root@192.168.178.22's password: ############################################## # LibreELEC # # https://libreelec.tv # ############################################## LibreELEC (community): 8.90.5 (S912.arm) LibreELEC:~ # dmesg [ 0.000000@0] Initializing cgroup subsys cpuset [ 0.000000@0] Initializing cgroup subsys cpu [ 0.000000@0] Initializing cgroup subsys cpuacct [ 0.000000@0] Linux version 3.14.29 (adamg@sagrod.schiznik.net) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11) ) #1 SMP Wed Mar 7 04:29:54 GMT 2018 [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4 [ 0.000000@0] no prop version_code [ 0.000000@0] bootconsole [earlycon0] enabled [ 0.000000@0] fdt Reserved memory table: [ 0.000000@0] linux,di: 0x000000007d300000 - 0x000000007f100000 (30 MiB) [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007d300000, size 30 MiB [ 0.000000@0] linux,ion-dev: 0x0000000079300000 - 0x000000007d300000 (64 MiB) [ 0.000000@0] linux,vdin1_cma: 0x0000000078000000 - 0x0000000079000000 (16 MiB) [ 0.000000@0] cma: Reserved 16 MiB at 78000000, total cma pages:4096 [ 0.000000@0] linux,ppmgr: 0x0000000079300000 - 0x0000000079300000 (0 MiB) [ 0.000000@0] linux,codec_mm_cma: 0x0000000067800000 - 0x0000000073800000 (192 MiB) [ 0.000000@0] cma: Reserved 192 MiB at 67800000, total cma pages:53248 [ 0.000000@0] linux,picdec: 0x0000000079300000 - 0x0000000079300000 (0 MiB) [ 0.000000@0] Reserved memory: incorrect alignment of CMA region [ 0.000000@0] linux,codec_mm_reserved: 0x0000000073f00000 - 0x0000000078000000 (65 MiB) [ 0.000000@0] fdt Reserved memory total: 370 MiB [ 0.000000@0] cma: Reserved 8 MiB at 67000000, total cma pages:55296 [ 0.000000@0] On node 0 totalpages: 519424 [ 0.000000@0] Normal zone: 11176 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 519424 pages, LIFO batch:31 [ 0.000000@0] psci: probing function IDs from device-tree [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07926c000 s17536 r8192 d23424 u49152 [ 0.000000@0] pcpu-alloc: s17536 r8192 d23424 u49152 alloc=12*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508248 [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=8 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=c4:4e:ac:05:20:1a androidboot.mac=c4:4e:ac:05:20:1a console=tty0 systemd.show_status=auto ssh [ 0.000000@0] logo: osd1 [ 0.000000@0] logo: loaded [ 0.000000@0] logo: 0x3d800000 [ 0.000000@0] logo: 1080p60hz [ 0.000000@0] vout_serve: 1080p60hz [ 0.000000@0] vout_serve: en: 1 [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz [ 0.000000@0] vout_serve: 1080p60hz [ 0.000000@0] vout_serve: enable: 1 [ 0.000000@0] logo: get hdmimode: 1080p60hz [ 0.000000@0] logo: get cvbsmode: 576cvbs [ 0.000000@0] tv_vout: cvbs performance line = 0 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000@0] Memory: 1624616K/2077696K available (6985K kernel code, 808K rwdata, 2624K rodata, 909K init, 2906K bss, 453080K reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042bbd800 ( 43 MB) [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07f100000 ( 2033 MB) [ 0.000000@0] .init : 0xffffffc0019e4000 - 0xffffffc001ac7480 ( 910 kB) [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc0019e3734 ( 9614 kB) [ 0.000000@0] .data : 0xffffffc001ac8000 - 0xffffffc001b922b0 ( 809 kB) [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019e2fff] [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000@0] arch_multi_cluster:1 [ 0.000000@0] Hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.008249@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994 [ 0.016783@0] Console: colour dummy device 80x25 [ 0.021087@0] console [tty0] enabled [ 0.024672@0] bootconsole [earlycon0] disabled [ 0.030700@0] allocated 8388608 bytes of page_cgroup [ 0.030712@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.030736@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.030754@0] pid_max: default: 32768 minimum: 301 [ 0.030879@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.030891@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.036337@0] Initializing cgroup subsys memory [ 0.036370@0] Initializing cgroup subsys devices [ 0.036380@0] Initializing cgroup subsys freezer [ 0.036390@0] Initializing cgroup subsys blkio [ 0.036399@0] Initializing cgroup subsys net_prio [ 0.036447@0] ftrace: allocating 23647 entries in 93 pages [ 0.065319@0] /cpus/cpu@0: Missing clock-frequency property [ 0.065345@0] /cpus/cpu@1: Missing clock-frequency property [ 0.065356@0] /cpus/cpu@2: Missing clock-frequency property [ 0.065367@0] /cpus/cpu@3: Missing clock-frequency property [ 0.065379@0] /cpus/cpu@100: Missing clock-frequency property [ 0.065391@0] /cpus/cpu@101: Missing clock-frequency property [ 0.065404@0] /cpus/cpu@102: Missing clock-frequency property [ 0.065417@0] /cpus/cpu@103: Missing clock-frequency property [ 0.066942@0] Meson chip version = RevA (22:A - 82:0) [ 0.067481@1] CPU1: Booted secondary processor [ 0.067896@2] CPU2: Booted secondary processor [ 0.068278@3] CPU3: Booted secondary processor [ 0.068655@4] CPU4: Booted secondary processor [ 0.069057@5] CPU5: Booted secondary processor [ 0.069432@6] CPU6: Booted secondary processor [ 0.069813@7] CPU7: Booted secondary processor [ 0.069898@0] Brought up 8 CPUs [ 0.069961@0] SMP: Total of 8 processors activated. [ 0.070477@0] devtmpfs: initialized [ 0.076880@2] sched: registering cpufreq notifiers for scale-invariant loads [ 0.076924@2] instabooting: 0 [ 0.085133@0] cma: cma_init_reserved_areas, use_cma_first:1 [ 0.085218@0] pinctrl core: initialized pinctrl subsystem [ 0.085766@2] regulator-dummy: no parameters [ 0.086488@3] NET: Registered protocol family 16 [ 0.087739@0] ramoops: using module parameters [ 0.088279@0] pstore: Registered ramoops as persistent store backend [ 0.088300@0] ramoops: attached 0x100000@0x7300000, ecc: 0/0 [ 0.089077@3] aml_vdac_init: module init [ 0.089227@2] register canvas platform driver [ 0.089299@3] register rdma platform driver [ 0.090380@3] vdso: 2 pages (1 code, 1 data) at base ffffffc001ad0000 [ 0.090782@3] DMA: preallocated 256 KiB pool for atomic allocations [ 0.091728@3] software IO TLB [mem 0x62800000-0x62c00000] (4MB) mapped at [ffffffc062800000-ffffffc062bfffff] [ 0.092147@0] aml_i2c version: 20140813 [ 0.092342@0] i2c-core: driver [pmu4] using legacy resume method [ 0.092414@2] codec_mm:codec_mm_module_init [ 0.092780@3] gxbb_mpll_clk: register mpll_clk_out0 success done [ 0.092795@3] gxbb_mpll_clk: register mpll_clk_out1 success done [ 0.092828@3] gxbb_mpll_clk: register mpll_clk_out2 success done [ 0.093032@3] clk_sys: register PLL sys_pll success done [ 0.093051@3] gxl_clk: [ xtal ] ->clockrate: 24000000Hz [ 0.093061@3] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz [ 0.093070@3] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz [ 0.093079@3] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz [ 0.093089@3] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz [ 0.093098@3] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz [ 0.093107@3] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz [ 0.093116@3] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz [ 0.093124@3] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz [ 0.093158@3] gxl_clk: clock initialization complete [ 0.093349@3] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk_reg2=ffffff800003e764 [ 0.095652@2] aml_iomap: amlogic iomap probe done [ 0.096182@3] pinmux-gxl c1109880.pinmux: Init pinux probe! [ 0.097034@3] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver [ 0.097481@2] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0) [ 0.097511@2] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0) [ 0.097666@3] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0) [ 0.097690@3] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0) [ 0.099953@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000 [ 0.099967@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000 [ 0.099976@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000 [ 0.099986@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000 [ 0.099995@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000 [ 0.100004@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000 [ 0.100014@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000 [ 0.100023@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000 [ 0.102201@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000 [ 0.102212@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000 [ 0.102222@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000 [ 0.102231@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000 [ 0.102240@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000 [ 0.102250@0] dvfs [scpi_dvfs_get_opps] - new count 5, max_freq 1000000000 [ 0.104111@0] codec_mm has 2 memory regions [ 0.104164@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok [ 0.104184@0] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok [ 0.104281@2] codec_mm has 2 memory regions [ 0.104302@2] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok [ 0.104319@2] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok [ 0.106206@0] vpu: driver version: v03 [ 0.106252@0] vpu: load vpu_clk: 666667000Hz(7) [ 0.106345@2] vpu: vpu_probe OK [ 0.107645@3] tv_vout: tvout_probe [ 0.107667@3] tv_vout: chrdev devno 265289728 for disp [ 0.107676@3] vout_notify: vout_register_server [ 0.107684@3] tv_vout: register tv module server ok [ 0.107914@2] tv_vout: create cdev tv [ 0.107926@2] tv_vout: tvout_probe OK [ 0.108491@2] canvas_probe reg=00000000c8838000,size=400 [ 0.108525@2] canvas maped reg_base =ffffff800009a000 [ 0.112232@0] rdma_probe [ 0.318310@2] bio: create slab at 0 [ 0.319402@3] SCSI subsystem initialized [ 0.319909@0] usbcore: registered new interface driver usbfs [ 0.320018@2] usbcore: registered new interface driver hub [ 0.320137@3] usbcore: registered new device driver usb [ 0.320916@1] i2c-gpio i2c_gpio.39: using pins 172 (SDA) and 173 (SCL) [ 0.321111@3] pps_core: LinuxPPS API ver. 1 registered [ 0.321123@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.321189@3] PTP clock support registered [ 0.321686@0] hdmitx: system: amhdmitx_init [ 0.321701@0] hdmitx: system: Ver: 2014May6 [ 0.321887@0] hdmitx: system: amhdmitx_probe [ 0.322207@3] hdmitx: system: not find match init-data [ 0.322224@3] hdmitx hpd irq = 89 [ 0.322767@1] hdmitx20: Mapped PHY: 0xc0800000 [ 0.322788@1] hdmitx20: Mapped PHY: 0xc1104400 [ 0.322812@1] hdmitx20: Mapped PHY: 0xc8100000 [ 0.322822@1] hdmitx20: Mapped PHY: 0xc8834000 [ 0.322831@1] hdmitx20: Mapped PHY: 0xc883a000 [ 0.322840@1] hdmitx20: Mapped PHY: 0xc883c000 [ 0.322852@1] hdmitx20: Mapped PHY: 0xd0100000 [ 0.322862@1] hdmitx20: Mapped PHY: 0xda83a000 [ 0.322877@1] hdmitx: alread display in uboot 0x10 [ 0.322919@1] avmute set to 1 [ 0.323335@1] tv_vout: tv_set_current_vmode[919]fps_target_mode=16 [ 0.323355@1] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 0.323372@1] tv_vout: already display in uboot [ 0.323380@1] vout_serve: vinfo mode is: 1080p60hz [ 0.323388@1] vout_serve: init mode 1080p60hz [ 0.323607@2] vout_serve: create_vout_fops OK [ 0.323617@2] vout_serve: create vout attribute OK [ 0.323625@2] vout_serve: meson_vout_probe OK [ 0.323805@2] logo: logo_init [ 0.324064@2] osd_rdma: osd_rdma_init: rdma_table p=0x67041000,op=0x67041000 , v=0xffffff800009e000 [ 0.324099@2] rdma_register, rdma_table_addr ffffff80000a9000 rdma_table_addr_phy 67042000 reg_buf ffffffc0103c6000 [ 0.324113@2] rdma_register success, handle 1 table_size 4096 [ 0.324122@2] osd_rdma: osd_rdma_init:osd reset rdma handle = 1. [ 0.324147@2] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 67043000 reg_buf ffffffc0001a6000 [ 0.324160@2] rdma_register success, handle 2 table_size 4096 [ 0.324168@2] osd_rdma: osd_rdma_init:osd rdma handle = 2. [ 0.324579@1] Advanced Linux Sound Architecture Driver Initialized. [ 0.326483@2] Switched to clocksource arch_sys_counter [ 0.329976@0] hdmitx: system: irq 80000002 [ 0.335449@2] FS-Cache: Loaded [ 0.343929@0] NET: Registered protocol family 2 [ 0.344369@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.344492@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.344694@0] TCP: Hash tables configured (established 16384 bind 16384) [ 0.344767@0] TCP: reno registered [ 0.344782@0] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.344828@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.345056@0] NET: Registered protocol family 1 [ 0.345581@1] pwm: probe ok [ 0.345867@1] wifi: power_on_pin_OD = 0; [ 0.345883@1] aml_wifi wifi.34: [wifi_dev_probe] no power_on_pin2 [ 0.345921@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm phandle val=32;pwm-channel1=4;pwm-channel2=12 [ 0.345936@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541 [ 0.345949@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518 [ 0.345962@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270 [ 0.345975@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259 [ 0.345987@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[2] = 6 [ 0.346000@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[2] = 9 [ 0.346012@1] aml_wifi wifi.34: [pwm_double_channel_conf_dt] wifi pwm dt ok [ 0.346040@1] aml_wifi wifi.34: [pwm_double_channel_conf] wifi pwm conf ok [ 0.346095@1] aml_wifi wifi.34: [wifi_dev_probe] dhd_static_buf setup [ 0.346165@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated [ 0.346178@1] aml_wifi wifi.34: [wifi_dev_probe] interrupt_pin=241 [ 0.346189@1] aml_wifi wifi.34: [wifi_dev_probe] irq_num=100, irq_trigger_type=1 [ 0.346201@1] aml_wifi wifi.34: [wifi_dev_probe] power_on_pin=240 [ 0.346212@1] aml_wifi wifi.34: [wifi_dev_probe] clock_32k_pin=0 [ 0.346493@2] aml_wifi wifi.34: [wifi_setup_dt] wifi_setup_dt [ 0.346534@2] aml_wifi wifi.34: [wifi_setup_dt] interrupt_pin(241) [ 0.346553@2] aml_wifi wifi.34: [wifi_setup_dt] power_on_pin(240) [ 0.346756@2] Unpacking initramfs... [ 0.357039@2] Freeing initrd memory: 3956K (ffffffc073ad9000 - ffffffc073eb6000) [ 0.360028@0] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.369367@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.369847@0] msgmni has been set to 3612 [ 0.370922@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.371028@0] io scheduler noop registered (default) [ 0.371038@0] io scheduler deadline registered [ 0.371067@0] io scheduler cfq registered [ 0.371917@1] meson-rng c8834000.rng: hwrng registered [ 0.375449@2] loop: module loaded [ 0.377296@0] tun: Universal TUN/TAP device driver, 1.6 [ 0.377319@0] tun: (C) 1999-2004 Max Krasnyansky [ 0.501718@2] libphy: stmmac: probed [ 0.501744@2] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.501755@2] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.502180@2] PPP generic driver version 2.4.2 [ 0.502449@1] NET: Registered protocol family 24 [ 0.502583@2] usbcore: registered new interface driver smsc95xx [ 0.502939@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral [ 0.503068@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.503094@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver [ 0.503326@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.503631@1] usbcore: registered new interface driver usb-storage [ 0.503842@0] usbcore: registered new interface driver usbserial [ 0.503928@1] usbcore: registered new interface driver usbserial_generic [ 0.504013@2] usbserial: USB Serial support registered for generic [ 0.504094@0] usbcore: registered new interface driver pl2303 [ 0.504171@1] usbserial: USB Serial support registered for pl2303 [ 0.504696@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000fa000 [ 0.504931@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port [ 0.504999@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fc080 [ 0.505328@0] mousedev: PS/2 mouse device common for all mice [ 0.505538@2] i2c /dev entries driver [ 0.506324@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 0.508599@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized [ 0.509876@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 0.510544@0] ledtrig-cpu: registered to indicate activity on CPUs [ 0.510694@2] hidraw: raw HID events driver (C) Jiri Kosina [ 0.512791@0] usbcore: registered new interface driver usbhid [ 0.512812@0] usbhid: USB HID core driver [ 0.513010@1] ashmem: initialized [ 0.513377@2] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fe4c0 [ 0.513414@2] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart [ 0.513435@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 2.161212@4] console [ttyS0] enabled [ 2.161259@2] hdmitx: plugin [ 2.168284@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800010a4c0 [ 2.174771@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart [ 2.185013@0] meson-gpu-clkgen c883c000.gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff] [ 2.193990@0] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16 [ 2.201939@1] hdmitx: system: hdmitx_hdcp_init [ 2.206760@3] aml_vrtc rtc.33: rtc core: registered aml_vrtc as rtc0 [ 2.212260@1] secmon has 1 memory regions [ 2.215937@1] secmon: share in base: 0xffffff800011c000, share out base: 0xffffff800011e000 [ 2.216183@2] EDID Parser: [ 2.216876@2] hdmitx: get dtd0 vic: 97 [ 2.216882@2] hdmitx: get dtd1 vic: 16 [ 2.216919@2] hdmitx: get dtd2 vic: 5 [ 2.216921@2] hdmitx: edid: find IEEEOUT [ 2.216925@2] hdmitx: edid: check sum valid [ 2.216926@2] hdmitx: edid: check sum valid [ 2.216931@2] hdmitx: update RX hdr info 5 [ 2.216936@2] hdmitx: edid: check sum valid [ 2.216937@2] hdmitx: edid: check sum valid [ 2.216939@2] hdmitx: edid: blk0 raw data [ 2.216971@2] 00ffffffffffff0011ee530001010101001b010380a05a780aee91a3544c9926 [ 2.216971@2] 0f5054a108003140454061407140818001010101010108e80030f2705a80b058 [ 2.216971@2] 8a0040846300001e023a801871382d40582c450040846300001e000000fc0044 [ 2.216971@2] 454e4f4e2d4156520a202020000000fd003a3e1e883c000a202020202020012c [ 2.216971@2] [ 2.216971@2] [ 2.216973@2] hdmitx: edid: blk1 raw data [ 2.217004@2] 020368f15e6160101f0413051403021220212215015d5e5f65666263640e230f [ 2.217004@2] 241e26350f7f073d1ec01507505f7e03570603677e035f7e01835f00006e030c [ 2.217004@2] 003500b83c2000800102030467d85dc401788003e40f030018e3060501e305c0 [ 2.217004@2] 00e61146d000f001011d8018711c1620582c250040846300009e00000000006f [ 2.217004@2] [ 2.217004@2] [ 2.217038@2] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 2.217046@2] hdmitx: video: get current mode: 1080p60hz [ 2.217047@2] hdmitx: update rx hdr info 5 [ 2.217049@2] hdmitx: update physcial size: 1600 900 [ 2.217072@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 2.217078@2] hdmtix: set audio [ 2.217089@2] hdmitx tx_aud_src = 0 [ 2.217114@2] hdmitx: fs = 0, cd = 4, tmds_clk = 148500 [ 2.217117@2] hdmitx aud_n_para = 6144 [ 2.217134@2] hdmitx set channel status [ 2.379949@1] secmon secmon.4: assigned reserved memory node linux,secmon ok [ 2.386942@1] secmon: probe done [ 2.390717@2] storage: storage in base: 0xffffff8001800000 [ 2.395516@2] storage: storage out base: 0xffffff8001880000 [ 2.401060@2] storage: storage block base: 0xffffff8001900000 [ 2.406770@2] storage: probe done! [ 2.410837@1] aml_sd_emmc_probe: line 3594 [ 2.414148@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 2.424735@1] aml_sd_emmc_reg_init 1149 [ 2.427459@1] get property: ocr_avail, value:0x00200080 [ 2.433812@1] get property: f_min, value:300000 [ 2.439942@1] get property: f_max, value:100000000 [ 2.446319@1] get property: max_req_size, value:0x00020000 [ 2.452795@1] get property: pinname, str:emmc [ 2.458572@1] get property: card_type, value:1 [ 2.464288@1] get property: gpio_dat3, str: [ 2.469697@1] get property: hw_reset, str: [ 2.475147@1] emmc:pdata->caps = c0000d47 [ 2.479099@1] emmc:pdata->caps2 = 18060 [ 2.482888@1] emmc:pdata->pm_caps = 0 [ 2.486530@1] storage 1, boot 1 [ 2.489615@1] get_storage_dev return 1 [ 2.526501@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.526755@1] aml_sd_emmc_probe: line 3594 [ 2.531741@1] aml_sd_emmc_reg_init 1149 [ 2.534620@1] get property: ocr_avail, value:0x00200080 [ 2.541044@1] get property: f_min, value:400000 [ 2.547159@1] get property: f_max, value:100000000 [ 2.553536@1] get property: max_req_size, value:0x00020000 [ 2.560012@1] get property: irq_in, value:3 [ 2.565697@1] get property: irq_out, value:5 [ 2.571404@1] get property: gpio_cd, str: [ 2.576830@1] get property: pinname, str:sd [ 2.582431@1] get property: jtag_pin, str: [ 2.587872@1] get property: card_type, value:5 [ 2.593555@1] get property: card_in_delay, value:400 [ 2.599427@1] get property: gpio_dat3, str: [ 2.604867@1] sd:pdata->caps = 7 [ 2.608050@1] sd:pdata->caps2 = 0 [ 2.611323@1] sd:pdata->pm_caps = 0 [ 2.646740@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.647004@1] aml_sd_emmc_probe: line 3594 [ 2.651855@1] aml_sd_emmc_reg_init 1149 [ 2.654860@1] get property: ocr_avail, value:0x00200080 [ 2.661297@1] get property: f_min, value:400000 [ 2.667404@1] get property: f_max, value:200000000 [ 2.673777@1] get property: max_req_size, value:0x00020000 [ 2.680257@1] get property: pinname, str:sdio [ 2.686027@1] get property: card_type, value:3 [ 2.691751@1] sdio:pdata->caps = 78107 [ 2.695425@1] sdio:pdata->caps2 = 0 [ 2.698882@1] sdio:pdata->pm_caps = 1 [ 2.700090@3] emmc: trying cali 0-th time(s) [ 2.705292@3] emmc: delay[0]= 3600 padding= 2, bidx=3 [ 2.705294@3] emmc: delay[1]= 3600 padding= 2, bidx=3 [ 2.705297@3] emmc: delay[2]= 3400 padding= 3, bidx=3 [ 2.705299@3] emmc: delay[3]= 3800 padding= 1, bidx=3 [ 2.705301@3] emmc: delay[4]= 3800 padding= 1, bidx=3 [ 2.705303@3] emmc: delay[5]= 3800 padding= 1, bidx=3 [ 2.705305@3] emmc: delay[6]= 3600 padding= 2, bidx=3 [ 2.705307@3] emmc: delay[7]= 3800 padding= 1, bidx=3 [ 2.705310@3] emmc: calibration result @ 0: max(3800), min(3400) [ 2.705313@3] emmc: line_delay =0x1000211, max_cal_result =3800 [ 2.705315@3] emmc: base_index_max 3, base_index_min 3 [ 2.705323@3] emmc: clk 100000000 SDR mode tuning start [ 2.706707@3] emmc: rx_tuning_result[0] = 10 [ 2.708050@3] emmc: rx_tuning_result[1] = 10 [ 2.709396@3] emmc: rx_tuning_result[2] = 10 [ 2.710739@3] emmc: rx_tuning_result[3] = 10 [ 2.712078@3] emmc: rx_tuning_result[4] = 10 [ 2.713418@3] emmc: rx_tuning_result[5] = 10 [ 2.714758@3] emmc: rx_tuning_result[6] = 10 [ 2.716101@3] emmc: rx_tuning_result[7] = 10 [ 2.717688@3] emmc: rx_tuning_result[9] = 10 [ 2.717690@3] emmc: best_win_start =9, best_win_size =9 [ 2.717694@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x32000 [ 2.717698@3] emmc: gclock =0x100024a, gdelay=0x1000211, gadjust=0x32000 [ 2.718647@3] emmc: support driver strength type 1 [ 2.719115@3] emmc: try set sd/emmc to DDR mode [ 2.719119@3] emmc: try set sd/emmc to DDR mode [ 2.720134@3] emmc: new HS400 MMC card at address 0001 [ 2.720946@2] emmc: clock 100000000, 8-bit-bus-width [ 2.720946@2] [ 2.720947@2] mmcblk0: emmc:0001 DF4016 14.6 GiB [ 2.721135@2] mmcblk0boot0: emmc:0001 DF4016 partition 1 4.00 MiB [ 2.721331@2] mmcblk0boot1: emmc:0001 DF4016 partition 2 4.00 MiB [ 2.721519@2] mmcblk0rpmb: emmc:0001 DF4016 partition 3 4.00 MiB [ 2.722793@3] mmcblk0: unknown partition table [ 2.723983@2] [mmc_read_partition_tbl] mmc read partition OK! [ 2.723984@2] add_emmc_partition [ 2.724324@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [ 2.724537@2] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [ 2.724735@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000 [ 2.724935@2] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000 [ 2.725112@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000 [ 2.725297@2] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000 [ 2.725491@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000 [ 2.725659@2] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000 [ 2.725834@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000 [ 2.726017@2] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000 [ 2.726206@3] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000 [ 2.726419@2] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000 [ 2.726732@3] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000 [ 2.726926@2] [mmcblk0p14] data offset 0x000097c00000, size 0x000313800000 [ 2.726977@2] card key: card_blk_probe. [ 2.726982@2] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220 [ 2.726986@2] emmc key: emmc_key_init:552 ok. [ 2.730995@2] amlmmc_dtb_init: register dtb chardev [ 2.730995@2] calc 7f3a3eac, store 7f3a3eac [ 2.734770@2] calc 7f3a3eac, store 7f3a3eac [ 2.734773@2] total valid 2 [ 2.735491@3] amlmmc_dtb_init: register dtb chardev OK [ 2.735491@3] Exit aml_emmc_partition_ops OK. [ 2.737465@2] mmcblk0boot1: unknown partition table [ 2.739150@2] mmcblk0boot0: unknown partition table [ 2.739500@3] clear_emmc_wait_flag [ 3.047674@4] [aml_is_card_insert] card OUT [ 3.096490@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 3.096983@1] ion_dev has 1 memory regions [ 3.116735@0] fb: osd_init_module [ 3.116883@0] fb: viu vsync irq: 35 [ 3.117882@0] fb: failed to init reserved memory [ 3.122458@0] fb: osd_probe vinfo:ffffffc001b2d418 [ 3.127208@0] fb: init fbdev bpp is:32 [ 3.131412@1] fb: set osd0 reverse as NONE [ 3.149915@0] fb: osd probe OK [ 3.150142@0] ge2d: ge2d_init_module [ 3.150883@0] ge2d: ge2d_dev major:241 [ 3.154927@1] ge2d: ge2d clock is 400 MHZ [ 3.158579@1] ge2d: ge2d: pdev=ffffffc010331c00, irq=182, rstc=0xffffffc062391940, clk=ffffffc00021a800 [ 3.167923@1] ge2d: mapped phy: 0xd0160000 [ 3.171928@1] ge2d: ge2d start monitor [ 3.175729@3] ge2d: ge2d workqueue monitor start [ 3.176357@2] codec:Amlogic A/V streaming port init [ 3.179624@1] codec:get gate demux control ok ffffffc062396540 [ 3.179635@1] codec:get gate parser_top control ok ffffffc0623965c0 [ 3.179646@1] codec:get gate vpu_intr control ok ffffffc062396640 [ 3.179660@1] codec:get gate vdec control ok ffffffc0623966c0 [ 3.181023@1] codec:[tsync_pcr_init]init success. [ 3.181239@1] codec:amvideocap_probe,amvideocap [ 3.181243@1] codec:use cma buf. [ 3.185588@1] codec:vdec_request_irq ffffffc00156cb78, vsync [ 3.185963@2] codec:create_ge2d_work_queue video task ok [ 3.232160@1] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_addr_phy 67050000 reg_buf ffffffc0623a0000 [ 3.242320@1] rdma_register success, handle 3 table_size 32768 [ 3.248094@1] video_rdma:rdma_init video rdma handle = 3. [ 3.253434@1] codec:used fix clk for vdec clk source! [ 3.258472@1] codec:register clk_set_setting cpu[34] [ 3.263992@2] DI: di_module_init ok. [ 3.266902@2] DI: di_module_init: major 237 [ 3.271236@1] DI: di_probe [ 3.273852@1] deinterlace has 1 memory regions [ 3.278129@1] DI: di reveser memory 0x7d300000, size 30MB. [ 3.278138@1] deinterlace deinterlace.25: assigned reserved memory node linux,di ok [ 3.285687@1] DI-di_probe: get flag_cma error. [ 3.290107@1] di_irq:78,timerc_irq:38 [ 3.293830@1] rdma_register, rdma_table_addr ffffff800017d000 rdma_table_addr_phy 6704a000 reg_buf ffffffc000220000 [ 3.304062@1] rdma_register success, handle 4 table_size 8192 [ 3.309753@1] DI: di_probe allocate rdma channel 4. [ 3.314580@1] DI: DI hw version 2. [ 3.317954@1] 0x000000db:Y=db,U=0,V=0 [ 3.321565@1] 0x000000dc:Y=dc,U=0,V=0 [ 3.325187@1] 0x000000dd:Y=dd,U=0,V=0 [ 3.328814@1] 0x000000de:Y=de,U=0,V=0 [ 3.332432@1] 0x000000df:Y=df,U=0,V=0 [ 3.336055@1] 0x000000e0:Y=e0,U=0,V=0 [ 3.339681@1] 0x000000e1:Y=e1,U=0,V=0 [ 3.343300@1] 0x000000e2:Y=e2,U=0,V=0 [ 3.346926@1] 0x000000e3:Y=e3,U=0,V=0 [ 3.350545@1] 0x000000f0:Y=f0,U=0,V=0 [ 3.354169@1] 0x000000f1:Y=f1,U=0,V=0 [ 3.357794@1] 0x000000f2:Y=f2,U=0,V=0 [ 3.361412@1] 0x000000f3:Y=f3,U=0,V=0 [ 3.365035@1] 0x000000f4:Y=f4,U=0,V=0 [ 3.368661@1] 0x000000f5:Y=f5,U=0,V=0 [ 3.372280@1] 0x000000f6:Y=f6,U=0,V=0 [ 3.375904@1] 0x000000f7:Y=f7,U=0,V=0 [ 3.379529@1] 0x000000f8:Y=f8,U=0,V=0 [ 3.383147@1] 0x000000f9:Y=f9,U=0,V=0 [ 3.386777@1] 0x000000fa:Y=fa,U=0,V=0 [ 3.390392@1] 0x000000fb:Y=fb,U=0,V=0 [ 3.394015@1] 0x000000fc:Y=fc,U=0,V=0 [ 3.398152@2] efusekeynum: 4 [ 3.400490@2] efusekeyname: mac offset: 0 size: 6 [ 3.406882@2] efusekeyname: mac_bt offset: 6 size: 6 [ 3.413252@2] efusekeyname: mac_wifi offset: 12 size: 6 [ 3.419640@2] efusekeyname: usid offset: 18 size: 16 [ 3.426303@1] efuse efuse.10: probe OK! [ 3.430213@2] key unify config unifykey-num is 14 [ 3.434506@2] key unify fact unifykey-num is 14 [ 3.438965@2] aml_unifykeys_probe:1280=============unifykey_devno:eb00000 [ 3.445973@1] 6unifykey: device unifykeys created ok [ 3.447774@5] [aml_is_card_insert] card OUT [ 3.454978@2] 6aml_unifykeys_init done! [ 3.458716@2] PPMGRDRV: warn: ppmgr module init func called [ 3.464383@2] PPMGRDRV: err: ppmgr_driver_probe called [ 3.469320@2] ppmgr has 1 memory regions [ 3.473213@2] PPMGRDRV: info: ppmgr_dev major:234 [ 3.478288@1] PPMGRDRV: info: ppmgr_probe done [ 3.482742@1] amlogic rfkill init [ 3.485655@1] enter bt_probe of_node [ 3.489147@1] not get gpio_en [ 3.491995@1] power on valid level is high [ 3.495878@1] bt: power_on_pin_OD = 0; [ 3.918102@2] audio_dsp: [dsp]register dsp to char divece(257) [ 3.925566@1] amaudio: amaudio: driver amaudio succuess! [ 3.930909@1] [RX]-hdmirx: hdmirx_init. [ 3.931100@1] ESM HLD: Initializing... [ 3.932960@1] ESM HLD: Registering device range 'esm_rx'... [ 3.938762@1] ESM HLD: Device range 'esm_rx' has been registered. [ 3.944516@1] ESM HLD: Creating class /sys/class/elliptic_rx... [ 3.951296@2] ESM HLD: The class /sys/class/elliptic_rx has been created. [ 3.957247@2] ESM HLD: Creating device 'esm_rx'... [ 3.962377@1] ESM HLD: Device 'esm_rx' has been created. [ 3.967157@1] ESM HLD: Done initializing the HLD driver. [ 3.972360@1] module init [ 3.975311@1] [ 3.975311@1] VECM probe start [ 3.980592@2] dolby_vision_init_receiver(dvel) [ 3.984094@2] dolby_vision_init_receiver: dvel [ 3.988574@2] aml_vecm_probe: ok [ 3.993509@1] saradc c1108680.saradc: initialized by BL30 [ 3.997129@1] saradc c1108680.saradc: calibration start: [ 4.002337@1] saradc c1108680.saradc: nominal=0, value=6 [ 4.007621@1] saradc c1108680.saradc: nominal=256, value=250 [ 4.013203@1] saradc c1108680.saradc: nominal=512, value=499 [ 4.018827@1] saradc c1108680.saradc: nominal=768, value=748 [ 4.024414@1] saradc c1108680.saradc: nominal=1023, value=997 [ 4.030083@1] saradc c1108680.saradc: calibration end: coef=4211 [ 4.036594@1] remote: Driver init [ 4.040177@2] gpio-key gpio_keypad.49: gpio_key: 0 name(power) pin() [ 4.045592@2] gpio-key gpio_keypad.49: amlogic_gpio_name_map_num pin 0!:: [ 4.052401@2] gpio-key gpio_keypad.49: gpio_key: 0 power(147) [ 4.058069@2] gpio-key gpio_keypad.49: start setup_timer [ 4.063268@2] gpio-key gpio_keypad.49: power key(116) registed. [ 4.069609@1] input: gpio_keypad as /devices/gpio_keypad.49/input/input0 [ 4.076117@1] gpio-key gpio_keypad.49: gpio keypad register input device completed. [ 4.083500@1] input input0: gpio keypad major:231 [ 4.088768@1] cpuinfo: probe done [ 4.092662@2] input: cec_input as /devices/virtual/input/input1 [ 4.097701@1] cectx aocec: aml_cec_probe(): no hdmirx reg resource [ 4.103286@1] cectx aocec: aml_cec_probe(): no hhi reg resource [ 4.109379@1] cectx aocec: aml_cec_probe(): can't find hdmirx [ 4.116006@1] cec: wake up flag:0 [ 4.120634@2] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe [ 4.127677@1] aml-i2s-dai I2S.41: I2S Mic is in platform! [ 4.130633@2] aml_pcm_dai: pcm mode detection =1 [ 4.156562@2] input input0: key 116 up [ 4.348025@1] aml_snd_card: headphone detection disable=1 [ 4.348249@1] aml_snd_card: no spk event delay time set [ 4.358376@1] aml_snd_m8_card aml_m8_snd.48: T9015-audio-hifi <-> I2S.41 mapping ok [ 4.362605@1] aml_snd_m8_card aml_m8_snd.48: dit-hifi <-> SPDIF.42 mapping ok [ 4.368053@1] aml_pcm: enter aml_pcm_new dai->name: PCM.43 dai->id: 0 [ 4.374827@1] aml_snd_m8_card aml_m8_snd.48: pcm2bt-pcm <-> PCM.43 mapping ok [ 4.381415@1] aml_snd_m8_card aml_m8_snd.48: ASoC: no source widget found for LOUTL [ 4.388860@1] aml_snd_m8_card aml_m8_snd.48: ASoC: Failed to add route LOUTL -> direct -> Ext Spk [ 4.397640@1] aml_snd_m8_card aml_m8_snd.48: ASoC: no source widget found for LOUTR [ 4.405191@1] aml_snd_m8_card aml_m8_snd.48: ASoC: Failed to add route LOUTR -> direct -> Ext Spk [ 4.421825@0] TCP: cubic registered [ 4.422148@2] aml_snd_card: audio use jtag pinmux as i2s output, read val =0 [ 4.435438@3] NET: Registered protocol family 10 [ 4.439539@3] NET: Registered protocol family 17 [ 4.441552@3] Key type dns_resolver registered [ 4.451010@3] Registering SWP/SWPB emulation handler [ 4.454768@3] regulator-dummy: disabling [ 5.160675@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.161003@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 5.172043@0] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000 [ 5.175478@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.181687@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.189181@0] usb usb1: Product: xHCI Host Controller [ 5.193888@0] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd [ 5.199587@0] usb usb1: SerialNumber: xhci-hcd.0.auto [ 5.208740@1] hub 1-0:1.0: USB hub found [ 5.209151@2] hub 1-0:1.0: 3 ports detected [ 5.214399@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.218314@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 5.226949@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.232795@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.240229@2] usb usb2: Product: xHCI Host Controller [ 5.245118@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd [ 5.250786@2] usb usb2: SerialNumber: xhci-hcd.0.auto [ 5.257472@7] hub 2-0:1.0: USB hub found [ 5.259593@7] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 5.271069@6] console [netcon0] enabled [ 5.271239@6] netconsole: network logging started [ 5.275448@6] aml_vrtc rtc.33: setting system clock to 2015-01-01 00:00:12 UTC (1420070412) [ 5.293982@6] gxbb_pm: enter meson_pm_probe! [ 5.294358@6] gxbb_pm: meson_pm_probe done [ 5.302498@6] cpucore_cooling_register, max_cpu_core_num:4 [ 5.303811@6] cpucore_cooling_register, max_cpu_core_num:4 [ 5.326282@6] aml_istbt_dev_ready NULL [ 5.326681@6] ALSA device list: [ 5.327622@6] #0: AML-M8AUDIO [ 5.334382@6] Freeing unused kernel memory: 908K (ffffffc0019e4000 - ffffffc001ac7000) [ 5.516988@1] fb: use ion buffer for fb memory [ 5.518194@1] meson-fb meson-fb.15: create ion_client ffffffc00034fcc0, handle=ffffffc061e673c0 [ 5.518215@1] meson-fb meson-fb.15: ion memory(0): created fb at 0x0000000079300000, size 24 MiB [ 5.518226@1] fb: Frame buffer memory assigned at [ 5.518239@1] fb: 0, phy: 0x0000000079300000, vir:0xffffff8001cf5000, size=24900K [ 5.518239@1] [ 5.518254@1] fb: ---------------clear fb0 memory ffffff8001cf5000 [ 5.527047@4] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.537859@7] fb: osd[0] canvas.idx =0x40 [ 5.537918@7] fb: osd[0] canvas.addr=0x79300000 [ 5.537965@7] fb: osd[0] canvas.width=7680 [ 5.538008@7] fb: osd[0] canvas.height=3240 [ 5.538051@7] fb: osd[0] frame.width=1920 [ 5.538093@7] fb: osd[0] frame.height=1080 [ 5.550126@3] fb: osd[0] canvas.idx =0x40 [ 5.550131@3] fb: osd[0] canvas.addr=0x79300000 [ 5.550136@3] fb: osd[0] canvas.width=7680 [ 5.550139@3] fb: osd[0] canvas.height=2160 [ 5.550142@3] fb: osd[0] frame.width=1920 [ 5.550145@3] fb: osd[0] frame.height=1080 [ 5.569521@2] fb: use ion buffer for fb memory [ 5.569661@2] meson-fb meson-fb.15: create ion_client ffffffc00034fcc0, handle=ffffffc0623c9d40 [ 5.569674@2] meson-fb meson-fb.15: ion memory(1): created fb at 0x000000007ab51000, size 1 MiB [ 5.569681@2] fb: Frame buffer memory assigned at [ 5.569691@2] fb: 1, phy: 0x000000007ab51000, vir:0xffffff8003547000, size=1024K [ 5.569691@2] [ 5.569702@2] fb: fb1 open, logo index:1 [ 5.600199@5] codec:free_alloced_keep_buffer (null). (null). (null) [ 5.600694@5] vfm_map_store:rm default [ 5.600694@5] [ 5.600937@5] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 5.600937@5] [ 5.601224@5] fb: osd[0] enable: 1 (sh) [ 5.616989@5] fb: osd[1] enable: 0 (sh) [ 5.667504@7] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 5.667550@7] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.667578@7] usb 1-1: Product: USB 2.0 Hub [ 5.675101@7] hub 1-1:1.0: USB hub found [ 5.675313@7] hub 1-1:1.0: 4 ports detected [ 5.733563@1] Console: switching to colour frame buffer device 240x67 [ 5.791419@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0 [ 5.892235@2] dwc_otg: Core Release: 3.10a [ 5.892259@2] dwc_otg: Setting default values for core params [ 5.892280@2] dwc_otg: curmode: 0, host_only: 0 [ 5.904633@2] dwc_otg: Using Buffer DMA mode [ 5.904641@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 5.904647@2] dwc_otg: Working on port type = SLAVE [ 5.904676@2] dwc_otg: Dedicated Tx FIFOs mode [ 5.976716@4] usb 1-1.3: new low-speed USB device number 3 using xhci-hcd [ 6.039633@0] EXT4-fs (mmcblk0p13): couldn't mount as ext3 due to feature incompatibilities [ 6.040175@0] EXT4-fs (mmcblk0p13): couldn't mount as ext2 due to feature incompatibilities [ 6.043366@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null) [ 6.100036@6] usb 1-1.3: New USB device found, idVendor=0e8f, idProduct=2517 [ 6.100062@6] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.101906@7] usb 1-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.101944@7] usb 1-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.127574@4] input: HID 0e8f:2517 as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:0E8F:2517.0001/input/input2 [ 6.128274@4] hid-generic 0003:0E8F:2517.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0e8f:2517] on usb-xhci-hcd.0.auto-1.3/input0 [ 6.135705@4] input: HID 0e8f:2517 as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:0E8F:2517.0002/input/input3 [ 6.136669@4] hid-generic 0003:0E8F:2517.0002: input,hidraw1: USB HID v1.10 Mouse [HID 0e8f:2517] on usb-xhci-hcd.0.auto-1.3/input1 [ 6.352450@3] EXT4-fs (mmcblk0p14): couldn't mount as ext3 due to feature incompatibilities [ 6.353189@3] EXT4-fs (mmcblk0p14): couldn't mount as ext2 due to feature incompatibilities [ 6.359707@3] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null) [ 7.825784@0] systemd[1]: System time before build time, advancing clock. [ 7.860262@1] systemd[1]: systemd 237 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 7.860608@1] systemd[1]: Detected architecture arm64. [ 7.862667@1] systemd[1]: Set hostname to . [ 7.892540@3] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.892564@3] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.951909@3] random: systemd urandom read with 97 bits of entropy available [ 7.952791@3] systemd[1]: Created slice User and Session Slice. [ 7.953156@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.953554@3] systemd[1]: Created slice System Slice. [ 7.954071@3] systemd[1]: Listening on Journal Socket. [ 7.954877@3] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.957745@3] systemd[1]: Starting Debug Shell on /dev/ttyS0... [ 7.957812@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 7.961207@3] systemd[1]: Mounting POSIX Message Queue File System... [ 7.962305@3] systemd[1]: Listening on udev Control Socket. [ 7.963732@3] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.967929@3] systemd[1]: Starting Samba Configuration... [ 7.971398@3] systemd[1]: Mounting Variable Directory... [ 7.972557@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.972857@3] systemd[1]: Reached target RPC Port Mapper. [ 7.977053@3] systemd[1]: Mounting Kernel Debug File System... [ 7.978788@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.979158@3] systemd[1]: Reached target Paths. [ 7.983261@3] systemd[1]: Starting Show Version... [ 7.983679@3] systemd[1]: Reached target Slices. [ 7.984542@3] systemd[1]: Listening on udev Kernel Socket. [ 8.024684@2] systemd[1]: Started Debug Shell on /dev/ttyS0. [ 8.026825@2] systemd[1]: Mounted POSIX Message Queue File System. [ 8.029720@2] systemd[1]: Started Samba Configuration. [ 8.031190@2] systemd[1]: Mounted Variable Directory. [ 8.032646@5] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 8.032662@2] systemd[1]: Mounted Kernel Debug File System. [ 8.034222@2] systemd[1]: Started Show Version. [ 8.040651@2] systemd[1]: Starting Create kernel modules tree from overlays... [ 8.062414@1] kernel-overlays-setup: setup base modules [ 8.089871@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29 [ 8.137992@6] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 8.138278@6] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 8.141074@6] kernel-overlays-setup: done [ 8.142645@2] systemd[1]: Started Create kernel modules tree from overlays. [ 8.144787@2] systemd[1]: Starting Setup machine-id... [ 8.149585@5] systemd[1]: Starting Load Kernel Modules... [ 8.152205@5] systemd[1]: Starting udev Coldplug all Devices... [ 8.155329@5] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.159014@5] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.162740@5] systemd[1]: Starting Mounting swapfile... [ 8.164473@5] systemd[1]: Started Setup machine-id. [ 8.166102@5] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.170979@5] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.174530@5] systemd[1]: Starting Journal Service... [ 8.175681@5] systemd[1]: Started Remount Root and Kernel File Systems. [ 8.180724@0] Linux video capture interface: v2.00 [ 8.187919@0] amlvid:err: amlvideo_init called [ 8.187929@0] amlvid:err: amlvideo_create_instance called [ 8.187939@0] amlvid:err: v4l2_dev.name=:amlvideo-000 [ 8.188316@0] amlvideo-000: V4L2 device registered as video10 [ 8.195184@0] Registered IR keymap rc-empty [ 8.195811@0] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input4 [ 8.196220@0] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0 [ 8.201107@4] systemd[1]: Started Create Static Device Nodes in /dev. [ 8.202220@4] systemd[1]: Reached target Local File Systems (Pre). [ 8.203120@0] IR NEC protocol handler initialized [ 8.204576@0] IR RC6 protocol handler initialized [ 8.207703@6] IR RC5(x) protocol handler initialized [ 8.207796@2] meson-ir c8100580.meson-ir: receiver initialized [ 8.208879@1] IR JVC protocol handler initialized [ 8.209836@1] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input5 [ 8.210764@1] IR MCE Keyboard/mouse protocol handler initialized [ 8.210866@0] IR SANYO protocol handler initialized [ 8.211015@5] IR Sony protocol handler initialized [ 8.212472@2] Triggered SDIO WiFi power on and bus rescan. [ 8.212501@2] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240 [ 8.216306@2] lirc_dev: IR Remote Control driver registered, major 229 [ 8.218687@2] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0 [ 8.218700@2] IR LIRC bridge handler initialized [ 8.227881@6] systemd[1]: Started Mounting swapfile. [ 8.228583@6] systemd[1]: Reached target Swap. [ 8.231693@6] systemd[1]: Mounting Temporary Directory (/tmp)... [ 8.241469@6] systemd[1]: Mounted Temporary Directory (/tmp). [ 8.242209@6] systemd[1]: Reached target Local File Systems. [ 8.245458@6] systemd[1]: Starting Rebuild Journal Catalog... [ 8.258183@6] systemd[1]: Started Rebuild Journal Catalog. [ 8.301403@6] systemd[1]: Started Journal Service. [ 8.327630@3] systemd-journald[1837]: Received request to flush runtime journal from PID 1 [ 8.516560@0] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240 [ 8.531357@2] random: nonblocking pool is initialized [ 8.828392@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff [ 8.828416@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8 [ 8.828545@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52 [ 8.829727@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff [ 8.829734@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8 [ 8.829822@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52 [ 8.834870@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff [ 8.834893@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8 [ 8.834977@6] aml_sd_emmc_data_thread 2639 sdio: cmd:8 [ 8.863022@7] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 8.865794@7] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.868592@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.873558@4] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 8.879639@7] sdio: queuing unknown CIS tuple 0x81 (9 bytes) [ 8.971337@7] sdio: clk 200000000 SDR mode tuning start [ 8.971925@7] sdio: rx_tuning_result[0] = 10 [ 8.972483@7] sdio: rx_tuning_result[1] = 10 [ 8.973038@7] sdio: rx_tuning_result[2] = 10 [ 8.973590@7] sdio: rx_tuning_result[3] = 10 [ 8.973667@7] sdio: best_win_start =0, best_win_size =4 [ 8.973692@7] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 [ 8.973721@7] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 [ 8.983499@5] sdio: queuing unknown CIS tuple 0x91 (3 bytes) [ 8.983609@5] sdio: new ultra high speed SDR104 SDIO card at address 0001 [ 8.983633@6] sdio: clock 200000000, 4-bit-bus-width [ 8.983633@6] [ 8.985372@6] [sdio_reinit] finish [ 9.217546@0] Console: switching to colour dummy device 80x25 [ 9.232877@2] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.267432@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.349008@4] ftrace: Allocated trace_printk buffers [ 9.357819@3] mali d00c0000.t82x: Continuing without Mali regulator control [ 9.357931@3] mali d00c0000.t82x: set min pp to default 1 [ 9.357937@3] mali d00c0000.t82x: set min clk default to 0 [ 9.358015@3] mali d00c0000.t82x: dvfs table is 6 [ 9.358021@3] mali d00c0000.t82x: dvfs table addr ffffffc05c407218, ele size=48 [ 9.358027@3] mali d00c0000.t82x: max clk set 4 [ 9.358031@3] mali d00c0000.t82x: turbo clk set to 5 [ 9.358036@3] mali d00c0000.t82x: default clk set to 2 [ 9.358103@3] mali_plat=ffffffbffc16ab50 [ 9.376977@3] gpu cooling register okay with err=0 [ 9.377936@3] gpu core cooling register okay with err=0 [ 9.378120@3] gpu_power_main, 63 [ 9.378447@3] mali d00c0000.t82x: GPU identified as 0x0820 r1p0 status 0 [ 9.397209@5] mali d00c0000.t82x: Probed as mali0 [ 9.435538@2] cfg80211: Calling CRDA to update world regulatory domain [ 9.441457@2] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.461600@1] dhd_module_init: in [ 9.461630@1] ======== bcm_wlan_set_plat_data ======== [ 9.461634@1] host_oob_irq: 100 [ 9.461637@1] host_oob_irq_flags=0x414 [ 9.461640@1] dhd_wifi_platform_load: Enter [ 9.461664@1] Power-up adapter 'DHD generic adapter' [ 9.461668@1] wifi_platform_set_power = 1 [ 9.461672@1] ======== PULL WL_REG_ON HIGH! ======== [ 9.461698@1] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240 [ 9.661744@1] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240 [ 9.979884@0] 8021q: 802.1Q VLAN Support v1.8 [ 10.166534@1] wifi_platform_bus_enumerate device present 1 [ 10.166549@1] ======== Card detection to detect SDIO card! ======== [ 10.166553@1] sdio_reset_comm(): [ 10.194534@7] sdio: queuing unknown CIS tuple 0x80 (2 bytes) [ 10.197189@7] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 10.199793@7] sdio: queuing unknown CIS tuple 0x80 (3 bytes) [ 10.204446@7] sdio: queuing unknown CIS tuple 0x80 (7 bytes) [ 10.296849@5] sdio: clk 200000000 SDR mode tuning start [ 10.297168@5] sdio: rx_tuning_result[0] = 10 [ 10.297406@5] sdio: rx_tuning_result[1] = 10 [ 10.297658@4] sdio: rx_tuning_result[2] = 10 [ 10.297897@4] sdio: rx_tuning_result[3] = 10 [ 10.297928@4] sdio: best_win_start =0, best_win_size =4 [ 10.297935@4] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 [ 10.297943@4] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 [ 10.297949@4] [sdio_reinit] finish [ 10.314628@4] bcmsdh_register: register client driver [ 10.314755@4] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 10.314832@4] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 10.314838@4] bus num (host idx)=0, slot num (rca)=1 [ 10.314844@4] found adapter info 'DHD generic adapter' [ 10.314895@4] sdioh_attach: set sd_f2_blocksize 256 [ 10.315255@4] dhdsdio_probe : no mutex held. set lock [ 10.315449@4] F1 signature read @0x18000000=0x15264345 [ 10.319084@5] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 [ 10.319947@5] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 10.320029@5] wifi_platform_get_mac_addr [ 10.320035@5] ======== bcm_wlan_get_mac_address ======== [ 10.320040@5] custom wifi mac is not set [ 10.320054@5] dhd_conf_set_chiprev: chip=0x4345, chiprev=6 [ 10.320108@5] dhd_conf_set_conf_path_by_nv_path: config_path=/usr/lib/firmware/brcm/config.txt [ 10.320494@5] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (399 bytes) open success [ 10.322938@5] dhd_conf_read_nv_by_chip: nv_by_chip_count=12 [ 10.322954@5] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 10.322960@5] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 10.322966@5] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 10.322972@5] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 10.322978@5] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 10.322984@5] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 10.322990@5] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 10.322996@5] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 10.323001@5] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 10.323007@5] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 10.323013@5] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359sa.txt [ 10.323019@5] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 10.323111@5] dhd_conf_read_config: mimo_bw_cap = 1 [ 10.323572@5] dhd_conf_read_config: bcn_timeout = 20 [ 10.323733@5] dhd_conf_read_config: kso_enable = 0 [ 10.324188@5] dhd_conf_read_config: PM = 0 [ 10.325391@5] wl_create_event_handler(): thread:wl_event_handler:b79 started [ 10.325396@0] tsk Enter, tsk = 0xffffff80041d28d0 [ 10.326129@5] dhd_attach(): thread:dhd_watchdog_thread:b7b started [ 10.326185@5] dhd_attach(): thread:dhd_dpc:b7c started [ 10.326681@5] dhd_attach(): thread:dhd_rxf:b7d started [ 10.326703@5] dhd_deferred_work_init: work queue initialized [ 10.338313@7] Dongle Host Driver, version 1.363.59.144.2.git (r) [ 10.339777@7] Register interface [wlan0] MAC: ac:83:f3:69:3f:58 [ 10.339777@7] [ 10.339824@0] wl_event_handler: was terminated [ 10.339852@7] wl_destroy_event_handler(): thread:wl_event_handler:b79 terminated OK [ 10.339862@7] dhd_wl_ioctl: returning as busstate=0 [ 10.339944@7] bcmsdh_oob_intr_unregister: Enter [ 10.339950@7] bcmsdh_oob_intr_unregister: irq is not registered [ 10.339964@7] dhd_txglom_enable: enable 0 [ 10.339970@7] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0 [ 10.339974@7] dhd_conf_set_txglom_params: txglom_bucket_size=0 [ 10.339979@7] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1 [ 10.339984@7] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0 [ 10.339990@7] sdioh_set_mode: set txglom_mode to multi-desc [ 10.339995@7] dhd_bus_devreset: WLAN OFF DONE [ 10.340052@7] wifi_platform_set_power = 0 [ 10.340057@7] ======== PULL WL_REG_ON LOW! ======== [ 10.340063@7] dhdsdio_probe : the lock is released. [ 10.340183@7] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter [ 10.340404@7] dhd_module_init: Exit err=0 [ 10.341289@4] dhd_open: Enter ffffffc058031000 [ 10.341310@4] [ 10.341310@4] Dongle Host Driver, version 1.363.59.144.2.git (r) [ 10.341319@4] wl_android_wifi_on in 1 [ 10.341324@4] wl_android_wifi_on in 2: g_wifi_on=0 [ 10.341330@4] wifi_platform_set_power = 1 [ 10.341334@4] ======== PULL WL_REG_ON HIGH! ======== [ 10.341366@4] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240 [ 10.361424@7] Bluetooth: Core ver 2.18 [ 10.361611@7] NET: Registered protocol family 31 [ 10.361620@7] Bluetooth: HCI device and connection manager initialized [ 10.361653@7] Bluetooth: HCI socket layer initialized [ 10.361664@7] Bluetooth: L2CAP socket layer initialized [ 10.375818@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600 [ 10.375882@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 9600 [ 10.375908@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200 [ 10.541421@4] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240 [ 10.999191@2] codec:vdec_create instance ffffff800429e000, total 1 [ 11.046504@4] sdio_reset_comm(): [ 11.175634@4] sdio: clk 200000000 SDR mode tuning start [ 11.175896@4] sdio: rx_tuning_result[0] = 10 [ 11.176140@4] sdio: rx_tuning_result[1] = 10 [ 11.176381@4] sdio: rx_tuning_result[2] = 10 [ 11.176648@7] sdio: rx_tuning_result[3] = 10 [ 11.176682@7] sdio: best_win_start =0, best_win_size =4 [ 11.176689@7] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 [ 11.176697@7] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 [ 11.176750@7] sdioh_start: set sd_f2_blocksize 256 [ 11.177104@7] [ 11.177104@7] [ 11.177104@7] dhd_bus_devreset: == WLAN ON == [ 11.177220@7] F1 signature read @0x18000000=0x15264345 [ 11.180375@7] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 [ 11.181008@7] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 [ 11.181341@7] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (399 bytes) open success [ 11.181873@7] dhd_conf_read_nv_by_chip: nv_by_chip_count=12 [ 11.181880@7] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt [ 11.181886@7] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt [ 11.181892@7] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt [ 11.181898@7] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt [ 11.181904@7] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt [ 11.181910@7] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt [ 11.181916@7] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt [ 11.181922@7] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt [ 11.181927@7] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt [ 11.181933@7] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt [ 11.181939@7] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359sa.txt [ 11.181945@7] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt [ 11.182035@7] dhd_conf_read_config: mimo_bw_cap = 1 [ 11.182479@7] dhd_conf_read_config: bcn_timeout = 20 [ 11.182638@7] dhd_conf_read_config: kso_enable = 0 [ 11.183093@7] dhd_conf_read_config: PM = 0 [ 11.183335@7] dhd_conf_set_fw_name_by_chip: firmware_path=/usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin [ 11.183341@7] dhd_conf_set_nv_name_by_chip: nvram_path=/usr/lib/firmware/brcm/nvram_ap6255.txt [ 11.183347@7] dhdsdio_download_firmware: set use_rxchain 0 [ 11.183352@7] dhdsdio_download_firmware: set txglomsize 36 [ 11.183356@7] Final fw_path=/usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin [ 11.183360@7] Final nv_path=/usr/lib/firmware/brcm/nvram_ap6255.txt [ 11.183364@7] Final conf_path=/usr/lib/firmware/brcm/config.txt [ 11.183829@7] dhd_os_open_image: /usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin (483181 bytes) open success [ 11.241182@7] dhd_os_open_image: /usr/lib/firmware/brcm/nvram_ap6255.txt (1644 bytes) open success [ 11.242710@7] NVRAM version: AP6255_NVRAM_V1.0_29052015 [ 11.243234@7] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 11.321286@7] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 11.321434@7] bcmsdh_oob_intr_register: Enter [ 11.321439@7] bcmsdh_oob_intr_register: HW_OOB enabled [ 11.321444@7] bcmsdh_oob_intr_register OOB irq=100 flags=0x414 [ 11.321449@7] bcmsdh_oob_intr_register change flags to 0x4 [ 11.321467@7] bcmsdh_oob_intr_register: disable_irq_wake [ 11.322152@7] Disable tdls_auto_op failed. -1 [ 11.322160@7] dhd_conf_set_fw_int_cmd: set WLC_SET_BAND 142 0 [ 11.322767@7] dhd_preinit_ioctls: Set tcpack_sup_mode 0 [ 11.322786@7] wifi_platform_get_mac_addr [ 11.322792@7] ======== bcm_wlan_get_mac_address ======== [ 11.322796@7] custom wifi mac is not set [ 11.324626@7] Firmware up: op_mode=0x0005, MAC=ac:83:f3:69:3f:58 [ 11.324633@7] dhd_conf_set_country: set country SG, revision 0 [ 11.364192@7] Country code: SG (SG/0) [ 11.364525@7] dhd_conf_set_fw_string_cmd: set roam_off 1 [ 11.366714@5] dhd_conf_set_fw_string_cmd: set mimo_bw_cap 1 [ 11.372801@5] Firmware version = wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e [ 11.372816@5] Driver: 1.363.59.144.2.git (r) [ 11.372816@5] Firmware: wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e [ 11.373026@5] dhd_txglom_enable: enable 1 [ 11.373033@5] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0 [ 11.373038@5] dhd_conf_set_txglom_params: txglom_bucket_size=0 [ 11.373044@5] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=36, bus_txglom=-1 [ 11.373048@5] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0 [ 11.373054@5] sdioh_set_mode: set txglom_mode to multi-desc [ 11.373059@5] dhd_conf_set_disable_proptx: set disable_proptx 0 [ 11.373529@5] wl_android_wifi_on: Success [ 11.374150@5] wl_create_event_handler(): thread:wl_event_handler:b9d started [ 11.374164@3] tsk Enter, tsk = 0xffffff80041d28d0 [ 11.410250@4] wl_host_event: Invalid ifidx 0 for wl0 [ 11.410371@4] wl_host_event: Invalid ifidx 0 for wl0 [ 11.413446@5] CFG80211-ERROR) wl_update_wiphybands : error reading txbf_bfe_cap (-23) [ 11.413939@5] CFG80211-ERROR) wl_update_wiphybands : error reading txbf_bfr_cap (-23) [ 11.432399@5] dhd_open: Exit ret=0 [ 11.432793@7] Bluetooth: SCO socket layer initialized [ 11.435738@4] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 12.001217@6] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 12.001285@6] aml_spdif_dai: share the same clock [ 12.001298@6] aml_audio_hw: IEC958 PCM32 [ 12.001306@6] hdmitx: audio: aout notify rate 44100 [ 12.001311@6] hdmitx: audio: aout notify size 32 [ 12.001317@6] hdmitx: audio: aout notify format CT_PCM [ 12.001322@6] hdmtix: set audio [ 12.001339@6] hdmitx tx_aud_src = 0 [ 12.001370@6] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 12.001375@6] hdmitx aud_n_para = 6272 [ 12.001397@6] hdmitx set channel status [ 12.001466@6] hdmitx: audio: Audio Type: PCM [ 12.001470@6] hdmitx: audio: set audio param [ 12.001482@6] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source [ 12.001786@6] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 12.001793@6] aml_spdif_dai: share the same clock [ 12.001802@6] aml_audio_hw: IEC958 PCM32 [ 12.001809@6] hdmitx: audio: aout notify rate 44100 [ 12.001813@6] hdmitx: audio: aout notify size 32 [ 12.001817@6] hdmitx: audio: no update [ 12.001827@6] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source [ 12.002067@6] channel count should be 8, we got 2 aborting [ 12.004480@6] aml_snd_m8_card aml_m8_snd.48: I2S playback enable [ 12.004499@6] aml_snd_m8_card aml_m8_snd.48: IEC958 playback enable [ 12.170484@0] vout_serve: vmode set to null [ 12.170524@0] fb: current vmode=1080p60hz, cmd: 0x50000 [ 12.170537@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=59 [ 12.170543@0] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60 [ 12.170555@0] tv_vout: 3Invalid video output modes. [ 12.170559@0] tv_vout: new mode =null set ok [ 12.170563@0] vout_serve: vinfo mode is: null [ 12.170567@0] vout_serve: new mode null set ok [ 12.170579@0] hdmitx: edid: not find mapped vic [ 12.170586@0] hdmitx: video: get current mode: null [ 12.170590@0] hdmitx: update rx hdr info 5 [ 12.170594@0] hdmitx: update physcial size: 1600 900 [ 12.170598@0] hdmitx: video: null not valid hdmi mode [ 12.170622@0] fb: current vmode=null, cmd: 0x10000 [ 12.183372@0] hdmitx: set frac_rate_policy as 0 [ 12.183394@0] vout_serve: vmode set to 1080p60hz [ 12.183411@0] vout_serve: disable HDMI PHY as soon as possible [ 12.183415@0] fb: current vmode=null, cmd: 0x50000 [ 12.183421@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16 [ 12.183425@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 12.183436@0] tv_vout: TV mode 1080p60hz selected. [ 12.183440@0] [ 12.183440@0] vdac_enable: on:0,module_sel:8 [ 12.183450@0] [ 12.183450@0] vdac_enable: on:0,module_sel:8 [ 12.183458@0] tv_vout: new mode =1080p60hz set ok [ 12.183462@0] vout_serve: vinfo mode is: 1080p60hz [ 12.183465@0] vout_serve: new mode 1080p60hz set ok [ 12.183482@0] hdmitx: video: get current mode: 1080p60hz [ 12.183485@0] hdmitx: update rx hdr info 5 [ 12.183488@0] hdmitx: update physcial size: 1600 900 [ 12.183532@0] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 12.183537@0] hdmitx: rx has SCDC present indicator [ 12.185550@0] hdmirx version is 2.0 [ 12.185553@0] hdmitx div40: 0 [ 12.206529@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 12.206533@0] hdmitx: system: set pll [ 12.206536@0] hdmitx: system: param->VIC:16 [ 12.206541@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0 [ 12.206549@0] config HPLL = 2970000 [ 12.206571@0] HPLL: 0xc000027b [ 12.206573@0] config HPLL done [ 12.206582@0] set_hpll_od3_clk_div[437] div = 6 [ 12.206590@0] j = 4 vid_clk_div = 1 [ 12.206600@0] hdmitx: set enc for VIC: 16 [ 12.206618@0] hdmitx_set_hw[4947] set VIC = 16 [ 12.206825@0] hdmitx: system: irq 80000001 [ 12.222618@0] Start = 0x10000100 End = 0x100001ff [ 12.222629@0] [0x10000104]: 0x00000001 [ 12.222803@0] [0x10000180]: 0x000000ff [ 12.222807@0] [0x10000181]: 0x000000ff [ 12.222812@0] [0x10000182]: 0x00000003 [ 12.222816@0] [0x10000183]: 0x00000007 [ 12.222821@0] [0x10000184]: 0x0000003f [ 12.222825@0] [0x10000185]: 0x00000002 [ 12.222831@0] [0x10000187]: 0x000000ff [ 12.222835@0] [0x10000188]: 0x00000003 [ 12.338504@0] hdmitx: system: PHY Setting Done [ 12.342528@0] Sink is HDMI device [ 12.342544@0] hdmitx: system: packet: can't get vendor data [ 12.342551@0] 1080p60hz 60 1 [ 12.342557@0] 1080p60hz 60 1 [ 12.342562@0] hdmtix: set audio [ 12.342574@0] hdmitx tx_aud_src = 0 [ 12.342606@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 12.342611@0] hdmitx aud_n_para = 6272 [ 12.342634@0] hdmitx set channel status [ 12.342703@0] hdmitx: audio: Audio Type: PCM [ 12.342724@0] fb: current vmode=1080p60hz, cmd: 0x10000 [ 12.389946@4] fb: osd[0] canvas.idx =0x40 [ 12.389949@4] fb: osd[0] canvas.addr=0x79300000 [ 12.389951@4] fb: osd[0] canvas.width=7680 [ 12.389953@4] fb: osd[0] canvas.height=3240 [ 12.389955@4] fb: osd[0] frame.width=1920 [ 12.389957@4] fb: osd[0] frame.height=1080 [ 12.812303@2] vout_serve: vmode set to null [ 12.812339@2] vout_serve: disable HDMI PHY as soon as possible [ 12.812345@2] fb: current vmode=1080p60hz, cmd: 0x50000 [ 12.812358@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=59 [ 12.812364@2] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60 [ 12.812377@2] tv_vout: 3Invalid video output modes. [ 12.812381@2] tv_vout: new mode =null set ok [ 12.812384@2] vout_serve: vinfo mode is: null [ 12.812388@2] vout_serve: new mode null set ok [ 12.812400@2] hdmitx: edid: not find mapped vic [ 12.812407@2] hdmitx: video: get current mode: null [ 12.812410@2] hdmitx: update rx hdr info 5 [ 12.812414@2] hdmitx: update physcial size: 1600 900 [ 12.812417@2] hdmitx: video: null not valid hdmi mode [ 12.812441@2] fb: current vmode=null, cmd: 0x10000 [ 12.823009@0] hdmitx: set frac_rate_policy as 0 [ 12.823032@0] vout_serve: vmode set to 1080p60hz [ 12.823046@0] vout_serve: disable HDMI PHY as soon as possible [ 12.823051@0] fb: current vmode=null, cmd: 0x50000 [ 12.823057@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16 [ 12.823061@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 12.823069@0] tv_vout: TV mode 1080p60hz selected. [ 12.823074@0] [ 12.823074@0] vdac_enable: on:0,module_sel:8 [ 12.823085@0] [ 12.823085@0] vdac_enable: on:0,module_sel:8 [ 12.823093@0] tv_vout: new mode =1080p60hz set ok [ 12.823096@0] vout_serve: vinfo mode is: 1080p60hz [ 12.823100@0] vout_serve: new mode 1080p60hz set ok [ 12.823115@0] hdmitx: video: get current mode: 1080p60hz [ 12.823118@0] hdmitx: update rx hdr info 5 [ 12.823122@0] hdmitx: update physcial size: 1600 900 [ 12.823163@0] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 12.823168@0] hdmitx: rx has SCDC present indicator [ 12.825181@0] hdmirx version is 2.0 [ 12.825185@0] hdmitx div40: 0 [ 12.846485@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 12.846491@0] hdmitx: system: set pll [ 12.846494@0] hdmitx: system: param->VIC:16 [ 12.846499@0] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0 [ 12.846507@0] config HPLL = 2970000 [ 12.846527@0] HPLL: 0xc000027b [ 12.846529@0] config HPLL done [ 12.846538@0] set_hpll_od3_clk_div[437] div = 6 [ 12.846546@0] j = 4 vid_clk_div = 1 [ 12.846556@0] hdmitx: set enc for VIC: 16 [ 12.846574@0] hdmitx_set_hw[4947] set VIC = 16 [ 12.978494@0] hdmitx: system: PHY Setting Done [ 12.982515@0] Sink is HDMI device [ 12.982531@0] hdmitx: system: packet: can't get vendor data [ 12.982536@0] 1080p60hz 60 1 [ 12.982543@0] 1080p60hz 60 1 [ 12.982548@0] hdmtix: set audio [ 12.982560@0] hdmitx tx_aud_src = 0 [ 12.982591@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 12.982597@0] hdmitx aud_n_para = 6272 [ 12.982619@0] hdmitx set channel status [ 12.982686@0] hdmitx: audio: Audio Type: PCM [ 12.982709@0] fb: current vmode=1080p60hz, cmd: 0x10000 [ 12.996313@5] fb: osd[0] canvas.idx =0x40 [ 12.996315@5] fb: osd[0] canvas.addr=0x79300000 [ 12.996317@5] fb: osd[0] canvas.width=7680 [ 12.996319@5] fb: osd[0] canvas.height=2160 [ 12.996320@5] fb: osd[0] frame.width=1920 [ 12.996322@5] fb: osd[0] frame.height=1080 [ 13.046472@5] fb: osd[0] canvas.idx =0x40 [ 13.046495@5] fb: osd[0] canvas.addr=0x79300000 [ 13.046498@5] fb: osd[0] canvas.width=7680 [ 13.046499@5] fb: osd[0] canvas.height=3240 [ 13.046501@5] fb: osd[0] frame.width=1920 [ 13.046503@5] fb: osd[0] frame.height=1080 [ 13.836756@4] libphy: stmmac-0:00 - Link is Up - 1000/Full [ 13.836786@4] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.665202@5] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000 [ 16.671393@0] Bluetooth: HCI UART driver ver 2.2 [ 16.671407@0] Bluetooth: HCI H4 protocol initialized [ 16.671412@0] Bluetooth: HCI BCSP protocol initialized [ 16.671416@0] Bluetooth: HCILL protocol initialized [ 16.671421@0] Bluetooth: HCIATH3K protocol initialized [ 16.671425@0] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 72.375048@0] aml_snd_m8_card aml_m8_snd.48: I2S playback disable [ 72.375068@0] aml_snd_m8_card aml_m8_snd.48: IEC958 playback disable [ 72.375133@4] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 72.375151@4] aml_spdif_dai: share the same clock [ 72.375162@4] aml_audio_hw: IEC958 PCM32 [ 72.375170@4] hdmitx: audio: aout notify rate 44100 [ 72.375175@4] hdmitx: audio: aout notify size 32 [ 72.375180@4] hdmitx: audio: no update [ 72.375190@4] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source LibreELEC:~ #