] adjust_block_num : 4,reserved_block_ratio 10 [ 2.558651@0] nftl version 140911a [ 2.562031@0] nftl part attr 0 [ 2.568842@0] nftl start:236,26 [ 2.569280@0] first [ 2.575149@3] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 2.577093@3] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.584383@3] usb 1-1: Product: USB2.0 Hub [ 2.589016@3] hub 1-1:1.0: USB hub found [ 2.592646@3] hub 1-1:1.0: 4 ports detected [ 2.643978@0] average_erase_count:3 [ 2.644003@0] second 235,210 [ 2.644686@0] part->max_discard_block = 4 [ 2.874080@3] usb 1-1.3: new low-speed USB device number 3 using dwc_otg [ 2.908415@0] current_block1:114 [ 2.943865@0] recover_current_block_mapping invalid page data!! [ 2.945273@0] recover_current_block_mapping invalid page data!! [ 2.951166@0] recover_current_block_mapping invalid page data!! [ 2.957069@0] recover_current_block_mapping invalid page data!! [ 2.962956@0] recover_current_block_mapping invalid page data!! [ 2.968865@0] recover_current_block_mapping invalid page data!! [ 2.974639@0] all discard block full!! [ 2.977308@3] usb 1-1.3: New USB device found, idVendor=6901, idProduct=2701 [ 2.977313@3] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.981396@3] input: HID 6901:2701 as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input2 [ 2.981691@3] hid-generic 0003:6901:2701.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 6901:2701] on usb-lm1-1.3/input0 [ 2.986863@3] input: HID 6901:2701 as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.1/input/input3 [ 2.987259@3] hid-generic 0003:6901:2701.0002: input,hidraw1: USB HID v1.10 Mouse [HID 6901:2701] on usb-lm1-1.3/input1 [ 3.029800@0] free list: [ 3.032295@0] free block cnt = 36 [ 3.035610@0] new current block is 111 [ 3.321234@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list! [ 3.839739@0] recover_current_block_mapping : fill the current block, from page 255 [ 3.841749@0] total discard page count is 0 [ 3.845930@0] create_part_list:1235,current_used_discard_block=26,current_discard_block_used_count=890 [ 3.856107@0] unmappig_pages=31581,discarded_pages=0,mapping_pages=22179 [ 3.861858@0] nftl ok! [ 3.865333@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 3.869236@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 3.873763@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 3.878388@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 3.882925@0] Enable QUEUE_FLAG_DISCARD for NFTL [ 3.887504@0] aml_nftl_add_ntd ok [ 3.890465@0] ntd device 250! [ 3.893411@0] ntd->name: nfdata [ 3.896555@0] adjust_block_num : 4,reserved_block_ratio 10 [ 3.901994@0] nftl version 140911a [ 3.905575@0] nftl part attr 0 [ 3.936191@0] nftl start:1724,161 [ 3.938350@0] first [ 4.477406@0] found discard block:1704 [ 4.483977@0] average_erase_count:1 [ 4.484023@0] second 1709,1563 [ 4.484858@0] part->max_discard_block = 4 [ 6.376522@0] current_block1:1475 [ 6.393140@0] recover_current_block_mapping invalid page data!! [ 6.394527@0] recover_current_block_mapping invalid page data!! [ 6.400444@0] recover_current_block_mapping invalid page data!! [ 6.406357@0] recover_current_block_mapping invalid page data!! [ 6.412218@0] recover_current_block_mapping invalid page data!! [ 6.418135@0] recover_current_block_mapping invalid page data!! [ 6.424896@0] currnet_discard_block1:1704 [ 6.561630@0] reach the last discard page:110 [ 6.566838@0] free list: [ 6.566874@0] free block cnt = 1200 [ 6.567288@0] new current block is 1474 [ 6.847977@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list! [ 7.370848@0] recover_current_block_mapping : fill the current block, from page 255 [ 7.372858@0] total discard page count is 110 [ 7.377215@0] create_part_list:1235,current_used_discard_block=1704,current_discard_block_used_count=57 [ 7.394296@0] unmappig_pages=262031,discarded_pages=122376,mapping_pages=15721 [ 7.395875@0] nftl ok! [ 7.399374@1] Enable QUEUE_FLAG_DISCARD for NFTL [ 7.403262@1] aml_nftl_add_ntd ok [ 7.406125@1] init_aml_nftl end [ 7.409369@1] ethernet_driver probe! [ 7.412781@1] Please config phy interface. [ 7.416952@1] Please config savepowermode. [ 7.421012@1] Please config reset_pin_enable. [ 7.425353@1] Please config reset_delay. [ 7.429247@1] Please config reset_pin. [ 7.432976@1] ethernetinit(dbg[c099a170]=1) [ 7.437162@1] ethernet base addr is fe0c0000 [ 7.441384@1] write mac add to:ee6cda48: 00 01 23 cd ee af |..#...| [ 7.450146@1] libphy: AMLMAC MII Bus: probed [ 7.451874@1] eth0: PHY ID 02430c54 at 0 IRQ -1 (0:00) active [ 7.459161@1] Amlogic A/V streaming port init [ 7.463179@1] buffersize=262144,0,start=0 [ 7.465930@1] Subtitle stbuf alloced at 0xee940000, size = 262144 [ 7.471983@1] changed the (2) buffer size from 0 to 262144 [ 7.477698@1] init vdec memsource 79f00000->7defffff [ 7.482561@1] [tsync_pcr_init]init success. [ 7.486640@1] amvideocap_init_module [ 7.490217@1] amvideocap_probe,amvideocap [ 7.494182@1] amvideocap_dev_register buf:0d200000,size:800000. [ 7.500451@1] regist mpeg12 codec profile [ 7.504148@1] regist mpeg4 codec profile [ 7.507955@1] amvdec_vc1 module init [ 7.511593@1] regist vc1 codec profile [ 7.515244@1] amvdec_h264 module init [ 7.518984@1] regist h264 codec profile [ 7.522691@1] amvdec_h264_4k2k module init [ 7.526859@1] regist h264_4k2k codec profile [ 7.531012@1] amvdec_h265 module init [ 7.534749@1] regist hevc_unsupport codec profile [ 7.539417@1] regist mjpeg codec profile [ 7.543235@1] amvdec_real module init [ 7.546964@1] regist real codec profile [ 7.550689@1] amvdec_avs module init [ 7.554429@1] amvenc_avc memory resource undefined. [ 7.559097@1] amvenc_avc memory is invaild, probe fail! [ 7.564317@1] amvenc_avc: probe of amvenc_avc.0 failed with error -14 [ 7.571040@1] picdec buffer size is 4000000 [ 7.575042@1] alloc_keep_buffer keep_y_addr eda00000 [ 7.579827@1] alloc_keep_buffer keep_u_addr ee000000 [ 7.584772@1] alloc_keep_buffer keep_v_addr ede80000 [ 7.589697@1] yaddr=eda00000,u_addr=ee000000,v_addr=ede80000 [ 7.595636@1] create_ge2d_work_queue video task ok [ 7.600592@2] efuse=========================================== [ 7.606226@2] efuse: device efuse created [ 7.610079@2] efuse-------------------------------------------- [ 7.615886@2] SARADC Driver init. [ 7.619308@2] __saradc_probe__ [ 7.763903@2] saradc calibration: ref_val = 509 [ 7.763931@2] saradc calibration: ref_nominal = 512 [ 7.767645@2] saradc calibration: coef = 4120 [ 7.772278@2] ir irblaster probe [ 7.775458@2] Remote Driver [ 7.778027@2] Remote platform_data g_remote_base=fe600580 [ 7.783361@2] set drvdata completed [ 7.786903@2] device_create_file completed [ 7.791420@2] input: aml_keypad as /devices/platform/meson-remote/input/input4 [ 7.798587@2] input_register_device completed [ 7.802888@2] [0xffffff00] = 0x1dd0190 [ 7.806576@2] [0xffffff04] = 0xf800ca [ 7.810207@2] [0xffffff08] = 0x82006e [ 7.813853@2] [0xffffff0c] = 0x3c0030 [ 7.817488@2] [0xffffff10] = 0x30fa0013 [ 7.821302@2] [0xffffff18] = 0x6f19000 [ 7.825035@2] [0xffffff1c] = 0xbe40 [ 7.828496@2] [0x0] = 0xfa00a0 [ 7.831530@2] [0x4] = 0xfa00a0 [ 7.834570@2] [0x8] = 0xfa00a0 [ 7.837598@2] [0xc] = 0x640030 [ 7.840632@2] [0x10] = 0x30fa0013 [ 7.843931@2] [0x18] = 0x961b800 [ 7.847133@2] [0x1c] = 0x9740 [ 7.850080@2] [0x20] = 0x104 [ 7.852940@2] [0x24] = 0x0 [ 7.855636@2] [0x28] = 0x0 [ 7.858315@2] set_remote_mode[69] [ 7.861626@2] remote config major:235 [ 7.865524@2] physical address:0x2f5fc000 [ 7.869402@2] Meson KeyInput init [ 7.872748@2] GPIO Keypad Driver init. [ 7.876407@2] ==gpio_key_probe== [ 7.879574@2] reg:2620,clearmask=400040,setmask=1 [ 7.884321@2] reg:2622,clearmask=ff0000,set pin=3 [ 7.889002@2] reg:2623,clearmask=7000000,setmask=7 [ 7.893793@2] reg:2620,clearmask=800080,setmask=10001 [ 7.898883@2] reg:2622,clearmask=ff000000,set pin=3 [ 7.903737@2] reg:2623,clearmask=70000000,setmask=7 [ 7.908616@2] power key(116) registed. [ 7.908618@0] key 116 up [ 7.914985@2] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input5 [ 7.922326@2] gpio keypad register input device completed. [ 7.927671@2] gpio keypad major:234 [ 7.931366@2] spi_nor_init [ 7.933937@2] amlogic_spi_nor_probe: [ 7.937373@2] amlogic_spi->state_name:default [ 7.941823@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated [ 7.949355@2] check_storage_device : spi boot_device_flag : 0 [ 7.954973@2] spi_nor_probe [ 7.957769@2] spi_nor apollospi:32766: mx25l160 (2048 Kbytes) [ 7.963554@2] Creating 2 MTD partitions on "apollospi:32766": [ 7.969193@2] 0x000000000000-0x000000100000 : "bootloader" [ 7.975323@2] 0x000000100000-0x000000110000 : "ubootenv" [ 7.980527@2] amlogic_spi_nor_probe over [ 7.984004@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 7.993407@2] host->base fe108c20 [ 7.996611@2] pdata->caps 7 [ 7.999348@2] pdata->caps2 0 [ 8.002210@2] get property: port, value:0x00000001 [ 8.008718@2] get property: ocr_avail, value:0x00200000 [ 8.015217@2] get property: f_min, value:0x000493e0 [ 8.021712@2] get property: f_max, value:0x02faf080 [ 8.028224@2] get property: max_req_size, value:0x00020000 [ 8.034721@2] get property: irq_in, value:0x00000003 [ 8.041217@2] get property: irq_out, value:0x00000005 [ 8.047726@2] get property: gpio_cd, str:CARD_6 [ 8.053700@2] get property: gpio_ro, str:GPIOZ_0 [ 8.059786@2] get property: pinname, str:sd [ 8.065407@2] get property: jtag_pin, str:CARD_0 [ 8.071382@2] get property: card_type, value:0x00000005 [ 8.077889@2] get property: gpio_dat3, str:CARD_4 [ 8.123815@2] reg:2620,clearmask=80008,setmask=10001 [ 8.123853@2] reg:2621,clearmask=ff000000,set pin=64 [ 8.128166@2] reg:2623,clearmask=7000,setmask=7 [ 8.132674@2] reg:2620,clearmask=200020,setmask=1 [ 8.137440@2] reg:2622,clearmask=ff00,set pin=64 [ 8.142035@2] reg:2623,clearmask=700000,setmask=7 [ 8.146846@3] pdata->caps 107 [ 8.149669@3] pdata->caps2 0 [ 8.152534@3] get property: port, value:0x00000000 [ 8.159048@3] get property: ocr_avail, value:0x00200000 [ 8.165549@3] get property: f_min, value:0x000493e0 [ 8.172039@3] get property: f_max, value:0x02faf080 [ 8.178547@3] get property: max_req_size, value:0x00020000 [ 8.185051@3] get property: pinname, str:sdio [ 8.190847@3] get property: card_type, value:0x00000003 [ 8.303795@1] [aml_sdio_probe] aml_sdio_probe() success! [ 8.305014@1] host->base fe108e00 [ 8.306806@1] pdata->caps 80000547 [ 8.310139@1] pdata->caps2 0 [ 8.313000@1] get property: port, value:0x00000005 [ 8.319514@1] get property: ocr_avail, value:0x00200000 [ 8.326010@1] get property: f_min, value:0x000493e0 [ 8.332503@1] get property: f_max, value:0x05f5e100 [ 8.339012@1] get property: max_req_size, value:0x00020000 [ 8.345515@1] get property: pinname, str:emmc [ 8.351314@1] get property: card_type, value:0x00000001 [ 8.357822@1] get property: gpio_dat3, str:BOOT_3 [ 8.363802@1] [is_emmc_exist] host->storage_flag=4, POR_BOOT_VALUE=5 [ 8.370124@1] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config! [ 8.423791@1] [aml_sdhc_probe] aml_sdhc_probe() success! [ 8.423930@1] [dsp]DSP start addr 0xc5e00000 [ 8.427726@1] [dsp]register dsp to char divece(257) [ 8.432955@1] amlogic audio spdif interface device init! [ 8.437914@1] name=nand_key nand_key [ 8.441811@1] register_aes_algorithm:488,new way [ 8.446351@1] key name:keyexample, key data:1234567890 [ 8.451737@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0 [ 8.458514@1] [AML1216]call aml1216_battery_init, ret = 0 [ 8.458607@1] [AML1218]call aml1218_battery_init, ret = 0 [ 8.458651@1] [RN5T618]call rn5t618_battery_probe in [ 8.458799@1] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input6 [ 8.465042@1] [RN5T618]use BSP configed battery parameters [ 8.465049@1] [RN5T618] NO BATTERY_PARAMETERS FOUND [ 8.476006@1] [RN5T618]call rn5t618_battery_probe exit, ret:0 [ 8.476083@1] [RN5T618]call rn5t618_battery_init, ret = 0 [ 8.477113@1] amaudio2: device amaudio2 created [ 8.477272@1] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1 [ 8.482775@1] Error: Didn't get power valid value --- wifi_power_probe 323 [ 8.489452@1] wifi_power power_gpio is 6 [ 8.493341@1] wifi_power power_gpio2 is 123 [ 8.497798@1] bcmdhd_wlan_init() [ 8.500711@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef370480, size=3760 [ 8.507739@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef370540, size=3760 [ 8.514758@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef370600, size=3760 [ 8.521772@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef3706c0, size=3760 [ 8.528799@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef370780, size=3760 [ 8.535819@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef370840, size=3760 [ 8.542836@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef370900, size=3760 [ 8.549862@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef3709c0, size=3760 [ 8.556885@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef370a80, size=7856 [ 8.563906@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef370b40, size=7856 [ 8.570921@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef370c00, size=7856 [ 8.578033@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef370cc0, size=7856 [ 8.585145@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef370d80, size=7856 [ 8.592245@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef370e40, size=7856 [ 8.599358@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef370f00, size=7856 [ 8.606470@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ee787000, size=7856 [ 8.613569@1] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ee7870c0, size=16048 [ 8.620770@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef370480, size=20504 [ 8.627790@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef370540, size=20504 [ 8.634812@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef370600, size=81944 [ 8.641830@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef3706c0, size=163864 [ 8.648940@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef370780, size=20504 [ 8.655962@1] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ef480000, size=65536 [ 8.663325@1] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ef490000, size=65536 [ 8.670696@1] bcmdhd_init_wlan_mem: WIFI MEM Allocated [ 8.675810@1] amlogic rfkill init [ 8.679103@1] Error: Driver 'bt-dev' is already registered, aborting... [ 8.685910@1] UMP: UMP device driver -v8.0.2_20170510-45-g23443a5 loaded [ 8.692604@1] aml_aes aml_aes: Aml AES [ 8.696420@1] aml_tdes aml_tdes: Aml TDES [ 8.700733@1] enter rt5616_modinit [ 8.703650@1] dummy_codec_platform_probe [ 8.707572@1] == ES8323 == es8323_modinit() [ 8.711724@1] *****enter pcm2bt_codec_probe [ 8.715777@1] pcm2bt_codec_probe ok! [ 8.719848@1] enter aml_i2s_dai_probe [ 8.719855@1] i2s get no clk src setting in dts, use the default mpll 0 [ 8.725920@1] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000 [ 8.733978@1] enter aml_pcm_dai_probe [ 8.734063@1] [aml-spdif-dai]enter aml_dai_spdif_init [ 8.738825@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4 [ 8.745939@1] audio_set_958_clk, freq=4, [ 8.749837@1] IEC958 16bit [ 8.752521@1] hdmitx: audio: aout notify rate 48000 [ 8.757380@1] hdmitx: audio: aout notify size 16 [ 8.761968@1] hdmitx: audio: aout notify format CT_PCM [ 8.767090@1] hdmitx: audio: audio channel num is 1 [ 8.771939@1] hdmitx: audio: SPDIF [ 8.775331@1] hdmitx: audio: current VIC: 4 [ 8.779477@1] hdmitx: audio: audio sample rate: 3 [ 8.784163@1] hdmitx: audio: set audio N para [ 8.788497@1] hdmitx: audio: PCM out to HDMI [ 8.792740@1] hdmitx: audio: i2s_to_spdif_flag:1 [ 8.797426@1] hdmitx: audio: Enable audio spdif to HDMI [ 8.802624@1] hdmitx: audio: Audio Type: PCM [ 8.806917@1] hdmitx: audio: set audio param [ 8.811171@1] [aml-spdif-dai]aml_spdif_probe [ 8.815519@1] test codec dummy_codec [ 8.818919@1] using external codec, index = 1 [ 8.823252@1] using external dummy codec [ 8.827293@1] enter spdif_dit_probe [ 8.830706@1] aml_spdif_unmute [ 8.834028@1] codec_name = dummy_codec.0 [ 8.837998@1] enter aml_asoc_init [ 8.838020@1] p_aml_audio->hp_disable=1 [ 8.841543@1] falied to get spk event delay time paraments from dts file [ 8.848225@1] spk_event delay_time = 0 [ 8.852956@1] aml-i2s 0:playback preallocate_dma_buffer: area=f08e7000, addr=2d900000, size=524288 [ 8.861132@1] aml-i2s 1:capture preallocate_dma_buffer: area=f05b1000, addr=2eb20000, size=65536 [ 8.869653@1] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok [ 8.877753@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 0 [ 8.877873@1] aml_pcm2bt_preallocate_dma_buffer allcoate buf->area: f05d2000 buf->addr: 0x2e3c0000 buf->bytes: 65536 [ 8.888099@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 1 [ 8.888214@1] aml_pcm2bt_preallocate_dma_buffer allcoate buf->area: f05e3000 buf->addr: 0x2e3d0000 buf->bytes: 65536 [ 8.898588@1] aml_snd_m8 aml_m8_sound_card.5: pcm2bt-pcm <-> aml-pcm-dai.0 mapping ok [ 8.907548@1] aml-i2s 0:playback preallocate_dma_buffer: area=f0969000, addr=2da00000, size=524288 [ 8.915649@1] aml-i2s 1:capture preallocate_dma_buffer: area=f0782000, addr=2d9a0000, size=65536 [ 8.924174@1] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok [ 8.933133@1] -----ext_codec=1--- [ 8.935354@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0 [ 8.941727@1] TCP: cubic registered [ 8.945242@1] NET: Registered protocol family 10 [ 8.949930@2] NET: Registered protocol family 17 [ 8.954003@2] NET: Registered protocol family 15 [ 8.958619@2] Key type dns_resolver registered [ 8.963321@2] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 8.970797@2] Registering SWP/SWPB emulation handler [ 8.975735@2] enter meson_pm_init [ 8.979127@2] enter meson_pm_probe! [ 8.982498@2] ---meson_pm_probe----set output pin success [ 8.987873@2] meson_pm_probe done ! [ 8.992279@2] regulator-dummy: disabling [ 8.995515@2] console [netcon0] enabled [ 8.999044@2] netconsole: network logging started [ 9.004152@2] aml_rtc rtc.0: setting system clock to 2018-08-30 22:24:19 UTC (1535667859) [ 9.011894@2] ### dt-test ### No testcase data in device tree; not running tests [ 9.019345@2] meson_cpufreq: no voltage_control prop [ 9.024189@2] voltage_control = 0 [ 9.028777@2] buf[0]=16,buf[1]=9b,err=4 [ 9.031290@2] M8:adc=433,TS_C=6,flag=1 [ 9.035023@2] efuse_flag=a [ 9.037705@2] amlogic_thermal_probe, this chip is trimmed, use thermal [ 9.044212@2] amlogic-thermal aml_thermal: amlogic thermal probe start [ 9.050708@2] #thermal-cells=7 [ 9.053740@2] pdata->temp_trip_count=4 [ 9.057484@2] temperature=70000 on trip point=0 [ 9.061974@2] fixing high_freq=1608001 to 1608000 at trip point 0,level=2 [ 9.068735@2] fixing low_freq=1608001 to 1608000 at trip point 0,level=2 [ 9.075415@2] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511 [ 9.081825@2] cpu[0] core num==3 [ 9.085038@2] gpu[0] core num==5 [ 9.088239@2] temperature=80000 on trip point=1 [ 9.092746@2] fixing high_freq=1200001 to 1200000 at trip point 1,level=6 [ 9.099507@2] fixing low_freq=1200001 to 1200000 at trip point 1,level=6 [ 9.106187@2] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435 [ 9.112597@2] cpu[1] core num==2 [ 9.115808@2] gpu[1] core num==4 [ 9.119011@2] temperature=90000 on trip point=2 [ 9.123518@2] fixing high_freq=800001 to 696000 at trip point 2,level=11 [ 9.130193@2] fixing low_freq=800001 to 696000 at trip point 2,level=11 [ 9.136782@2] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328 [ 9.143195@2] cpu[2] core num==2 [ 9.146407@2] gpu[2] core num==3 [ 9.149610@2] temperature=260000 on trip point=3 [ 9.154208@2] fixing high_freq=-1 to -22 at trip point 3,level=-1 [ 9.160272@2] fixing low_freq=-1 to -22 at trip point 3,level=-1 [ 9.166258@2] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1 [ 9.172494@2] cpu[3] core num==-1 [ 9.175792@2] gpu[3] core num==-1 [ 9.179082@2] idle interval=1000 [ 9.182290@2] pdata->name:aml_thermal [ 9.186242@2] tmp_trip[0].cpu_core_upper=1 [ 9.190011@2] tmp_trip[1].cpu_core_upper=2 [ 9.194090@2] tmp_trip[2].cpu_core_upper=2 [ 9.198156@2] tmp_trip[3].cpu_core_upper=-1 [ 9.202317@2] aml_thermal bind thermal-cpucore-0 okay ! [ 9.207538@2] aml_thermal bind thermal-cpufreq-0 okay ! [ 9.212837@2] amlogic: Kernel Thermal management registered [ 9.218273@2] amlogic-thermal aml_thermal: amlogic thermal probe done [ 9.224801@2] ALSA device list: [ 9.227799@2] #0: AML-M8AUDIO [ 9.243788@2] Changing uart_ao_ttyS0: baud from 0 to 115200 [ 9.263899@2] Freeing unused kernel memory: 204K [ 9.369540@1] vfm_map_store:rm default [ 9.369540@1] [ 9.369613@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 9.369613@1] [ 9.419385@2] aml_nftl_open ok! [ 9.419641@2] blktrans_ioctl -cmd: 5331,801c0204,64 [ 9.445465@2] aml_nftl_open ok! [ 9.445579@2] blktrans_ioctl -cmd: 5331,801c0204,64 [ 9.473431@2] aml_nftl_open ok! [ 9.474666@2] EXT3-fs (system): error: couldn't mount because of unsupported optional features (40) [ 9.474742@2] aml_nftl_open ok! [ 9.474794@2] EXT2-fs (system): error: couldn't mount because of unsupported optional features (40) [ 9.474834@2] aml_nftl_open ok! [ 9.474876@2] force enable DISCARD here for ext4 fs [ 9.477981@3] checked enable EXT4 DISCARD here [ 9.477990@3] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null) [ 9.554713@2] aml_nftl_open ok! [ 9.555963@2] EXT3-fs (data): error: couldn't mount because of unsupported optional features (40) [ 9.556033@2] aml_nftl_open ok! [ 9.556084@2] EXT2-fs (data): error: couldn't mount because of unsupported optional features (40) [ 9.556123@2] aml_nftl_open ok! [ 9.556164@2] force enable DISCARD here for ext4 fs [ 9.567478@3] checked enable EXT4 DISCARD here [ 9.567489@3] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null) [ 10.476861@1] [RN5T618]battery vol change: 0->0 [ 14.737757@0] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 14.737982@0] systemd[1]: Detected architecture arm. [ 14.753935@0] systemd[1]: Set hostname to . [ 14.782813@0] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 14.782830@0] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 14.842605@0] systemd[1]: Listening on udev Control Socket. [ 14.854094@1] systemd[1]: Created slice User and Session Slice. [ 14.874048@1] systemd[1]: Listening on udev Kernel Socket. [ 14.894716@2] systemd[1]: Listening on RPCbind Server Activation Socket. [ 14.914119@3] systemd[1]: Reached target RPC Port Mapper. [ 14.934480@3] systemd[1]: Listening on Journal Socket (/dev/log). [ 14.955304@3] systemd[1]: Starting Show Version... [ 14.955944@3] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 14.956639@3] systemd[1]: Listening on Journal Socket. [ 14.958323@3] systemd[1]: Starting Samba Configuration... [ 14.960371@3] systemd[1]: Mounting Variable Directory... [ 14.962979@3] systemd[1]: Mounting Kernel Debug File System... [ 14.965639@3] systemd[1]: Mounting POSIX Message Queue File System... [ 14.966073@3] systemd[1]: Reached target Slices. [ 14.967008@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.969214@3] systemd[1]: Starting Debug Shell on /dev/ttyS0... [ 14.970106@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 14.970440@3] systemd[1]: Reached target Paths. [ 14.990971@2] systemd[1]: Started Show Version. [ 15.004454@2] systemd[1]: Mounted Variable Directory. [ 15.025357@2] systemd[1]: Started Samba Configuration. [ 15.044284@2] systemd[1]: Mounted Kernel Debug File System. [ 15.064453@1] systemd[1]: Mounted POSIX Message Queue File System. [ 15.085326@2] systemd[1]: Started Debug Shell on /dev/ttyS0. [ 15.088871@2] systemd[1]: Starting Create kernel modules tree from overlays... [ 15.104401@1] kernel-overlays-setup: setup base modules [ 15.154207@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.10.108 [ 15.225253@2] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 15.225389@2] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 15.226720@2] kernel-overlays-setup: done [ 15.227939@3] systemd[1]: Started Create kernel modules tree from overlays. [ 15.229810@3] systemd[1]: Starting udev Coldplug all Devices... [ 15.231743@3] systemd[1]: Starting Mounting swapfile... [ 15.234040@3] systemd[1]: Starting Remount Root and Kernel File Systems... [ 15.236273@3] systemd[1]: Starting Setup machine-id... [ 15.244838@1] systemd[1]: Starting Load Kernel Modules... [ 15.248459@1] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 15.249470@1] systemd[1]: Started Remount Root and Kernel File Systems. [ 15.259000@1] systemd[1]: Started Setup machine-id. [ 15.259986@1] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 15.262351@1] systemd[1]: Starting Create Static Device Nodes in /dev... [ 15.264415@1] systemd[1]: Starting Journal Service... [ 15.275964@2] systemd[1]: Started Mounting swapfile. [ 15.276615@2] systemd[1]: Reached target Swap. [ 15.278141@2] systemd[1]: Mounting Temporary Directory (/tmp)... [ 15.284090@2] systemd[1]: Mounted Temporary Directory (/tmp). [ 15.293165@2] amlvideo-000: V4L2 device registered as video10 [ 15.301125@0] pdata->tmp_trip[0].gpu_lower_level=1 [ 15.301133@0] pdata->tmp_trip[0].gpu_upper_level=1 [ 15.301153@0] pdata->tmp_trip[1].gpu_lower_level=2 [ 15.301156@0] pdata->tmp_trip[1].gpu_upper_level=2 [ 15.301164@0] pdata->tmp_trip[2].gpu_lower_level=3 [ 15.301167@0] pdata->tmp_trip[2].gpu_upper_level=3 [ 15.301174@0] pdata->tmp_trip[3].gpu_lower_level=-1 [ 15.301177@0] pdata->tmp_trip[3].gpu_upper_level=-1 [ 15.301185@0] aml_thermal bind thermal-gpufreq-0 okay ! [ 15.301189@0] gpu cooling register okay with err=0 [ 15.301279@0] tmp_trip[0].gpu_core_upper=1 [ 15.301289@0] tmp_trip[1].gpu_core_upper=2 [ 15.301297@0] tmp_trip[2].gpu_core_upper=3 [ 15.301314@0] tmp_trip[3].gpu_core_upper=-1 [ 15.301326@0] aml_thermal bind thermal-gpucore-0 okay ! [ 15.301332@0] gpu core cooling register okay with err=0 [ 15.301420@0] Mali: Mali device driver loaded [ 15.303902@0] wifi_setup_dt [ 15.303913@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi [ 15.303918@0] clock_32k_pin(122) : (null) [ 15.303932@0] clock_32k_pin(122) : sdio_wifi [ 15.304136@0] interrupt_pin(133) : (null) [ 15.304150@0] reg:2620,clearmask=100010,setmask=0 [ 15.304156@0] reg:2622,clearmask=ff,set pin=133 [ 15.304160@0] reg:2623,clearmask=70000,setmask=4 [ 15.304163@0] interrupt_pin(133) : sdio_wifi [ 15.304166@0] power_on_pin(6) : (null) [ 15.304172@0] power_on_pin(6) : sdio_wifi [ 15.304176@0] power_on_pin2(123) : (null) [ 15.304182@0] power_on_pin2(123) : sdio_wifi [ 15.307254@2] systemd[1]: Started Create Static Device Nodes in /dev. [ 15.307815@2] systemd[1]: Reached target Local File Systems (Pre). [ 15.307973@2] systemd[1]: Reached target Local File Systems. [ 15.309511@2] systemd[1]: Starting Rebuild Journal Catalog... [ 15.318434@0] systemd[1]: Started Rebuild Journal Catalog. [ 15.358684@3] systemd[1]: Started Journal Service. [ 15.374823@1] systemd-journald[1479]: Received request to flush runtime journal from PID 1 [ 15.703816@1] WIFI Disable! 6 [ 15.710694@0] cfg80211: Calling CRDA to update world regulatory domain [ 15.710765@0] cfg80211: World regulatory domain updated: [ 15.710769@0] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.710775@0] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) [ 15.710779@0] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 15.710782@0] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) [ 15.710786@0] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 15.710789@0] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 15.710793@0] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) [ 15.710797@0] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) [ 15.710801@0] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 15.727131@2] dhd_module_init: in [ 15.727141@2] wifi_setup_dt [ 15.727146@2] wifi_request_32k_clk : ON-->ON for sdio_wifi [ 15.727150@2] interrupt_pin(133) : sdio_wifi [ 15.727155@2] sdio_wifi is using the pin GPIOX_21 [ 15.727158@2] wifi_dt : gpio op failed(-16) at line 253 [ 15.727168@2] reg:2620,clearmask=100010,setmask=0 [ 15.727171@2] reg:2622,clearmask=ff,set pin=133 [ 15.727175@2] reg:2623,clearmask=70000,setmask=4 [ 15.727178@2] interrupt_pin(133) : sdio_wifi [ 15.727181@2] power_on_pin(6) : sdio_wifi [ 15.727184@2] sdio_wifi is using the pin GPIOAO_6 [ 15.727187@2] wifi_dt : gpio op failed(-16) at line 275 [ 15.727191@2] power_on_pin(6) : sdio_wifi [ 15.727194@2] power_on_pin2(123) : sdio_wifi [ 15.727197@2] sdio_wifi is using the pin GPIOX_11 [ 15.727200@2] wifi_dt : gpio op failed(-16) at line 287 [ 15.727203@2] power_on_pin2(123) : sdio_wifi [ 15.727206@2] sdio_wifi is using the pin GPIOX_20 [ 15.727209@2] wifi_dt : gpio op failed(-16) at line 317 [ 15.813842@1] ======== bcm_wlan_set_plat_data ======== [ 15.813853@1] host_oob_irq: 100 [ 15.813857@1] host_oob_irq_flags=1044 [ 15.813860@1] dhd_wifi_platform_load: Enter [ 15.813876@1] Power-up adapter 'DHD generic adapter' [ 15.813880@1] wifi_platform_set_power = 1 [ 15.813883@1] ======== PULL WL_REG_ON HIGH! ======== [ 15.813890@1] WIFI Disable! 6 [ 16.013752@1] WIFI Enable! 6 [ 16.249355@1] The PHY does not support set_wol, was CONFIG_MICREL_PHY enabled? [ 16.283099@1] aml_nftl_open ok! [ 16.283368@3] aml_nftl_open ok! [ 16.284117@1] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.284950@3] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.289651@3] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.292179@3] aml_nftl_open ok! [ 16.293316@3] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.326607@0] aml_nftl_open ok! [ 16.327409@0] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.328228@3] aml_nftl_open ok! [ 16.328845@3] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.331974@2] blktrans_ioctl -cmd: 5331,801c0204,64 [ 16.079005@1] amlvideo openamlvideo close [ 16.517096@1] amlvideo openwifi_platform_bus_enumerate device present 1 [ 16.545096@1] ======== Card detection to detect SDIO card! ======== [ 16.545131@1] sdio: mmc_rescan_try_freq: trying to init card at 400000 Hz [ 16.517364@1] amlvideo close [ 17.543993@1] [aml_sdio_timeout] time_start_cnt:998 [ 17.543993@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 17.544222@2]  [ 18.543984@2] [aml_sdio_timeout] time_start_cnt:999 [ 18.543984@2] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 18.544205@3]  [ 19.544154@3] [aml_sdio_timeout] time_start_cnt:995 [ 19.544154@3] <4>[ 19.558533@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 19.560719@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 19.562951@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 19.567050@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 19.646426@2] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width [ 19.650460@1] [sdio_reinit] finish [ 19.670389@2] bcmsdh_register: register client driver [ 19.671302@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 19.672203@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 19.672285@2] bus num (host idx)=1, slot num (rca)=1 [ 19.672340@2] found adapter info 'DHD generic adapter' [ 19.672428@2] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09a0304, size=139264 [ 19.672505@2] success alloc section 3, size 139264 [ 19.673262@2] alloc static buf at ee180000! [ 19.673361@2] 1 bcmdhd_mem_prealloc: section=4, wlan_static_skb=c0bd3f98 [ 19.673494@2] success alloc section 4, size 0 [ 19.677905@1] dhdsdio_probe : no mutex held. set lock [ 19.678824@1] F1 signature read @0x18000000=0x16044330 [ 19.708080@2] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0 [ 19.715605@2] DHD: dongle ram size is set to 294912(orig 294912) at 0x0 [ 19.715923@2] 4 bcmdhd_mem_prealloc: section=7, wlan_mem_array[4]=ef4d0000 [ 19.715928@2] success alloc section 7, size 19744 [ 19.715974@2] dhd_conf_set_chiprev: chip=0x4330, chiprev=4 [ 19.716014@2] dhd_conf_set_conf_path_by_nv_path: config_path=/usr/lib/firmware/brcm/config.txt [ 19.717955@2] dhd_conf_read_nv_by_chip: nv_by_chip_count=12 [ 19.717968@2] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 19.717972@2] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 19.717976@2] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 19.717980@2] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 19.717984@2] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 19.717989@2] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 19.717996@2] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 19.718003@2] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 19.718012@2] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 19.718017@2] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 19.718021@2] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359sa.txt [ 19.718025@2] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 19.718055@2] dhd_conf_read_config: mimo_bw_cap = 1 [ 19.718258@2] dhd_conf_read_config: bcn_timeout = 20 [ 19.718316@2] dhd_conf_read_config: kso_enable = 0 [ 19.718481@2] dhd_conf_read_config: PM = 0 [ 19.718555@2] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09a02ec, size=10416 [ 19.718561@2] success alloc section 0, size 10416 [ 19.719145@2] 2 bcmdhd_mem_prealloc: section=5, wlan_static_scan_buf0=ef480000 [ 19.719155@2] success alloc section 5, size 65536 [ 19.719322@2] wl_create_event_handler(): thread:wl_event_handler:979 started [ 19.719436@2] tsk Enter, tsk = 0xee83f69c [ 19.719573@2] dhd_attach(): thread:dhd_watchdog_thread:97b started [ 19.719610@2] dhd_attach(): thread:dhd_dpc:97c started [ 19.719632@2] dhd_dpc_thread: set dpc_cpucore 0 from config.txt [ 19.719664@2] dhd_attach(): thread:dhd_rxf:97d started [ 19.719675@2] dhd_deferred_work_init: work queue initialized [ 19.719687@2] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09a02f4, size=10396 [ 19.719691@2] success alloc section 1, size 10396 [ 19.719704@2] 7 bcmdhd_mem_prealloc: wlan_mem_array[section].mem_ptr=c09a02fc, size=65536 [ 19.719707@2] success alloc section 2, size 65536 [ 19.719871@2] dhdsdio_probe_init: set use_rxchain 0 from config.txt [ 19.728144@2] Dongle Host Driver, version 1.201.59.5 (r506368) [ 19.728144@2] Compiled in drivers/net/wireless/bcmdhd [ 19.728723@2] Register interface [wlan0] MAC: 6c:fa:a7:62:2c:f6 [ 19.728723@2] [ 19.728735@2] dhd_prot_ioctl : bus is down. we have nothing to do [ 19.728785@2] bcmsdh_oob_intr_unregister: Enter [ 19.728788@2] bcmsdh_oob_intr_unregister: irq is not registered [ 19.728796@2] dhd_txglom_enable: enable 0 [ 19.728800@2] dhd_bus_devreset: WLAN OFF DONE [ 19.728841@2] wifi_platform_set_power = 0 [ 19.728845@2] ======== PULL WL_REG_ON LOW! ======== [ 19.728849@2] dhdsdio_probe : the lock is released. [ 19.728933@2] dhd_module_init: Exit err=0 [ 19.544441@2] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940 [ 19.544441@2]  [ 19.835506@2] Console: switching to colour dummy device 80x30 [ 19.853826@3] Changing uart_a_ttyS1: baud from 0 to 115200 [ 19.909186@0] nftl _nand_discard, start sector=286400, length=320 [ 19.909272@0] nftl _nand_discard, start sector=289168, length=112 [ 19.909313@0] nftl _nand_discard, start sector=289664, length=128 [ 19.909347@0] nftl _nand_discard, start sector=292176, length=176 [ 19.909381@0] nftl _nand_discard, start sector=292776, length=88 [ 19.909544@0] nftl _nand_discard, start sector=293200, length=34480 [ 19.909593@0] nftl _nand_discard, start sector=334288, length=560 [ 19.909621@0] nftl _nand_discard, start sector=335632, length=240 [ 19.910139@0] nftl _nand_discard, start sector=336720, length=187568 [ 19.914293@0] nftl _nand_discard, start sector=528392, length=258040 [ 19.920065@0] nftl _nand_discard, start sector=796824, length=251752 [ 19.923314@0] nftl _nand_discard, start sector=1052688, length=258032 [ 19.925777@0] nftl _nand_discard, start sector=1321104, length=251760 [ 19.927746@0] nftl _nand_discard, start sector=1576976, length=258032 [ 19.929737@0] nftl _nand_discard, start sector=1845392, length=251760 [ 19.929819@0] nftl _nand_discard, start sector=2101504, length=3840 [ 19.929856@0] nftl _nand_discard, start sector=2105472, length=256 [ 19.930681@0] nftl _nand_discard, start sector=2105816, length=253480 [ 19.932640@0] nftl _nand_discard, start sector=2369680, length=251760 [ 19.934653@1] nftl _nand_discard, start sector=2625552, length=258032 [ 19.937006@0] nftl _nand_discard, start sector=2887688, length=258040 [ 19.939528@0] nftl _nand_discard, start sector=3149832, length=258040 [ 19.941953@0] nftl _nand_discard, start sector=3411976, length=258040 [ 19.944382@0] nftl _nand_discard, start sector=3674120, length=258040 [ 19.947149@0] nftl _nand_discard, start sector=3936264, length=258040 [ 19.948696@0] nftl _nand_discard, start sector=4201344, length=64 [ 19.948738@0] nftl _nand_discard, start sector=4203712, length=64 [ 19.948769@0] nftl _nand_discard, start sector=4203968, length=64 [ 19.948798@0] nftl _nand_discard, start sector=4204800, length=168 [ 19.948832@0] nftl _nand_discard, start sector=4205488, length=72 [ 19.948864@0] nftl _nand_discard, start sector=4205696, length=144 [ 19.948901@0] nftl _nand_discard, start sector=4212464, length=272 [ 19.948934@0] nftl _nand_discard, start sector=4215352, length=72 [ 19.948968@0] nftl _nand_discard, start sector=4216400, length=248 [ 19.948999@0] nftl _nand_discard, start sector=4218456, length=72 [ 19.949028@0] nftl _nand_discard, start sector=4218584, length=72 [ 19.949058@0] nftl _nand_discard, start sector=4218816, length=64 [ 19.949085@0] nftl _nand_discard, start sector=4224688, length=80 [ 19.949112@0] nftl _nand_discard, start sector=4225904, length=72 [ 19.949139@0] nftl _nand_discard, start sector=4228360, length=176 [ 19.949167@0] nftl _nand_discard, start sector=4230464, length=64 [ 19.949188@0] nftl _nand_discard, start sector=4230784, length=96 [ 19.949215@0] nftl _nand_discard, start sector=4230888, length=80 [ 19.949240@0] nftl _nand_discard, start sector=4231168, length=120 [ 19.949264@0] nftl _nand_discard, start sector=4236288, length=208 [ 19.950308@0] nftl _nand_discard, start sector=4259504, length=80 [ 19.950362@0] nftl _nand_discard, start sector=4261672, length=152 [ 19.954049@0] nftl _nand_discard, start sector=4266312, length=64 [ 19.954307@0] nftl _nand_discard, start sector=4279464, length=5360 [ 19.954443@0] nftl _nand_discard, start sector=4284840, length=40536 [ 19.954482@0] nftl _nand_discard, start sector=4331184, length=3152 [ 19.954515@0] nftl _nand_discard, start sector=4334400, length=480 [ 19.954547@0] nftl _nand_discard, start sector=4335016, length=176 [ 19.954576@0] nftl _nand_discard, start sector=4335664, length=2024 [ 19.954598@0] nftl _nand_discard, start sector=4337696, length=80 [ 19.954699@0] nftl _nand_discard, start sector=4337792, length=20432 [ 19.954754@0] nftl _nand_discard, start sector=4358240, length=4496 [ 19.954830@0] nftl _nand_discard, start sector=4362752, length=4432 [ 19.954887@0] nftl _nand_discard, start sector=4367272, length=5608 [ 19.954940@0] nftl _nand_discard, start sector=4372888, length=5728 [ 19.955284@0] nftl _nand_discard, start sector=4378688, length=12160 [ 19.955503@0] nftl _nand_discard, start sector=4390856, length=65592 [ 19.957331@0] nftl _nand_discard, start sector=4462624, length=12256 [ 19.957856@0] nftl _nand_discard, start sector=4503552, length=215040 [ 19.960666@0] nftl _nand_discard, start sector=4722696, length=258040 [ 19.962772@0] nftl _nand_discard, start sector=4984840, length=258040 [ 19.965383@0] nftl _nand_discard, start sector=5246984, length=258040 [ 19.967838@0] nftl _nand_discard, start sector=5509128, length=258040 [ 19.970374@0] nftl _nand_discard, start sector=5771272, length=258040 [ 19.972392@0] nftl _nand_discard, start sector=6033416, length=258040 [ 19.974604@0] nftl _nand_discard, start sector=6295560, length=258040 [ 19.976692@0] nftl _nand_discard, start sector=6563984, length=251760 [ 19.981366@0] nftl _nand_discard, start sector=6819848, length=258040 [ 19.987446@0] nftl _nand_discard, start sector=7088272, length=251760 [ 19.992369@0] nftl _nand_discard, start sector=7344136, length=258040 [ 19.994932@0] nftl _nand_discard, start sector=7606280, length=258040 [ 19.997066@0] nftl _nand_discard, start sector=7868424, length=258040 [ 20.003465@0] nftl _nand_discard, start sector=8130568, length=258040 [ 20.024491@0] nftl _nand_discard, start sector=8392712, length=258040 [ 20.026065@0] nftl _nand_discard, start sector=8654856, length=248 [ 20.026119@0] nftl _nand_discard, start sector=8655328, length=3616 [ 20.026500@0] nftl _nand_discard, start sector=8667136, length=122880 [ 20.026861@0] nftl _nand_discard, start sector=8797200, length=115696 [ 20.030478@0] nftl _nand_discard, start sector=8917008, length=258032 [ 20.039030@0] nftl _nand_discard, start sector=9179144, length=258040 [ 20.065041@3] netdev_open [ 20.065066@3] Ethernet reset [ 20.065073@3] NET MDA descpter start addr=ecf23000 [ 20.066246@3] phy_interface = 1 [ 20.066257@3] aml_phy_init: trying to attach to 0:00 [ 20.066626@3] --1--write mac add to:ee6cda48: 00 01 23 cd ee af |..#...| [ 20.066733@3] ret = 17 [ 20.066733@3] print_buff=76:50:21:91:CB:BD [ 20.066740@3] 0 : 118 [ 20.066743@3] 1 : 80 [ 20.066745@3] 2 : 33 [ 20.066748@3] 3 : 145 [ 20.066750@3] 4 : 203 [ 20.066754@3] 5 : 189 [ 20.066759@3] --2--write mac add to:ee6cda48: 76 50 21 91 cb bd |vP!...| [ 20.066770@3] write mac add to:ee6cda48: 76 50 21 91 cb bd |vP!...| [ 20.066782@3] Current DMA mode=0, set mode=621c100 [ 20.066826@3] eth0: opened (irq 40). [ 20.066836@3] ether leave promiscuous mode [ 20.066842@3] ether leave all muticast mode [ 20.066847@3] changed the Multicast,mcount=1 [ 20.066855@3] add mac address:33:33:00:00:00:01,bit=1 [ 20.066859@3] set hash low=2,high=0 [ 20.066862@3] changed the filter setting to :4 [ 20.066873@3] changed the Multicast,mcount=1 [ 20.066877@3] add mac address:33:33:00:00:00:01,bit=1 [ 20.066944@3] changed the Multicast,mcount=2 [ 20.066952@3] add mac address:33:33:00:00:00:01,bit=1 [ 20.066956@3] add mac address:01:00:5e:00:00:01,bit=32 [ 20.066960@3] set hash low=2,high=1 [ 20.066963@3] changed the filter setting to :4 [ 20.066972@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.103215@3] dhd_open: Enter ee7d7000 [ 20.103234@3] [ 20.103234@3] Dongle Host Driver, version 1.201.59.5 (r506368) [ 20.103234@3] Compiled in drivers/net/wireless/bcmdhd [ 20.103241@3] wl_android_wifi_on in 1 [ 20.103245@3] wl_android_wifi_on in 2: g_wifi_on=0 [ 20.103250@3] wifi_platform_set_power = 1 [ 20.103253@3] ======== PULL WL_REG_ON HIGH! ======== [ 20.103261@3] WIFI Disable! 6 [ 20.107679@2] nftl _nand_discard, start sector=19570688, length=8 [ 20.108251@2] nftl _nand_discard, start sector=9441288, length=258040 [ 20.108324@2] nftl _nand_discard, start sector=19582976, length=8 [ 20.109542@2] nftl _nand_discard, start sector=2105776, length=40 [ 20.110115@2] nftl _nand_discard, start sector=9703432, length=258040 [ 20.112939@0] nftl _nand_discard, start sector=9965576, length=258040 [ 20.113852@0] nftl _nand_discard, start sector=2105376, length=16 [ 20.117326@0] nftl _nand_discard, start sector=10227720, length=258040 [ 20.120135@0] nftl _nand_discard, start sector=10489864, length=258040 [ 20.124591@0] nftl _nand_discard, start sector=10752008, length=258040 [ 20.128900@0] nftl _nand_discard, start sector=11014152, length=258040 [ 20.131544@0] nftl _nand_discard, start sector=11276296, length=258040 [ 20.135723@0] nftl _nand_discard, start sector=11538448, length=258032 [ 20.137582@0] nftl _nand_discard, start sector=11800592, length=258032 [ 20.139437@0] nftl _nand_discard, start sector=12062728, length=258040 [ 20.141328@0] nftl _nand_discard, start sector=12324872, length=258040 [ 20.143211@0] nftl _nand_discard, start sector=12587016, length=258040 [ 20.145059@0] nftl _nand_discard, start sector=12855440, length=251760 [ 20.146958@0] nftl _nand_discard, start sector=13111304, length=258040 [ 20.148816@0] nftl _nand_discard, start sector=13373448, length=258040 [ 20.150669@0] nftl _nand_discard, start sector=13635592, length=258040 [ 20.152566@0] nftl _nand_discard, start sector=13897736, length=258040 [ 20.154560@0] nftl _nand_discard, start sector=14159888, length=258032 [ 20.156424@0] nftl _nand_discard, start sector=14422024, length=258040 [ 20.158283@0] nftl _nand_discard, start sector=14684168, length=258040 [ 20.160145@0] nftl _nand_discard, start sector=14946312, length=258040 [ 20.161999@0] nftl _nand_discard, start sector=15208456, length=258040 [ 20.163906@0] nftl _nand_discard, start sector=15470600, length=258040 [ 20.165850@0] nftl _nand_discard, start sector=15732744, length=258040 [ 20.167730@0] nftl _nand_discard, start sector=15994888, length=258040 [ 20.169578@0] nftl _nand_discard, start sector=16257032, length=258040 [ 20.171467@0] nftl _nand_discard, start sector=16519176, length=258040 [ 20.173340@0] nftl _nand_discard, start sector=16781328, length=258032 [ 20.175270@0] nftl _nand_discard, start sector=17043464, length=258040 [ 20.177165@0] nftl _nand_discard, start sector=17305608, length=258040 [ 20.179006@0] nftl _nand_discard, start sector=17567752, length=258040 [ 20.180874@0] nftl _nand_discard, start sector=17829896, length=258040 [ 20.182728@0] nftl _nand_discard, start sector=18092040, length=258040 [ 20.184575@0] nftl _nand_discard, start sector=18354184, length=258040 [ 20.186503@0] nftl _nand_discard, start sector=18616328, length=258040 [ 20.188458@0] nftl _nand_discard, start sector=18878472, length=258040 [ 20.190285@0] nftl _nand_discard, start sector=19140616, length=258040 [ 20.190328@0] nftl _nand_discard, start sector=19405984, length=864 [ 20.190352@0] nftl _nand_discard, start sector=19410944, length=72 [ 20.190377@0] nftl _nand_discard, start sector=19411024, length=4016 [ 20.190392@0] nftl _nand_discard, start sector=19419136, length=120 [ 20.190416@0] nftl _nand_discard, start sector=19419264, length=4048 [ 20.190444@0] nftl _nand_discard, start sector=19423320, length=5520 [ 20.190465@0] nftl _nand_discard, start sector=19428856, length=2776 [ 20.190494@0] nftl _nand_discard, start sector=19431648, length=5544 [ 20.190516@0] nftl _nand_discard, start sector=19437208, length=368 [ 20.190535@0] nftl _nand_discard, start sector=19437584, length=2032 [ 20.190554@0] nftl _nand_discard, start sector=19460064, length=616 [ 20.190569@0] nftl _nand_discard, start sector=19460696, length=384 [ 20.190583@0] nftl _nand_discard, start sector=19461096, length=128 [ 20.190597@0] nftl _nand_discard, start sector=19461264, length=296 [ 20.190618@0] nftl _nand_discard, start sector=19461568, length=2624 [ 20.190639@0] nftl _nand_discard, start sector=19495016, length=1944 [ 20.190656@0] nftl _nand_discard, start sector=19546112, length=184 [ 20.190687@0] nftl _nand_discard, start sector=19546312, length=3896 [ 20.190731@0] nftl _nand_discard, start sector=19554304, length=1048 [ 20.190758@0] nftl _nand_discard, start sector=19555360, length=3512 [ 20.190899@0] nftl _nand_discard, start sector=19558992, length=3504 [ 20.190931@0] nftl _nand_discard, start sector=19564544, length=2080 [ 20.190958@0] nftl _nand_discard, start sector=19566720, length=3984 [ 20.190988@0] nftl _nand_discard, start sector=19570784, length=6232 [ 20.191001@0] nftl _nand_discard, start sector=19577024, length=96 [ 20.191016@0] nftl _nand_discard, start sector=19577128, length=432 [ 20.191029@0] nftl _nand_discard, start sector=19577576, length=88 [ 20.191049@0] nftl _nand_discard, start sector=19577720, length=2576 [ 20.191063@0] nftl _nand_discard, start sector=19580360, length=384 [ 20.191078@0] nftl _nand_discard, start sector=19580816, length=568 [ 20.191107@0] nftl _nand_discard, start sector=19581392, length=5680 [ 20.191132@0] nftl _nand_discard, start sector=19591264, length=4032 [ 20.191294@0] nftl _nand_discard, start sector=19595344, length=65456 [ 20.193089@0] nftl _nand_discard, start sector=19664912, length=258032 [ 20.194897@0] nftl _nand_discard, start sector=19927048, length=258040 [ 20.196749@0] nftl _nand_discard, start sector=20189192, length=258040 [ 20.198622@0] nftl _nand_discard, start sector=20451336, length=258040 [ 20.200496@0] nftl _nand_discard, start sector=20713480, length=258040 [ 20.202330@0] nftl _nand_discard, start sector=20977296, length=256368 [ 20.204211@0] nftl _nand_discard, start sector=21244048, length=251760 [ 20.206049@0] nftl _nand_discard, start sector=21499912, length=258040 [ 20.207822@0] nftl _nand_discard, start sector=21762056, length=258040 [ 20.209595@0] nftl _nand_discard, start sector=22024200, length=258040 [ 20.211393@0] nftl _nand_discard, start sector=22286344, length=258040 [ 20.213221@0] nftl _nand_discard, start sector=22548488, length=258040 [ 20.215059@0] nftl _nand_discard, start sector=22810632, length=258040 [ 20.216916@0] nftl _nand_discard, start sector=23072776, length=258040 [ 20.218730@0] nftl _nand_discard, start sector=23334920, length=258040 [ 20.220541@0] nftl _nand_discard, start sector=23597072, length=258032 [ 20.222388@0] nftl _nand_discard, start sector=23859208, length=258040 [ 20.224248@0] nftl _nand_discard, start sector=24121360, length=258032 [ 20.226157@0] nftl _nand_discard, start sector=24383496, length=258040 [ 20.228031@0] nftl _nand_discard, start sector=24645648, length=258032 [ 20.229828@0] nftl _nand_discard, start sector=24907808, length=258016 [ 20.231665@0] nftl _nand_discard, start sector=25169928, length=258040 [ 20.233316@0] nftl _nand_discard, start sector=25432072, length=176120 [ 20.233735@0] nftl _nand_discard, start sector=316208, length=3280 [ 20.233819@0] nftl _nand_discard, start sector=507904, length=6144 [ 20.233865@0] nftl _nand_discard, start sector=522240, length=2048 [ 20.235192@0] nftl _nand_discard, start sector=529176, length=11496 [ 20.239519@0] nftl _nand_discard, start sector=610224, length=176208 [ 20.245264@0] nftl _nand_discard, start sector=790544, length=258032 [ 20.252604@0] nftl _nand_discard, start sector=1053464, length=257256 [ 20.259323@0] nftl _nand_discard, start sector=1314832, length=258032 [ 20.261267@1] nftl _nand_discard, start sector=1577752, length=257256 [ 20.263101@1] nftl _nand_discard, start sector=1839120, length=258032 [ 20.265038@1] nftl _nand_discard, start sector=2102040, length=257256 [ 20.266939@1] nftl _nand_discard, start sector=2363408, length=258032 [ 20.268791@1] nftl _nand_discard, start sector=2626328, length=257256 [ 20.270650@1] nftl _nand_discard, start sector=2887696, length=258032 [ 20.272513@1] nftl _nand_discard, start sector=3149840, length=258032 [ 20.303248@3] WIFI Enable! 6 [ 20.804109@3] sdio_reset_comm(): [ 20.824627@2] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 20.827169@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 20.829651@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 20.834359@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 20.917291@3] [ 20.917291@3] [ 20.917291@3] dhd_bus_devreset: == WLAN ON == [ 20.918532@3] F1 signature read @0x18000000=0x16044330 [ 20.949927@3] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0 [ 20.955887@3] DHD: dongle ram size is set to 294912(orig 294912) at 0x0 [ 20.959365@3] dhdsdio_probe_init: set use_rxchain 0 from config.txt [ 20.965673@3] dhd_conf_read_nv_by_chip: nv_by_chip_count=12 [ 20.965802@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 20.965914@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 20.966013@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 20.966112@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 20.966179@3] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 20.966371@3] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 20.966508@3] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 20.966648@3] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 20.966749@3] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 20.966847@3] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 20.966912@3] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359sa.txt [ 20.967009@3] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 20.967659@3] dhd_conf_read_config: mimo_bw_cap = 1 [ 20.972169@3] dhd_conf_read_config: bcn_timeout = 20 [ 20.973251@3] dhd_conf_read_config: kso_enable = 0 [ 20.977030@3] dhd_conf_read_config: PM = 0 [ 20.977541@3] dhd_conf_set_fw_name_by_chip: firmware_path=/usr/lib/firmware/brcm/fw_bcm40183b2.bin [ 20.977641@3] dhd_conf_set_nv_name_by_chip: nvram_path=/usr/lib/firmware/brcm/nvram_ap6330.txt [ 20.977726@3] Final fw_path=/usr/lib/firmware/brcm/fw_bcm40183b2.bin [ 20.977776@3] Final nv_path=/usr/lib/firmware/brcm/nvram_ap6330.txt [ 20.977852@3] Final conf_path=/usr/lib/firmware/brcm/config.txt [ 21.050264@3] NVRAM version: AP6330_NVRAM_V1.0_20121130 [ 21.050795@3] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 21.314086@2] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 21.314235@2] bcmsdh_oob_intr_register: Enter [ 21.314244@2] bcmsdh_oob_intr_register: HW_OOB enabled [ 21.314253@2] bcmsdh_oob_intr_register OOB irq=100 flags=414 [ 21.314285@2] bcmsdh_oob_intr_register: enable_irq_wake [ 21.314294@2] bcmsdh_oob_intr_register: enable_irq_wake failed with -6 [ 21.315496@2] dhd_conf_set_band: Set band 0 [ 21.315648@2] dhd_preinit_ioctls: Set tcpack_sup_mode 0 [ 21.317256@2] Firmware up: op_mode=0x0005, MAC=6c:fa:a7:62:2c:f6 [ 21.317261@2] dhd_conf_set_country: Set country SG, revision 0 [ 21.384885@2] Country code: SG (SG/0) [ 21.385153@2] dhd_conf_set_roam: Set roam_off 1 [ 21.391193@2] dhd_conf_set_mimo_bw_cap: Set mimo_bw_cap 1 [ 21.391436@2] CONFIG-ERROR) dhd_conf_set_mimo_bw_cap: mimo_bw_cap setting failed -23 [ 21.392189@2] dhd_preinit_ioctls buf_key_b4_m4 set failed -23 [ 21.397742@3] Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 [ 21.397749@3] Driver: 1.201.59.5 (r506368) [ 21.397749@3] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 [ 21.397974@3] dhd_txglom_enable: enable 0 [ 21.397978@3] dhd_conf_set_disable_proptx: set disable_proptx 1 [ 21.398511@3] dhd_preinit_ioctls wl ampdu_hostreorder failed -23 [ 21.398878@3] wl_android_wifi_on: Success [ 21.496895@3] dhd_set_scb_probe: GET max_scb_probe failed [ 21.498052@3] dhd_set_scb_probe: max_scb_probe setting failed [ 21.498122@3] dhd_open: Exit ret=0 [ 22.163940@3] libphy: 0:00 - Link is Up - 100/Full [ 22.163962@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.164093@3] changed the Multicast,mcount=3 [ 22.164104@3] add mac address:33:33:00:00:00:01,bit=1 [ 22.164114@3] add mac address:01:00:5e:00:00:01,bit=32 [ 22.164119@3] add mac address:33:33:ff:91:cb:bd,bit=11 [ 22.164121@3] set hash low=802,high=1 [ 22.164125@3] changed the filter setting to :4 [ 22.169132@1] 8021q: 802.1Q VLAN Support v1.8 [ 22.214215@2] changed the Multicast,mcount=2 [ 22.214231@2] add mac address:33:33:00:00:00:01,bit=1 [ 22.214235@2] add mac address:01:00:5e:00:00:01,bit=32 [ 22.214239@2] set hash low=2,high=1 [ 22.214244@2] changed the filter setting to :4 [ 22.214262@2] changed the Multicast,mcount=1 [ 22.214266@2] add mac address:01:00:5e:00:00:01,bit=32 [ 22.214269@2] set hash low=0,high=1 [ 22.214273@2] changed the filter setting to :4 [ 22.496662@3] IEC958 16bit [ 22.496675@3] hdmitx: audio: aout notify rate 48000 [ 22.496679@3] hdmitx: audio: aout notify size 16 [ 22.496681@3] hdmitx: audio: no update [ 22.496686@3] aml_i2s_close device type 8 [ 22.511873@3] IEC958 16bit [ 22.511885@3] hdmitx: audio: aout notify rate 48000 [ 22.511889@3] hdmitx: audio: aout notify size 16 [ 22.511892@3] hdmitx: audio: no update [ 22.511897@3] aml_i2s_close device type 8 [ 22.513119@3] IEC958 16bit [ 22.513128@3] hdmitx: audio: aout notify rate 48000 [ 22.513131@3] hdmitx: audio: aout notify size 16 [ 22.513134@3] hdmitx: audio: no update [ 22.513138@3] aml_i2s_close device type 8 [ 22.514189@3] IEC958 16bit [ 22.514197@3] hdmitx: audio: aout notify rate 48000 [ 22.514206@3] hdmitx: audio: aout notify size 16 [ 22.514209@3] hdmitx: audio: no update [ 22.514214@3] aml_i2s_close device type 8 [ 22.515514@3] IEC958 16bit [ 22.515524@3] hdmitx: audio: aout notify rate 48000 [ 22.515527@3] hdmitx: audio: aout notify size 16 [ 22.515530@3] hdmitx: audio: no update [ 22.515535@3] aml_i2s_close device type 8 [ 22.516752@3] IEC958 16bit [ 22.516762@3] hdmitx: audio: aout notify rate 48000 [ 22.516765@3] hdmitx: audio: aout notify size 16 [ 22.516768@3] hdmitx: audio: no update [ 22.516772@3] aml_i2s_close device type 8 [ 22.517442@3] IEC958 16bit [ 22.517454@3] hdmitx: audio: aout notify rate 48000 [ 22.517458@3] hdmitx: audio: aout notify size 16 [ 22.517460@3] hdmitx: audio: no update [ 22.517465@3] aml_i2s_close device type 8 [ 22.518563@3] IEC958 16bit [ 22.518570@3] hdmitx: audio: aout notify rate 48000 [ 22.518573@3] hdmitx: audio: aout notify size 16 [ 22.518586@3] hdmitx: audio: no update [ 22.518591@3] aml_i2s_close device type 8 [ 22.519746@3] IEC958 16bit [ 22.519754@3] hdmitx: audio: aout notify rate 48000 [ 22.519757@3] hdmitx: audio: aout notify size 16 [ 22.519760@3] hdmitx: audio: no update [ 22.519764@3] aml_i2s_close device type 8 [ 22.520346@3] IEC958 16bit [ 22.520352@3] hdmitx: audio: aout notify rate 48000 [ 22.520356@3] hdmitx: audio: aout notify size 16 [ 22.520358@3] hdmitx: audio: no update [ 22.520362@3] aml_i2s_close device type 8 [ 22.521425@3] IEC958 16bit [ 22.521431@3] hdmitx: audio: aout notify rate 48000 [ 22.521434@3] hdmitx: audio: aout notify size 16 [ 22.521438@3] hdmitx: audio: no update [ 22.521442@3] aml_i2s_close device type 8 [ 22.522537@3] IEC958 16bit [ 22.522545@3] hdmitx: audio: aout notify rate 48000 [ 22.522548@3] hdmitx: audio: aout notify size 16 [ 22.522551@3] hdmitx: audio: no update [ 22.522555@3] aml_i2s_close device type 8 [ 22.523220@3] IEC958 16bit [ 22.523227@3] hdmitx: audio: aout notify rate 48000 [ 22.523230@3] hdmitx: audio: aout notify size 16 [ 22.523233@3] hdmitx: audio: no update [ 22.523237@3] aml_i2s_close device type 8 [ 22.523660@3] ***Entered sound/soc/aml/m8/aml_pcm_dai.c:aml_dai_pcm_startup [ 22.524045@3] ***Entered sound/soc/aml/m8/aml_pcm_dai.c:aml_dai_pcm_shutdown [ 22.524052@3] enter aml_pcm2bt_close type: 0 [ 22.528737@0] buf=0 [ 22.528747@0] IEC958_mode_raw=0 [ 22.532634@1] IEC958 16bit [ 22.532646@1] hdmitx: audio: aout notify rate 48000 [ 22.532650@1] hdmitx: audio: aout notify size 16 [ 22.532653@1] hdmitx: audio: no update [ 22.532658@1] aml_i2s_close device type 8 [ 22.533900@1] IEC958 16bit [ 22.533910@1] hdmitx: audio: aout notify rate 48000 [ 22.533913@1] hdmitx: audio: aout notify size 16 [ 22.533916@1] hdmitx: audio: no update [ 22.533921@1] aml_i2s_close device type 8 [ 22.535745@1] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2 [ 22.535977@1] [aml-i2s-dai]enterd aml_dai_i2s_prepare,old_samplerate:48000,sample_rate=44100 [ 22.535989@1] [aml-i2s-dai]i2s dma f08e7000,phy addr 2d900000,mode 0,ch 2 [ 22.535993@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 22.535998@1] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5 [ 22.536001@1] audio_set_958_clk, freq=5, [ 22.536006@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 22.536010@1] iec958 mode PCM16 [ 22.536015@1] IEC958 16bit [ 22.536019@1] hdmitx: audio: aout notify rate 44100 [ 22.536023@1] hdmitx: audio: aout notify size 16 [ 22.536028@1] hdmitx: audio: audio channel num is 1 [ 22.536035@1] hdmitx: audio: SPDIF [ 22.536045@1] hdmitx: audio: current VIC: 4 [ 22.536048@1] hdmitx: audio: audio sample rate: 2 [ 22.536051@1] hdmitx: audio: set audio N para [ 22.536057@1] hdmitx: audio: PCM out to HDMI [ 22.536061@1] hdmitx: audio: i2s_to_spdif_flag:1 [ 22.536063@1] hdmitx: audio: Enable audio spdif to HDMI [ 22.536069@1] hdmitx: audio: Audio Type: PCM [ 22.536111@1] hdmitx: audio: set audio param [ 22.536114@1] [aml-spdif-dai]spdif dma f08e7000,phy addr 2d900000 [ 22.536181@1] speaker_events--mute =1 [ 22.543994@1] [aml-i2s-dai]i2s dma f08e7000,phy addr 2d900000,mode 0,ch 2 [ 22.544001@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 22.544005@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 22.544009@1] iec958 mode PCM16 [ 22.544014@1] IEC958 16bit [ 22.544018@1] hdmitx: audio: aout notify rate 44100 [ 22.544021@1] hdmitx: audio: aout notify size 16 [ 22.544024@1] hdmitx: audio: no update [ 22.544027@1] [aml-spdif-dai]spdif dma f08e7000,phy addr 2d900000 [ 22.546706@1] [aml-i2s-dai]aiu i2s playback enable [ 22.546706@1] [ 22.546716@1] [aml-i2s-dai]audio_hw_958_enable 1 [ 23.176734@0] changed the Multicast,mcount=2 [ 23.176754@0] add mac address:01:00:5e:00:00:01,bit=32 [ 23.176758@0] add mac address:01:00:5e:00:00:fb,bit=48 [ 23.176761@0] set hash low=0,high=10001 [ 23.176766@0] changed the filter setting to :4 [ 23.251388@0] nftl _nand_discard, start sector=4460584, length=8 [ 23.251437@0] nftl _nand_discard, start sector=19595296, length=48 [ 23.251461@0] nftl _nand_discard, start sector=19591176, length=72 [ 23.285705@0] nftl _nand_discard, start sector=19570704, length=8 [ 26.113864@1] Changing uart_a_ttyS1: baud from 115200 to 2000000 [ 26.142601@1] Bluetooth: Core ver 2.16 [ 26.142728@1] NET: Registered protocol family 31 [ 26.142736@1] Bluetooth: HCI device and connection manager initialized [ 26.142767@1] Bluetooth: HCI socket layer initialized [ 26.142778@1] Bluetooth: L2CAP socket layer initialized [ 26.142799@1] Bluetooth: SCO socket layer initialized [ 26.148344@0] Bluetooth: HCI UART driver ver 2.2 [ 26.148359@0] Bluetooth: HCI H4 protocol initialized [ 26.148363@0] Bluetooth: HCI Realtek H5 protocol initialized [ 26.148366@0] rtk_btcoex: rtk_uart_coex_init, version: 1.1 [ 26.148368@0] rtk_btcoex: create workqueue [ 26.149485@1] Bluetooth: hci_uart_register_dev [ 26.160121@2] rtk_btcoex: create udpsocket, connect_port: 30001 [ 26.160159@2] rtk_btcoex: send msg INVITE_REQ with len:11 [ 26.167798@0] rtk_btcoex: uart_coex_info.hci_reversion = 1000 [ 26.167811@0] rtk_btcoex: uart_coex_info.lmp_subversion = 4103 [ 26.214022@3] Changing uart_a_ttyS1: baud from 2000000 to 115200 [ 28.183822@2] rtk_btcoex: release udp socket [ 29.133394@0] nftl _nand_discard, start sector=19402832, length=8 [ 29.133428@0] nftl _nand_discard, start sector=4358224, length=8 [ 29.133446@0] nftl _nand_discard, start sector=19587080, length=8 [ 29.133462@0] nftl _nand_discard, start sector=19591168, length=8 [ 29.133479@0] nftl _nand_discard, start sector=19570760, length=16 [ 35.113669@0] nftl _nand_discard, start sector=19570776, length=8 [ 82.733826@1] [aml-i2s-dai]aiu i2s playback disable [ 82.733826@1] [ 82.733839@1] [aml-i2s-dai]audio_hw_958_enable 0 [ 82.733877@1] [aml-i2s-dai]i2s dma f08e7000,phy addr 2d900000,mode 0,ch 2 [ 82.733882@1] ----aml_hw_iec958_init,runtime->rate=44100-- [ 82.733886@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5-- [ 82.733890@1] iec958 mode PCM16 [ 82.733896@1] IEC958 16bit [ 82.733901@1] hdmitx: audio: aout notify rate 44100 [ 82.733904@1] hdmitx: audio: aout notify size 16 [ 82.733907@1] hdmitx: audio: no update [ 82.733910@1] [aml-spdif-dai]spdif dma f08e7000,phy addr 2d900000 [ 92.734146@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4 [ 92.734154@1] audio_set_958_clk, freq=4, [ 92.734164@1] IEC958 16bit [ 92.734169@1] hdmitx: audio: aout notify rate 48000 [ 92.734172@1] hdmitx: audio: aout notify size 16 [ 92.734177@1] hdmitx: audio: audio channel num is 1 [ 92.734184@1] hdmitx: audio: SPDIF [ 92.734194@1] hdmitx: audio: current VIC: 4 [ 92.734197@1] hdmitx: audio: audio sample rate: 3 [ 92.734200@1] hdmitx: audio: set audio N para [ 92.734207@1] hdmitx: audio: PCM out to HDMI [ 92.734211@1] hdmitx: audio: i2s_to_spdif_flag:1 [ 92.734213@1] hdmitx: audio: Enable audio spdif to HDMI [ 92.734218@1] hdmitx: audio: Audio Type: PCM [ 92.734260@1] hdmitx: audio: set audio param [ 92.734265@1] aml_i2s_close device type 8 [ 97.743887@1] speaker_events--mute =0