################################################################################ # ... output of dmesg # LibreELEC release: S912.arm-8.90.3 # ################################################################################ [ 0.000000@0] Initializing cgroup subsys cpuset [ 0.000000@0] Initializing cgroup subsys cpu [ 0.000000@0] Initializing cgroup subsys cpuacct [ 0.000000@0] Linux version 3.14.29 (adamg@sagrod.schiznik.net) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Tue Jan 23 18:31:12 GMT 2018 [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4 [ 0.000000@0] no prop version_code [ 0.000000@0] bootconsole [earlycon0] enabled [ 0.000000@0] fdt Reserved memory table: [ 0.000000@0] linux,di: 0x000000007d300000 - 0x000000007f100000 (30 MiB) [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007d300000, size 30 MiB [ 0.000000@0] linux,ion-dev: 0x0000000079300000 - 0x000000007d300000 (64 MiB) [ 0.000000@0] linux,vdin1_cma: 0x0000000078000000 - 0x0000000079000000 (16 MiB) [ 0.000000@0] cma: Reserved 16 MiB at 78000000, total cma pages:4096 [ 0.000000@0] linux,ppmgr: 0x0000000079300000 - 0x0000000079300000 (0 MiB) [ 0.000000@0] linux,codec_mm_cma: 0x0000000067800000 - 0x0000000073800000 (192 MiB) [ 0.000000@0] cma: Reserved 192 MiB at 67800000, total cma pages:53248 [ 0.000000@0] linux,picdec: 0x0000000079300000 - 0x0000000079300000 (0 MiB) [ 0.000000@0] Reserved memory: incorrect alignment of CMA region [ 0.000000@0] linux,codec_mm_reserved: 0x0000000073f00000 - 0x0000000078000000 (65 MiB) [ 0.000000@0] fdt Reserved memory total: 370 MiB [ 0.000000@0] cma: Reserved 8 MiB at 67000000, total cma pages:55296 [ 0.000000@0] On node 0 totalpages: 519424 [ 0.000000@0] Normal zone: 11176 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 519424 pages, LIFO batch:31 [ 0.000000@0] psci: probing function IDs from device-tree [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07926c000 s17536 r8192 d23424 u49152 [ 0.000000@0] pcpu-alloc: s17536 r8192 d23424 u49152 alloc=12*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508248 [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=8 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=c4:2f:ad:07:34:28 androidboot.mac=c4:2f:ad:07:34:28 bootfromext console=tty0 systemd.show_status=auto noswap ssh [ 0.000000@0] logo: osd1 [ 0.000000@0] logo: loaded [ 0.000000@0] logo: 0x3d800000 [ 0.000000@0] logo: 1080p60hz [ 0.000000@0] vout_serve: 1080p60hz [ 0.000000@0] vout_serve: en: 1 [ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz [ 0.000000@0] vout_serve: 1080p60hz [ 0.000000@0] vout_serve: enable: 1 [ 0.000000@0] logo: get hdmimode: 1080p60hz [ 0.000000@0] logo: get cvbsmode: 576cvbs [ 0.000000@0] tv_vout: cvbs performance line = 0 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000@0] Memory: 1624680K/2077696K available (6977K kernel code, 815K rwdata, 2624K rodata, 909K init, 2903K bss, 453016K reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042bbd800 ( 43 MB) [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07f100000 ( 2033 MB) [ 0.000000@0] .init : 0xffffffc0019e2000 - 0xffffffc001ac5480 ( 910 kB) [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc0019e1734 ( 9606 kB) [ 0.000000@0] .data : 0xffffffc001ac6000 - 0xffffffc001b91eb0 ( 816 kB) [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x019e0fff] [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000@0] arch_multi_cluster:1 [ 0.000000@0] Hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.008246@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994 [ 0.016787@0] Console: colour dummy device 80x25 [ 0.021087@0] console [tty0] enabled [ 0.024672@0] bootconsole [earlycon0] disabled [ 0.030940@0] allocated 8388608 bytes of page_cgroup [ 0.030952@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.030976@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.030994@0] pid_max: default: 32768 minimum: 301 [ 0.031120@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.031133@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.036539@0] Initializing cgroup subsys memory [ 0.036576@0] Initializing cgroup subsys devices [ 0.036587@0] Initializing cgroup subsys freezer [ 0.036597@0] Initializing cgroup subsys blkio [ 0.036606@0] Initializing cgroup subsys net_prio [ 0.036656@0] ftrace: allocating 23632 entries in 93 pages [ 0.065780@0] /cpus/cpu@0: Missing clock-frequency property [ 0.065805@0] /cpus/cpu@1: Missing clock-frequency property [ 0.065816@0] /cpus/cpu@2: Missing clock-frequency property [ 0.065828@0] /cpus/cpu@3: Missing clock-frequency property [ 0.065840@0] /cpus/cpu@100: Missing clock-frequency property [ 0.065853@0] /cpus/cpu@101: Missing clock-frequency property [ 0.065866@0] /cpus/cpu@102: Missing clock-frequency property [ 0.065880@0] /cpus/cpu@103: Missing clock-frequency property [ 0.067435@0] Meson chip version = RevA (22:A - 82:0) [ 0.067950@1] CPU1: Booted secondary processor [ 0.068355@2] CPU2: Booted secondary processor [ 0.068731@3] CPU3: Booted secondary processor [ 0.069100@4] CPU4: Booted secondary processor [ 0.069489@5] CPU5: Booted secondary processor [ 0.069853@6] CPU6: Booted secondary processor [ 0.070221@7] CPU7: Booted secondary processor [ 0.070305@0] Brought up 8 CPUs [ 0.070367@0] SMP: Total of 8 processors activated. [ 0.070883@0] devtmpfs: initialized [ 0.077383@2] sched: registering cpufreq notifiers for scale-invariant loads [ 0.077425@2] instabooting: 0 [ 0.085864@0] cma: cma_init_reserved_areas, use_cma_first:1 [ 0.085948@0] pinctrl core: initialized pinctrl subsystem [ 0.086519@2] regulator-dummy: no parameters [ 0.087223@3] NET: Registered protocol family 16 [ 0.088577@0] ramoops: using module parameters [ 0.089102@2] pstore: Registered ramoops as persistent store backend [ 0.089122@2] ramoops: attached 0x100000@0x7300000, ecc: 0/0 [ 0.089921@2] aml_vdac_init: module init [ 0.090072@0] register canvas platform driver [ 0.090146@2] register rdma platform driver [ 0.091319@2] vdso: 2 pages (1 code, 1 data) at base ffffffc001ad0000 [ 0.091709@2] DMA: preallocated 256 KiB pool for atomic allocations [ 0.092629@2] software IO TLB [mem 0x62800000-0x62c00000] (4MB) mapped at [ffffffc062800000-ffffffc062bfffff] [ 0.093041@3] aml_i2c version: 20140813 [ 0.093259@2] i2c-core: driver [pmu4] using legacy resume method [ 0.093332@3] codec_mm:codec_mm_module_init [ 0.093696@2] gxbb_mpll_clk: register mpll_clk_out0 success done [ 0.093710@2] gxbb_mpll_clk: register mpll_clk_out1 success done [ 0.093722@2] gxbb_mpll_clk: register mpll_clk_out2 success done [ 0.093926@2] clk_sys: register PLL sys_pll success done [ 0.093944@2] gxl_clk: [ xtal ] ->clockrate: 24000000Hz [ 0.093954@2] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz [ 0.093964@2] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz [ 0.093973@2] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz [ 0.093982@2] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz [ 0.093991@2] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz [ 0.094000@2] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz [ 0.094009@2] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz [ 0.094018@2] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz [ 0.094050@2] gxl_clk: clock initialization complete [ 0.094242@2] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk_reg2=ffffff800003e764 [ 0.096556@3] aml_iomap: amlogic iomap probe done [ 0.097078@2] pinmux-gxl c1109880.pinmux: Init pinux probe! [ 0.097931@2] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver [ 0.098382@3] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0) [ 0.098416@3] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0) [ 0.098578@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0) [ 0.098602@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0) [ 0.100877@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000 [ 0.100891@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000 [ 0.100901@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000 [ 0.100910@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000 [ 0.100920@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000 [ 0.100929@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000 [ 0.100939@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000 [ 0.100948@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000 [ 0.103111@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000 [ 0.103122@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000 [ 0.103132@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000 [ 0.103141@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000 [ 0.103151@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000 [ 0.103160@0] dvfs [scpi_dvfs_get_opps] - new count 5, max_freq 1000000000 [ 0.105013@3] codec_mm has 2 memory regions [ 0.105063@3] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok [ 0.105082@3] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok [ 0.105175@0] codec_mm has 2 memory regions [ 0.105195@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok [ 0.105212@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok [ 0.107108@2] vpu: driver version: v03 [ 0.107157@2] vpu: load vpu_clk: 666667000Hz(7) [ 0.107246@3] vpu: vpu_probe OK [ 0.108601@0] tv_vout: tvout_probe [ 0.108624@0] tv_vout: chrdev devno 265289728 for disp [ 0.108633@0] vout_notify: vout_register_server [ 0.108642@0] tv_vout: register tv module server ok [ 0.108897@3] tv_vout: create cdev tv [ 0.108912@3] tv_vout: tvout_probe OK [ 0.109422@2] canvas_probe reg=00000000c8838000,size=400 [ 0.109455@2] canvas maped reg_base =ffffff800009a000 [ 0.113132@2] rdma_probe [ 0.320721@0] bio: create slab at 0 [ 0.321676@0] SCSI subsystem initialized [ 0.322192@2] usbcore: registered new interface driver usbfs [ 0.322279@2] usbcore: registered new interface driver hub [ 0.322399@3] usbcore: registered new device driver usb [ 0.323123@2] i2c-gpio i2c_gpio.40: using pins 172 (SDA) and 173 (SCL) [ 0.323310@2] pps_core: LinuxPPS API ver. 1 registered [ 0.323322@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.323391@2] PTP clock support registered [ 0.323878@2] hdmitx: system: amhdmitx_init [ 0.323890@2] hdmitx: system: Ver: 2014May6 [ 0.324080@2] hdmitx: system: amhdmitx_probe [ 0.324397@3] hdmitx: system: not find match init-data [ 0.324414@3] hdmitx hpd irq = 89 [ 0.324961@2] hdmitx20: Mapped PHY: 0xc0800000 [ 0.324981@2] hdmitx20: Mapped PHY: 0xc1104400 [ 0.325006@2] hdmitx20: Mapped PHY: 0xc8100000 [ 0.325016@2] hdmitx20: Mapped PHY: 0xc8834000 [ 0.325025@2] hdmitx20: Mapped PHY: 0xc883a000 [ 0.325034@2] hdmitx20: Mapped PHY: 0xc883c000 [ 0.325046@2] hdmitx20: Mapped PHY: 0xd0100000 [ 0.325056@2] hdmitx20: Mapped PHY: 0xda83a000 [ 0.325072@2] hdmitx: alread display in uboot 0x10 [ 0.325114@2] avmute set to 1 [ 0.325539@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=16 [ 0.325559@3] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 0.325577@3] tv_vout: already display in uboot [ 0.325585@3] vout_serve: vinfo mode is: 1080p60hz [ 0.325594@3] vout_serve: init mode 1080p60hz [ 0.325850@3] vout_serve: create_vout_fops OK [ 0.325864@3] vout_serve: create vout attribute OK [ 0.325871@3] vout_serve: meson_vout_probe OK [ 0.326061@3] logo: logo_init [ 0.326309@3] osd_rdma: osd_rdma_init: rdma_table p=0x67041000,op=0x67041000 , v=0xffffff800009e000 [ 0.326342@3] rdma_register, rdma_table_addr ffffff80000a9000 rdma_table_addr_phy 67042000 reg_buf ffffffc000247000 [ 0.326357@3] rdma_register success, handle 1 table_size 4096 [ 0.326366@3] osd_rdma: osd_rdma_init:osd reset rdma handle = 1. [ 0.326389@3] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 67043000 reg_buf ffffffc000246000 [ 0.326402@3] rdma_register success, handle 2 table_size 4096 [ 0.326411@3] osd_rdma: osd_rdma_init:osd rdma handle = 2. [ 0.326809@0] Advanced Linux Sound Architecture Driver Initialized. [ 0.328834@3] Switched to clocksource arch_sys_counter [ 0.332158@0] hdmitx: system: irq 80000002 [ 0.338180@3] FS-Cache: Loaded [ 0.346870@0] NET: Registered protocol family 2 [ 0.347311@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.347433@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.347666@0] TCP: Hash tables configured (established 16384 bind 16384) [ 0.347738@0] TCP: reno registered [ 0.347754@0] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.347802@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.348032@0] NET: Registered protocol family 1 [ 0.348557@3] pwm: probe ok [ 0.348851@3] wifi: power_on_pin_OD = 0; [ 0.348871@3] aml_wifi wifi.35: [wifi_dev_probe] no power_on_pin2 [ 0.348907@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm phandle val=31;pwm-channel1=4;pwm-channel2=12 [ 0.348923@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541 [ 0.348936@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518 [ 0.348948@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270 [ 0.348961@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259 [ 0.348974@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[2] = 6 [ 0.348986@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[2] = 9 [ 0.348998@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] wifi pwm dt ok [ 0.349024@3] aml_wifi wifi.35: [pwm_double_channel_conf] wifi pwm conf ok [ 0.349076@3] aml_wifi wifi.35: [wifi_dev_probe] dhd_static_buf setup [ 0.349151@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated [ 0.349165@3] aml_wifi wifi.35: [wifi_dev_probe] interrupt_pin=241 [ 0.349176@3] aml_wifi wifi.35: [wifi_dev_probe] irq_num=100, irq_trigger_type=1 [ 0.349189@3] aml_wifi wifi.35: [wifi_dev_probe] power_on_pin=240 [ 0.349200@3] aml_wifi wifi.35: [wifi_dev_probe] clock_32k_pin=0 [ 0.349492@1] aml_wifi wifi.35: [wifi_setup_dt] wifi_setup_dt [ 0.349535@1] aml_wifi wifi.35: [wifi_setup_dt] interrupt_pin(241) [ 0.349554@1] aml_wifi wifi.35: [wifi_setup_dt] power_on_pin(240) [ 0.349746@3] Unpacking initramfs... [ 0.359782@3] Freeing initrd memory: 3896K (ffffffc073ae8000 - ffffffc073eb6000) [ 0.362887@1] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.372112@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.372614@1] msgmni has been set to 3612 [ 0.373684@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.373790@1] io scheduler noop registered (default) [ 0.373801@1] io scheduler deadline registered [ 0.373829@1] io scheduler cfq registered [ 0.374675@3] meson-rng c8834000.rng: hwrng registered [ 0.378195@0] loop: module loaded [ 0.380066@1] tun: Universal TUN/TAP device driver, 1.6 [ 0.380087@1] tun: (C) 1999-2004 Max Krasnyansky [ 0.504496@0] libphy: stmmac: probed [ 0.504520@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 0.504531@0] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 0.504966@3] PPP generic driver version 2.4.2 [ 0.505226@1] NET: Registered protocol family 24 [ 0.505349@3] usbcore: registered new interface driver smsc95xx [ 0.505694@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral [ 0.505819@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.505845@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver [ 0.506069@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.506358@1] usbcore: registered new interface driver usb-storage [ 0.506565@0] usbcore: registered new interface driver usbserial [ 0.506653@3] usbcore: registered new interface driver usbserial_generic [ 0.506741@3] usbserial: USB Serial support registered for generic [ 0.506822@0] usbcore: registered new interface driver pl2303 [ 0.506907@1] usbserial: USB Serial support registered for pl2303 [ 0.507431@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000fa000 [ 0.507664@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port [ 0.507732@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fc080 [ 0.508056@0] mousedev: PS/2 mouse device common for all mice [ 0.508280@3] i2c /dev entries driver [ 0.509104@3] cpu cpu0: bL_cpufreq_init: CPU 0 initialized [ 0.511341@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized [ 0.512604@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi [ 0.513269@0] ledtrig-cpu: registered to indicate activity on CPUs [ 0.513425@3] hidraw: raw HID events driver (C) Jiri Kosina [ 0.515506@3] usbcore: registered new interface driver usbhid [ 0.515526@3] usbhid: USB HID core driver [ 0.515699@0] ashmem: initialized [ 0.516075@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fe4c0 [ 0.516109@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart [ 0.516129@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 [ 0.648880@3] hdmitx: plugin [ 0.703574@3] EDID Parser: [ 0.703843@3] dump_dtd_info[1762] [ 0.703845@3] pixel_clock 8475 [ 0.703846@3] h_active 1360 [ 0.703847@3] h_blank 416 [ 0.703848@3] v_active 768 [ 0.703849@3] v_blank 30 [ 0.703850@3] h_sync_offset 72 [ 0.703851@3] h_sync 136 [ 0.703853@3] v_sync_offset 3 [ 0.703854@3] v_sync 5 [ 0.703855@3] dump_dtd_info[1762] [ 0.703856@3] pixel_clock 8014 [ 0.703857@3] h_active 1280 [ 0.703858@3] h_blank 384 [ 0.703859@3] v_active 768 [ 0.703860@3] v_blank 30 [ 0.703861@3] h_sync_offset 64 [ 0.703862@3] h_sync 128 [ 0.703863@3] v_sync_offset 3 [ 0.703864@3] v_sync 7 [ 0.703879@3] dump_dtd_info[1762] [ 0.703880@3] pixel_clock 7425 [ 0.703881@3] h_active 1280 [ 0.703882@3] h_blank 384 [ 0.703883@3] v_active 720 [ 0.703884@3] v_blank 28 [ 0.703885@3] h_sync_offset 64 [ 0.703886@3] h_sync 128 [ 0.703887@3] v_sync_offset 3 [ 0.703888@3] v_sync 5 [ 0.703890@3] hdmitx: edid: find IEEEOUT [ 0.703893@3] hdmitx: edid: check sum valid [ 0.703894@3] hdmitx: edid: check sum valid [ 0.703898@3] hdmitx: update RX hdr info 0 [ 0.703902@3] hdmitx: edid: check sum valid [ 0.703903@3] hdmitx: edid: check sum valid [ 0.703905@3] hdmitx: edid: blk0 raw data [ 0.703936@3] 00ffffffffffff001e6da875010101010811010380462778ead9b0a357499c25 [ 0.703936@3] 11494b810800010101010101454001016140010101011b2150a051001e304888 [ 0.703936@3] 3500bc882100001c4e1f008051001e3040803700bc8821000018000000fc004c [ 0.703936@3] 472054560a20202020202020000000fd00324b1c430f000a20202020202001ba [ 0.703936@3] [ 0.703936@3] [ 0.703937@3] hdmitx: edid: blk1 raw data [ 0.703968@3] 020323f15001071602031112130414852021221f10230907078301000065030c [ 0.703968@3] 001000011d008051d01c2040803500bc882100001e8c0ad08a20e02d10103e96 [ 0.703968@3] 00138e210000188c0aa01451f01600267c4300c48e21000098011d8018711c16 [ 0.703968@3] 20582c2500c48e2100009e0000000000000000000000000000000000000000ab [ 0.703968@3] [ 0.703968@3] [ 0.703990@3] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 0.703996@3] hdmitx: video: get current mode: 1080p60hz [ 0.703997@3] hdmitx: update rx hdr info 0 [ 0.703999@3] hdmitx: update physcial size: 700 390 [ 0.704014@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 0.704019@3] hdmtix: set audio [ 0.704028@3] hdmitx tx_aud_src = 0 [ 0.704053@3] hdmitx: fs = 0, cd = 4, tmds_clk = 148500 [ 0.704054@3] hdmitx aud_n_para = 6144 [ 0.704071@3] hdmitx set channel status [ 2.395902@2] console [ttyS0] enabled [ 2.399946@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800010a4c0 [ 2.406597@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart [ 2.416433@1] meson-gpu-clkgen c883c000.gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff] [ 2.425855@1] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16 [ 2.433337@0] hdmitx: system: hdmitx_hdcp_init [ 2.438129@1] aml_vrtc rtc.34: rtc core: registered aml_vrtc as rtc0 [ 2.444021@0] secmon has 1 memory regions [ 2.447753@0] secmon: share in base: 0xffffff800011c000, share out base: 0xffffff800011e000 [ 2.456074@0] secmon secmon.4: assigned reserved memory node linux,secmon ok [ 2.463011@0] secmon: probe done [ 2.466772@2] storage: storage in base: 0xffffff8001800000 [ 2.471627@2] storage: storage out base: 0xffffff8001880000 [ 2.477130@2] storage: storage block base: 0xffffff8001900000 [ 2.482847@2] storage: probe done! [ 2.486788@0] aml_sd_emmc_probe: line 3594 [ 2.490291@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 2.500232@0] aml_sd_emmc_reg_init 1149 [ 2.503488@0] get property: ocr_avail, value:0x00200080 [ 2.509956@0] get property: f_min, value:300000 [ 2.516030@0] get property: f_max, value:100000000 [ 2.522437@0] get property: max_req_size, value:0x00020000 [ 2.528893@0] get property: pinname, str:emmc [ 2.534662@0] get property: card_type, value:1 [ 2.540391@0] get property: gpio_dat3, str: [ 2.545788@0] get property: hw_reset, str: [ 2.551260@0] emmc:pdata->caps = c0000d47 [ 2.555208@0] emmc:pdata->caps2 = 18060 [ 2.558991@0] emmc:pdata->pm_caps = 0 [ 2.562657@0] storage 1, boot 1 [ 2.565709@0] get_storage_dev return 1 [ 2.608842@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.609065@0] aml_sd_emmc_probe: line 3594 [ 2.613523@0] aml_sd_emmc_reg_init 1149 [ 2.617025@0] get property: ocr_avail, value:0x00200080 [ 2.623483@0] get property: f_min, value:400000 [ 2.629567@0] get property: f_max, value:100000000 [ 2.635867@0] get property: max_req_size, value:0x00020000 [ 2.642356@0] get property: irq_in, value:3 [ 2.648027@0] get property: irq_out, value:5 [ 2.653824@0] get property: gpio_cd, str: [ 2.659186@0] get property: pinname, str:sd [ 2.664762@0] get property: jtag_pin, str: [ 2.670276@0] get property: card_type, value:5 [ 2.675975@0] get property: card_in_delay, value:400 [ 2.681836@0] get property: gpio_dat3, str: [ 2.687269@0] sd:pdata->caps = 7 [ 2.690473@0] sd:pdata->caps2 = 0 [ 2.693653@0] sd:pdata->pm_caps = 0 [ 2.704734@3] emmc: BKOPS_EN bit is not set [ 2.712665@3] emmc: trying cali 0-th time(s) [ 2.719838@3] emmc: delay[0]= 5200 padding= 4, bidx=0 [ 2.719866@3] emmc: delay[1]= 5200 padding= 4, bidx=0 [ 2.724255@3] emmc: delay[2]= 4800 padding= 1, bidx=4 [ 2.729027@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.729056@2] aml_sd_emmc_probe: line 3594 [ 2.739132@3] emmc: delay[3]= 5400 padding= 3, bidx=0 [ 2.739399@2] aml_sd_emmc_reg_init 1149 [ 2.739458@2] get property: ocr_avail, value:0x00200080 [ 2.739461@2] get property: f_min, value:400000 [ 2.739464@2] get property: f_max, value:200000000 [ 2.739467@2] get property: max_req_size, value:0x00020000 [ 2.739474@2] get property: pinname, str:sdio [ 2.739478@2] get property: card_type, value:3 [ 2.739512@2] sdio:pdata->caps = 78107 [ 2.739514@2] sdio:pdata->caps2 = 0 [ 2.739518@2] sdio:pdata->pm_caps = 1 [ 2.778855@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.779178@1] ion_dev has 1 memory regions [ 2.798926@1] fb: osd_init_module [ 2.799043@1] fb: viu vsync irq: 35 [ 2.799050@1] fb: failed to init reserved memory [ 2.799065@1] fb: osd_probe vinfo:ffffffc001b2d028 [ 2.799079@1] fb: init fbdev bpp is:32 [ 2.825194@3] emmc: delay[4]= 5400 padding= 3, bidx=0 [ 2.830181@3] emmc: delay[5]= 5400 padding= 3, bidx=0 [ 2.830253@1] fb: set osd0 reverse as NONE [ 2.837832@0] fb: osd probe OK [ 2.838039@0] ge2d: ge2d_init_module [ 2.838050@0] ge2d: ge2d_dev major:242 [ 2.838456@0] ge2d: ge2d clock is 400 MHZ [ 2.838461@0] ge2d: ge2d: pdev=ffffffc0103c1a00, irq=182, rstc=0xffffffc000318440, clk=ffffffc00021a400 [ 2.838515@0] ge2d: mapped phy: 0xd0160000 [ 2.838522@0] ge2d: ge2d start monitor [ 2.838590@1] ge2d: ge2d workqueue monitor start [ 2.838942@1] codec:Amlogic A/V streaming port init [ 2.840807@0] codec:get gate demux control ok ffffffc0003182c0 [ 2.840812@0] codec:get gate parser_top control ok ffffffc000318600 [ 2.840824@0] codec:get gate vpu_intr control ok ffffffc000329040 [ 2.840831@0] codec:get gate vdec control ok ffffffc0003290c0 [ 2.841628@0] codec:[tsync_pcr_init]init success. [ 2.841770@0] codec:amvideocap_probe,amvideocap [ 2.841774@0] codec:use cma buf. [ 2.844264@0] codec:vdec_request_irq ffffffc00156b2b0, vsync [ 2.844505@1] codec:create_ge2d_work_queue video task ok [ 2.845111@0] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_addr_phy 67050000 reg_buf ffffffc062330000 [ 2.845115@0] rdma_register success, handle 3 table_size 32768 [ 2.845117@0] video_rdma:rdma_init video rdma handle = 3. [ 2.845124@0] codec:used fix clk for vdec clk source! [ 2.845129@0] codec:register clk_set_setting cpu[34] [ 2.845869@0] DI: di_module_init ok. [ 2.845875@0] DI: di_module_init: major 238 [ 2.846107@1] DI: di_probe [ 2.846293@0] deinterlace has 1 memory regions [ 2.846336@0] DI: di reveser memory 0x7d300000, size 30MB. [ 2.846344@0] deinterlace deinterlace.26: assigned reserved memory node linux,di ok [ 2.846348@0] DI-di_probe: get flag_cma error. [ 2.846375@0] di_irq:78,timerc_irq:38 [ 2.846527@0] rdma_register, rdma_table_addr ffffff8000179000 rdma_table_addr_phy 6704a000 reg_buf ffffffc062390000 [ 2.846530@0] rdma_register success, handle 4 table_size 8192 [ 2.846532@0] DI: di_probe allocate rdma channel 4. [ 2.846536@0] DI: DI hw version 2. [ 2.846548@0] 0x000000db:Y=db,U=0,V=0 [ 2.846550@0] 0x000000dc:Y=dc,U=0,V=0 [ 2.846552@0] 0x000000dd:Y=dd,U=0,V=0 [ 2.846554@0] 0x000000de:Y=de,U=0,V=0 [ 2.846556@0] 0x000000df:Y=df,U=0,V=0 [ 2.846558@0] 0x000000e0:Y=e0,U=0,V=0 [ 2.846560@0] 0x000000e1:Y=e1,U=0,V=0 [ 2.846562@0] 0x000000e2:Y=e2,U=0,V=0 [ 2.846564@0] 0x000000e3:Y=e3,U=0,V=0 [ 2.846566@0] 0x000000f0:Y=f0,U=0,V=0 [ 2.846571@0] 0x000000f1:Y=f1,U=0,V=0 [ 2.846573@0] 0x000000f2:Y=f2,U=0,V=0 [ 2.846575@0] 0x000000f3:Y=f3,U=0,V=0 [ 2.846577@0] 0x000000f4:Y=f4,U=0,V=0 [ 2.846579@0] 0x000000f5:Y=f5,U=0,V=0 [ 2.846581@0] 0x000000f6:Y=f6,U=0,V=0 [ 2.846585@0] 0x000000f7:Y=f7,U=0,V=0 [ 2.846587@0] 0x000000f8:Y=f8,U=0,V=0 [ 2.846589@0] 0x000000f9:Y=f9,U=0,V=0 [ 2.846591@0] 0x000000fa:Y=fa,U=0,V=0 [ 2.846593@0] 0x000000fb:Y=fb,U=0,V=0 [ 2.846595@0] 0x000000fc:Y=fc,U=0,V=0 [ 2.847094@1] efusekeynum: 4 [ 2.847105@1] efusekeyname: mac offset: 0 size: 6 [ 2.847111@1] efusekeyname: mac_bt offset: 6 size: 6 [ 2.847118@1] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.847124@1] efusekeyname: usid offset: 18 size: 16 [ 2.847451@1] efuse efuse.10: probe OK! [ 2.847776@0] key unify config unifykey-num is 14 [ 2.847831@0] key unify fact unifykey-num is 14 [ 2.847836@0] aml_unifykeys_probe:1280=============unifykey_devno:ec00000 [ 2.848128@0] 6unifykey: device unifykeys created ok [ 2.848239@1] 6aml_unifykeys_init done! [ 2.848242@1] PPMGRDRV: warn: ppmgr module init func called [ 2.848354@1] PPMGRDRV: err: ppmgr_driver_probe called [ 2.848357@1] ppmgr has 1 memory regions [ 2.848394@1] PPMGRDRV: info: ppmgr_dev major:235 [ 2.848685@1] PPMGRDRV: info: ppmgr_probe done [ 3.129159@4] [aml_is_card_insert] card IN [ 3.177088@3] emmc: delay[6]= 5400 padding= 3, bidx=0 [ 3.182076@3] emmc: delay[7]= 5400 padding= 3, bidx=0 [ 3.187072@3] emmc: calibration result @ 0: max(5400), min(4800) [ 3.193029@3] emmc: line_delay =0x311, max_cal_result =5400 [ 3.198542@3] emmc: base_index_max 0, base_index_min 0 [ 3.203752@0] amlogic rfkill init [ 3.207092@0] enter bt_probe of_node [ 3.210490@0] not get gpio_en [ 3.213378@0] power on valid level is high [ 3.217259@0] bt: power_on_pin_OD = 0; [ 3.230833@6] normal card in [ 3.231085@6] emmc: clk 100000000 SDR mode tuning start [ 3.237141@1] emmc: rx_tuning_result[1] = 10 [ 3.237932@1] emmc: rx_tuning_result[2] = 10 [ 3.242140@1] emmc: rx_tuning_result[3] = 10 [ 3.246366@1] emmc: rx_tuning_result[4] = 10 [ 3.250657@1] emmc: rx_tuning_result[5] = 10 [ 3.254869@1] emmc: rx_tuning_result[6] = 10 [ 3.259111@1] emmc: rx_tuning_result[7] = 10 [ 3.263305@1] emmc: rx_tuning_result[8] = 10 [ 3.267198@1] emmc: best_win_start =1, best_win_size =8 [ 3.272295@1] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x52000 [ 3.279631@1] emmc: gclock =0x100024a, gdelay=0x311, gadjust=0x52000 [ 3.287107@1] emmc: support driver strength type 1 [ 3.291159@1] emmc: try set sd/emmc to DDR mode [ 3.295145@1] emmc: try set sd/emmc to DDR mode [ 3.300267@1] emmc: new HS400 MMC card at address 0001 [ 3.304717@1] emmc: clock 100000000, 8-bit-bus-width [ 3.304717@1] [ 3.310236@1] mmcblk0: emmc:0001 Biwin 14.4 GiB [ 3.314699@1] mmcblk0boot0: emmc:0001 Biwin partition 1 4.00 MiB [ 3.320753@1] mmcblk0boot1: emmc:0001 Biwin partition 2 4.00 MiB [ 3.326774@1] mmcblk0rpmb: emmc:0001 Biwin partition 3 4.00 MiB [ 3.336901@1] mmcblk0: unknown partition table [ 3.337936@3] [mmc_read_partition_tbl] mmc read partition OK! [ 3.342760@3] add_emmc_partition [ 3.346219@0] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 [ 3.354633@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 [ 3.362862@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000 [ 3.371210@0] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000 [ 3.379588@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000 [ 3.387934@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000 [ 3.396334@0] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000 [ 3.404733@3] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000 [ 3.413032@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000 [ 3.421431@0] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000 [ 3.429806@3] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000 [ 3.438119@3] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000 [ 3.446504@0] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000 [ 3.455100@3] [mmcblk0p14] data offset 0x000097c00000, size 0x000302400000 [ 3.463109@3] card key: card_blk_probe. [ 3.466870@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220 [ 3.473687@3] emmc key: emmc_key_init:552 ok. [ 3.477994@3] amlmmc_dtb_init: register dtb chardev [ 3.489702@3] calc c6a3327d, store 736f6800 [ 3.489737@3] cpy 1 is not valid [ 3.494772@3] calc 4cb4914e, store b9403a60 [ 3.495751@3] cpy 0 is not valid [ 3.498960@3] total valid 0 [ 3.502136@3] amlmmc_dtb_init: register dtb chardev OK [ 3.506770@3] Exit aml_emmc_partition_ops OK. [ 3.514074@3] mmcblk0boot1: unknown partition table [ 3.518814@0] mmcblk0boot0: unknown partition table [ 3.521351@3] clear_emmc_wait_flag [ 3.605275@2] sd: new high speed SDHC card at address aaaa [ 3.605309@2] sd: clock 50000000, 4-bit-bus-width [ 3.605309@2] [ 3.610372@2] mmcblk1: sd:aaaa SL16G 14.8 GiB [ 3.619178@2] mmcblk1: p1 p2 [ 3.631062@5] [aml_is_card_insert] card IN [ 3.639052@1] audio_dsp: [dsp]register dsp to char divece(257) [ 3.640080@1] amaudio: amaudio: driver amaudio succuess! [ 3.645234@3] [RX]-hdmirx: hdmirx_init. [ 3.648303@3] ESM HLD: Initializing... [ 3.652062@3] ESM HLD: Registering device range 'esm_rx'... [ 3.657556@3] ESM HLD: Device range 'esm_rx' has been registered. [ 3.663598@3] ESM HLD: Creating class /sys/class/elliptic_rx... [ 3.669839@1] ESM HLD: The class /sys/class/elliptic_rx has been created. [ 3.676167@1] ESM HLD: Creating device 'esm_rx'... [ 3.681548@1] ESM HLD: Device 'esm_rx' has been created. [ 3.686171@1] ESM HLD: Done initializing the HLD driver. [ 3.691659@1] module init [ 3.694410@1] [ 3.694410@1] VECM probe start [ 3.700027@2] dolby_vision_init_receiver(dvel) [ 3.703169@2] dolby_vision_init_receiver: dvel [ 3.707560@2] aml_vecm_probe: ok [ 3.713359@2] saradc c1108680.saradc: initialized by BL30 [ 3.716116@2] saradc c1108680.saradc: calibration start: [ 3.721577@2] saradc c1108680.saradc: nominal=0, value=6 [ 3.726679@2] saradc c1108680.saradc: nominal=256, value=249 [ 3.732317@2] saradc c1108680.saradc: nominal=512, value=495 [ 3.737891@2] saradc c1108680.saradc: nominal=768, value=743 [ 3.743520@2] saradc c1108680.saradc: nominal=1023, value=988 [ 3.749188@2] saradc c1108680.saradc: calibration end: coef=4245 [ 3.755908@3] remote: Driver init [ 3.758470@3] remote: platform_data g_remote_ao_offset=580 [ 3.763808@3] remote: platform_data irq =228 [ 3.768047@3] remote: set drvdata completed [ 3.772267@3] remote: device_create_file completed [ 3.777640@3] input: aml_keypad as /devices/meson-remote.12/input/input0 [ 3.784371@2] remote: input_register_device completed [ 3.789122@2] remote: set_remote_mode[78] [ 3.792989@2] remote: remote config major:231 [ 3.797730@3] remote: physical address:0x36e000 [ 3.802465@2] gpio-key gpio_keypad.50: gpio_key: 0 name(power) pin() [ 3.808128@2] gpio-key gpio_keypad.50: amlogic_gpio_name_map_num pin 0!:: [ 3.814944@2] gpio-key gpio_keypad.50: gpio_key: 0 power(147) [ 3.820606@2] gpio-key gpio_keypad.50: start setup_timer [ 3.825808@2] gpio-key gpio_keypad.50: power key(116) registed. [ 3.832085@3] input: gpio_keypad as /devices/gpio_keypad.50/input/input1 [ 3.838617@3] gpio-key gpio_keypad.50: gpio keypad register input device completed. [ 3.845989@3] input input1: gpio keypad major:230 [ 3.851250@3] cpuinfo: probe done [ 3.855253@3] input: cec_input as /devices/virtual/input/input2 [ 3.860319@2] cectx aocec: aml_cec_probe(): no hdmirx reg resource [ 3.865828@2] cectx aocec: aml_cec_probe(): no hhi reg resource [ 3.871888@2] cectx aocec: aml_cec_probe(): can't find hdmirx [ 3.878527@2] cec: wake up flag:0 [ 3.883122@2] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe [ 3.890314@3] aml-i2s-dai I2S.42: I2S Mic is in platform! [ 3.893204@2] aml_pcm_dai: pcm mode detection =1 [ 3.918902@2] input input1: key 116 up [ 4.110307@2] aml_snd_card: headphone detection disable=1 [ 4.110531@2] aml_snd_card: no spk event delay time set [ 4.121152@2] aml_snd_m8_card aml_m8_snd.49: T9015-audio-hifi <-> I2S.42 mapping ok [ 4.126907@2] aml_snd_m8_card aml_m8_snd.49: dit-hifi <-> SPDIF.43 mapping ok [ 4.131057@2] aml_pcm: enter aml_pcm_new dai->name: PCM.44 dai->id: 0 [ 4.138059@2] aml_snd_m8_card aml_m8_snd.49: pcm2bt-pcm <-> PCM.44 mapping ok [ 4.144069@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTL [ 4.151443@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTL -> direct -> Ext Spk [ 4.160254@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTR [ 4.167816@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTR -> direct -> Ext Spk [ 4.180511@0] TCP: cubic registered [ 4.183856@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =0 [ 4.192607@0] NET: Registered protocol family 10 [ 4.196839@0] NET: Registered protocol family 17 [ 4.200192@0] Key type dns_resolver registered [ 4.206716@0] Registering SWP/SWPB emulation handler [ 4.212248@0] regulator-dummy: disabling [ 4.918678@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.919342@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.929792@1] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000 [ 4.933481@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.939659@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.946888@1] usb usb1: Product: xHCI Host Controller [ 4.951870@1] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd [ 4.957463@1] usb usb1: SerialNumber: xhci-hcd.0.auto [ 4.963590@1] hub 1-0:1.0: USB hub found [ 4.966392@1] hub 1-0:1.0: 3 ports detected [ 4.970917@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.976104@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.984085@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.990780@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.998087@1] usb usb2: Product: xHCI Host Controller [ 5.003102@1] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd [ 5.008695@1] usb usb2: SerialNumber: xhci-hcd.0.auto [ 5.014672@1] hub 2-0:1.0: USB hub found [ 5.017614@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 5.025764@4] console [netcon0] enabled [ 5.028613@4] netconsole: network logging started [ 5.033366@4] aml_vrtc rtc.34: setting system clock to 2015-01-01 00:00:08 UTC (1420070408) [ 5.043644@4] gxbb_pm: enter meson_pm_probe! [ 5.045822@4] gxbb_pm: meson_pm_probe done [ 5.051172@4] cpucore_cooling_register, max_cpu_core_num:4 [ 5.055556@4] cpucore_cooling_register, max_cpu_core_num:4 [ 5.076292@4] aml_istbt_dev_ready NULL [ 5.076387@4] ALSA device list: [ 5.077536@4] #0: AML-M8AUDIO [ 5.081518@4] Freeing unused kernel memory: 908K (ffffffc0019e2000 - ffffffc001ac5000) [ 5.137962@0] fb: use ion buffer for fb memory [ 5.138609@0] meson-fb meson-fb.16: create ion_client ffffffc000231900, handle=ffffffc061eb23c0 [ 5.138617@0] meson-fb meson-fb.16: ion memory(0): created fb at 0x0000000079300000, size 24 MiB [ 5.138622@0] fb: Frame buffer memory assigned at [ 5.138627@0] fb: 0, phy: 0x0000000079300000, vir:0xffffff8001cf5000, size=24900K [ 5.138627@0] [ 5.138634@0] fb: ---------------clear fb0 memory ffffff8001cf5000 [ 5.148904@7] fb: osd[0] canvas.idx =0x40 [ 5.148921@7] fb: osd[0] canvas.addr=0x79300000 [ 5.148930@7] fb: osd[0] canvas.width=7680 [ 5.148939@7] fb: osd[0] canvas.height=3240 [ 5.148947@7] fb: osd[0] frame.width=1920 [ 5.148956@7] fb: osd[0] frame.height=1080 [ 5.154621@7] fb: osd[0] canvas.idx =0x40 [ 5.154625@7] fb: osd[0] canvas.addr=0x79300000 [ 5.154629@7] fb: osd[0] canvas.width=7680 [ 5.154632@7] fb: osd[0] canvas.height=2160 [ 5.154635@7] fb: osd[0] frame.width=1920 [ 5.154638@7] fb: osd[0] frame.height=1080 [ 5.174870@1] fb: use ion buffer for fb memory [ 5.175009@1] meson-fb meson-fb.16: create ion_client ffffffc000231900, handle=ffffffc061c15e00 [ 5.175026@1] meson-fb meson-fb.16: ion memory(1): created fb at 0x000000007ab51000, size 1 MiB [ 5.175037@1] fb: Frame buffer memory assigned at [ 5.175048@1] fb: 1, phy: 0x000000007ab51000, vir:0xffffff8003547000, size=1024K [ 5.175048@1] [ 5.175063@1] fb: fb1 open, logo index:1 [ 5.204665@4] codec:free_alloced_keep_buffer (null). (null). (null) [ 5.204924@4] vfm_map_store:rm default [ 5.204924@4] [ 5.205052@4] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 5.205052@4] [ 5.205214@4] fb: osd[0] enable: 1 (platform_init) [ 5.221342@4] fb: osd[1] enable: 0 (platform_init) [ 5.289366@5] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.371234@1] Console: switching to colour frame buffer device 240x67 [ 5.429434@4] usb 1-1: New USB device found, idVendor=2013, idProduct=0258 [ 5.429447@4] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 5.429454@4] usb 1-1: Product: PCTV 461 [ 5.429461@4] usb 1-1: Manufacturer: PCTV [ 5.429467@4] usb 1-1: SerialNumber: 0011562894 [ 5.440897@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0 [ 5.541475@1] dwc_otg: Core Release: 3.10a [ 5.541521@1] dwc_otg: Setting default values for core params [ 5.541543@1] dwc_otg: curmode: 0, host_only: 0 [ 5.553878@1] dwc_otg: Using Buffer DMA mode [ 5.553886@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 5.553890@1] dwc_otg: Working on port type = SLAVE [ 5.553909@1] dwc_otg: Dedicated Tx FIFOs mode [ 7.206320@7] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 7.207027@7] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 7.257282@7] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 13.539649@0] random: nonblocking pool is initialized [ 14.368741@7] systemd[1]: System time before build time, advancing clock. [ 14.500766@4] systemd[1]: systemd 236 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 14.502082@4] systemd[1]: Detected architecture arm64. [ 14.502741@4] systemd[1]: Set hostname to . [ 14.641403@1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 14.641472@1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 14.721694@1] systemd[1]: System is tainted: var-run-bad [ 14.723091@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.724058@1] systemd[1]: Created slice System Slice. [ 14.726101@1] systemd[1]: Mounting POSIX Message Queue File System... [ 14.728395@1] systemd[1]: Mounting Kernel Debug File System... [ 14.729032@1] systemd[1]: Listening on udev Control Socket. [ 14.730769@1] systemd[1]: Created slice User and Session Slice. [ 14.730920@1] systemd[1]: Reached target Slices. [ 14.731382@1] systemd[1]: Listening on Journal Socket (/dev/log). [ 14.731761@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 14.731881@1] systemd[1]: Reached target Paths. [ 14.734305@1] systemd[1]: Starting Show Version... [ 14.737035@1] systemd[1]: Starting Debug Shell on /dev/ttyS0... [ 14.737547@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 14.737550@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 14.738270@1] systemd[1]: Listening on RPCbind Server Activation Socket. [ 14.738439@1] systemd[1]: Reached target RPC Port Mapper. [ 14.739098@1] systemd[1]: Listening on udev Kernel Socket. [ 14.739657@1] systemd[1]: Listening on Journal Socket. [ 14.742055@1] systemd[1]: Starting Samba Configuration... [ 14.744539@1] systemd[1]: Mounting Variable Directory... [ 14.761650@0] systemd[1]: Mounted Kernel Debug File System. [ 14.761861@0] systemd[1]: Mounted POSIX Message Queue File System. [ 14.761949@0] systemd[1]: Mounted Variable Directory. [ 14.763279@0] systemd[1]: Started Show Version. [ 14.765020@0] systemd[1]: Started Debug Shell on /dev/ttyS0. [ 14.766890@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 [ 14.767173@0] systemd[1]: Started Samba Configuration. [ 14.770249@0] systemd[1]: Starting Create kernel modules tree from overlays... [ 14.786505@3] kernel-overlays-setup: setup base modules [ 14.810501@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29 [ 14.848189@3] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware [ 14.848347@3] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays [ 14.849648@4] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.hauppauge.conf [ 14.907677@4] kernel-overlays-setup: added modules from /storage/.kodi/addons/driver.dvb.hauppauge/kernel-overlay/lib/modules/3.14.29 [ 14.907927@4] kernel-overlays-setup: running depmod [ 17.018188@4] kernel-overlays-setup: done [ 17.020331@0] systemd[1]: Started Create kernel modules tree from overlays. [ 17.021127@0] systemd[1]: Reached target Swap. [ 17.023091@0] systemd[1]: Mounting Temporary Directory (/tmp)... [ 17.025028@0] systemd[1]: Starting udev Coldplug all Devices... [ 17.037937@4] systemd[1]: Starting Load Kernel Modules... [ 17.044534@4] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 17.051283@4] systemd[1]: Starting Setup machine-id... [ 17.056349@1] media: Linux media interface: v0.10 [ 17.057537@4] systemd[1]: Starting Remount Root and Kernel File Systems... [ 17.060384@1] Linux video capture interface: v2.00 [ 17.060406@1] WARNING: You are using an experimental version of the media stack. [ 17.060406@1] As the driver is backported to an older kernel, it doesn't offer [ 17.060406@1] enough quality for its usage in production. [ 17.060406@1] Use it with care. [ 17.060406@1] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 17.060406@1] b32a2b42f76cdfd06b4b58a1ddf987ba329ae34e media: ddbridge: improve error handling logic on fe attach failures [ 17.060406@1] 6738d3bbab999d7d9d77a185d62bd146d9a257f2 media: drivers: media: remove duplicate includes [ 17.060406@1] 9ed785a926843ca5a954d3324082afa2b96f5824 media: platform: sti: Adopt SPDX identifier [ 17.063901@1] amlvid:err: amlvideo_init called [ 17.063911@1] amlvid:err: amlvideo_create_instance called [ 17.063920@1] amlvid:err: v4l2_dev.name=:amlvideo-000 [ 17.064458@1] amlvideo-000: V4L2 device registered as video10 [ 17.065763@1] Triggered SDIO WiFi power on and bus rescan. [ 17.065795@1] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240 [ 17.069170@4] systemd[1]: Mounted Temporary Directory (/tmp). [ 17.072667@4] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 17.075074@4] systemd[1]: Started Setup machine-id. [ 17.077178@4] systemd[1]: Started Remount Root and Kernel File Systems. [ 17.093111@4] systemd[1]: Starting Journal Service... [ 17.099327@4] systemd[1]: Starting Create Static Device Nodes in /dev... [ 17.124484@4] systemd[1]: Started Create Static Device Nodes in /dev. [ 17.125676@4] systemd[1]: Reached target Local File Systems (Pre). [ 17.125975@4] systemd[1]: Reached target Local File Systems. [ 17.131952@4] systemd[1]: Starting Rebuild Journal Catalog... [ 17.149409@4] systemd[1]: Started Rebuild Journal Catalog. [ 17.206336@4] systemd[1]: Started Journal Service. [ 17.233724@2] systemd-journald[1858]: Received request to flush runtime journal from PID 1 [ 17.368951@3] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240 [ 17.680729@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff [ 17.680752@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8 [ 17.680873@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52 [ 17.682046@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff [ 17.682051@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8 [ 17.682138@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52 [ 17.687117@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff [ 17.687127@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8 [ 17.687208@6] aml_sd_emmc_data_thread 2639 sdio: cmd:8 [ 17.717988@5] sdio: queuing unknown CIS tuple 0x01 (3 bytes) [ 17.732866@4] sdio: queuing unknown CIS tuple 0x1a (5 bytes) [ 17.739260@7] sdio: queuing unknown CIS tuple 0x1b (8 bytes) [ 17.740615@7] sdio: queuing unknown CIS tuple 0x14 (0 bytes) [ 17.744032@7] sdio: clk 200000000 SDR mode tuning start [ 17.745564@7] sdio: rx_tuning_result[0] = 10 [ 17.747122@7] sdio: rx_tuning_result[2] = 10 [ 17.748536@7] sdio: rx_tuning_result[3] = 10 [ 17.749890@5] sdio: rx_tuning_result[4] = 10 [ 17.749907@5] sdio: best_win_start =2, best_win_size =4 [ 17.749920@5] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x42000 [ 17.749938@5] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x42000 [ 17.751851@5] sdio: queuing unknown CIS tuple 0x80 (1 bytes) [ 17.751959@5] sdio: queuing unknown CIS tuple 0x81 (1 bytes) [ 17.752063@5] sdio: queuing unknown CIS tuple 0x82 (1 bytes) [ 17.752120@5] sdio: new ultra high speed SDR104 SDIO card at address 0001 [ 17.752132@6] sdio: clock 200000000, 4-bit-bus-width [ 17.752132@6] [ 17.752753@6] [sdio_reinit] finish [ 18.185607@2] Console: switching to colour dummy device 80x25 [ 18.212317@0] remote: cur_mode = 0 [ 18.212352@0] remote: set_remote_mode[78] [ 18.310440@6] em28xx 1-1:1.0: New device PCTV PCTV 461 @ 480 Mbps (2013:0258, interface 0, class 0) [ 18.310450@6] em28xx 1-1:1.0: DVB interface 0 found: isoc [ 18.310711@6] em28xx 1-1:1.0: chip ID is em28178 [ 18.332413@0] ftrace: Allocated trace_printk buffers [ 18.338743@0] mali d00c0000.t82x: Continuing without Mali regulator control [ 18.339004@0] mali d00c0000.t82x: set min pp to default 1 [ 18.339009@0] mali d00c0000.t82x: set min clk default to 0 [ 18.339214@0] mali d00c0000.t82x: dvfs table is 5 [ 18.339220@0] mali d00c0000.t82x: dvfs table addr ffffffc061cbaa18, ele size=48 [ 18.339223@0] mali d00c0000.t82x: max clk set 3 [ 18.339226@0] mali d00c0000.t82x: turbo clk set to 4 [ 18.339229@0] mali d00c0000.t82x: default clk set to 1 [ 18.339295@0] mali_plat=ffffffbffc132ba8 [ 18.397287@0] gpu cooling register okay with err=0 [ 18.402437@6] gpu core cooling register okay with err=0 [ 18.402651@6] gpu_power_main, 63 [ 18.404312@6] mali d00c0000.t82x: GPU identified as 0x0820 r1p0 status 0 [ 18.407585@6] mali d00c0000.t82x: Probed as mali0 [ 18.573012@7] cfg80211: Calling CRDA to update world regulatory domain [ 18.659076@2] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240 [ 18.696754@6] em28xx 1-1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xfc3c79a0 [ 18.696767@6] em28xx 1-1:1.0: EEPROM info: [ 18.696775@6] em28xx 1-1:1.0: microcode start address = 0x0004, boot configuration = 0x01 [ 18.703950@7] em28xx 1-1:1.0: AC97 audio (5 sample rates) [ 18.703964@7] em28xx 1-1:1.0: 500mA max power [ 18.703973@7] em28xx 1-1:1.0: Table at offset 0x27, strings=0x148c, 0x1874, 0x0a6a [ 18.704506@4] em28xx 1-1:1.0: Identified as PCTV DVB-S2 Stick (461e) (card=92) [ 18.704525@4] em28xx 1-1:1.0: dvb set to isoc mode. [ 18.705835@5] usbcore: registered new interface driver em28xx [ 18.718447@3] WARNING: You are using an experimental version of the media stack. [ 18.718447@3] As the driver is backported to an older kernel, it doesn't offer [ 18.718447@3] enough quality for its usage in production. [ 18.718447@3] Use it with care. [ 18.718447@3] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 18.718447@3] b32a2b42f76cdfd06b4b58a1ddf987ba329ae34e media: ddbridge: improve error handling logic on fe attach failures [ 18.718447@3] 6738d3bbab999d7d9d77a185d62bd146d9a257f2 media: drivers: media: remove duplicate includes [ 18.718447@3] 9ed785a926843ca5a954d3324082afa2b96f5824 media: platform: sti: Adopt SPDX identifier [ 18.720041@3] em28xx 1-1:1.0: Binding DVB extension [ 18.859146@2] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240 [ 19.059182@2] sdio_reset_comm(): [ 19.067516@7] em28xx: Registered (Em28xx dvb Extension) extension [ 19.075445@5] WARNING: You are using an experimental version of the media stack. [ 19.075445@5] As the driver is backported to an older kernel, it doesn't offer [ 19.075445@5] enough quality for its usage in production. [ 19.075445@5] Use it with care. [ 19.075445@5] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 19.075445@5] b32a2b42f76cdfd06b4b58a1ddf987ba329ae34e media: ddbridge: improve error handling logic on fe attach failures [ 19.075445@5] 6738d3bbab999d7d9d77a185d62bd146d9a257f2 media: drivers: media: remove duplicate includes [ 19.075445@5] 9ed785a926843ca5a954d3324082afa2b96f5824 media: platform: sti: Adopt SPDX identifier [ 19.076706@1] em28xx 1-1:1.0: Registering input extension [ 19.077412@0] 8021q: 802.1Q VLAN Support v1.8 [ 19.095950@1] sdio: queuing unknown CIS tuple 0x01 (3 bytes) [ 19.108297@1] sdio: queuing unknown CIS tuple 0x1a (5 bytes) [ 19.108869@1] Registered IR keymap rc-pinnacle-pctv-hd [ 19.109368@2] rc rc0: 1-1:1.0 IR as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/rc/rc0 [ 19.109720@2] input: 1-1:1.0 IR as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/rc/rc0/input4 [ 19.110136@2] em28xx 1-1:1.0: Input extension successfully initialized [ 19.110150@2] em28xx: Registered (Em28xx Input Extension) extension [ 19.114060@1] sdio: queuing unknown CIS tuple 0x1b (8 bytes) [ 19.118231@1] sdio: clk 200000000 SDR mode tuning start [ 19.118550@2] sdio: rx_tuning_result[0] = 10 [ 19.118914@2] sdio: rx_tuning_result[2] = 10 [ 19.119181@2] sdio: rx_tuning_result[3] = 10 [ 19.119437@2] sdio: rx_tuning_result[4] = 10 [ 19.119443@2] sdio: best_win_start =2, best_win_size =4 [ 19.119448@2] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x42000 [ 19.119456@2] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x42000 [ 19.119461@2] [sdio_reinit] finish [ 19.119470@2] wlan: loading driver v4.5.20.037 [ 19.119897@2] hifDeviceInserted: Dumping clocks (50000000,200000000) [ 19.119911@2] host caps:0x00078107, card_sd3_bus_mode:0x0000001C [ 19.120054@2] AR6000: Set async interrupt delay clock as 2. [ 19.121691@2] ath_hif_sdio: HIF (Atheros/multi-bss) [ 19.229560@4] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 19.236269@5] Board extended Data download address: 0x0 [ 19.253694@6] ol_download_firmware: Using 0x1234 for the remainder of init [ 19.297195@4] ol_transfer_bin_file: Loading setup file qsetup30.bin [ 19.297263@4] android_readwrite_file: file /lib/firmware/qsetup30.bin filp_open error [ 19.297270@4] ol_transfer_bin_file: Failed to get qsetup30.bin [ 20.371545@5] WDA_open-4688: WMA --> wmi_unified_attach - success [ 20.371586@5] ol_if_dfs_attach: called; ptr=ffffffc056101b54, radar_info=ffffffc062d43b88 [ 20.379059@6] MAILBOX SWAP Service is enabled! [ 20.379069@6] Reduced Tx Complete service is enabled! [ 20.380272@7] is_full_reorder_offloaded? 0 [ 20.389058@6] htt_tx_attach:htt_desc_start:0xffffffc055520000 htt_desc_end:0xffffffc05553c200 [ 20.398972@6] wma_pre_start-5056: WMA --> wmi_unified_connect_htc_service - success [ 20.399011@2] wma_mc_process_msg-21954: McThread: WNI_CFG_DNLD_REQ [ 20.418972@5] __wmi_control_rx: WMI UNIFIED SERVICE READY event [ 20.418985@5] wma_rx_service_ready_event-24786: WMA <-- WMI_SERVICE_READY_EVENTID [ 20.418998@5] wma_rx_service_ready_event-24901: WMA --> WMI_INIT_CMDID [ 20.428953@5] __wmi_control_rx: WMI UNIFIED READY event [ 20.428962@5] wma_rx_ready_event-24930: WMA <-- WMI_READY_EVENTID [ 20.429996@6] android_readwrite_file: file /lib/firmware/wlan/wlan_mac.bin filp_open error [ 20.430418@6] session id - 0, AddSta session - 0 [ 20.430465@5] wma_vdev_attach-5905: vdev_id 0, txrx_vdev_handle = ffffffc05f152400 [ 20.432571@6] session id - 1, AddSta session - 0 [ 20.432660@5] wma_vdev_attach-5905: vdev_id 1, txrx_vdev_handle = ffffffc05f152000 [ 20.432672@5] wma_vdev_attach-5971: P2P Device: creating self peer 86:5d:d7:bf:c9:90, vdev_id 1 [ 20.435352@6] Host SW:4.5.20.037, FW:0.0.0.60, HW:QCA9377_REV1_1 [ 20.435465@6] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32 [ 20.435655@6] wlan_logging_sock_activate_svc: Activated wlan_logging svc [ 20.435751@2] wlan: driver loaded [ 20.449157@5] target uses HTT version 3.32; host uses 3.23 [ 20.449170@5] *** Warning: host/target HTT versions are different, though compatible! [ 20.505359@1] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600 [ 20.505431@1] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 9600 [ 20.505460@1] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200 [ 20.558970@5] TXRX: ol_txrx_peer_find_add_id: Delete Peer ffffffc057390000 [ 20.709632@4] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.882995@5] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.887341@5] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.948887@4] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000 [ 25.076048@2] Bluetooth: Core ver 2.18 [ 25.076219@2] NET: Registered protocol family 31 [ 25.076226@2] Bluetooth: HCI device and connection manager initialized [ 25.076256@2] Bluetooth: HCI socket layer initialized [ 25.076267@2] Bluetooth: L2CAP socket layer initialized [ 25.076299@2] Bluetooth: SCO socket layer initialized [ 25.077649@2] Bluetooth: HCI UART driver ver 2.2 [ 25.077664@2] Bluetooth: HCI H4 protocol initialized [ 25.077669@2] Bluetooth: HCI BCSP protocol initialized [ 25.077673@2] Bluetooth: HCILL protocol initialized [ 25.077678@2] Bluetooth: HCIATH3K protocol initialized [ 25.077683@2] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 27.869112@5] libphy: stmmac-0:00 - Link is Up - 1000/Full [ 27.869139@5] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.096079@1] codec:vdec_create instance ffffff800407c000, total 1 [ 30.083184@6] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 30.083270@6] aml_spdif_dai: share the same clock [ 30.083283@6] aml_audio_hw: IEC958 PCM32 [ 30.083291@6] hdmitx: audio: aout notify rate 44100 [ 30.083296@6] hdmitx: audio: aout notify size 32 [ 30.083301@6] hdmitx: audio: aout notify format CT_PCM [ 30.083307@6] hdmtix: set audio [ 30.083324@6] hdmitx tx_aud_src = 0 [ 30.083356@6] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 30.083362@6] hdmitx aud_n_para = 6272 [ 30.083383@6] hdmitx set channel status [ 30.083450@6] hdmitx: audio: Audio Type: PCM [ 30.083455@6] hdmitx: audio: set audio param [ 30.083467@6] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source [ 30.083887@6] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 30.083897@6] aml_spdif_dai: share the same clock [ 30.083908@6] aml_audio_hw: IEC958 PCM32 [ 30.083915@6] hdmitx: audio: aout notify rate 44100 [ 30.083920@6] hdmitx: audio: aout notify size 32 [ 30.083924@6] hdmitx: audio: no update [ 30.083936@6] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source [ 30.084223@6] channel count should be 8, we got 2 aborting [ 30.087291@6] aml_snd_m8_card aml_m8_snd.49: I2S playback enable [ 30.087310@6] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable [ 30.257866@3] vout_serve: vmode set to null [ 30.257904@3] fb: current vmode=1080p60hz, cmd: 0x50000 [ 30.257912@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=59 [ 30.257918@3] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60 [ 30.257931@3] tv_vout: 3Invalid video output modes. [ 30.257935@3] tv_vout: new mode =null set ok [ 30.257938@3] vout_serve: vinfo mode is: null [ 30.257942@3] vout_serve: new mode null set ok [ 30.257954@3] hdmitx: edid: not find mapped vic [ 30.257960@3] hdmitx: video: get current mode: null [ 30.257965@3] hdmitx: update rx hdr info 0 [ 30.257968@3] hdmitx: update physcial size: 700 390 [ 30.257972@3] hdmitx: video: null not valid hdmi mode [ 30.257995@3] fb: current vmode=null, cmd: 0x10000 [ 30.271339@0] hdmitx: set frac_rate_policy as 0 [ 30.271380@0] vout_serve: vmode set to 1080p60hz [ 30.271403@0] vout_serve: disable HDMI PHY as soon as possible [ 30.271410@0] fb: current vmode=null, cmd: 0x50000 [ 30.271416@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16 [ 30.271422@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 30.271435@0] tv_vout: TV mode 1080p60hz selected. [ 30.271440@0] [ 30.271440@0] vdac_enable: on:0,module_sel:8 [ 30.271449@0] [ 30.271449@0] vdac_enable: on:0,module_sel:8 [ 30.271458@0] tv_vout: new mode =1080p60hz set ok [ 30.271461@0] vout_serve: vinfo mode is: 1080p60hz [ 30.271465@0] vout_serve: new mode 1080p60hz set ok [ 30.271483@0] hdmitx: video: get current mode: 1080p60hz [ 30.271487@0] hdmitx: update rx hdr info 0 [ 30.271490@0] hdmitx: update physcial size: 700 390 [ 30.271535@0] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 30.271541@0] hdmitx: rx no SCDC present indicator [ 30.273555@0] hdmitx: ddc rd8b error 0x54 0x01 [ 30.275569@0] hdmitx: ddc rd8b error 0x54 0x01 [ 30.275577@0] hdmirx version is 1.4 or below [ 30.275581@0] hdmitx div40: 0 [ 30.298871@7] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 30.298883@7] hdmitx: system: set pll [ 30.298888@7] hdmitx: system: param->VIC:16 [ 30.298894@7] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0 [ 30.298909@7] config HPLL = 2970000 [ 30.298933@7] HPLL: 0xc000027b [ 30.298937@7] config HPLL done [ 30.298948@7] set_hpll_od3_clk_div[437] div = 6 [ 30.298959@7] j = 4 vid_clk_div = 1 [ 30.298971@7] hdmitx: set enc for VIC: 16 [ 30.298994@7] hdmitx_set_hw[4947] set VIC = 16 [ 30.299216@0] hdmitx: system: irq 80000001 [ 30.299338@0] Start = 0x10000100 End = 0x100001ff [ 30.299349@0] [0x10000104]: 0x00000001 [ 30.299518@0] [0x10000180]: 0x000000ff [ 30.299523@0] [0x10000181]: 0x000000ff [ 30.299528@0] [0x10000182]: 0x00000003 [ 30.299532@0] [0x10000183]: 0x00000007 [ 30.299537@0] [0x10000184]: 0x0000003f [ 30.299542@0] [0x10000185]: 0x00000002 [ 30.299547@0] [0x10000187]: 0x000000ff [ 30.299552@0] [0x10000188]: 0x00000003 [ 30.310851@7] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 30.312871@7] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 30.314884@7] hdmitx: ddc rd8b error 0x54 0x21 [ 30.430890@2] hdmitx: system: PHY Setting Done [ 30.434916@2] Sink is HDMI device [ 30.434934@2] hdmitx: system: packet: can't get vendor data [ 30.434941@2] 1080p60hz 60 1 [ 30.434948@2] 1080p60hz 60 1 [ 30.434953@2] hdmtix: set audio [ 30.434964@2] hdmitx tx_aud_src = 0 [ 30.434991@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 30.434995@2] hdmitx aud_n_para = 6272 [ 30.435013@2] hdmitx set channel status [ 30.435072@2] hdmitx: audio: Audio Type: PCM [ 30.435080@2] fb: current vmode=1080p60hz, cmd: 0x10000 [ 30.482389@6] fb: osd[0] canvas.idx =0x40 [ 30.482392@6] fb: osd[0] canvas.addr=0x79300000 [ 30.482395@6] fb: osd[0] canvas.width=7680 [ 30.482397@6] fb: osd[0] canvas.height=3240 [ 30.482399@6] fb: osd[0] frame.width=1920 [ 30.482400@6] fb: osd[0] frame.height=1080 [ 30.876737@2] vout_serve: vmode set to null [ 30.876771@2] vout_serve: disable HDMI PHY as soon as possible [ 30.876778@2] fb: current vmode=1080p60hz, cmd: 0x50000 [ 30.876785@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=59 [ 30.876790@2] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60 [ 30.876802@2] tv_vout: 3Invalid video output modes. [ 30.876806@2] tv_vout: new mode =null set ok [ 30.876809@2] vout_serve: vinfo mode is: null [ 30.876813@2] vout_serve: new mode null set ok [ 30.876823@2] hdmitx: edid: not find mapped vic [ 30.876830@2] hdmitx: video: get current mode: null [ 30.876834@2] hdmitx: update rx hdr info 0 [ 30.876837@2] hdmitx: update physcial size: 700 390 [ 30.876841@2] hdmitx: video: null not valid hdmi mode [ 30.876865@2] fb: current vmode=null, cmd: 0x10000 [ 30.882115@0] hdmitx: set frac_rate_policy as 0 [ 30.882146@0] vout_serve: vmode set to 1080p60hz [ 30.882166@0] vout_serve: disable HDMI PHY as soon as possible [ 30.882172@0] fb: current vmode=null, cmd: 0x50000 [ 30.882178@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16 [ 30.882183@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 30.882196@0] tv_vout: TV mode 1080p60hz selected. [ 30.882201@0] [ 30.882201@0] vdac_enable: on:0,module_sel:8 [ 30.882211@0] [ 30.882211@0] vdac_enable: on:0,module_sel:8 [ 30.882219@0] tv_vout: new mode =1080p60hz set ok [ 30.882222@0] vout_serve: vinfo mode is: 1080p60hz [ 30.882226@0] vout_serve: new mode 1080p60hz set ok [ 30.882244@0] hdmitx: video: get current mode: 1080p60hz [ 30.882248@0] hdmitx: update rx hdr info 0 [ 30.882251@0] hdmitx: update physcial size: 700 390 [ 30.882295@0] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 30.882300@0] hdmitx: rx no SCDC present indicator [ 30.884312@0] hdmitx: ddc rd8b error 0x54 0x01 [ 30.886324@0] hdmitx: ddc rd8b error 0x54 0x01 [ 30.886331@0] hdmirx version is 1.4 or below [ 30.886335@0] hdmitx div40: 0 [ 30.908889@5] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 30.908903@5] hdmitx: system: set pll [ 30.908908@5] hdmitx: system: param->VIC:16 [ 30.908915@5] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0 [ 30.908929@5] config HPLL = 2970000 [ 30.908952@5] HPLL: 0xc000027b [ 30.908956@5] config HPLL done [ 30.908967@5] set_hpll_od3_clk_div[437] div = 6 [ 30.908978@5] j = 4 vid_clk_div = 1 [ 30.908990@5] hdmitx: set enc for VIC: 16 [ 30.909014@5] hdmitx_set_hw[4947] set VIC = 16 [ 30.909236@0] hdmitx: system: irq 80000001 [ 30.909259@0] Start = 0x10000100 End = 0x100001ff [ 30.909270@0] [0x10000104]: 0x00000001 [ 30.909439@0] [0x10000180]: 0x000000ff [ 30.909444@0] [0x10000181]: 0x000000ff [ 30.909449@0] [0x10000182]: 0x00000003 [ 30.909453@0] [0x10000183]: 0x00000007 [ 30.909458@0] [0x10000184]: 0x0000003f [ 30.909462@0] [0x10000185]: 0x00000002 [ 30.909468@0] [0x10000187]: 0x000000ff [ 30.909473@0] [0x10000188]: 0x00000003 [ 30.920844@5] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 30.922864@5] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 30.924880@5] hdmitx: ddc rd8b error 0x54 0x21 [ 31.040852@1] hdmitx: system: PHY Setting Done [ 31.044880@1] Sink is HDMI device [ 31.044898@1] hdmitx: system: packet: can't get vendor data [ 31.044905@1] 1080p60hz 60 1 [ 31.044911@1] 1080p60hz 60 1 [ 31.044915@1] hdmtix: set audio [ 31.044926@1] hdmitx tx_aud_src = 0 [ 31.044954@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 31.044958@1] hdmitx aud_n_para = 6272 [ 31.044976@1] hdmitx set channel status [ 31.045034@1] hdmitx: audio: Audio Type: PCM [ 31.045068@1] fb: current vmode=1080p60hz, cmd: 0x10000 ################################################################################ # ... output of lsmod # LibreELEC release: S912.arm-8.90.3 # ################################################################################ Module Size Used by hci_uart 30014 1 bluetooth 337922 2 hci_uart 6lowpan_iphc 10191 1 bluetooth rc_pinnacle_pctv_hd 1032 0 8021q 19007 0 em28xx_rc 8354 0 rc_core 23955 3 em28xx_rc,rc_pinnacle_pctv_hd em28xx_dvb 22440 0 dvb_core 103898 1 em28xx_dvb wlan 3449464 0 cfg80211 374890 1 wlan mali_kbase 379165 3 em28xx 71650 2 em28xx_dvb,em28xx_rc tveeprom 13844 1 em28xx v4l2_common 4009 1 em28xx wifi_dummy 806 0 amlvideodri 12674 0 videobuf_res 5386 1 amlvideodri videobuf_core 16659 2 amlvideodri,videobuf_res videodev 150833 2 amlvideodri,v4l2_common media 25477 3 em28xx,videodev,dvb_core dwc_otg 233041 0 fbcon 38031 0 bitblit 4436 1 fbcon softcursor 1168 1 bitblit font 7327 1 fbcon ################################################################################ # ... output of ps xa # LibreELEC release: S912.arm-8.90.3 # ################################################################################ PID USER TIME COMMAND 1 root 0:02 /usr/lib/systemd/systemd 2 root 0:00 [kthreadd] 3 root 0:00 [ksoftirqd/0] 4 root 0:00 [kworker/0:0] 5 root 0:00 [kworker/0:0H] 6 root 0:00 [kworker/u16:0] 7 root 0:00 [rcu_sched] 8 root 0:00 [rcu_bh] 9 root 0:00 [migration/0] 10 root 0:01 [migration/1] 11 root 0:00 [ksoftirqd/1] 12 root 0:00 [kworker/1:0] 13 root 0:00 [kworker/1:0H] 14 root 0:00 [migration/2] 15 root 0:00 [ksoftirqd/2] 16 root 0:00 [kworker/2:0] 17 root 0:00 [kworker/2:0H] 18 root 0:00 [migration/3] 19 root 0:00 [ksoftirqd/3] 20 root 0:00 [kworker/3:0] 21 root 0:00 [kworker/3:0H] 22 root 0:00 [migration/4] 23 root 0:00 [ksoftirqd/4] 24 root 0:00 [kworker/4:0] 25 root 0:00 [kworker/4:0H] 26 root 0:00 [migration/5] 27 root 0:00 [ksoftirqd/5] 28 root 0:00 [kworker/5:0] 29 root 0:00 [kworker/5:0H] 30 root 0:00 [migration/6] 31 root 0:00 [ksoftirqd/6] 32 root 0:00 [kworker/6:0] 33 root 0:00 [kworker/6:0H] 34 root 0:00 [migration/7] 35 root 0:00 [ksoftirqd/7] 36 root 0:00 [kworker/7:0] 37 root 0:00 [kworker/7:0H] 38 root 0:00 [khelper] 39 root 0:00 [kdevtmpfs] 40 root 0:00 [netns] 41 root 0:00 [kworker/u16:1] 45 root 0:00 [suspend] 1075 root 0:00 [writeback] 1078 root 0:00 [bioset] 1079 root 0:00 [crypto] 1081 root 0:00 [kblockd] 1096 root 0:00 [khubd] 1115 root 0:00 [devfreq_wq] 1221 root 0:00 [gp_pll] 1224 root 0:00 [kworker/0:1] 1229 root 0:00 [kworker/3:1] 1244 root 0:00 [kswapd0] 1293 root 0:00 [fsnotify_mark] 1328 root 0:00 [kthrotld] 1336 root 0:00 [kworker/1:1] 1372 root 0:00 [eth_moniter_tx_] 1409 root 0:00 [cfinteractive] 1410 root 0:00 [NULL_task_for_h] 1411 root 0:00 [cpu_hotplug_gdb] 1412 root 0:00 [cpu_idle_gdbs] 1451 root 0:00 [kworker/2:1] 1452 root 0:00 [kworker/3:1H] 1463 root 0:00 [kthread_hdcp] 1469 root 0:00 [irq/250-sd_emmc] 1472 root 0:00 [irq/249-sd_emmc] 1473 root 0:00 [kworker/u16:2] 1475 root 0:00 [irq/99-sd_in] 1476 root 0:00 [irq/101-sd_out] 1477 root 0:00 [irq/248-sd_emmc] 1481 root 0:00 [vmalloc_ion] 1482 root 0:00 [codec_mm_ion] 1483 root 0:00 [carveout_ion] 1490 root 0:00 [ge2d_monitor] 1509 root 0:00 [irq/76-vdec-1] 1510 root 0:00 [vdec-core] 1533 root 0:00 [irq/35-vsync] 1542 root 0:00 [kthread_di] 1554 root 0:00 [kworker/0:2] 1555 root 0:00 [kworker/5:1] 1556 root 0:00 [kworker/4:1] 1557 root 0:00 [kworker/4:2] 1558 root 0:00 [kworker/5:2] 1560 root 0:00 [kworker/6:1] 1562 root 0:00 [mmcqd/0] 1563 root 0:00 [mmcqd/0boot0] 1564 root 0:00 [mmcqd/0boot1] 1565 root 0:00 [mmcqd/0rpmb] 1592 root 0:00 [mmcqd/0] 1631 root 0:00 [cec_work] 1658 root 0:00 [kworker/2:2] 1659 root 0:00 [kworker/u16:3] 1674 root 0:00 [ipv6_addrconf] 1678 root 0:00 [deferwq] 1679 root 0:00 [kworker/7:1] 1740 root 0:00 [dwc_otg] 1752 root 0:00 [jbd2/mmcblk1p2-] 1753 root 0:00 [ext4-rsv-conver] 1767 root 0:00 [loop0] 1807 root 0:00 /bin/sh 1858 root 0:00 /usr/lib/systemd/systemd-journald 2125 root 0:00 [kworker/0:3] 2128 root 0:00 /usr/bin/rpcbind -f 2504 root 0:00 /usr/lib/systemd/systemd-udevd 2515 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd 2517 root 0:00 /usr/bin/pulseaudio --system 2529 dbus 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only 2537 root 0:00 /usr/lib/systemd/systemd-logind 2542 root 0:00 /usr/sbin/sshd -D 2543 root 0:00 /sbin/crond -f -S 2572 root 0:00 [kworker/7:2] 2598 root 0:00 [kworker/u17:0] 2600 root 0:00 [kbase_job_fault] 2601 root 0:00 [kworker/u17:1] 2613 avahi 0:00 avahi-daemon: running [LibreELEC.local] 2646 root 0:00 [cfg80211] 2649 root 0:00 /usr/bin/wpa_supplicant -u 2651 root 0:00 /usr/lib/systemd/systemd-hostnamed 2702 root 0:00 /usr/sbin/nmbd 2755 root 0:00 /usr/sbin/smbd 2758 root 0:00 [AR6K Async] 2761 root 0:00 [VosWDThread] 2763 root 0:00 [VosMCThread] 2764 root 0:00 [VosTXThread] 2765 root 0:00 [VosRXThread] 2766 root 0:00 [VosTlshimRxThre] 2768 root 0:00 {smbd-notifyd} /usr/sbin/smbd 2769 root 0:00 {cleanupd} /usr/sbin/smbd 2780 root 0:00 {lpqd} /usr/sbin/smbd 2819 root 0:00 [ksdioirqd/sdio] 2840 root 0:00 [wlan_logging_th] 2843 root 0:00 /usr/bin/hciattach -n -s 115200 /dev/ttyS1 qca 2000000 2855 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf 2857 root 0:00 [kworker/6:2] 2868 root 0:00 [hci0] 2869 root 0:00 [hci0] 2872 root 0:00 [kworker/u17:2] 2875 root 0:00 oscam -c /storage/.kodi/userdata/addon_data/service.softcam.oscam/config 2876 root 0:02 /storage/.kodi/addons/service.tvheadend44/bin/tvheadend -B -C -u root -g video -c /storage/.kodi/userdata/addon_data/service.tvheadend44 2889 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs --lircdev /run/lirc/lircd 2890 root 0:00 /bin/sh /usr/sbin/getlibwidevine.sh 2898 root 0:00 [kworker/3:2] 2901 root 0:00 sleep 30s 2904 root 0:10 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd 2915 root 0:00 oscam -c /storage/.kodi/userdata/addon_data/service.softcam.oscam/config 2949 root 0:00 [kworker/u16:4] 2950 root 0:00 [kbase_event] 2962 root 0:00 [kworker/0:1H] 3048 root 0:00 /usr/sbin/smbd 3049 root 0:00 sh -c createlog 3050 root 0:00 {createlog} /bin/sh /usr/bin/createlog 3075 root 0:00 ps xa ################################################################################ # ... output of cat /storage/.config/modprobe.d/disable-spdif-for-hd-audio.conf # LibreELEC release: S912.arm-8.90.3 # ################################################################################ # INTEL HBR WORKAROUND FOR DTS-MA & Dolby TrueHD PLAYBACK # Uncomment the following lines to disable any S/PDIF out to deliver # bitstreamed audio on Intel builds. This is a rough workaround for # users that have both S/PDIF and HDMI audio outputs on their motherboard # or motherboard+discrete graphics combo. # EVEN IF YOU ARE NOT USING THE S/PDIF OUTPUT # but still have one, you will need to uncomment the lines below ! # after uncommenting these lines, you must reboot for these settings to take effect # blacklist snd_hda_codec_realtek # blacklist snd_hda_codec_sigmatel # blacklist snd_hda_codec_cirrus ################################################################################ # ... output of ls -laR /storage/.config/system.d # LibreELEC release: S912.arm-8.90.3 # ################################################################################ /storage/.config/system.d: total 40 drwxr-xr-x 3 root root 1024 Jan 23 19:51 . drwxr-xr-x 15 root root 1024 Dec 14 23:09 .. -rw-rw-r-- 1 root root 28816 Jan 14 05:54 README -rw-r--r-- 1 root root 1772 Jan 23 19:51 cifs.mount.sample drwxr-xr-x 2 root root 1024 Feb 3 12:19 kodi.target.wants -rw-r--r-- 1 root root 1729 Jan 23 19:51 nfs.mount.sample -rw-r--r-- 1 root root 1145 Jan 23 19:51 openvpn.service.sample lrwxrwxrwx 1 root root 82 Feb 3 12:19 service.softcam.oscam.service -> /storage/.kodi/addons/service.softcam.oscam/system.d/service.softcam.oscam.service lrwxrwxrwx 1 root root 78 Feb 2 22:25 service.tvheadend44.service -> /storage/.kodi/addons/service.tvheadend44/system.d/service.tvheadend44.service /storage/.config/system.d/kodi.target.wants: total 4 drwxr-xr-x 2 root root 1024 Feb 3 12:19 . drwxr-xr-x 3 root root 1024 Jan 23 19:51 .. lrwxrwxrwx 1 root root 82 Feb 3 12:19 service.softcam.oscam.service -> /storage/.kodi/addons/service.softcam.oscam/system.d/service.softcam.oscam.service lrwxrwxrwx 1 root root 78 Feb 2 22:25 service.tvheadend44.service -> /storage/.kodi/addons/service.tvheadend44/system.d/service.tvheadend44.service