[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.59 (chewitt@buildbox) (gcc version 6.2.0 (GCC) ) #1 SMP Sun Oct 29 19:27:50 GMT 2017 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] cma: Reserved 8 MiB at 0x2f800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 196608 [ 0.000000] free_area_init_node: node 0, pgdat 80c35f00, node_mem_map af136000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @af0f0000 s25420 r8192 d23732 u57344 [ 0.000000] pcpu-alloc: s25420 r8192 d23732 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194880 [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 758304K/786432K available (6144K kernel code, 220K rwdata, 1372K rodata, 3072K init, 394K bss, 19936K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xb0800000 - 0xff800000 (1264 MB) [ 0.000000] lowmem : 0x80000000 - 0xb0000000 ( 768 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80700000 (7136 kB) [ 0.000000] .init : 0x80900000 - 0x80c00000 (3072 kB) [ 0.000000] .data : 0x80c00000 - 0x80c373e0 ( 221 kB) [ 0.000000] .bss : 0x80c39000 - 0x80c9b9ac ( 395 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000017] Switching to timer-based delay loop, resolution 52ns [ 0.000202] Console: colour dummy device 80x30 [ 0.000216] console [tty0] enabled [ 0.000232] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000) [ 0.000246] pid_max: default: 32768 minimum: 301 [ 0.000376] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000384] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001194] Disabling memory control group subsystem [ 0.001228] CPU: Testing write buffer coherency: ok [ 0.001555] CPU0: update cpu_capacity 1024 [ 0.001562] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001589] Setting up static identity map for 0x100000 - 0x100034 [ 0.003185] CPU1: update cpu_capacity 1024 [ 0.003192] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.003813] CPU2: update cpu_capacity 1024 [ 0.003820] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.004401] CPU3: update cpu_capacity 1024 [ 0.004407] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.004485] Brought up 4 CPUs [ 0.004493] SMP: Total of 4 processors activated (153.00 BogoMIPS). [ 0.004497] CPU: All CPU(s) started in HYP mode. [ 0.004500] CPU: Virtualization extensions available. [ 0.005062] devtmpfs: initialized [ 0.014974] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.015208] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.015223] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.015697] pinctrl core: initialized pinctrl subsystem [ 0.016540] NET: Registered protocol family 16 [ 0.018571] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.033343] cpuidle: using governor ladder [ 0.046708] cpuidle: using governor menu [ 0.047185] Serial: AMBA PL011 UART driver [ 0.048822] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.049280] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.101015] bcm2835-dma 3f007000.dma: DMA legacy API manager at b080f000, dmachans=0x1 [ 0.102614] SCSI subsystem initialized [ 0.102892] usbcore: registered new interface driver usbfs [ 0.102962] usbcore: registered new interface driver hub [ 0.103039] usbcore: registered new device driver usb [ 0.103597] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-24 17:13 [ 0.104803] clocksource: Switched to clocksource arch_sys_counter [ 0.105088] FS-Cache: Loaded [ 0.115872] NET: Registered protocol family 2 [ 0.116561] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.116668] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.116852] TCP: Hash tables configured (established 8192 bind 8192) [ 0.116936] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.116977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.117170] NET: Registered protocol family 1 [ 0.117499] RPC: Registered named UNIX socket transport module. [ 0.117503] RPC: Registered udp transport module. [ 0.117507] RPC: Registered tcp transport module. [ 0.117511] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.253144] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.267244] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.268626] FS-Cache: Netfs 'nfs' registered for caching [ 0.269519] NFS: Registering the id_resolver key type [ 0.269540] Key type id_resolver registered [ 0.269545] Key type id_legacy registered [ 0.269558] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.269817] FS-Cache: Netfs 'cifs' registered for caching [ 0.272959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.272966] io scheduler noop registered (default) [ 0.272971] io scheduler deadline registered [ 0.273196] io scheduler cfq registered [ 0.278565] BCM2708FB: allocated DMA memory ef910000 [ 0.278597] BCM2708FB: allocated DMA channel 0 @ b080f000 [ 0.286453] Console: switching to colour frame buffer device 82x26 [ 0.291698] bcm2835-rng 3f104000.rng: hwrng registered [ 0.291800] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.292282] vc-sm: Videocore shared memory driver [ 0.305142] brd: module loaded [ 0.305295] loop: module loaded [ 0.308588] nbd: registered device at major 43 [ 0.320056] usbcore: registered new interface driver rtsx_usb [ 0.320064] Loading iSCSI transport class v2.0-870. [ 0.320457] iscsi: registered transport (tcp) [ 0.320935] libphy: Fixed MDIO Bus: probed [ 0.320940] tun: Universal TUN/TAP device driver, 1.6 [ 0.320944] tun: (C) 1999-2004 Max Krasnyansky [ 0.321219] usbcore: registered new interface driver dm9601 [ 0.321299] usbcore: registered new interface driver smsc95xx [ 0.321331] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.549367] Core Release: 2.80a [ 0.549375] Setting default values for core params [ 0.549398] Finished setting default values for core params [ 0.749743] Using Buffer DMA mode [ 0.749748] Periodic Transfer Interrupt Enhancement - disabled [ 0.749752] Multiprocessor Interrupt Enhancement - disabled [ 0.749758] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.749769] Dedicated Tx FIFOs mode [ 0.750083] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xaf904000 dma = 0xef904000 len=9024 [ 0.750106] FIQ FSM acceleration enabled for : [ 0.750106] Non-periodic Split Transactions [ 0.750106] Periodic Split Transactions [ 0.750106] High-Speed Isochronous Endpoints [ 0.750106] Interrupt/Control Split Transaction hack enabled [ 0.750112] dwc_otg: Microframe scheduler enabled [ 0.750155] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80532f40 [ 0.750164] WARN::hcd_init_fiq:460: FIQ ASM at 0x805332a0 length 36 [ 0.750175] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb087e000 [ 0.750226] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.750259] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.750288] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.750334] Init: Port Power? op_state=1 [ 0.750337] Init: Power Port (0) [ 0.750509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.750519] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.750526] usb usb1: Product: DWC OTG Controller [ 0.750534] usb usb1: Manufacturer: Linux 4.9.59 dwc_otg_hcd [ 0.750541] usb usb1: SerialNumber: 3f980000.usb [ 0.751231] hub 1-0:1.0: USB hub found [ 0.751264] hub 1-0:1.0: 1 port detected [ 0.751879] dwc_otg: FIQ enabled [ 0.751883] dwc_otg: NAK holdoff enabled [ 0.751887] dwc_otg: FIQ split-transaction FSM enabled [ 0.751898] Module dwc_common_port init [ 0.752096] usbcore: registered new interface driver usb-storage [ 0.752292] mousedev: PS/2 mouse device common for all mice [ 0.752437] i2c /dev entries driver [ 0.753724] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.753983] bcm2835-cpufreq: min=600000 max=1200000 [ 0.754440] sdhci: Secure Digital Host Controller Interface driver [ 0.754443] sdhci: Copyright(c) Pierre Ossman [ 0.754707] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe [ 0.756887] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.756974] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.761035] ledtrig-cpu: registered to indicate activity on CPUs [ 0.761132] hidraw: raw HID events driver (C) Jiri Kosina [ 0.762028] usbcore: registered new interface driver usbhid [ 0.762030] usbhid: USB HID core driver [ 0.762426] vchiq: vchiq_init_state: slot_zero = 0xaf980000, is_master = 0 [ 0.763300] [vc_sm_connected_init]: start [ 0.770046] [vc_sm_connected_init]: end - returning 0 [ 0.770709] NET: Registered protocol family 10 [ 0.771219] NET: Registered protocol family 17 [ 0.771270] Key type dns_resolver registered [ 0.771452] Registering SWP/SWPB emulation handler [ 0.775301] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.775343] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.776132] sdhost: log_buf @ af907000 (ef907000) [ 0.828142] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.830142] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.830146] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 0.881523] console [netcon0] enabled [ 0.881525] netconsole: network logging started [ 0.881527] of_cfs_init [ 0.881581] of_cfs_init: OK [ 0.883991] Freeing unused kernel memory: 3072K [ 0.901962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.903487] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.905026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.907775] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.925438] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.928951] mmc0: new high speed SDHC card at address aaaa [ 0.929345] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 0.930653] mmcblk0: p1 p2 [ 0.954480] random: fast init done [ 0.958203] Indeed it is in host mode hprt0 = 00021501 [ 1.058391] mmc1: new high speed SDIO card at address 0001 [ 1.131485] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.131564] Indeed it is in host mode hprt0 = 00001101 [ 1.321716] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.321724] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.322189] hub 1-1:1.0: USB hub found [ 1.322236] hub 1-1:1.0: 5 ports detected [ 1.375475] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.375863] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.403480] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.601528] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.691660] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 1.691667] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.694124] smsc95xx v1.0.5 [ 1.743423] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:0a:38:1a [ 1.831533] usb 1-1.5: new high-speed USB device number 4 using dwc_otg [ 1.878536] systemd[1]: System time before build time, advancing clock. [ 1.890306] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 1.890587] systemd[1]: Detected architecture arm. [ 1.890751] systemd[1]: Set hostname to . [ 1.923903] usb 1-1.5: New USB device found, idVendor=2040, idProduct=b123 [ 1.923911] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.923915] usb 1-1.5: Product: Hauppauge Device [ 1.923918] usb 1-1.5: Manufacturer: Hauppauge [ 1.923922] usb 1-1.5: SerialNumber: 4035540741 [ 2.034261] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.034548] systemd[1]: Listening on Journal Socket. [ 2.035161] systemd[1]: Created slice User and Session Slice. [ 2.035295] systemd[1]: Listening on udev Control Socket. [ 2.035453] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.035685] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.035734] systemd[1]: Reached target RPC Port Mapper. [ 2.207588] systemd-journald[216]: Received request to flush runtime journal from PID 1 [ 2.741892] random: crng init done [ 3.210303] Console: switching to colour dummy device 80x30 [ 3.275975] usb 1-1.2: new high-speed USB device number 5 using dwc_otg [ 3.319368] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 3.351397] rc_core: loading out-of-tree module taints kernel. [ 3.351400] rc_core: loading out-of-tree module taints kernel. [ 3.351402] rc_core: loading out-of-tree module taints kernel. [ 3.352258] WARNING: You are using an experimental version of the media stack. [ 3.352258] As the driver is backported to an older kernel, it doesn't offer [ 3.352258] enough quality for its usage in production. [ 3.352258] Use it with care. [ 3.352258] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 3.352258] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers. [ 3.365627] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5583 [ 3.365637] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.365641] usb 1-1.2: Product: Ultra Fit [ 3.365645] usb 1-1.2: Manufacturer: SanDisk [ 3.365648] usb 1-1.2: SerialNumber: 4C531001510218104495 [ 3.366313] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 3.367824] scsi host0: usb-storage 1-1.2:1.0 [ 3.398899] Linux video capture interface: v2.00 [ 3.398911] WARNING: You are using an experimental version of the media stack. [ 3.398911] As the driver is backported to an older kernel, it doesn't offer [ 3.398911] enough quality for its usage in production. [ 3.398911] Use it with care. [ 3.398911] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 3.398911] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers. [ 3.600406] usbcore: registered new interface driver brcmfmac [ 3.860649] cx231xx 1-1.5:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:b123) with 7 interfaces [ 3.860789] cx231xx 1-1.5:1.1: Identified as Hauppauge WinTV-HVR-955Q (111401) (card=21) [ 3.862367] i2c i2c-4: Added multiplexed i2c bus 6 [ 3.862539] i2c i2c-4: Added multiplexed i2c bus 7 [ 4.007767] brcmfmac: Firmware version = wl0: Aug 7 2017 00:46:29 version 7.45.41.46 (r666254 CY) FWID 01-f8a78378 [ 4.009470] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.41 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-08-07 00:37:47 [ 4.034948] cx25840 3-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) [ 4.058673] uart-pl011 3f201000.serial: no DMA platform data [ 4.076991] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 4.077141] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.372673] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 4.374425] sd 0:0:0:0: [sda] 242614272 512-byte logical blocks: (124 GB/116 GiB) [ 4.375915] sd 0:0:0:0: [sda] Write Protect is off [ 4.375925] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.376184] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.392766] sda: [mac] sda1 sda2 sda3 [ 4.394663] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.923333] fuse init (API version 7.26) [ 5.735925] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.736959] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 5.741594] 8021q: 802.1Q VLAN Support v1.8 [ 6.063230] cx25840 3-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) [ 6.122260] tveeprom: Hauppauge model 111401, rev E1I6, serial# 4035540741 [ 6.122266] tveeprom: MAC address is 00:0d:fe:89:77:05 [ 6.122269] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 6.122272] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 6.122275] tveeprom: audio processor is CX23102 (idx 47) [ 6.122278] tveeprom: decoder processor is CX23102 (idx 46) [ 6.122281] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 6.122291] cx231xx 1-1.5:1.1: v4l2 driver version 0.0.3 [ 6.181017] cx231xx 1-1.5:1.1: Unknown tuner type configuring SIF [ 6.206825] cx231xx 1-1.5:1.1: Registered video device video0 [v4l2] [ 6.206936] cx231xx 1-1.5:1.1: Registered VBI device vbi0 [ 6.206944] cx231xx 1-1.5:1.1: video EndPoint Addr 0x84, Alternate settings: 5 [ 6.206951] cx231xx 1-1.5:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 [ 6.206956] cx231xx 1-1.5:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 [ 6.206962] cx231xx 1-1.5:1.1: TS EndPoint Addr 0x81, Alternate settings: 6 [ 6.207131] usbcore: registered new interface driver cx231xx [ 6.232016] WARNING: You are using an experimental version of the media stack. [ 6.232016] As the driver is backported to an older kernel, it doesn't offer [ 6.232016] enough quality for its usage in production. [ 6.232016] Use it with care. [ 6.232016] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): [ 6.232016] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers. [ 6.312718] si2157 7-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6.312771] dvbdev: DVB: registering new adapter (cx231xx #0) [ 6.312788] cx231xx 1-1.5:1.1: DVB: registering adapter 0 frontend -1 (lectronics LGDT3306A VSB/QAM Frontend)... [ 6.313680] cx231xx 1-1.5:1.1: Successfully loaded cx231xx-dvb [ 6.313689] cx231xx 1-1.5:1.1: Cx231xx dvb Extension initialized [ 7.098877] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 7.100965] Bridge firewalling registered [ 7.109878] nf_conntrack version 0.5.0 (12288 buckets, 49152 max) [ 7.145525] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.382995] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.069170] Bluetooth: Core ver 2.22 [ 9.069223] NET: Registered protocol family 31 [ 9.069226] Bluetooth: HCI device and connection manager initialized [ 9.069238] Bluetooth: HCI socket layer initialized [ 9.069244] Bluetooth: L2CAP socket layer initialized [ 9.069260] Bluetooth: SCO socket layer initialized [ 9.073517] Bluetooth: HCI UART driver ver 2.3 [ 9.073525] Bluetooth: HCI UART protocol H4 registered [ 9.073529] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 9.073626] Bluetooth: HCI UART protocol Broadcom registered [ 10.072431] docker0: port 1(veth2d46546) entered blocking state [ 10.072441] docker0: port 1(veth2d46546) entered disabled state [ 10.072717] device veth2d46546 entered promiscuous mode [ 10.073003] IPv6: ADDRCONF(NETDEV_UP): veth2d46546: link is not ready [ 10.073011] docker0: port 1(veth2d46546) entered blocking state [ 10.073016] docker0: port 1(veth2d46546) entered forwarding state [ 10.073955] docker0: port 1(veth2d46546) entered disabled state [ 10.079699] docker0: port 2(veth8008fff) entered blocking state [ 10.079709] docker0: port 2(veth8008fff) entered disabled state [ 10.080047] device veth8008fff entered promiscuous mode [ 10.080324] IPv6: ADDRCONF(NETDEV_UP): veth8008fff: link is not ready [ 10.082760] docker0: port 3(veth9f207ab) entered blocking state [ 10.082770] docker0: port 3(veth9f207ab) entered disabled state [ 10.083038] device veth9f207ab entered promiscuous mode [ 10.083280] IPv6: ADDRCONF(NETDEV_UP): veth9f207ab: link is not ready [ 10.083295] docker0: port 3(veth9f207ab) entered blocking state [ 10.083300] docker0: port 3(veth9f207ab) entered forwarding state [ 10.086224] docker0: port 4(vetheab9590) entered blocking state [ 10.086234] docker0: port 4(vetheab9590) entered disabled state [ 10.086492] device vetheab9590 entered promiscuous mode [ 10.086748] IPv6: ADDRCONF(NETDEV_UP): vetheab9590: link is not ready [ 10.086758] docker0: port 4(vetheab9590) entered blocking state [ 10.086763] docker0: port 4(vetheab9590) entered forwarding state [ 10.087306] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 10.090536] docker0: port 3(veth9f207ab) entered disabled state [ 10.090732] docker0: port 4(vetheab9590) entered disabled state [ 12.935031] si2157 7-0060: found a 'Silicon Labs Si2157-A30' [ 12.983778] si2157 7-0060: firmware version: 3.0.5 [ 12.983840] Unable to handle kernel paging request at virtual address a8c33800 [ 12.983844] pgd = a8ef0000 [ 12.983847] [a8c33800] *pgd=28c1141e(bad) [ 12.983863] Internal error: Oops: 8000000d [#1] SMP ARM [ 12.983883] Modules linked in: veth hci_uart btbcm bluetooth ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack br_netfilter bridge stp llc overlay si2157(O) lgdt3306a cx231xx_dvb_ci(O) tas2101(O) dvb_core(O) 8021q fuse cx25840(O) cx231xx(O) videobuf_vmalloc(O) videobuf_core(O) cx2341x(O) tveeprom(O) brcmfmac i2c_mux v4l2_common(O) brcmutil videodev(O) cfg80211 rc_core(O) rfkill bcm2835_gpiomem fixed [ 12.984006] CPU: 2 PID: 658 Comm: tvheadend Tainted: G O 4.9.59 #1 [ 12.984015] Hardware name: BCM2835 [ 12.984022] task: a8db3900 task.stack: a8cc6000 [ 12.984033] PC is at 0xa8c33800 [ 12.984056] LR is at dvb_frontend_ioctl_properties+0x6e0/0xd18 [dvb_core] [ 12.984067] pc : [] lr : [<7f5081ec>] psr: a0090113 [ 12.984067] sp : a8cc7c00 ip : a8cc7b88 fp : a8cc7e0c [ 12.984081] r10: a2176200 r9 : 00000000 r8 : ae0a0780 [ 12.984089] r7 : a8cc7e40 r6 : 00000000 r5 : a8c33808 r4 : a2176200 [ 12.984098] r3 : a8c33800 r2 : 00000000 r1 : a2176200 r0 : a8c33808 [ 12.984109] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 12.984119] Control: 10c5383d Table: 28ef006a DAC: 00000055 [ 12.984127] Process tvheadend (pid: 658, stack limit = 0xa8cc6210) [ 12.984137] Stack: (0xa8cc7c00 to 0xa8cc8000) [ 12.984148] 7c00: a8cc7c4c a8cc7c10 8017c47c 805826e4 0005fe3d 00000000 00000006 00000002 [ 12.984161] 7c20: 00000001 00000000 00000009 00000002 00000000 00000004 00000004 00000000 [ 12.984173] 7c40: 00000009 00000009 00000002 00000006 00000000 00000000 00000000 00000000 [ 12.984199] 7c60: 00000000 00000000 00000000 00000009 00000006 00000000 00000000 00000009 [ 12.984223] 7c80: 00000006 00000000 00000000 00000009 00000006 00000000 ffffffff ffffffff [ 12.984248] 7ca0: 00000000 00000000 00000000 00000000 ffffffff 00000001 00000000 00000000 [ 12.984272] 7cc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984296] 7ce0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984320] 7d00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984345] 7d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984369] 7d40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984393] 7d60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984417] 7d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984442] 7da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.984466] 7dc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000002 [ 12.984491] 7de0: a8cc7e0c 80086f53 ade1d598 ae0a0780 a8c33808 a8cc7e40 00000000 ae0a0780 [ 12.984516] 7e00: a8cc7e34 a8cc7e10 7f5088f8 7f507b18 80086f53 00000008 00000002 7eaae83c [ 12.984541] 7e20: a8cc7e40 00000000 a8cc7eec a8cc7e38 7f4fe8a0 7f508830 807c5f64 7f508824 [ 12.984565] 7e40: 00000001 7eaae8b4 00000041 00000000 00000000 00000006 00000002 00000002 [ 12.984590] 7e60: a8e23b48 ae8eb210 aa451d48 a8cc7e78 80203f68 80203be0 00000000 00000013 [ 12.984616] 7e80: a8cc7ea8 a8cc7f5c 00000001 80107b84 a8cc6000 00000000 a8cc7f4c a8cc7ea8 [ 12.984641] 7ea0: 802049e4 801fe5b4 ae8eb210 aa451d48 8c730ef0 00000009 aa0ce022 a8cc7ec8 [ 12.984665] 7ec0: 00000000 7eaae83c a8e23b48 ae0a0780 00000013 7eaae83c a8cc6000 00000000 [ 12.984690] 7ee0: a8cc7efc a8cc7ef0 7f4fe984 7f4fe7f4 a8cc7f7c a8cc7f00 80206f44 7f4fe968 [ 12.984715] 7f00: 80213528 806cf2e0 80213354 aa0ce000 ae0a0780 aa0ce000 00000020 ae0a0788 [ 12.984740] 7f20: a8e23b48 00000000 a8cc7f54 a8cc7f38 80213880 806d2a5c 00000013 7eaae8b4 [ 12.984765] 7f40: 00000013 00000001 80086f53 7eaae83c a8cc7f6c ae0a0781 00000013 ae0a0780 [ 12.984790] 7f60: 80086f53 7eaae83c a8cc6000 00000000 a8cc7fa4 a8cc7f80 802076e4 80206ea8 [ 12.984816] 7f80: 7eaae8b4 7eaae848 00000001 00000036 80107b84 a8cc6000 00000000 a8cc7fa8 [ 12.984840] 7fa0: 801079e0 802076b4 7eaae8b4 7eaae848 00000013 80086f53 7eaae83c 0000002c [ 12.984865] 7fc0: 7eaae8b4 7eaae848 00000001 00000036 7eaae83c 00000001 00000013 00000000 [ 12.984890] 7fe0: 00c56c3c 7eaae7e4 004fa2c4 76c0ccec 400f0010 00000013 2f7fa861 2f7fac61 [ 12.984910] Backtrace: [ 12.984967] [<7f507b0c>] (dvb_frontend_ioctl_properties [dvb_core]) from [<7f5088f8>] (dvb_frontend_ioctl+0xd4/0x10c [dvb_core]) [ 12.985000] r10:ae0a0780 r9:00000000 r8:a8cc7e40 r7:a8c33808 r6:ae0a0780 r5:ade1d598 [ 12.985022] r4:80086f53 [ 12.985057] [<7f508824>] (dvb_frontend_ioctl [dvb_core]) from [<7f4fe8a0>] (dvb_usercopy+0xb8/0x174 [dvb_core]) [ 12.985084] r9:00000000 r8:a8cc7e40 r7:7eaae83c r6:00000002 r5:00000008 r4:80086f53 [ 12.985127] [<7f4fe7e8>] (dvb_usercopy [dvb_core]) from [<7f4fe984>] (dvb_generic_ioctl+0x28/0x3c [dvb_core]) [ 12.985153] r10:00000000 r9:a8cc6000 r8:7eaae83c r7:00000013 r6:ae0a0780 r5:a8e23b48 [ 12.985175] r4:7eaae83c [ 12.985206] [<7f4fe95c>] (dvb_generic_ioctl [dvb_core]) from [<80206f44>] (do_vfs_ioctl+0xa8/0x80c) [ 12.985234] [<80206e9c>] (do_vfs_ioctl) from [<802076e4>] (SyS_ioctl+0x3c/0x64) [ 12.985259] r10:00000000 r9:a8cc6000 r8:7eaae83c r7:80086f53 r6:ae0a0780 r5:00000013 [ 12.985281] r4:ae0a0781 [ 12.985300] [<802076a8>] (SyS_ioctl) from [<801079e0>] (ret_fast_syscall+0x0/0x34) [ 12.985325] r9:a8cc6000 r8:80107b84 r7:00000036 r6:00000001 r5:7eaae848 r4:7eaae8b4 [ 12.985349] Code: 15400c5d 9e223080 0e1e5039 5d6efb45 (aa2b1000) [ 12.985367] ---[ end trace 772782b19907849d ]--- [ 13.042804] eth0: renamed from veth49245d6 [ 13.062876] IPv6: ADDRCONF(NETDEV_CHANGE): veth2d46546: link becomes ready [ 13.063004] docker0: port 1(veth2d46546) entered blocking state [ 13.063023] docker0: port 1(veth2d46546) entered forwarding state [ 13.095992] eth0: renamed from veth0c8dcf0 [ 13.119737] IPv6: ADDRCONF(NETDEV_CHANGE): veth8008fff: link becomes ready [ 13.119894] docker0: port 2(veth8008fff) entered blocking state [ 13.119915] docker0: port 2(veth8008fff) entered forwarding state [ 13.146246] eth0: renamed from vetha5c33d1 [ 13.176891] IPv6: ADDRCONF(NETDEV_CHANGE): vetheab9590: link becomes ready [ 13.177015] docker0: port 4(vetheab9590) entered blocking state [ 13.177032] docker0: port 4(vetheab9590) entered forwarding state [ 13.261500] usb 1-1.3: new high-speed USB device number 6 using dwc_otg [ 13.279816] eth0: renamed from vethe62d4a3 [ 13.310168] IPv6: ADDRCONF(NETDEV_CHANGE): veth9f207ab: link becomes ready [ 13.310310] docker0: port 3(veth9f207ab) entered blocking state [ 13.310333] docker0: port 3(veth9f207ab) entered forwarding state [ 13.352696] usb 1-1.3: New USB device found, idVendor=1058, idProduct=1021 [ 13.352732] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.352755] usb 1-1.3: Product: Ext HDD 1021 [ 13.352770] usb 1-1.3: Manufacturer: Western Digital [ 13.352785] usb 1-1.3: SerialNumber: 574341563546383934303035 [ 13.353583] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 13.356692] scsi host1: usb-storage 1-1.3:1.0 [ 14.372407] scsi 1:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [ 14.374327] sd 1:0:0:0: [sdb] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB) [ 14.375031] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 14.375677] sd 1:0:0:0: [sdb] Asking for cache data failed [ 14.375706] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 14.390087] sdb: sdb1 [ 14.392512] sd 1:0:0:0: [sdb] Attached SCSI disk